OSCAM Debian

[julia]

Ich habe OSCAM (6089) auf einem Igel laufen, zum Testen habe ich zwei Karten (ORF und MTV) mit Smargo angeschlossen. Die Karten weren erkannt. CARDOK

Sie müssen registriert sein, um Links zu sehen.

steht bei Status an beiden Reader.
Bekomme aber keine Verbindung zum CCcam.

Hat jemand eine Idee?

Julia


OSCAM log

Spoiler

2012/10/19 5:26:47 B641BB70 c encrypted newcamd:36000-client 127.0.0.1 granted (user1, au=on (1 reader))
2012/10/19 5:26:47 B641BB70 c user user1 authenticated successfully (CCcam)
2012/10/19 5:26:47 B641BB70 c AU enabled for user user1 on reader mtv
2012/10/19 5:27:36 B641BB70 c request_cw() failed on reader mtv errno=0, Success
2012/10/19 5:27:39 B641BB70 c request_cw() failed on reader mtv errno=0, Success
2012/10/19 5:27:41 B641BB70 c user1 (0500&022610/7601/89:95D8): timeout (5008 ms) by mtv (of 1 avail 1)
2012/10/19 5:27:50 B641BB70 c user1 disconnected from 127.0.0.1
2012/10/19 5:27:50 B641BB70 c thread B641BB70 ended!
2012/10/19 5:27:50 B63C6B70 c client connected to 36000 port
2012/10/19 5:27:50 B63C6B70 c encrypted newcamd:36000-client 127.0.0.1 granted (user1, au=on (1 reader))
2012/10/19 5:27:50 B63C6B70 c user user1 authenticated successfully (CCcam)
2012/10/19 5:27:50 B63C6B70 c AU enabled for user user1 on reader mtv
2012/10/19 5:28:11 B63C6B70 c request_cw() failed on reader mtv errno=0, Success
2012/10/19 5:28:11 B63C6B70 c Restarting reader mtv
2012/10/19 5:28:11 B63C6B70 c thread B6C28B70 killed!
2012/10/19 5:28:11 B63C6B70 c restarting reader mtv
2012/10/19 5:28:11 B63C6B70 c creating thread for device /dev/ttyUSB3
2012/10/19 5:28:11 B6C28B70 r reader thread started (thread=B6C28B70, label=mtv, device=/dev/ttyUSB3, detect=cd, mhz=357, cardmhz=357)
2012/10/19 5:28:13 B6C28B70 r mtv card detected
2012/10/19 5:28:16 B63C6B70 c user1 (0500&022610/20B5/64:C043): timeout (5008 ms) by mtv (of 1 avail 1)
2012/10/19 5:28:20 B6C28B70 r ATR: 3F 77 18 00 00 C1 14 00 A2 68 90 00
2012/10/19 5:28:25 B6C28B70 r Warning: D=0 is invalid, forcing D=1
2012/10/19 5:28:26 B63C6B70 c user1 disconnected from 127.0.0.1
2012/10/19 5:28:26 B63C6B70 c thread B63C6B70 ended!
2012/10/19 5:28:26 B641BB70 c client connected to 36000 port
2012/10/19 5:28:26 B641BB70 c encrypted newcamd:36000-client 127.0.0.1 granted (user1, au=on (1 reader))
2012/10/19 5:28:26 B641BB70 c user user1 authenticated successfully (CCcam)
2012/10/19 5:28:26 B641BB70 c AU disabled for user user1
2012/10/19 5:28:27 B6C28B70 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2012/10/19 5:28:34 B641BB70 c user1 (0500&022610/017A/44:2C95): rejected group (1 ms) (of 0 avail 0) (no matching reader)
2012/10/19 5:28:38 B6C28B70 r card system not supported
2012/10/19 5:28:38 B6C28B70 r Normal mode failed, reverting to Deprecated Mode
2012/10/19 5:28:45 B6C28B70 r ATR: 3F 77 18 00 00 C1 14 00 A2 68 90 00
2012/10/19 5:28:45 B6C28B70 r Warning: D=0 is invalid, forcing D=1
2012/10/19 5:28:46 B6C28B70 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2012/10/19 5:28:47 B6C28B70 r [viaccess-reader] using ecm #ca20 for long viaccess ecm
2012/10/19 5:28:47 B6C28B70 r type: Viaccess (standard atr), caid: 0500, serial: *******
2012/10/19 5:28:47 B6C28B70 r providers: 4 (FFF400,007400,022610,032820)
2012/10/19 5:28:47 B6C28B70 r [viaccess-reader] ready for requests
2012/10/19 5:28:47 B6C28B70 r found cardsystem viaccess
2012/10/19 5:28:47 B6C28B70 r [viaccess-reader] card detected
2012/10/19 5:28:47 B6C28B70 r [viaccess-reader] serial: *******
2012/10/19 5:28:47 B6C28B70 r provider: 1, id: FFF400, name: ISSUER, sa: 12345678, geo: FF FF FF FF
2012/10/19 5:28:48 B6C28B70 r provider: 2, id: 007400, name: IDENT, sa: 12345678, geo: FF FF FF FF
2012/10/19 5:28:48 B6C28B70 r provider: 3, id: 022610, name: IDENT, sa: 12345678, geo: FF FF FF FF
2012/10/19 5:28:48 B6C28B70 r provider: 4, id: 032820, name: IDENT, sa: 12345678, geo: FF FF FF FF
2012/10/19 5:28:48 B6C28B70 r Error processing ecm for caid 0500, srvid 20B5 (servicename: 0500:20B5 unknown) on reader mtv.

OSCAM conf

Spoiler

# OSCam Konfiguration IPC - oscam.conf

oscam.conf
[global]
nice = -1
PreferLocalCards = 2
WaitForCards = 1
saveinithistory = 1

logfile = /var/log/ipc/OScam.log
maxlogsize = 2480
cachedelay = 1
loghistorysize = 4096

[newcamd]
key = 0102030405060708091011121314
port = 35000@0D05:000000,000010,000004
port = 36000@0500:22610

oscam Server

Spoiler

# OSCam Konfiguration IPC - oscam.server

[reader]
Label = ORF
Protocol = mouse
device = /dev/ttyUSB2
detect = CD
EMMCache = 1,3,2
group = 1
mhz = 369
cardmhz = 357
CAID = 0D05
ident = 0D05:000000,000010,000004


[reader]
label = MTV
protocol = mouse
device = /dev/ttyUSB3
detect = CD
EMMCache = 1,3,2
group = 2
mhz = 357
cardmhz = 357
caid = 500
ident = 0500:22610

Oscam user

Spoiler

# OSCam Konfiguration IPC - oscam.user

[account]
user = user
pwd = pass
group = 1
au = ORF
CAID = 0D05
ident = 0D05:000000,000010,000004


[account]
user = user1
pwd = pass1
group = 2
au = MTV
CAID = 0500
ident = 0500:22610

mit der N-Line sollen die Karten eingelesen werden:

N: 127.0.0.1 35000 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256 # Fun - AustriaSat
N: 127.0.0.1 36000 user1 pass1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256 # Fun MTV


PS: jetzt geht es, die OSCAM conf war falsch, sollte so heisen:

OSCAM conf

Spoiler

oscam.conf
[global]
nice = -1
PreferLocalCards = 2
WaitForCards = 1
saveinithistory = 1

logfile = /var/log/ipc/OScam.log
maxlogsize = 2480
cachedelay = 1
loghistorysize = 4096

[newcamd]
key = 0102030405060708091011121314
port = 35000@0D05:000010,000004;36000@0500:22610

keepalive = 1

Julia