OScam - Newcamd HD02 nach 6 Wochen dunkel

Namerp · 21. März 2014

AW: OScam - Newcamd HD02 nach 6 Wochen dunkel

ich probiere es mal, mal gucken

Namerp · 22. März 2014

AW: OScam - Newcamd HD02 nach 6 Wochen dunkel

Nach der Umstellung auf camd35 (cs357x) habe ich genau das selbe wie bei newcamd. Ich habe "Clients 1/1 (1 with ECM within last 25 seconds)" und nix passiert

Log:

94FF90 r hdplus [nagra] active to: 2014/03/18 11:59
...
94FF90 r hdplus [nagra] |8011|0BEA |2014/01/24 |2015/03/01 |
94FF90 r hdplus [nagra] -----------------------------------------
94FF90 r hdplus [nagra] ready for requests
0 s init for all local cards done
0 s anti cascading disabled
95EED0 c encrypted cs357x-client 192.168.0.222 granted (oepc, au=on (1 reader))
95EED0 c oepc emm-request sent (reader=hdplus, caid=1843, auprovid=003411)
95EED0 c oepc (1843&000000/0000/EF10/89:1640D97CB06C11B60FD9691DD1059CD2): not found (326 ms) by hdplus - RTL HD

Client:

oscam.conf

[dvbapi]
enabled = 1
au = 1
request_mode = 1
user = oepc
boxtype = pc

oscam.server

[reader]
label = hdplus
description = hdplus
protocol = cs357x
device = 192.168.0.88,31000
user = oepc
password = oepc
reconnecttimeout = 60
keepalive = 1
caid = 1843
group = 1
cccreshare = 1
ccchop = 5

oscam.dvbapi

P:1843 1

oscam.user

[account]
user = oepc
au = hdplus
group = 1

Server:

oscam.conf

[cs357x]
port = 31000
serverip = 192.168.0.88

oscam.server

[reader]
label = hdplus
description = hdreader
protocol = mouse
device = /dev/ttyUSB0
boxkey = A...C
rsakey = B...5
detect = cd
mhz = 368
cardmhz = 368
group = 1

oscam.user

[account]
user = oepc
pwd = oepc
au = hdplus
group = 1

DreamHD · 22. März 2014

AW: OScam - Newcamd HD02 nach 6 Wochen dunkel

Extra für dich getestet

Habe die Verbindung zwischen Client und Server auf protocol = cs357x geändert. Resultat.... kein AU. AU Status bleibt auf On. Keine EMMS werden geschrieben.
Wieder zurück auf protocol = cs378x. Nach 30s nach dem Start wechselt der Status auf Activ... und EMM werden am Reader geschrieben.

Also versuche mal wie vorgeschlagen das Protocol = cs378x

Eenn bei dir dann die ersten EMM´s reinkommen sollte die Karte in 30min eigentlich wieder hell sein.

Grüße

brain666 · 22. März 2014

AW: OScam - Newcamd HD02 nach 6 Wochen dunkel

ich würde noch am server für die hd02 einstellen

Code:

emmcache                      = 1,1,2

Namerp · 22. März 2014

AW: OScam - Newcamd HD02 nach 6 Wochen dunkel

Hupps das hatte ich falsch mir gemerkt mir dem cs378 ^^ geholfen hat es aber nichts wenn ich mir die logs so anschaue (komplett neustart gemacht)
Log:
Au steht auf ON sonst das selbe wie immer :/

799B80 r hdplus [nagra] |8011|0BEA |2014/01/24 |2015/03/01 |
799B80 r hdplus [nagra] -----------------------------------------
799B80 r hdplus [nagra] ready for requests
0 s init for all local cards done
0 s anti cascading disabled
7A2D00 c encrypted cs378x-client 192.168.0.222 granted (oepc, au=on (1 reader))
7A2D00 c oepc emm-request sent (reader=hdplus, caid=1843, auprovid=003411)
7A2D00 c oepc (1843&000000/0000/EF10/89:01EB5953B1AB5D0D1B53ACAA5862F836): not found (326 ms) by hdplus - RTL HD

Client:
oscam.server:

[reader]
label = hdplus
description = hdplus
protocol = cs378x
device = 192.168.0.88,31000
user = oepc
password = oepc
inactivitytimeout = -1
reconnecttimeout = 60
keepalive = 1
caid = 1843
group = 1
cccreshare = 1
ccchop = 5

Server:
oscam.conf

[cs378x]
port = 31000
serverip = 192.168.0.88

conf sollten ja richtig sein, ob da DVBApi irgendwie dazwischen funkt ?

