NEWS! Python/Cobra 1.53! Enabling 8X MTD for DeltaCam!
Link ist nicht mehr aktiv.
Changes since version 1.52:
Link ist nicht mehr aktiv. (Emu FW - see
Changes since version 1.52:
Keep in mind that the Cobra firmware does not have the keys burnt in but requires the user to flash them via DeltaFlashLoader (softcam.key format is supported). The big advantage of this approach is that keys can easily be exchanged by users without requiring a firmware update.
8X MTD
MTD > 4X is mainly meant to be used with headends/playoutcenters where PIDs to descramble are manually configurable. 8 channels with 4 PIDs each on average can now be descrambled in parallel. This feature has already extensively been tested by our Dutch friends.
Digital Devices hardware does not allow more than 4 channels to be descrambled in parallel (driver limitation). We are currently negotiating with them to extend it.
Keep in mind that the number of channels that can be descrambled in parallel without glitches also depends on the SmartCard in use. With NDS VideoGuard, it is not advised to go any further than 4X. Enabling NDS FastMode inside the CAM menu might dramatically improve MTD performance.
DeltaFlashLoader 1.38 ( Link ist nicht mehr aktiv. | Link ist nicht mehr aktiv. | Link ist nicht mehr aktiv. | Link ist nicht mehr aktiv. )
Keep in mind that under Linux the DeltaFlashLoader has to be run with root privileges (sudo).
Link ist nicht mehr aktiv. (for Cobra only)
Most important included keys:
Link ist nicht mehr aktiv.
Changes since version 1.52:
- [NEW] 8X MTD
- Proper HW revision 2.0 support (HW revision is now displayed in ‘Version Info’ menu)
- Fixed CAT parsing and therefore incorrect EMM PID selection for Canal Digitaal (SECA MediaGuard) (thanks Pumuckel for reporting)
- Fixed handling EMM-UA (SmartCard activation) for Canal Digitaal (SECA MediaGuard3)
- EMM (SmartCard activation/update) is fixed for all SRG SSR SmartCards (ViACCESS 2.6 / 4.0 / 5.0) (thanks örlgrey for testing)
- Improved PMT handling for MTD (fixes problem with Kathrein, thanks angi59 for reporting)
Link ist nicht mehr aktiv. (Emu FW - see
Sie müssen registriert sein, um Links zu sehen.
)Changes since version 1.52:
- Includes all changes from Python 1.53
Keep in mind that the Cobra firmware does not have the keys burnt in but requires the user to flash them via DeltaFlashLoader (softcam.key format is supported). The big advantage of this approach is that keys can easily be exchanged by users without requiring a firmware update.
Sie müssen registriert sein, um Links zu sehen.
8X MTD
MTD > 4X is mainly meant to be used with headends/playoutcenters where PIDs to descramble are manually configurable. 8 channels with 4 PIDs each on average can now be descrambled in parallel. This feature has already extensively been tested by our Dutch friends.
Digital Devices hardware does not allow more than 4 channels to be descrambled in parallel (driver limitation). We are currently negotiating with them to extend it.
Keep in mind that the number of channels that can be descrambled in parallel without glitches also depends on the SmartCard in use. With NDS VideoGuard, it is not advised to go any further than 4X. Enabling NDS FastMode inside the CAM menu might dramatically improve MTD performance.
DeltaFlashLoader 1.38 ( Link ist nicht mehr aktiv. | Link ist nicht mehr aktiv. | Link ist nicht mehr aktiv. | Link ist nicht mehr aktiv. )
Keep in mind that under Linux the DeltaFlashLoader has to be run with root privileges (sudo).
Link ist nicht mehr aktiv. (for Cobra only)
Most important included keys:
- ORF Digital (19.2°E)
- AustriaSat / MTV (19.2°E)
- TNTSAT (19.2°E)
- SRG SSR (13.0°E)
- Skylink (23.5°E)
- Digitürk (7.0°E)
- UPC Cablecom Switzerland (thanks toshi)
Zuletzt bearbeitet: