Oscam Tivusat Easymouse2

[giovane]

Hi Leute,
habe gestern TIVUSAT Karte bekommen. Karte habe ich über Internet freigeschaltet.
Habe configs erstellt für EASYMOUSE2 Reader leider Fehlermeldung im Log.
Muss ich die Karte evtl. erst in einen Receiver legen oder stimmt etwas an meinen Configs nicht?
Bitte schaut mal drüber.
Konfiguration:
Ubuntu 12.0, Oscam Version:OSCAM 1.20-unstable_svn build r8625.
2 Reader:
1 Reader: WB *********** Smartmouse mit SKYKabelBW --> läuft astrein
2 Reader: Easymouse2 mit Tivusat --> läuft nicht

Hier die Log Datei:

Spoiler

2013/05/04 10:38:07 0 s newcamd: initialized (fd=5, port=15051, ip=XXX.XXX.XXX.XXX)
2013/05/04 10:38:07 0 s -> CAID: 098E PROVID: 000000
2013/05/04 10:38:07 0 s newcamd: initialized (fd=6, port=15052, ip=XXX.XXX.XXX.XXX)
2013/05/04 10:38:07 0 s -> CAID: 183D PROVID: 005411, 000000
2013/05/04 10:38:07 0 s V23 [mouse] creating thread for device /dev/skykbw
2013/05/04 10:38:07 0 s tivusat [mouse] creating thread for device /dev/tivusat
2013/05/04 10:38:07 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/05/04 10:38:07 0 s anti cascading disabled
2013/05/04 10:38:07 B7000468 h webif: decompressed 52456 bytes back into 150836 bytes
2013/05/04 10:38:07 B7000468 h HTTP Server listening on port 54322
2013/05/04 10:38:07 9764B98 r V23 [mouse] Reader initialized (device=/dev/skykbw, detect=cd, mhz=368, cardmhz=357)
2013/05/04 10:38:07 97667D8 r tivusat [mouse] Reader initialized (device=/dev/tivusat, detect=cd, mhz=368, cardmhz=368)
2013/05/04 10:38:08 97667D8 r tivusat [mouse] card detected
2013/05/04 10:38:08 9764B98 r V23 [mouse] card detected
2013/05/04 10:38:09 9764B98 r V23 [mouse] ATR: 3F FF 14 25 03 10 80 54 B0 01 69 FF 4A 50 70 00 00 4B 57 01 00 00
2013/05/04 10:38:09 9764B98 r V23 [mouse] Init card protocol T0, FI=1, F=372, D=8, N=3
2013/05/04 10:38:09 9764B98 r V23 [mouse] Setting baudrate to 76800 bps
2013/05/04 10:38:09 9764B98 r V23 [mouse] Calculated work ETU is 12.64 us
2013/05/04 10:38:09 9764B98 r V23 [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.68 Mhz (specified in reader->mhz)
2013/05/04 10:38:10 9764B98 r V23 [mouse] Card type: KWPE
2013/05/04 10:38:10 9764B98 r V23 [mouse] Rom version: 10T1
2013/05/04 10:38:11 9764B98 r V23 [mouse] No TA1 change for this card is possible by ins7E11
2013/05/04 10:38:11 9764B98 r V23 [mouse] parental lock setting: FF FF FF FF
2013/05/04 10:38:11 9764B98 r V23 [mouse] type: VideoGuard Kabel BW (098E), caid: 098E
2013/05/04 10:38:11 9764B98 r V23 [mouse] serial: ########, BoxID: ########, baseyear: 2004
2013/05/04 10:38:11 9764B98 r V23 [mouse] ready for requests
2013/05/04 10:38:11 9764B98 r V23 [mouse] found card system videoguard2
2013/05/04 10:38:11 9764B98 r V23 [videoguard2] card detected
2013/05/04 10:38:11 9764B98 r V23 [videoguard2] type: VideoGuard Kabel BW (098E)
2013/05/04 10:38:11 9764B98 r V23 [videoguard2] tier: 927e, expiry date: 2009/04/16-01:01:00
2013/05/04 10:38:11 9764B98 r V23 [videoguard2] tier: 007b, expiry date: 2013/06/26-01:00:00
2013/05/04 10:38:11 9764B98 r V23 [videoguard2] tier: 007d, expiry date: 2013/06/26-01:00:00
2013/05/04 10:38:11 9764B98 r V23 [videoguard2] tier: 0081, expiry date: 2013/06/26-01:00:00
2013/05/04 10:38:11 9764B98 r V23 [videoguard2] tier: 008e, expiry date: 2013/06/26-01:00:00
2013/05/04 10:38:11 9764B98 r V23 [videoguard2] tier: 00ac, expiry date: 2013/06/26-01:00:00
2013/05/04 10:38:11 9764B98 r V23 [videoguard2] tier: 00ad, expiry date: 2013/06/26-01:00:00
2013/05/04 10:38:11 9764B98 r V23 [videoguard2] tier: 00ae, expiry date: 2013/06/26-01:00:00
2013/05/04 10:38:11 9764B98 r V23 [videoguard2] tier: 00af, expiry date: 2013/06/26-01:00:00
2013/05/04 10:38:11 9764B98 r V23 [videoguard2] tier: 00b0, expiry date: 2013/06/26-01:00:00
2013/05/04 10:38:11 9764B98 r V23 [videoguard2] tier: 00ba, expiry date: 2013/06/26-01:00:00
2013/05/04 10:38:11 9764B98 r V23 [videoguard2] tier: 00f3, expiry date: 2013/06/26-01:00:00
2013/05/04 10:38:12 97667D8 r tivusat [mouse] Error activating card.
2013/05/04 10:38:21 0 --- Skipped 2 duplicated log lines ---
2013/05/04 10:38:21 97667D8 r tivusat [mouse] card initializing error

