Oscam Server einrichten

[MKLST2]

hallo,

ich würde gerne meine HD01-Karte mit jemandem teilen. Ich habe dazu versucht Oscam einzurichten, das Bild bleibt jedoch dunkel.

Die HD01 befindet sich im oberen Kartenslot.

Falls jemand mal einen Blick werfen möchte, hier die Configs:

oscam.config

Spoiler

[global]
netprio=1
logfile = /tmp/oscam.log
maxlogsize = 2000
cachedelay = 120
nice = -1
preferlocalcards = 1
dropdups=1

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = local

[cccam]
port = 12000
reshare = 1
version = 2.3.0
keepconnected = 1
stealth = 1
[monitor]
appendchaninfo=1
[webif]
httpport = 2002
httphelplang = de
httpuser = ccccc
httppwd = xxxxxx
httpallowed = 0.0.0.0-255.255.255.255

oscam.server

Spoiler

[reader]
label = HD01
enable = 1
protocol = mouse
device = /dev/sci0
detect = CD
group = 1
rsakey = BF35xxxxxxxxxxxxxD5
boxkey = A7xxxxxxx7C
CAID = 1830
ident = 1830:000000,003411,008011
mhz = 368
cardmhz = 368
emmcache = 1,3,2
lb_weight = 300
ecmwhitelist = 1830:92

oscam.services

Spoiler

[HDPlus]
caid = 1830
srvid = 1EF10,EF11,EF14,1581,EF15,EF74,EF75,EF76,EF77,5273, 5274,1519,277E,2E9B,151A,157F,EF78,157C,2774,2EAF, 2777

oscam.user

Spoiler

[account]
user = local
enable = 1
group = 1,2
au = 1
caid = 1830
services = HDplus
uniq = 3

[account]
user = xxx
pwd = xxx12
group = 1,2
caid = 1830
services = HDplus
uniq = 3
cccmaxhops = 0
cccreshare = 0

Welche Attribute/Rechte muss welche Datei haben? Wie füge ich eine Client-Line ein?

 

[webman2]

AW: Oscam Server einrichten

Du hast doch CCcam gar nicht aktiviert in der oscam.conf !

Spoiler

[cccam]
port = PORT
nodeid = NODEID
version = 2.3.0

 

[czutok]

AW: Oscam Server einrichten

protocol = mouse auf internal umschreiben
cardmhz = 368 auf 2700 umschreiben

dann oscam neustarten und schauen was pasiert

 

[MKLST2]

AW: Oscam Server einrichten

oscam.conf

Spoiler

[global]
netprio=1
logfile = /tmp/oscam.log
maxlogsize = 2000
cachedelay = 120
nice = -1
preferlocalcards = 1
dropdups=1

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = local

[cccam]
port = 12000
nodeid = NODEID
version = 2.3.0
reshare = 1
keepconnected = 1
stealth = 1
[monitor]
appendchaninfo=1
[webif]
httpport = 2002
httphelplang = de
httpuser = xxx
httppwd = cccc
httpallowed = 0.0.0.0-255.255.255.255

oscam.Server

Spoiler

[reader]
label = HD01
enable = 1
protocol = internal
device = /dev/sci0
detect = CD
group = 1
rsakey = BF35xxxxxxxxxxxxxxxD5
boxkey = A7xxxxxxx7C
CAID = 1830
ident = 1830:000000,003411,008011
mhz = 368
cardmhz = 2700
emmcache = 1,3,2
lb_weight = 300
ecmwhitelist = 1830:92

keine Änderung, bleibt dunkel, auch intern

 

[d2z]

AW: Oscam Server einrichten

rsakey = BF35xxxxxxxxxxxxxxxD5
boxkey = A7xxxxxxx7C

Die xxxxxx hast Du doch hoffentlich nicht in der Config stehen, sondern die kompletten Keys.

 

[webman2]

AW: Oscam Server einrichten

nodeid = NODEID ist ein Platzhalter, wird von OSCAM befüllt.

 

[MKLST2]

AW: Oscam Server einrichten

nein, hatte xxx statt des Keys eingefügt

@webman2: was soll das für mich bedeuten?

 

[czutok]

AW: Oscam Server einrichten

du brauchst schon den ganzen boxkey und rsa , ohne den xxx

nodeid = NODEID

das rote löschen , wird automatisch von oscam eingetragen !!!

