ORF-Karte wird I read this thread from start to finish as I have a problem with my 0D98 card. Namely,

[Maximmuss66]

EN:
Hi guys, I read this thread from start to finish as I have a problem with my 0D98 card. Namely, I bought a card allegedly activated on ebay from a known buyer, the card worked with 3 tiers and showed the dates 27/05/2023. on all 3 Tiers. The other day it stopped and now I can't get it to start? The card gets EMM-G but uniq doesn't. Could someone help me with activation or registration if someone is from Austria? Thanx
DE:
Hallo Leute, ich habe diesen Thread von Anfang bis Ende gelesen, da ich ein Problem mit meiner 0D98-Karte habe. Ich habe nämlich bei eBay von einem bekannten Käufer eine angeblich freigeschaltete Karte gekauft, die Karte funktionierte mit 3 Stufen und zeigte das Datum 27.05.2023. auf allen 3 Ebenen. Neulich hat es aufgehört und jetzt kann ich es nicht mehr starten? Die Karte erhält EMM-G, Uniq jedoch nicht. Könnte mir jemand bei der Aktivierung bzw. Registrierung helfen, wenn jemand aus Österreich kommt? Danke

Spoiler: config

# oscam.conf generated automatically by Streamboard OSCAM 1.20_svn SVN r11581
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[global]
disablelog = 1
logfile = stdout
syslogport = 0
clientmaxidle = 0
bindwait = 20
nice = -1
maxlogsize = 1000
waitforcards = 0
block_same_ip = 0
block_same_name = 0
emmlogdir = /etc/tuxbox/config/oscam/emm_log
ecmfmt = c:s:l = w
[cs378x]
port = 1000
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
user = dvbapiau
boxtype = dreambox
[webif]
httpport = 12000
httprefresh = 20
httphideidleclients = 0
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
https_force_secure_mode = 0
httpemmsclean = 5

# oscam.server generated automatically by Streamboard OSCAM 1.20_svn SVN r11695
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = Orf.[lo]
protocol = internal
device = /dev/sci0
caid = 0D98
readtiers = 0
detect = cd
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,3,10,0
lb_weight = 300

# oscam.user generated automatically by Streamboard OSCAM 1.20_svn SVN r11695
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[account]
user = dvbapiau
pwd = dvbapiau
keepalive = 1
au = 1
emmreassembly = 1
group = 1,2

 

[telecomic]

Ohne deine configs zu kennen dürfte das nichts werden. Poste doch mal die oscam.server, oscam.conf und oscam.user in einem Spoiler und nicht als nutzlose Textdatei... die jeder erst herunterladen müsste.
Denn für mich sieht es so aus als wenn du die Karte geblockt hast und das müsstest du zuerst mal wieder rückgängig machen damit die Karte überhaupt verlängert wird.

Spoiler: oscam log deines Anhangs..

2023/05/30 14:52:31 00000000 s (main) Host name = dm800se
2023/05/30 14:52:31 00000000 s (main) Release = 3.2-dm800se
2023/05/30 14:52:31 00000000 s (main) Version = #1 SMP Sun Dec 15 11:35:02 CET 2019
2023/05/30 14:52:31 00000000 s (main) Machine = mips
2023/05/30 14:52:31 00000000 s (main) Stb model = dm800se
2023/05/30 14:52:31 00000000 s (main) creating pidfile /tmp/oscam.pid with pid 18970
2023/05/30 14:52:31 00000000 s (config) services reloaded: 0 services freed, 0 services loaded, rejected 0
2023/05/30 14:52:31 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2023/05/30 14:52:31 00000000 s (main) signal handling initialized
2023/05/30 14:52:31 00000000 s (config) 203 provid's loaded
2023/05/30 14:52:31 00000000 s (config) 1177 service-id's loaded in 22 ms
2023/05/30 14:52:31 00000000 s (net) cs378x: initialized (fd=3, port=9378)
2023/05/30 14:52:31 00000000 s (reader) Orf.[lo] [internal] creating thread for device /dev/sci0
2023/05/30 14:52:31 5035E0D2 r (reader) Orf.[lo] [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
2023/05/30 14:52:31 5035E0D2 r (reader) Orf.[lo] [internal] Reader sci internal, detected box type: dm800se
2023/05/30 14:52:31 08A9057C h (webif) webif: decompressed 165686 bytes back into 402472 bytes
2023/05/30 14:52:31 08A9057C h (webif) HTTP Server running. ip=:: port=61003
2023/05/30 14:52:31 00000000 s (emmcache) loaded 854 emmcache records from /etc/tuxbox/config/oscam/oscam.emmcache in 38 ms
2023/05/30 14:52:31 00000000 s (emmcache) loaded 810 emmstat records from /etc/tuxbox/config/oscam/oscam.emmstat in 197 ms
2023/05/30 14:52:31 1AAFC981 c (client) plain dvbapi-client granted (dvbapiau, au=auto (52 reader))
2023/05/30 14:52:31 1AAFC981 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam/oscam.ccache
2023/05/30 14:52:31 1AAFC981 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum number of filters is 64 (oscam limit is 64)
2023/05/30 14:52:31 1AAFC981 c (dvbapi) Detected /dev/dvb/adapter0/ca0 device, total available descramblers: 8
2023/05/30 14:52:32 1AAFC981 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0648 ECM_PID: 0066 PROVID: 000000
2023/05/30 14:52:32 1AAFC981 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 0650 ECM_PID: 0068 PROVID: 000000
2023/05/30 14:52:32 1AAFC981 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 0D95 ECM_PID: 00FC PROVID: 000000
2023/05/30 14:52:32 1AAFC981 c (dvbapi) Demuxer 0 ecmpid 3 CAID: 0D98 ECM_PID: 00FE PROVID: 000000
2023/05/30 14:52:32 1AAFC981 c (dvbapi) Demuxer 0 found 4 ECM pids and 6 STREAM pids in CA PMT
2023/05/30 14:52:32 1AAFC981 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2023/05/30 14:52:32 5035E0D2 r (reader) Orf.[lo] [internal] card detected
2023/05/30 14:52:34 5035E0D2 r (reader) Orf.[lo] [internal] ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00
2023/05/30 14:52:35 5035E0D2 r (reader) Orf.[lo] [internal] card detected
2023/05/30 14:52:35 5035E0D2 r (reader) Orf.[lo] [internal] type: CryptoWorks
2023/05/30 14:52:35 5035E0D2 r (reader) Orf.[lo] [internal] type: CryptoWorks, caid: 0D98, ascii serial: #########, hex serial: ##########
2023/05/30 14:52:36 5035E0D2 r (reader) Orf.[lo] [internal] issuer: CryptoWorks, id: 04, bios: v3, pin: unknown, mfid: 3F00
2023/05/30 14:52:36 5035E0D2 r (reader) Orf.[lo] [internal] providers: 4 (04,08,0C,10)
2023/05/30 14:52:36 5035E0D2 r (reader) Orf.[lo] [internal] Init for global EMM handling CAID 0D98 successful
2023/05/30 14:52:36 5035E0D2 r (reader) Orf.[lo] [internal] found card system cryptoworks
2023/05/30 14:52:36 5035E0D2 r (reader) Orf.[lo] [cryptoworks] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1
2023/05/30 14:52:36 5035E0D2 r (reader) Orf.[lo] [cryptoworks] provider: 1, id: 04, name: Operator: FFFF
2023/05/30 14:52:36 5035E0D2 r (reader) Orf.[lo] [cryptoworks] chid: 0000, date: 1999/12/31 - 2000/01/07, name: DownLoad00000000퀀
2023/05/30 14:52:36 5035E0D2 r (reader) Orf.[lo] [cryptoworks] provider: 2, id: 08, name: Operator: FFFF
2023/05/30 14:52:36 5035E0D2 r (reader) Orf.[lo] [cryptoworks] chid: 0000, date: 1999/12/31 - 2000/01/07, name: DownLoad00000000퀀
2023/05/30 14:52:36 5035E0D2 r (reader) Orf.[lo] [cryptoworks] provider: 3, id: 0C, name: Operator: FFFF
2023/05/30 14:52:36 5035E0D2 r (reader) Orf.[lo] [cryptoworks] chid: 0000, date: 1999/12/31 - 2000/01/07, name: DownLoad00000000퀀
2023/05/30 14:52:36 5035E0D2 r (reader) Orf.[lo] [cryptoworks] provider: 4, id: 10, name: Operator: FFFF
2023/05/30 14:52:36 5035E0D2 r (reader) Orf.[lo] [cryptoworks] chid: 0000, date: 1999/12/31 - 2000/01/07, name: DownLoad00000000퀀
2023/05/30 14:52:36 5035E0D2 r (reader) Orf.[lo] [cryptoworks] ready for requests
2023/05/30 14:52:36 1AAFC981 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2023/05/30 14:53:06 1AAFC981 c (-) -- Skipped 6 duplicated log lines --
2023/05/30 14:53:06 1AAFC981 c (reader) Orf.[lo] [cryptoworks] dvbapiau emmtype=global, len=55 (hex: 0x37), idx=0, cnt=1: blocked & saved (0 ms)
2023/05/30 14:53:11 1AAFC981 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2023/05/30 14:53:13 1AAFC981 c (reader) Orf.[lo] [cryptoworks] dvbapiau emmtype=global, len=87 (hex: 0x57), idx=0, cnt=2: blocked & saved (0 ms)
2023/05/30 14:53:15 1AAFC981 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2023/05/30 14:53:19 1AAFC981 c (reader) Orf.[lo] [cryptoworks] dvbapiau emmtype=global, len=55 (hex: 0x37), idx=0, cnt=3: blocked & saved (0 ms)
2023/05/30 14:53:20 1AAFC981 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2023/05/30 14:53:24 1AAFC981 c (reader) Orf.[lo] [cryptoworks] dvbapiau emmtype=global, len=55 (hex: 0x37), idx=0, cnt=4: blocked & saved (0 ms)
2023/05/30 14:53:25 1AAFC981 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2023/05/30 14:53:30 1AAFC981 c (reader) Orf.[lo] [cryptoworks] dvbapiau emmtype=global, len=55 (hex: 0x37), idx=0, cnt=5: blocked & saved (0 ms)
2023/05/30 14:53:30 1AAFC981 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