Und hier meine Configs:

OSCAM.CONF

Spoiler

[global]
serverip = 192.168.178.76
logfile = /var/log/oscam.log
nice = -1
maxlogsize = 128
waitforcards = 0
preferlocalcards = 1
dropdups = 1
lb_save = 150
failbantime = 1480
failbancount = 10

[webif]
HttpPort = 54322
HttpUser = oscam
HttpPWD = oscam
httphelplang = de
HttpRefresh = 10
HttpAllowed = 192.168.178.1-192.168.255.255

[newcamd]
port = 15051@098E:000000;15052@183D:005411,000000
key = 0102030405060708091011121314
keepalive = 1

Oscam.server

Spoiler

[reader]
Label = V23
enable = 1
Protocol = mouse
Device = /dev/skykbw
ins7e11 = 15
cardmhz = 357
Detect = CD
Group = 1
boxid = 12345678
CAID = 098E
mhz = 368
cardmhz = 357
EMMCache = 1,1,2 

[reader]
label = tivusat
enable = 1
protocol = mouse
device = /dev/tivusat
caid = 183D
detect = cd
rsakey = A.....8164B5
ideakey = 3..........7
mhz = 368
cardmhz = 368
ident = 183D:005411,000000
group = 1
emmcache = 1,1,2 
ecmcache = 1
lb_weight = 100
auprovid = 005411

Oscam.user

Spoiler

[account]
User = user1
Pwd = pw
AU = 1
cccmaxhops = 1
Group = 1 

[account]
User = user2
Pwd = pw
AU = 1
cccmaxhops = 1
Group = 1

[account]
User =user3
Pwd = pw
AU = 0
cccmaxhops = 1
Group = 1

[account]
User = user4
Pwd = pw
AU = 0
cccmaxhops = 1
Group = 1

[account]
User = user5
Pwd = pw
AU = 1
cccmaxhops = 1
Group = 1

Könnt ihr mir helfen?
Grüsse
Giovane

 

[hwmmc]

AW: Oscam Tivusat Easymouse2

ideakey = 3..........7

Was denn das?

 

[giovane]

AW: Oscam Tivusat Easymouse2

Stimmt, kommt wahrscheinlich von den vielen Tests.
Habe den Parameter komplett rausgenommen.
Gleiches Problem.