DreamHD · 22. März 2014

AW: OScam - Newcamd HD02 nach 6 Wochen dunkel

Sorry das wars doch nicht. Steht in meiner Confs auch mit au = 1 drin.
Wenn du jetzt auf den Reader gehst werden dann gar keine EMM geschrieben?

Namerp · 22. März 2014

AW: OScam - Newcamd HD02 nach 6 Wochen dunkel

Client:

Du musst angemeldet sein, um Bilder zu sehen.

Server:

Du musst angemeldet sein, um Bilder zu sehen.

:JC_shipwrecked:

DreamHD · 22. März 2014

AW: OScam - Newcamd HD02 nach 6 Wochen dunkel

Hier mal meine Config (user / reader):

Client:

[reader]
label = CardServer
description =
enable = 1
protocol = cs378x
device = 192.168.1.1,15000,0
key =
user = 7020HD
password = 123456
pincode = none
gbox_max_distance = 2
gbox_max_ecm_send = 3
gbox_reshare = 0
services = !keyserver
lb_whitelist_services =
inactivitytimeout = 0
reconnecttimeout = 60
reconnectdelay = 60000
keepalive = 1
fallback = 0
fallback_percaid =
cacheex = 0
cacheex_maxhop = 0
cacheex_ecm_filter =
cacheex_allow_request = 0
cacheex_drop_csp = 0
caid = 1843
ecmnotfoundlimit = 0
ecmwhitelist =
ecmheaderwhitelist =
ident =
chid =
class =
aeskeys =
group = 1
emmcache = 0,0,0
blockemm-unknown = 0
blockemm-u = 0
blockemm-s = 0
blockemm-g = 0
saveemm-unknown = 0
saveemm-u = 0
saveemm-s = 0
saveemm-g = 0
blockemm-bylen =
lb_weight = 100
savenano =
blocknano =
dropbadcws = 0
disablecrccws = 0
use_gpio = 0
cccreshare = -1
ccchop = 0
use_ssl = 0
audisabled = 0
auprovid =
ratelimitecm = 0
ratelimittime = 0
ecmunique = 0
srvidholdtime = 0
cooldown = 0,0

Server:

[account]
user = 7020HD
pwd = 123456
keepalive = 1
au = HDplus
betatunnel =
group = 1,2
cccreshare = 10
cccignorereshare = 1
cccstealth = 1

Wenns mit den beiden dann auch nicht klappt poste ich mal die gesamte Config.

Namerp · 22. März 2014

AW: OScam - Newcamd HD02 nach 6 Wochen dunkel

will nicht, wer weiß dann hängt das am ende an irgend einer kleinen mistigkeit

pehedima · 22. März 2014

AW: OScam - Newcamd HD02 nach 6 Wochen dunkel

Du solltest mal einen entsprechenden Reader am Client einrichten und die Karte mal direkt am Client betreiben.
Wenn da dann keine EMMs geschrieben werden, liegt es am Client selbst!

Einfach mal testen.

Namerp · 23. März 2014

AW: OScam - Newcamd HD02 nach 6 Wochen dunkel

Das wollte ich erstmal vermeiden, weil ich dann ja noch immer keine Lösung habe. Wenn gar nix geht probiere ich das nochmal. (erstmal DreamHD konfig probieren, falls er sie noch postet

).

