Dies ist eine mobil optimierte Seite, die schnell lädt. Wenn Sie die Seite ohne Optimierung laden möchten, dann klicken Sie auf diesen Text.

gelöst Oscam Samsung H [solved]

    Nobody is reading this thread right now.
F

Fdm1988

Newbie
Registriert
3. September 2018
Beiträge
12
Reaktionspunkte
1
Punkte
23
Hello my friends. I have a problem with Oscam in my Samsung h series. Oscam works but lbvalue/reader no data. Can you help me please? Thank you

Log
  • 2020/04/06 20:40:10 1F0CB758 c (dvbapi) PMT mode 6: Connecting to enigma CA PMT listen socket...
  • 2020/04/06 20:40:10 1F0CB758 c (dvbapi) socket connect error (errno=2 No such file or directory)
 
Zuletzt bearbeitet von einem Moderator:
I think your OScam Version is wrong

Oscam PMT6: Trying connect to enigma CA PMT listen socket Error

Hallo! Ich habe meinen Samsung MST-E Version erfolgreich gerootet und Oscam läuft soweit. Jedoch bekomme ich immer den Fehler: 2016/05/29 22:32:47 74675DE1 c (dvbapi) PMT6: Trying connect to enigma CA PMT listen socket... 2016/05/29 22:32:47 74675DE1 c (dvbapi) socket connect error...
www.digital-eliteboard.com
 
Can you tell me which version should I use? I have UE55H6500 with t-mst firmware


Inviato dal mio iPhone utilizzando Tapatalk
 
It's difficult but check this two

OScam Samygo - oscam-svn11577-samsungtv-webif-dvbapi-upx

OSCam ver: 1.20_svn rev: 11577 target: arm-v7a8v3r1-linux-gnueabi | Tools: | CROSS = /opt/s3/support/toolchains/samsungtv/bin/arm-v7a8v3r1-linux-gnueabi- | CC = /opt/s3/support/toolchains/samsungtv/bin/arm-v7a8v3r1-linux-gnueabi-gcc |...
www.digital-eliteboard.com

OScam Samygo - oscam-svn11577-armv7l_tizen-webif-dvbapi-upx

Should work with J, K, M and Q Series of Samsung TV +------------------------------------------------------------------------------- | OSCam ver: 1.20_svn rev: 11577 target: armv7l-tizen-linux-gnueabi | Tools: | CROSS =...
www.digital-eliteboard.com
 
From my point of view its more an issue with the dvbapi lib than with the oscam.
Which liboscam are you using?
 
And now please show your oscam config
 
oscam.conf
# oscam.conf generated automatically by Streamboard OSCAM 1.20_svn SVN r11438
# Read more:
Sie müssen registriert sein, um Links zu sehen.


[global]
logfile = /dtv/oscam.log
pidfile = /dtv/oscam.pid
netprio = 18
nice = -1
maxlogsize = 50

[cache]

[dvbapi]
enabled = 1
au = 1
pmt_mode = 6
user = dvbapi
boxtype = samygo

[webif]
httpport = 8888
httphelplang = de
httphideidleclients = 0
httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255
httposcamlabel = SamsungTV


Inviato dal mio iPhone utilizzando Tapatalk
 
Zuletzt bearbeitet von einem Moderator:
You need to change to config like this

[dvbapi]
enabled = 1
au = 1
pmt_mode = 6
delayer = 60
user = dvbapi
boxtype = pc-nodmx

Just change the red parameter
 
I have already tried and it doesn't work.


Inviato dal mio iPhone utilizzando Tapatalk
 
Change it to the value and restart oscam and show me the log from the beginning not only 2 lines
 