 

[webman2]

AW: Oscam Server einrichten

So schreiben - ohne Inhalt.

nodeid =

 

[MKLST2]

AW: Oscam Server einrichten

habe ich ja drin, ich dachte ich sololte den key hier nicht komplett posten, soll ich?

 

[czutok]

AW: Oscam Server einrichten

der HD+ key ist schon überall bekant , somit ist es egal ob du den postest oder nicht , hauptsache du hast im komplet drine , ohne xxxxx

wie schaut es bei oscam user ??

 

[MKLST2]

AW: Oscam Server einrichten

ich muss jetzt mal Fussball gucken, Czutok hat ne PM von mir, im OScam- Log steht was von falschem RSA-Key, mache später weiter

 

[czutok]

AW: Oscam Server einrichten

czutok vergibt keine rsa und boxkeys , aber deine sind 100% falsch , tausche sie auf die was ich dir geschikt habe , dann solte die karte laufen

den oscam user hast du auch nicht gepostet

 

[MKLST2]

AW: Oscam Server einrichten

hallo czutok,

ich habe rsa und boxkey getauscht, jedoch ist im logfile der gleiche Fehler gelistet.

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Jun 6 23:52:41 2015
-------------------------------------------------------------------------------
2015/06/06 23:52:41 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r10663 (mipsel-unknown-linux-gnu-ssl-libusb-pcsc)
2015/06/06 23:52:41 0 s (main) System name = Linux
2015/06/06 23:52:41 0 s (main) Host name = dm800se
2015/06/06 23:52:41 0 s (main) Release = 3.2-dm800se
2015/06/06 23:52:41 0 s (main) Version = #1 SMP Thu Jul 10 12:49:12 CEST 2014
2015/06/06 23:52:41 0 s (main) Machine = mips
2015/06/06 23:52:41 0 s (main) Stb model = dm800se
2015/06/06 23:52:41 0 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 574
2015/06/06 23:52:41 0 s (config) services reloaded: 0 services freed, 1 services loaded, rejected 0
2015/06/06 23:52:41 0 s (config) userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2015/06/06 23:52:41 0 s (main) signal handling initialized
2015/06/06 23:52:41 0 s (config) 21 service-id's loaded in 1 ms
2015/06/06 23:52:41 0 s (net) cccam: initialized (fd=5, port=12000, prio=1)
2015/06/06 23:52:41 0 s (reader) HD01 [internal] creating thread for device /dev/sci0
2015/06/06 23:52:41 0 s (stat) loadbalancer: file /tmp/.oscam/stat not found
2015/06/06 23:52:41 0 s (main) waiting for local card init
2015/06/06 23:52:41 74EEA0 r (reader) HD01 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=3.68 MHz)
2015/06/06 23:52:41 74EEA0 r (reader) HD01 [internal] Reader sci internal, detected box type: dm800se
2015/06/06 23:52:41 74EEA0 r (reader) HD01 [internal] card detected
2015/06/06 23:52:41 74F8D0 h (webif) webif: decompressed 160180 bytes back into 384088 bytes
2015/06/06 23:52:41 74F8D0 h (webif) HTTP Server running. ip=0.0.0.0 port=2002
2015/06/06 23:52:43 74EEA0 r (reader) HD01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2015/06/06 23:52:43 74EEA0 r (reader) HD01 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/06/06 23:52:43 74EEA0 r (reader) HD01 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2015/06/06 23:52:43 74EEA0 r (reader) HD01 [internal] Buffers readed 0 bytes total time_us 75184
2015/06/06 23:52:43 74EEA0 r (reader) HD01 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->mhz)
2015/06/06 23:52:43 74EEA0 r (reader) HD01 [internal] Card responded ok for ifsd request of 251
2015/06/06 23:52:44 74EEA0 r (reader) HD01 [internal] detect native nagra card
2015/06/06 23:52:45 74EEA0 r (reader) HD01 [internal] Negotiate sessionkey was not successful! Please check rsa key and boxkey
2015/06/06 23:52:45 74EEA0 r (reader) HD01 [internal] card system not supported
2015/06/06 23:52:45 74EEA0 r (reader) HD01 [internal] Normal mode failed, reverting to Deprecated Mode
