AW: Parameter zu div. Emus
Unterhalte mich ja ungern mit mir selbst, aber dass das niemanden sonst interessiert ?
Wenn die User mal ihre Logs selber lesen könnten, wären wahrscheinlich viele Fragen überflüssig.
Nun gut, ich mach mal weiter:
CCcam (x86)
usage: CCcam [-d] [-C <configfile>]
-d run in the foreground (implies -v and -q)
-v be verbose
-q don't use syslog (use on old systems)
-C <configfile> use <configfile> instead of default (/var/etc/CCcam.cfg)
-f filter on specific demux data (saves some CPU,
but dreambox drivers might not like this too much)
-n show network packets
-s disable server
-t show timing
-l disable self-learning capabilities
Gbox (ppc,):
Hier wäre mir kein zusätzlicher Startparameter bekannt, einzig in der Datei "gbox_cfg" sind folgende Einträge möglich:
# Trace/Debug
# xx yz ; xx=00 no konsole output
# xx yz ; xx=01 konsole output
# xx yz ; y=0 debug output (dont use)
# xx yz ; y=1 no debug output
# xx yz ; z=0 ouput to konsole
# xx yz ; z=1 output to /var/tmp/debug.txt
# xx yz ; z=2 Output to UDP (to capture with gboxt)
Z: { 00 12 } 10.0.0.1 8024 # zum Mitlesen via zB MboxCenter
Z: { 01 10 } 10.0.0.1 8024 # zum Mitlesen an der Konsole, hier kommt bei mir aber sehr wenig
Z: { 01 11 } 10.0.0.1 8024 # schreibt in File - Achtung: Wenn der Speicher voll ist wird die Box abstürzen
mbox (bitte ev. ergänzen, hab´s nur kurz angetestet)
// Z option -> control sending/writing current informations
// Z: { xy } { IP port }
// x=0 -> don't print time stamp (in console screen and in debug file)
// x=1 -> print time stamp ( .... )
// y=0 -> no writing/sending informations to debug file/destination IP
// y=1 -> send informations to destination IP but not in debug file
// y=2 -> write informations to debug file but don't send to destination IP
// y=3 -> write/send informations to debug file/destination IP
// IP port -> destination IP and UDP port where to send informations
Z: { 11 } { 10.0.0.1 8024 } # zum Mitlesen via zB MboxCenter, andere Modi wie oben