 

[giovane]

AW: Oscam Tivusat Easymouse2

Hi,
habe jetzt die Karte mal raus aus dem Reader und wieder rein.
Im Log steht:

Spoiler

2013/05/04 16:37:02  97667D8 r tivusat [mouse] card detected         
        2013/05/04 16:37:06  97667D8 r tivusat [mouse] Error activating card.         
        2013/05/04 16:37:14        0   --- Skipped 1 duplicated log lines ---         
        2013/05/04 16:37:15        0   --- Skipped 1 duplicated log lines ---         
        2013/05/04 16:37:15  97667D8 r tivusat [mouse] card initializing error

 

[hwmmc]

AW: Oscam Tivusat Easymouse2

Mal im Reader

protocol = smargo

setzen ... oder

smargopatch = 1

 

[giovane]

AW: Oscam Tivusat Easymouse2

Hi hwmmc,
das verstehe ich nicht.
Ist doch ein Easymouse2 und kein Smargo. Als Protocol gibt es auf dem Reader nur Phoenix und Mouse.
Nur zur Verdeutlichung: Diesen Reader habe ich:

Sie müssen registriert sein, um Links zu sehen.

Grüsse
Gio

 

[hwmmc]

AW: Oscam Tivusat Easymouse2

Willst du mit mir Diskutieren? ... dann mach nur smargopatch = 1

Wer die Regel kennt, darf sie auch brechen!

 

[giovane]

AW: Oscam Tivusat Easymouse2

Nein, möchte nicht diskutieren. Möchte es nur verstehen. Aber egal.
Habe den Tipp befolgt. Keine Veränderung. Sowohl protocol = smargo als auch smargopatch = 1.
Oscam.server sieht jetzt o aus:

Spoiler

[reader]
Label = V23
enable = 1
Protocol = mouse
Device = /dev/skykbw
ins7e11 = 15
cardmhz = 357
Detect = CD
Group = 1
boxid = 12345678
CAID = 098E
mhz = 368
cardmhz = 357
EMMCache = 1,1,2 

[reader]
label = tivusat
enable = 1
protocol = mouse
device = /dev/tivusat
smargopatch = 1
caid = 183D
detect = cd
rsakey = A.....4B5
mhz = 368
cardmhz = 368
ident = 183D:005411,000000
group = 1
emmcache = 1,1,2 
ecmcache = 1
lb_weight = 100
auprovid = 005411

Log sieht so aus:

Spoiler

2013/05/05 12:49:51        0 s newcamd: initialized (fd=5, port=15051, ip=192.168.178.76)         
        2013/05/05 12:49:51        0 s -> CAID: 098E PROVID: 000000         
        2013/05/05 12:49:51        0 s newcamd: initialized (fd=6, port=15052, ip=192.168.178.76)         
        2013/05/05 12:49:51        0 s -> CAID: 183D PROVID: 005411, 000000         
        2013/05/05 12:49:51        0 s V23 [mouse] creating thread for device /dev/skykbw         
        2013/05/05 12:49:51        0 s tivusat [mouse] creating thread for device /dev/tivusat         
        2013/05/05 12:49:51        0 s loadbalancer: can't read from file /tmp/.oscam/stat         
        2013/05/05 12:49:51        0 s anti cascading disabled         
        2013/05/05 12:49:51 B7000468 h webif: decompressed 52456 bytes back into 150836 bytes         
        2013/05/05 12:49:51 B7000468 h HTTP Server listening on port 54322         
        2013/05/05 12:49:51  8754B98 r V23 [mouse] Reader initialized (device=/dev/skykbw, detect=cd, mhz=368, cardmhz=357)         
        2013/05/05 12:49:51  87567D8 r tivusat [mouse] Reader initialized (device=/dev/tivusat, detect=cd, mhz=368, cardmhz=368)         
        2013/05/05 12:49:52  87567D8 r tivusat [mouse] card detected         
        2013/05/05 12:49:52  8754B98 r V23 [mouse] card detected         
        2013/05/05 12:49:53  8754B98 r V23 [mouse] ATR: 3F FF 14 25 03 10 80 54 B0 01 69 FF 4A 50 70 00 00 4B 57 01 00 00          
        2013/05/05 12:49:53  8754B98 r V23 [mouse] Init card protocol T0, FI=1, F=372, D=8, N=3         
        2013/05/05 12:49:53  8754B98 r V23 [mouse] Setting baudrate to 76800 bps         
        2013/05/05 12:49:53  8754B98 r V23 [mouse] Calculated work ETU is 12.64 us         
        2013/05/05 12:49:53  8754B98 r V23 [mouse] ATR Fsmax  is: 5 Mhz, clocking card to wanted user cardspeed of 3.68 Mhz  (specified in reader->mhz)         
        2013/05/05 12:49:54  8754B98 r V23 [mouse] Card type:   KWPE         
        2013/05/05 12:49:54  8754B98 r V23 [mouse] Rom version: 10T1         
        2013/05/05 12:49:54  8754B98 r V23 [mouse] No TA1 change for this card is possible by ins7E11         
        2013/05/05 12:49:54  8754B98 r V23 [mouse] parental lock setting: FF FF FF FF          
        2013/05/05 12:49:54  8754B98 r V23 [mouse] type: VideoGuard Kabel BW (098E), caid: 098E         
        2013/05/05 12:49:54  8754B98 r V23 [mouse] serial: ########, BoxID: ########, baseyear: 2004         
        2013/05/05 12:49:54  8754B98 r V23 [mouse] ready for requests         
        2013/05/05 12:49:54  8754B98 r V23 [mouse] found card system videoguard2         
        2013/05/05 12:49:54  8754B98 r V23 [videoguard2] card detected         
        2013/05/05 12:49:54  8754B98 r V23 [videoguard2] type: VideoGuard Kabel BW (098E)         
        2013/05/05 12:49:54  8754B98 r V23 [videoguard2] tier: 927e, expiry date: 2009/04/16-01:01:00          
        2013/05/05 12:49:54  8754B98 r V23 [videoguard2] tier: 007b, expiry date: 2013/06/26-01:00:00          
        2013/05/05 12:49:54  8754B98 r V23 [videoguard2] tier: 007d, expiry date: 2013/06/26-01:00:00          
        2013/05/05 12:49:54  8754B98 r V23 [videoguard2] tier: 0081, expiry date: 2013/06/26-01:00:00          
        2013/05/05 12:49:54  8754B98 r V23 [videoguard2] tier: 008e, expiry date: 2013/06/26-01:00:00          
        2013/05/05 12:49:54  8754B98 r V23 [videoguard2] tier: 00ac, expiry date: 2013/06/26-01:00:00          
        2013/05/05 12:49:54  8754B98 r V23 [videoguard2] tier: 00ad, expiry date: 2013/06/26-01:00:00          
        2013/05/05 12:49:54  8754B98 r V23 [videoguard2] tier: 00ae, expiry date: 2013/06/26-01:00:00          
        2013/05/05 12:49:54  8754B98 r V23 [videoguard2] tier: 00af, expiry date: 2013/06/26-01:00:00          
        2013/05/05 12:49:54  8754B98 r V23 [videoguard2] tier: 00b0, expiry date: 2013/06/26-01:00:00          
        2013/05/05 12:49:54  8754B98 r V23 [videoguard2] tier: 00ba, expiry date: 2013/06/26-01:00:00          
        2013/05/05 12:49:54  8754B98 r V23 [videoguard2] tier: 00f3, expiry date: 2013/06/26-01:00:00          
        2013/05/05 12:49:56  87567D8 r tivusat [mouse] Error activating card.         
        2013/05/05 12:50:05        0   --- Skipped 2 duplicated log lines ---         
        2013/05/05 12:50:05  87567D8 r tivusat [mouse] card initializing error

 

[hwmmc]

AW: Oscam Tivusat Easymouse2

Dann ist die Karte noch richtig aktiviert bzw. findet glaube gerade ein ROM Update statt.

 

[giovane]

AW: Oscam Tivusat Easymouse2

Ok,
was bedeutet das?
Muss ich noch was mit der Karte machen um sie "richtig" zu aktivieren?
Grüsse
Gio

 

[hwmmc]

AW: Oscam Tivusat Easymouse2

CI Modul oder Orginal Receiver ... updaten lassen.

 

[giovane]

Hi,
hab die Karte jetzt in einen Original Receiver rein. Hat nach kurzer Zeit funktioniert. Also RAI4 konnte ich ohne Probleme schauen.
Aber an meinem Reader tut es immer noch nicht.
Sowohl mit PROTOCOL=mouse als auch smargo hab ich keinen Erfolg:
Immer die gleiche Meldung:

Spoiler

2013/05/06 20:17:43  8A887D8 r tivusat [smargo] Error activating card.         
        2013/05/06 20:18:02        0   --- Skipped 2 duplicated log lines ---         
        2013/05/06 20:18:02  8A887D8 r tivusat [smargo] card initializing error         
        2013/05/06 20:19:29  8A887D8 r tivusat [smargo] card detected         
        2013/05/06 20:19:38  8A887D8 r tivusat [smargo] Error activating card.         
        2013/05/06 20:19:56        0   --- Skipped 1 duplicated log lines ---         
        2013/05/06 20:19:57        0   --- Skipped 1 duplicated log lines ---         
        2013/05/06 20:19:57  8A887D8 r tivusat [smargo] card initializing error

Die Jumper am Reader stehen übrigens wie folgt:
von Links:
1. Jumper = oben auf 3,3 V
2. Jumper = unten auf phoenix
3. Jumper = oben auf Pfeil
4. Jumper = oben auf 6 Mhz

Ist das korrekt?

Hab ein bisschane mit den Jumpern rumgespielt:
stehen jetzt so:
1. Jumper = oben auf 5 V
2. Jumper = unten auf phoenix
3. Jumper = unten auf 3,579 mhz
4. Jumper = oben auf 6 Mhz
Meldung im Log:

Spoiler

2013/05/06 20:37:39  9C8C7D8 r tivusat [smargo]  ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.68 Mhz  (specified in reader->mhz)         
        2013/05/06 20:37:40  9C8C7D8 r tivusat [smargo] card system not supported         
        2013/05/06 20:37:40  9C8C7D8 r tivusat [smargo] Normal mode failed, reverting to Deprecated Mode         
        2013/05/06 20:37:43  9C8C7D8 r tivusat [smargo] ATR: 3F FF 95 00 FF 91 81 71 FF 47 00 54 49 47 45          
        2013/05/06 20:37:43  9C8C7D8 r tivusat [smargo] Init card protocol T1, FI=9, F=512, D=16, N=255         
        2013/05/06 20:37:43  9C8C7D8 r tivusat [smargo] Calculated work ETU is 101.09 us         
        2013/05/06 20:37:43  9C8C7D8 r tivusat [smargo]  ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.68 Mhz  (specified in reader->mhz)         
        2013/05/06 20:37:44  9C8C7D8 r tivusat [smargo] card system not supported         
        2013/05/06 20:37:44  9C8C7D8 r tivusat [smargo] card initializing error

 

[giovane]

AW: Oscam Tivusat Easymouse2

Hi Leute,
bin nun echt am Verzweifeln. Habe glaube ich schon 17.000 configs durch. Alles ohne Erfolg.
Könnte mir bitte jemand seine config Posten mit TIVUSAT Karte und EASYMOUSE2 (oder ist das was seltenes?).
Meine momentante oscam.server sieht so aus:

Spoiler

[reader]
Label = V23
enable = 1
Protocol = mouse
Device = /dev/skykbw
ins7e11 = 15
cardmhz = 357
Detect = CD
Group = 1
boxid = 12345678
CAID = 098E
mhz = 368
cardmhz = 357
EMMCache = 1,1,2 

[reader]
label = tivusat
enable = 1
protocol = mouse
device = /dev/tivusat
smargopatch = 1
caid = 183D
detect = CD
rsakey = A9..............B5
mhz = 368
cardmhz = 368
group = 2
emmcache = 1,3,2

Log sieht so aus:

Spoiler

2013/05/07 20:45:31 8CEBB98 r V23 [mouse] Init card protocol T0, FI=1, F=372, D=8, N=3
2013/05/07 20:45:31 8CEBB98 r V23 [mouse] Setting baudrate to 76800 bps
2013/05/07 20:45:31 8CEBB98 r V23 [mouse] Calculated work ETU is 12.64 us
2013/05/07 20:45:31 8CEBB98 r V23 [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.68 Mhz (specified in reader->mhz)
2013/05/07 20:45:31 8CED7D8 r tivusat [mouse] ATR: 3F FF 95 00 FF 91 81 71 FF 47 00 54 49 47 45
2013/05/07 20:45:31 8CED7D8 r tivusat [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/05/07 20:45:31 8CED7D8 r tivusat [mouse] Setting baudrate to 111600 bps
2013/05/07 20:45:31 8CED7D8 r tivusat [mouse] Calculated work ETU is 8.96 us
2013/05/07 20:45:31 8CED7D8 r tivusat [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
2013/05/07 20:45:32 8CEBB98 r V23 [mouse] Card type: KWPE
2013/05/07 20:45:32 8CEBB98 r V23 [mouse] Rom version: 10T1
2013/05/07 20:45:32 8CEBB98 r V23 [mouse] No TA1 change for this card is possible by ins7E11
2013/05/07 20:45:32 8CEBB98 r V23 [mouse] parental lock setting: FF FF FF FF
2013/05/07 20:45:32 8CEBB98 r V23 [mouse] type: VideoGuard Kabel BW (098E), caid: 098E
2013/05/07 20:45:32 8CEBB98 r V23 [mouse] serial: ########, BoxID: ########, baseyear: 2004
2013/05/07 20:45:32 8CEBB98 r V23 [mouse] ready for requests
2013/05/07 20:45:32 8CEBB98 r V23 [mouse] found card system videoguard2
2013/05/07 20:45:32 8CEBB98 r V23 [videoguard2] card detected
2013/05/07 20:45:32 8CEBB98 r V23 [videoguard2] type: VideoGuard Kabel BW (098E)
2013/05/07 20:45:32 8CEBB98 r V23 [videoguard2] tier: 927e, expiry date: 2009/04/16-01:01:00
2013/05/07 20:45:32 8CEBB98 r V23 [videoguard2] tier: 007b, expiry date: 2013/06/26-01:00:00
2013/05/07 20:45:32 8CEBB98 r V23 [videoguard2] tier: 007d, expiry date: 2013/06/26-01:00:00
2013/05/07 20:45:32 8CEBB98 r V23 [videoguard2] tier: 0081, expiry date: 2013/06/26-01:00:00
2013/05/07 20:45:32 8CEBB98 r V23 [videoguard2] tier: 008e, expiry date: 2013/06/26-01:00:00
2013/05/07 20:45:32 8CEBB98 r V23 [videoguard2] tier: 00ac, expiry date: 2013/06/26-01:00:00
2013/05/07 20:45:32 8CEBB98 r V23 [videoguard2] tier: 00ad, expiry date: 2013/06/26-01:00:00
2013/05/07 20:45:32 8CEBB98 r V23 [videoguard2] tier: 00ae, expiry date: 2013/06/26-01:00:00
2013/05/07 20:45:32 8CEBB98 r V23 [videoguard2] tier: 00af, expiry date: 2013/06/26-01:00:00
2013/05/07 20:45:32 8CEBB98 r V23 [videoguard2] tier: 00b0, expiry date: 2013/06/26-01:00:00
2013/05/07 20:45:32 8CEBB98 r V23 [videoguard2] tier: 00ba, expiry date: 2013/06/26-01:00:00
2013/05/07 20:45:32 8CEBB98 r V23 [videoguard2] tier: 00f3, expiry date: 2013/06/26-01:00:00
2013/05/07 20:45:33 8CED7D8 r tivusat [mouse] Warning: Card returned error on setting ifsd value to 28
2013/05/07 20:45:34 8CED7D8 r tivusat [mouse] card system not supported
2013/05/07 20:45:34 8CED7D8 r tivusat [mouse] Normal mode failed, reverting to Deprecated Mode
2013/05/07 20:45:35 8CED7D8 r tivusat [mouse] ATR: 3F FF 95 00 FF 91 81 71 FF 47 00 54 49 47 45
2013/05/07 20:45:35 8CED7D8 r tivusat [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/05/07 20:45:35 8CED7D8 r tivusat [mouse] Calculated work ETU is 104.20 us
2013/05/07 20:45:35 8CED7D8 r tivusat [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
2013/05/07 20:45:37 8CED7D8 r tivusat [mouse] Warning: Card returned error on setting ifsd value to 28
2013/05/07 20:45:38 8CED7D8 r tivusat [mouse] card system not supported
2013/05/07 20:45:38 8CED7D8 r tivusat [mouse] card initializing error

Bitte evtl. auch dazuschreiben wie die Jumper beim EASYMOUSE2 stehen.

Grüsse

 

[bofh]

AW: Oscam Tivusat Easymouse2

Hallo giovane,

hast du mittlerweile dein Problem gelöst? Hab nämlich gerade genau das selbe Problem!

Gruß

 

[Lui2004]

AW: Oscam Tivusat Easymouse2

hi

wie sieht deine Reader einstellung aus ?
und wie sind die jumper an der easymouse2 eingestellt ?

bitte mal posten