DreamHD · 23. März 2014

AW: OScam - Newcamd HD02 nach 6 Wochen dunkel

Also wäre meine Config.
Gelöscht habe ich nur die Passwörter, RSA und Boxkey bzw. die Services.

Server conf:

[global]
logfile = /tmp/oscam.log
pidfile = /var/run/oscam.pid
usrfileflag = 1
nice = -1
maxlogsize = 500
block_same_ip = 0
block_same_name = 0
usrfile = /tmp/oscamuser.log
emmlogdir = /tmp/
ecmfmt = c

:s/l
failbantime = 10

[cache]
delay = 80

[cs378x]
port = 15000
serverip = 192.168.1.1

[cccam]
port = 34500
serverip = 192.168.1.1
nodeid = A0E0F1A310A81600
version = 2.3.0
reshare = -1
reshare_mode = 1
ignorereshare = 1

[webif]
httpport = 8888
httpuser = root
httppwd = 123456
httprefresh = 10
httpallowed = 1.1.1.1-255.255.255.255

Server User:

[account]
user = 7020HD
pwd = abcdefg
keepalive = 1
au = HDplus,Sky
betatunnel = 1833.FFFF:1702
group = 1,2
cccreshare = 10
cccignorereshare = 1
cccstealth = 1

Server Reader

[reader]
label = HDplus
description = HDplus
protocol = mouse
device = /dev/READER
services =
caid = 1843
boxkey = ZENSIERT
rsakey = ZENSIERT
detect = cd
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
dropbadcws = 1
cccreshare = 0

Client Config:

[global]
disablelog = 0
loghistorysize = 4096
serverip = 0.0.0.0
logfile = /tmp/oscam.log
logduplicatelines = 0
pidfile =
disableuserfile = 1
disablemail = 1
usrfileflag = 0
clienttimeout = 15000
fallbacktimeout = 4900
fallbacktimeout_percaid =
clientmaxidle = 60
bindwait = 20
netprio = 0
sleep = 0
unlockparental = 1
nice = -1
maxlogsize = 1000
waitforcards = 1
waitforcards_extra_delay = 500
preferlocalcards = 0
readerrestartseconds = 5
dropdups = 0
block_same_ip = 0
block_same_name = 0
usrfile =
mailfile =
cwlogdir =
emmlogdir =
lb_mode = 0
lb_save = 0
lb_nbest_readers = 1
lb_nfb_readers = 1
lb_min_ecmcount = 5
lb_max_ecmcount = 500
lb_reopen_seconds = 30
lb_retrylimit = 0
lb_stat_cleanup = 336
lb_max_readers = 0
lb_auto_betatunnel = 1
lb_auto_betatunnel_mode = 0
lb_auto_betatunnel_prefer_beta= 50
lb_savepath =
lb_retrylimits =
lb_nbest_percaid =
lb_noproviderforcaid =
lb_auto_timeout = 0
lb_auto_timeout_p = 30
lb_auto_timeout_t = 300
double_check_caid =
ecmfmt = c

:s/l
resolvegethostbyname = 0
failbantime = 0
failbancount = 0
suppresscmd08 = 0
double_check = 0

[cache]
delay = 0
max_time = 18
max_hit_time = 15
wait_time =
cacheexenablestats = 0
csp_port = 0
csp_serverip = 0.0.0.0
csp_ecm_filter =
csp_allow_request = 1
csp_allow_reforward = 0
cacheex_cw_check =
wait_until_ctimeout = 0
cwcycle_check_enable = 0
cwcycle_check_caid =
cwcycle_maxlist = 500
cwcycle_keeptime = 0
cwcycle_onbad = 0
cwcycle_dropold = 0
cwcycle_sensitive = 0
cwcycle_allowbadfromffb = 0
cwcycle_usecwcfromce = 0

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
request_mode = 0
delayer = 0
user = Dreambox
boxtype = dreambox

[webif]
httpport = 8887
serverip = 0.0.0.0
httpuser = root
httppwd = 0987
httpcss =
httpjscript =
httpscript =
httptpl =
httphelplang = de
httpcert =
http_prepend_embedded_css = 1
httprefresh = 10
httphideidleclients = 0
httphidetype =
httpshowpicons = 0
httppiconsize = 13
httpshowmeminfo = 0
httpshowuserinfo = 1
httpshowcacheexinfo = 0
httpshowecminfo = 0
httpshowloadinfo = 1
httpallowed = 127.0.0.1,0.0.0.0-255.255.255.255
httpreadonly = 0
httpsavefullcfg = 1
httpforcesslv3 = 0
httpdyndns =
aulow = 30
hideclient_to = 25
httposcamlabel = OscamDreambox

Client User

[account]
disabled = 0
user = Dreambox
pwd =
description =
hostname =
caid =
uniq = 0
sleepsend = 0
failban = 0
monlevel = 0
sleep = 0
suppresscmd08 = 0
umaxidle = 0
keepalive = 1
au = CardServer
emmreassembly = 2
expdate =
allowedprotocols =
allowedtimeframe =
betatunnel = 1833.FFFF:1702
group = 1,2
services =
ident =
chid =
class =
cacheex = 0
cacheex_maxhop = 0
cacheex_ecm_filter =
cacheex_drop_csp = 0
cacheex_allow_request = 0
no_wait_time = 0
cccmaxhops = 10
cccreshare = 10
cccignorereshare = -1
cccstealth = 0
fakedelay = -1
numusers = -1
penalty = -1
lb_nbest_readers = -1
lb_nfb_readers = -1
lb_nbest_percaid =

Client Reader

[reader]
label = CardServer
description =
enable = 1
protocol = cs378x
device = 192.168.1.1,15000,0
key =
user = 7020HD
password = abcdefg
pincode = none
gbox_max_distance = 2
gbox_max_ecm_send = 3
gbox_reshare = 0
services = !keyserver
lb_whitelist_services =
inactivitytimeout = 0
reconnecttimeout = 60
reconnectdelay = 60000
keepalive = 1
fallback = 0
fallback_percaid =
cacheex = 0
cacheex_maxhop = 0
cacheex_ecm_filter =
cacheex_allow_request = 0
cacheex_drop_csp = 0
caid = 1843
ecmnotfoundlimit = 0
ecmwhitelist =
ecmheaderwhitelist =
ident =
chid =
class =
aeskeys =
group = 1
emmcache = 1,1,2
blockemm-unknown = 0
blockemm-u = 0
blockemm-s = 0
blockemm-g = 0
saveemm-unknown = 0
saveemm-u = 0
saveemm-s = 0
saveemm-g = 0
blockemm-bylen =
lb_weight = 100
savenano =
blocknano =
dropbadcws = 0
disablecrccws = 0
use_gpio = 0
cccreshare = -1
ccchop = 0
audisabled = 0
auprovid =
ratelimitecm = 0
ratelimittime = 0
ecmunique = 0
srvidholdtime = 0
cooldown = 0,0

Namerp · 23. März 2014

AW: OScam - Newcamd HD02 nach 6 Wochen dunkel

2339B80 r HDplus [nagra] -----------------------------------------
2339B80 r HDplus [nagra] ready for requests
0 s init for all local cards done
0 s anti cascading disabled
A4001CB0 c encrypted cs378x-client 192.168.0.222 granted (7020HD, au=on (1 reader))
A4001CB0 c 7020HD emm-request sent (reader=HDplus, caid=1843, auprovid=003411)
A4001CB0 c 7020HD (1843&000000/0000/EF10/89:3EB4B35364D5CC5A8EA7E4BC50F53782): not found (320 ms) by HDplus - RTL HD

:JC_shipwrecked:

Also haben wir wohl abgehackt das es an der Config liegt (hab 10min auf RTL HD stehen lassen)

An was könnte es denn nun noch liegen ? hat da jemand eine Idee ? (ich probiere mal den Reader direkt an den Client zu hängen, das wäre aber keine Lösung für mich

)

pehedima · 23. März 2014

AW: OScam - Newcamd HD02 nach 6 Wochen dunkel

Der Test soll nur zeigen, ob dein Client überhaupt in der Lage ist EMMs zu verarbeiten.
Wenn das da schon nicht läuft, sieht es mit der Übertragung an den Server noch schlechter aus!

Namerp · 24. März 2014

AW: OScam - Newcamd HD02 nach 6 Wochen dunkel

So am Client geht es auch nicht (hab es mit DreamHD config probiert, passiert das selbe wie bei einer "frischen" ).

Kartenleser direkt am Client: (Au ist auf On, der Rest wie immer)
alles andere bis auf die Dateien ist leer !

full log

0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9574 (x86_64-openelec-linux-gnu)
0 s creating pidfile /tmp/.oscam/oscam.pid with pid 15580
0 s services reloaded: 0 services freed, 0 services loaded, rejected 0
0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
0 s signal handling initialized
0 s 18 service-id's loaded in 1ms
0 s HDplus [mouse] creating thread for device /dev/ttyUSB1
0 s loadbalancer: can't read from file /tmp/.oscam/stat
0 s waiting for local card init
80008C0 h webif: decompressed 143427 bytes back into 351264 bytes
80008C0 h HTTP Server running. ip=0.0.0.0 port=8888
1150720 r HDplus [mouse] Reader initialized (device=/dev/ttyUSB1, detect=cd, mhz=357, cardmhz=357)
1150720 r HDplus [mouse] card detected
1150720 r HDplus [mouse] ATR: ......
1150720 r HDplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
1150720 r HDplus [mouse] Setting baudrate to 111600 bps
1150720 r HDplus [mouse] Calculated work ETU is 8.96 us reader mhz = 357
1150720 r HDplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
1150720 r HDplus [mouse] Card responded ok for ifsd request of 160
1150720 r HDplus [mouse] detect native nagra card
1150720 r HDplus [mouse] found card system nagra
1150720 r HDplus [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
1150720 r HDplus [nagra] ROM: D N A S P 1 8 0
1150720 r HDplus [nagra] REV: M e r 0 0 0
1150720 r HDplus [nagra] SER: ############
1150720 r HDplus [nagra] CAID: 1843
1150720 r HDplus [nagra] Prv.ID: 00 00 34 11 (sysid)
1150720 r HDplus [nagra] Prv.ID: 00 00 00 00
1150720 r HDplus [nagra] IRD ID: ############
1150720 r HDplus [nagra] active to: 2014/03/18 11:59
1150720 r HDplus [nagra] -----------------------------------------
1150720 r HDplus [nagra] |id |tier |valid from |valid to |
1150720 r HDplus [nagra] +----+--------+------------+------------+
1150720 r HDplus [nagra] |8011|0BEA |2014/01/24 |2015/03/01 |
1150720 r HDplus [nagra] -----------------------------------------
1150720 r HDplus [nagra] ready for requests
0 s init for all local cards done
0 s anti cascading disabled
1156330 c plain dvbapi-client granted (oepc, au=auto (1 reader))
1156330 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 11
1156330 c [DVBAPI] Receiver sends PMT command 3 for channel EF10
1156330 c [DVBAPI] Receiver wants to demux srvid EF10 on adapter 0000 camask 0001 index 0000 pmtpid 0000
1156330 c [ADD PID 0] CAID: 1830 ECM_PID: 1CCC PROVID: 000000
1156330 c [ADD PID 1] CAID: 1843 ECM_PID: 19CC PROVID: 000000
1156330 c [ADD PID 2] CAID: 09C4 ECM_PID: 1BCC PROVID: 000000
1156330 c [ADD PID 3] CAID: 098C ECM_PID: 1ACC PROVID: 000000
1156330 c [ADD PID 4] CAID: 1860 ECM_PID: 1ECC PROVID: 000000
1156330 c Found 5 ECMpids and 2 STREAMpids in PMT
1156330 c [DVBAPI] Receiver wants to demux srvid EF10 on adapter 0000 camask 0001 index 0000 pmtpid 0000
1156330 c New program number: EF10 (RTL HD) [pmt_list_management 3]
1156330 c [DVBAPI] Demuxer #0 trying to descramble PID #1 CAID 1843 PROVID 000000 ECMPID 19CC ANY CHID PMTPID 0000 VPID 00FF
0 >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r9574 (x86_64-openelec-linux-gnu)
1156330 c oepc (1843&000000/0000/EF10/89:1BD0A3EB4E1E04103BFE66815A7DCDF0): not found (322 ms) by HDplus - RTL HD
1156330 c oepc (1843&000000/0000/EF10/89:1BD0A3EB4E1E04103BFE66815A7DCDF0): not found (122 ms) by HDplus - RTL HD
1156330 c oepc (1843&000000/0000/EF10/89:1BD0A3EB4E1E04103BFE66815A7DCDF0): not found (1 ms) by HDplus - RTL HD
1156330 c oepc (1843&000000/0000/EF10/89:1BD0A3EB4E1E04103BFE66815A7DCDF0): not found (0 ms) by HDplus - RTL HD
1156330 c [DVBAPI] Receiver sends PMT command 3 for channel EF10
1156330 c [DVBAPI] Receiver wants to demux srvid EF10 on adapter 0000 camask 0001 index 0000 pmtpid 0000
1156330 c [ADD PID 0] CAID: 1830 ECM_PID: 1CCC PROVID: 000000
1156330 c [ADD PID 1] CAID: 1843 ECM_PID: 19CC PROVID: 000000
1156330 c [ADD PID 2] CAID: 09C4 ECM_PID: 1BCC PROVID: 000000
1156330 c [ADD PID 3] CAID: 098C ECM_PID: 1ACC PROVID: 000000
1156330 c [ADD PID 4] CAID: 1860 ECM_PID: 1ECC PROVID: 000000
1156330 c Found 5 ECMpids and 2 STREAMpids in PMT
1156330 c [DVBAPI] Receiver wants to demux srvid EF10 on adapter 0000 camask 0001 index 0000 pmtpid 0000
1156330 c New program number: EF10 (RTL HD) [pmt_list_management 3]
1156330 c [DVBAPI] Demuxer #0 trying to descramble PID #1 CAID 1843 PROVID 000000 ECMPID 19CC ANY CHID PMTPID 0000 VPID 00FF
...

