OSEmu - ein MicroEmu, klein und simpel

For PowerVU the Stream Relay must be used:

IMPORTANT:
	The stream relay needs a fast CPU. Not every STB is fast enough.
	If you encounter problems like suttering, likely your CPU is too slow.

	For OSEmu it is required that the "Include ECM in http streams" setting is enabled.
	If your image supports it (openpli, openatv), you can find it here:
	OpenWebif -> Settings -> Customize
	
	If your image does not support it, the only option is to use oscam-emu.
	OSEmu's stream relay will NOT work without "Include ECM in http streams".
	
	Switch to oscam-emu if the option is not available.
	

Channel Config:
1. Go to the OpenWebif and click on the "Stream" button for the channel you want to add.
2. Download and save the .m3u file.
3. Open the .m3u file with a text edior and get the stream link. It looks like this:
	http://stb:8001/1:0:19:0123:3EF:1:C00000:0:0:0:
4. Replace the port (8001) with the relay port (default: 17999) and the host name ("stb") with 127.0.0.1
	[URL]https://127.0.0.1:17999/1:0:19:0123:3EF:1:C00000:0:0:0[/URL]:
5. Add the new stream link to your channel list (for example with DreamBoxEdit)

IMPORTANT:
	Do NOT use the correct Transponder ID/Network ID/Namespace for the stream link.
	Use Transponder ID: "11", Network ID: "22" and Namespace: "33".
	Set Service Type to "1", and enter the correct Service ID for the channel.

Note: 
	When using DreamBoxEdit:
	
	A. Go to the list in the middle "Bouquet details".
	B. Right click on a channel, select "IPTV and other streaming services", select "Add".
	C. Select "DVB/TS".
	D. Chosse a name and use the new stream link as URL.
	E. Use the "Service ID" of the original channel. You can find it in the left list ("Services")