 

[Maximmuss66]

Ok, here I edited the post...btw. this message in log Orf.[lo] [cryptoworks] dvbapiau emmtype=global, len=87 (hex: 0x57), idx=0, cnt=2: blocked & saved (0 ms
Ill got because have needsglobalfirst = 1 is oscam.server. Without this emm goes...

Spoiler

Du musst Regestriert sein, um das angehängte Bild zusehen.

 

[telecomic]

First.. is your card activated in the ORF User Center? Here you got Global EMMS and Shared EMMS
After that need ORF Cards only shared EMM`s for extention not global Emms... in Cryptoworks Mode.

Sometimes the card will only accept new EMM`s in Irdeto Mode.. but first you should test your Card in Cryptoworks,. if you have no success you can also switch for card aktivating in Irdeto Mode and then back to Cryptoworks.. wenn your Card ist activ.

emmreassembly = 1

let the default = 2

 

[Maximmuss66]

1.As I wrote, I bought the card on ebay pre-activated until 2028, card was work about less than 30 days then 27.05 stop...
I don't know if the seller activated it and where, I tried register card on this

Sie müssen registriert sein, um Links zu sehen.

but it doesn't work because this error:

Spoiler: error message due registracion

Wichtige Informationen zu Ihrer Online-Anmeldung
Die Gerätenummer ist nicht korrekt. Bitte überprüfen Sie Ihre Angaben und führen Sie den Vorgang erneut aus.

2. Does this mean I have now to disable emm-g then and only allow emm-s in CW Mode?
Thanks for your reply and help...

p.s. if anyone is willing to help with card registration, I would send them my card number via p.m so we can try and see what happens with it?
thank you

 

[telecomic]

The ORF Card is for 30 Days preaktivated... after this you need the activation in the Customer Center of ORF.. this must be done by your Seller... only he can activate the Card!!! because he pay the GIS (broadcasting fee) in Austria for your Card.
If you are not pay GIS in Austria you can`t activate the Card... unless you have your seller's customer access data.

Sie müssen registriert sein, um Links zu sehen.

For acticating your card you should deactivate all blockers in the reader..
when the Card ist activ you can block
blockemm-unknown = 1
blockemm-u = 1
and maybe the globals too... but globals blocking is not neccesary for ORF Cards in Cryptoworks Mode.

If your seller has activated the card, the extension should also come automatically for the next 5 Years to the card after removing the blockers.

 

[Maximmuss66]

So it is possible that I was scammed and that the sender only took money from me and did not give me what I paid for,
since he doesn't respond to my messages anymore?
I paid almost 280€ for the card with postage, ahh...fine if that's the case then I bought the most expensive subscription in
my life...

 

[telecomic]

let the card run in cryptoworks mode for a few hours without a blocker... in parallel you can have a look at the oscam.reader settings for the irdeto mode... and if the card is not activated in cryptoworke mode, try the whole thing in irdeto mode ... then you simply deactivate the Cryptoworks Reader in the oscam.server and activate the Irdeto Reader. I've attached an example for an internal reader.