2020/04/07 11:44:06 00000000 s (main) System name = Linux
2020/04/07 11:44:06 00000000 s (main) Host name = (none)
2020/04/07 11:44:06 00000000 s (main) Release = 3.8.13
2020/04/07 11:44:06 00000000 s (main) Version = #1 SMP PREEMPT Wed Oct 1 19:25:34 KST 2014
2020/04/07 11:44:06 00000000 s (main) Machine = armv7l
2020/04/07 11:44:06 00000000 s (main) creating pidfile /dtv/oscam.pid with pid 1919
2020/04/07 11:44:06 00000000 s (emu) OSCam-Emu version 798
2020/04/07 11:44:06 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2020/04/07 11:44:06 00000000 s (main) signal handling initialized
2020/04/07 11:44:06 00000000 s (reader) s1.cccambird.com [cccam] creating thread for device s1.cccambird.com
2020/04/07 11:44:06 00000000 s (reader) emulator [emu] creating thread for device emulator
2020/04/07 11:44:06 00000000 s (main) waiting for local card init
2020/04/07 11:44:06 4982B5BD r (emu) Stream key delayer initialized
2020/04/07 11:44:06 4982B5BD r (emu) Stream relay server initialized
2020/04/07 11:44:06 4982B5BD r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2020/04/07 11:44:06 00000000 (emu) INFO: FFDecsa parallel mode = 32
2020/04/07 11:44:06 7B0CA4B9 p (reader) s1.cccambird.com: resolved ip=207.180.207.254
2020/04/07 11:44:06 7B0CA4B9 p (reader) s1.cccambird.com [cccam] connecting to s1.cccambird.com:13300
2020/04/07 11:44:06 4855A2B4 h (webif) webif: decompressed 177058 bytes back into 433080 bytes
2020/04/07 11:44:06 4855A2B4 h (webif) HTTP Server running. ip=0.0.0.0 port=8888
2020/04/07 11:44:06 7B0CA4B9 p (reader) s1.cccambird.com [cccam] proxy initialized, server s1.cccambird.com:13300
2020/04/07 11:44:07 4982B5BD r (reader) emulator [emu] card detected
2020/04/07 11:44:08 4982B5BD r (reader) emulator [emu] found card system emu
2020/04/07 11:44:08 4982B5BD r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1
2020/04/07 11:44:08 4982B5BD r (emu) Key file not found in: /mnt/opt/privateer/usr/bin/oscam
2020/04/07 11:44:08 4982B5BD r (emu) Cannot open key file path: /var/keys
2020/04/07 11:44:08 4982B5BD r (emu) Total keys in memory: W:0 V:0 N:0 I:0 F:0 G:0 P:0 T:0 A:0
2020/04/07 11:44:09 00000000 s (main) init for all local cards done
2020/04/07 11:44:09 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
2020/04/07 11:44:09 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
2020/04/07 11:44:09 51F5604A c (client) plain dvbapi-client granted (dvbapi, au=auto (2 reader))
2020/04/07 11:44:09 51F5604A c (dvbapi) dvbapi channelcache loaded from /mnt/opt/privateer/usr/bin/oscam/oscam.ccache
2020/04/07 11:44:09 51F5604A c (dvbapi) Using SamyGO dvbapi v0.1
2020/04/07 11:44:09 51F5604A c (dvbapi) ERROR: Can't open device /tmp/virtual_adapter/ca0 (errno=2 No such file or directory)
2020/04/07 11:44:09 51F5604A c (dvbapi) PMT mode 6: Connecting to enigma CA PMT listen socket...
2020/04/07 11:44:09 51F5604A c (dvbapi) socket connect error (errno=2 No such file or directory)
2020/04/07 11:44:10 51F5604A c (dvbapi) PMT mode 6: Connecting to enigma CA PMT listen socket...
2020/04/07 11:44:10 51F5604A c (dvbapi) socket connect error (errno=2 No such file or directory)
2020/04/07 11:44:11 51F5604A c (dvbapi) PMT mode 6: Connecting to enigma CA PMT listen socket...
2020/04/07 11:44:11 51F5604A c (dvbapi) socket connect error (errno=2 No such file or directory)
2020/04/07 11:44:12 51F5604A c (dvbapi) PMT mode 6: Connecting to enigma CA PMT listen socket...

Inviato dal mio iPhone utilizzando Tapatalk
 
Zuletzt bearbeitet von einem Moderator:
Please delete the pulic IP and host from your log.. @Fdm1988

You don't get support for payserver! Contact the person, who you paid.
 
The libOscamH_T-MST_build140.so is not loaded and thats why its not working.
I think you might have an additional dvbapi lib in the TV but without knowing what you have installed and how its almost impossible to know.

How does you start script (that is located in the /init.d folder of the TV) look like?
 
Du musst angemeldet sein, um Bilder zu sehen.


Inviato dal mio iPhone utilizzando Tapatalk
 
Zuletzt bearbeitet von einem Moderator:
Du musst dich einloggen oder registrieren, um hier zu antworten.

Ähnliche Themen

H
Keine Empfang von EMMs mit ORF Karte (K2XXXXXXXXXXXXX)
2
Antworten
18
Aufrufe
1K
Kind regards
T
gelöst ATV,ATV2 und ServusTV werden nach ca.10 min finster
2
Antworten
24
Aufrufe
992
turbo16v
T
R
gelöst Hilfe bei der Konfiguration von OScam für ORF Karten
2
Antworten
16
Aufrufe
1K
ghost0815
S
gelöst Anfängerhilfe
2
Antworten
17
Aufrufe
924
nyland
M
gelöst unerwartet keine Entschlüsselung mehr (hd+, docker, tvheadend)
Antworten
2
Aufrufe
415
magic3arkus
M
Menü
Anmelden
Registrieren
Für die Nutzung dieser Website sind Cookies erforderlich. Du musst diese akzeptieren, um die Website weiter nutzen zu können. Erfahre mehr…