oscam.conf

[global]
logfile = /storage/.xbmc/userdata/addon_data/service.softcam.oscam/log/oscam.log
nice = -1
usrfile = /storage/.xbmc/userdata/addon_data/service.softcam.oscam/log/oscamuser.log
cwlogdir = /storage/.xbmc/userdata/addon_data/service.softcam.oscam/log/cw
emmlogdir = /storage/.xbmc/userdata/addon_data/service.softcam.oscam/log/oscamemm.log

[cache]

[dvbapi]
enabled = 1
au = 1
pmt_mode = 4
request_mode = 1
user = oepc
boxtype = pc

[webif]
httpport = 8888
httpuser = 123
httppwd = 123
httpallowed = 0.0.0.0-255.255.255.255
aulow = 120
hideclient_to = 15

oscam.dvbapi

P: 1843 1

oscam.reader

[reader]
label = HDplus
description = HDplus
protocol = mouse
device = /dev/ttyUSB1
caid = 1843
boxkey = A...C
rsakey = B...5
detect = cd
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
dropbadcws = 1

oscam.user

[account]
user = oepc
caid = 1843
au = 1
group = 1

hmm warum geht das nicht :/

Suche

Suche

OScam - Newcamd HD02 nach 6 Wochen dunkel

Namerp

Newbie

Namerp

Newbie

DreamHD

Meister

brain666

Newbie

Namerp

Newbie

DreamHD

Meister

Namerp

Newbie

DreamHD

Meister

Namerp

Newbie

pehedima

Namerp

Newbie

DreamHD

Meister

Namerp

Newbie

pehedima

Namerp

Newbie

Ähnliche Themen

Spenden Unterstützung