Spoiler: oscam.server ORF I+CW

[reader]
label = Orf.[lo]
description = ORF_P4_Ird_0650
enable = 0
protocol = internal
device = /dev/sci0
caid = 0650
boxkey = 1122334455667788
rsakey = DF57B08C0F13E67BD17AD37EAAF4EAA25393F8A0EFE8ACE6708AAF97C985CBA8A6C13826963BD3092EB9FC72F773A430724706AA5E1D14E1747842D32069A12D
force_irdeto = 1
needsemmfirst = 1
detect = cd
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,1,2,0

[reader]
label = Orf.[lo]
description = ORF_P4_CW_0D98
enable = 1
protocol = internal
device = /dev/sci0
caid = 0D98
detect = cd
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,1,2,0

now you only must deactivate CW Reader an activate Irdeto Reader. (do not both activate at the same time!!)
Good luck

 

[Maximmuss66]

Ah, it's good..it finally worked and now work in CW mode since it works the same number of channels in Irdeto.
But, how can I notice that I have less 8 channels than before it worked from a card with 3 Tiers (now there are 6)?
These channels are no longer working from card:

Spoiler: Non workin anymore channels

1013:0D98@000004|Bergblick|||ORF-Digital
101D:0D98@000004|AXN Deutchland|||ORF-Digital
10CC:0D98@000004|SPORTDIGITAL FUSSBAL HD|||ORF-Digital
14C1:0D98@000004|SAT.1 emotions|||ORF-Digital
14C2:0D98@000004|kabel eins classics|||ORF-Digital
6FF0:0D98@000004|MTV 00s|||ORF-Digital
6FF1:0D98@000004|MTV 80s|||ORF-Digital
6FF7:0D98@000004|Nick Jr..|||ORF-Digital

 

[DEB ChatGPT]

It seems that the issue you are having with your 0D98 card is related to its activation or registration. Unfortunately, as a bot, I cannot help you with the activation or registration process, but I can suggest some steps that may help you troubleshoot the issue.

Firstly, you can try to restart your OSCam server and check if the issue persists. If it does, you can check if the card is properly inserted in the card reader and if the reader is functioning correctly.

You can also check if the configuration file for OSCam (oscam.conf) is correctly set up for your card. I see that you have already provided your configuration file, and it seems to be correct for your card.

Additionally, you can try to contact the seller from whom you bought the card to see if they can help you with the activation or registration process. Alternatively, you can contact the official support for your card provider to get assistance with the activation or registration process.

I hope this information helps you resolve your issue. If you have any further questions, feel free to ask.

 

[telecomic]

These are the

Spoiler: ORF Channels

ORF Channels
1330 : ORF2W HD
1331 : ServusTV HD Oesterreich
132F : ORF1 HD
32C9 : ORF1
32CA : ORF2
32CB : ORF2 W
32CC : ORF2 N
32CD : ORF2 B
32CE : ORF2 O
32CF : ORF2 S
32D0 : ORF2 T
32D1 : ORF2 V
32D2 : ORF2 St
32D3 : ORF2 K
32D4 : ATV
4E27 : PULS 4 Austria
33A7 : ATV2 HD
33A5 : ORF SPORT+
332D : ORF III
33AC : ATV HD
33FD : ORF SPORT+ HD
33FC : ORF III HD
33FB : ORF2V HD
33FA : ORF2T HD
33F9 : ORF2S HD
33F8 : ORF2O HD
33F7 : ORF2B HD
33F6 : ORF2K HD
33F5 : ORF2St HD
1334 : ORF2N HD
3337 : ServusTV Oesterreich
3402 : OE 24 (free TV)
14B8 : PULS 24 HD

oscam.services:
[orf-cw-d98]
caid = 0D98
provid = 000004
srvid = 1330,1331,132F,32C9,32CA,32CB,32CC,32CD,32CE,32CF,32D0,32D1,32D2,32D3,32D4,4E27,33A7,33A5,332D,33AC,33FD,33FC,33FB,33FA,33F9,33F8,33F7,33F6,33F5,1334,3337,3402,14B8

for your Card...

The other Channels are

Sie müssen registriert sein, um Links zu sehen.

... and with Activating of these Channels your Card will be paired... so there is no chance to open with oscam. Also let it be...
That was also just a 30-day trial offer

 

[MKLST2]

just for your info, dunno if it´s the same for other card owners
my card from 11/2022 came to me preactivated like yours did. I tryed to get it extended with CW-Reader but there isn´t a chance. IF I turn on irdeto-reader für 2 hours it extends.
Currently mine shows the date 21/02/2024, it was extended 2 weeks ago in irdeto-mode, and is runing in cw-mode since then..