2015/06/06 23:52:47 74EEA0 r (reader) HD01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2015/06/06 23:52:47 74EEA0 r (reader) HD01 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/06/06 23:52:47 74EEA0 r (reader) HD01 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2015/06/06 23:52:47 74EEA0 r (reader) HD01 [internal] Buffers readed 0 bytes total time_us 75178
2015/06/06 23:52:47 74EEA0 r (reader) HD01 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/06/06 23:52:49 74EEA0 r (reader) HD01 [internal] Warning: Card returned error on setting ifsd value to 251
2015/06/06 23:52:50 74EEA0 r (reader) HD01 [internal] detect native nagra card
2015/06/06 23:52:51 74EEA0 r (reader) HD01 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2015/06/06 23:52:52 74EEA0 r (reader) HD01 [internal] T1 Resync command error, trying to reactivate!
2015/06/06 23:52:54 74EEA0 r (reader) HD01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2015/06/06 23:52:54 74EEA0 r (reader) HD01 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/06/06 23:52:54 74EEA0 r (reader) HD01 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2015/06/06 23:52:54 74EEA0 r (reader) HD01 [internal] Buffers readed 0 bytes total time_us 75324
2015/06/06 23:52:55 74EEA0 r (reader) HD01 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->mhz)
2015/06/06 23:52:55 74EEA0 r (reader) HD01 [internal] Card responded ok for ifsd request of 251
2015/06/06 23:52:55 74EEA0 r (reader) HD01 [internal] Negotiate sessionkey was not successful! Please check rsa key and boxkey
2015/06/06 23:52:55 74EEA0 r (reader) HD01 [internal] card system not supported
2015/06/06 23:52:55 74EEA0 r (reader) HD01 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/06/06 23:52:55 74EEA0 r (reader) HD01 [internal] card initializing error
2015/06/06 23:52:56 0 s (main) init for all local cards done
2015/06/06 23:52:56 0 s (anticasc) anti cascading disabled
2015/06/06 23:52:56 7557D8 c (client) plain dvbapi-client granted (local, au=auto (1 reader))
2015/06/06 23:52:56 7557D8 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2015/06/06 23:53:34 7557D8 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 1830 ECM_PID: 1CCC PROVID: 000000
2015/06/06 23:53:34 7557D8 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 1843 ECM_PID: 19CC PROVID: 000000
2015/06/06 23:53:34 7557D8 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 1860 ECM_PID: 1ECC PROVID: 000000
2015/06/06 23:53:34 7557D8 c (dvbapi) Demuxer 0 ecmpid 3 CAID: 098C ECM_PID: 1ACC PROVID: 000000
2015/06/06 23:53:34 7557D8 c (dvbapi) Demuxer 0 ecmpid 4 CAID: 09C4 ECM_PID: 1BCC PROVID: 000000
2015/06/06 23:53:34 7557D8 c (dvbapi) Demuxer 0 ecmpid 5 CAID: 186A ECM_PID: 1FCC PROVID: 000000
2015/06/06 23:53:34 7557D8 c (dvbapi) Demuxer 0 found 6 ECMpids and 7 STREAMpids in PMT
2015/06/06 23:53:34 7557D8 c (dvbapi) Demuxer 0 serving srvid EF10 (RTL HD) on adapter 0000 camask 0008 index 0003 pmtpid 0060
2015/06/06 23:53:34 7557D8 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2015/06/06 23:53:36 7557D8 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

Die oscam.user hatte ich in post1 angehängt, hier nochmals:

Spoiler

[account]
user = local
enable = 1
group = 1,2
au = 1
caid = 1830
services = HDplus
uniq = 3

[account]
user = rrrrrrr
pwd = tttttttt
group = 1,2
caid = 1830
services = HDplus
uniq = 3
cccmaxhops = 0
cccreshare = 0

Was mich stutzig macht ist die Leerzeichen im RSA-Key, ist es trotzdem so richtig?

rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A 23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156 F9EB64E8168EF09E4D9C5CCA4DD5





edit: Leerzeichen weg und es läuft

Vielen Dank!


Nur noch 1 Frage: Wie füge ich eine C-Line zu einem anderen Server ein?

 

[Radagast]

AW: Oscam Server einrichten

Hi,

mal diese Anleitung https://www.digital-eliteboard.com/162498-proxy-oscam-server-einbinden.html durchgelesen?
Es gibt noch eine weitere, aber die finde ich gerade auf die Schnelle nicht. Einfach auch mal die SuFu (Suchfunktion) des Boards verwenden.