Neue Dreambox Two friert nach aufwachen aus Idlemode oft ein.

[bimmler]

Hallo. Hab seit ca. 2 Wochen eine Dreambox Two. Diese habe ich mit GP4.2 + Nobody geflasht. Installiert aus den verfügbaren Erweiterungen habe ich bisher nur einen anderen Skin, Styles, Oscam, Autoresolution, Streamrelay und das Mediaportal+MPGZ.

Dies tat ich alles bei der DM900 (die ich nur kurz hatte) und auf der One die für meinen Dad war auch. Nie Probleme.

Ich hab in den letzten zwei Wochen die Two vielleicht nur 5,6 mal eingeschaltet (war mit anderen Dingen beschäftigt) seit dem ich sie eingerichtet habe.

Sie geht zwar immer an und der letzte Sender läuft dann auch, aber die Infobar friert ein und die Box lässt sich nicht mehr bedienen. Da hilft dann nur hinten am Kippschalter aus und wieder einschalten.

Was könnte da sein?

Könnte ein Log helfen, wenn ja welches müsste ich wo einschalten ?

 

[Leo888]

Nie den Schalter hinten zum Ausschalten verwenden. 7 Sekunden die Taste vorne und die Box fährt runter.
Da Du nun schon hinten ausgeschaltet hast, würde ich auf alle Fälle ein Backup flashen, ist das nicht zur Hand, neu einrichten und IDLE bei ner Box die in 30 Sekunden bootet, ist ebenfalls überflüssig, da in dem Modus die Box noch 90% aktiv ist

 

[bimmler]

Ich möchte aber im IDLE dennoch auf die Tuner bzw. Box zugreifen (Streaming oder auch SatPi), daher kann ich sie nicht in den Deepstanby schicken.

Ja das mit den 8 Sekunden (aus Taste auf Fernbedienung) kenn ich von der VU….da ich aber keine flackernde LED an der Box gesehen habe, dacht ich das dies nicht geht.

Ein Imagesicherung hab ich, klar kann ich einspielen. Aber da ich kaum was installiert habe, befürchte ich das eine Imagesicherung einzuspielen nicht all zu viel bringt. Aber werde ich später einfach mal machen.

 

[Leo888]

Nicht auf der FB, an der Box die Taste.
Das Backup restoren ist nötig, da man nie wissen kann, was mit dem harten Power off am Hauptschalter, Schaden genommen hat.

Wenn Du lieber neu aufsetzt, ist noch besser.

Warum die Box allerdings einfriert, ist eine andere Baustelle, meine macht das nicht.

 

[GummibärenBande]

Wurde denn die TWO auf den aktuellen Rescue-loader und Frontprozessor geprüft bevor das Image installiert wurde ?

Man liest das es zwingend notwenig ist bevor man alles andere mit der Box macht.

Sie müssen registriert sein, um Links zu sehen.

Das würde ich prüfen, bevor Du wieder Stunden mit etwas verbringst was nichts bringt.

 

[sodex]

die Infobar friert ein

Was könnte da sein?

da hätte ich den Skin den du verwendest in Verdacht
MfG

 

[bimmler]

Wurde denn die TWO auf den aktuellen Rescue-loader und Frontprozessor geprüft bevor das Image installiert wurde ?

Man liest das es zwingend notwenig ist bevor man alles andere mit der Box macht.

Sie müssen registriert sein, um Links zu sehen.

Das würde ich prüfen, bevor Du wieder Stunden mit etwas verbringst was nichts bringt.

Ja das habe ich gemacht bevor ich das Image geflasht habe. Genau nach der Anleitung.

Fronzprozessor ist: V1.14
Rescue Loader ist: 1.04
Dream OS: 4.5.1r11-2021-10-29
Image: Experimental 2022-02-24

da hätte ich den Skin den du verwendest in Verdacht
MfG

Ja klingt ein wenig danach. Es ist aber der Skin "Zombi Shadow-FHD", der ist vom GP Board und extra für das Image. Diesen Skin hatte ich auf der One und DM900 auch gehabt.
Jetzt ist es wieder passiert, nur das die Infobar nicht zu sehen war......letzter Kanal lief, box jedoch nicht bedienbar.

Habe das Backup eingespielt und jetzt heißt es schauen wir mal...

 

[sigi06]

probiere einfach andere Images wie Newnigma oder Merlin. Vielleicht wird dann der Fehler eingegrenzt..

 

[pj555]

und was soll damit bitte besser werden? Das installierte Image ist das Original-Image von Dream, erweitert um die Grundlagen für die GP-Plugins.
Wenn es mit den Images Probleme geben würde, gäbe es viel mehr Negativmeldungen.

 

[fly-tox]

Bitte ein

df -h

per telnet angeben und posten.
Nicht das du da irgendwo ein volle Speicher hast. (/data/)

 

[bimmler]

Spoiler

Filesystem          Size  Used Avail Use% Mounted on
/dev/root           3.9G  686M  3.0G  19% /
devtmpfs            991M     0  991M   0% /dev
tmpfs               993M     0  993M   0% /dev/shm
tmpfs               993M   57M  936M   6% /run
tmpfs               993M     0  993M   0% /sys/fs/cgroup
/dev/dreambox-data   11G  5.2G  4.5G  54% /data
tmpfs               993M   32K  993M   1% /tmp
tmpfs               993M  352K  993M   1% /var/volatile
/dev/sda1           1.8T  888M  1.7T   1% /media/hdd
/dev/sdb1           932G  757G  166G  83% /media/sdb1

Wenn die Box einfriert und trotzdem einen Kanal abspielt beim Starten, ist sie per WebIF und Telnet nicht erreichbar wie ich gerade festgestellt habe.

 

[Token]

schalte mal vor Standby auf einen Freetv-Sender -> bzw. installiere dir das Plugin, welches Dir diese Funktion anbietet!

 

[bimmler]

Hab jetzt enigma2-plugin-systemplugins-startupservice installiert und ARD HD gewählt. Mal sehen ob es was bringt...

 

[Token]

genau das meinte ich!

 

[bimmler]

So, anfänglich war alles gut, nun hab ich nach Start aus dem Idlemode zwei mal einen Greenscreen gehabt. Erkennt ihr was aus dem Log? Scheint was wegen Autoresolution zu tun zu haben.

Spoiler: crashlog

<?xml version="1.0" encoding="utf-8"?>
<opendreambox>
    <enigma2>
        <crashdate>So Mär 30 18:48:39 2025</crashdate>
        <!-- Please send this file to crashlog@dream-multimedia-tv.de. -->
        <skin>Zombi-Shadow-FHD/skin.xml</skin>
        <sourcedate>2021-10-29</sourcedate>
        <branch>master</branch>
        <rev>4.5.1r11</rev>
        <version>4.5.0</version>
    </enigma2>
    <image>
        <dreamboxmodel>two</dreamboxmodel>
        <kernelcmdline>logo=osd0,loaded,0x7f800000 vout=1080p60hz,enable hdmimode=1080p60hz fb_width=1280 fb_height=720 console=ttyS0,1000000 root=/dev/mmcblk0p7 rootwait rootfstype=ext4 no_console_suspend</kernelcmdline>
        <nimsockets>
            <![CDATA[
NIM Socket 0:
    Input_Name: A1
    Type: DVB-S2
    Name: Si2166D
    Has_Outputs: no
    Frontend_Device: 0
    I2C_Device: 2
NIM Socket 1:
    Input_Name: A2
    Type: DVB-S2
    Name: Si2166D
    Has_Outputs: no
    Frontend_Device: 1
    I2C_Device: 2
]]>
        </nimsockets>
        <imageversion>
            <![CDATA[
version=1000202202241112
]]>
        </imageversion>
        <imageissue>
            <![CDATA[
*****************************
*                           *
*   The Gemini Project 4.2  *
*                           *
*****************************
]]>
        </imageissue>
    </image>
    <software>
        <enigma2software>
            <![CDATA[
enigma2 - 4.5.1r11-r0.0 - Framebuffer-based digital media application
enigma2-autofs - 1.0-r0.5 - autofs configuration for enigma2
enigma2-defaultservices - 1.0-r0.7 - enigma2 default services/transponder
enigma2-hbbtv-plugin - 1.6r0-r0.0 - NPAPI based HBBTV Browser Plugin for enigma2
enigma2-journald - 1.0-r0.2 - journald configuration for enigma2
enigma2-meta - 4.5.1r11-r0.0 - Framebuffer-based digital media application
enigma2-plugin-extensions-audiosync - 4.4.1+git47+6490cecc1c-r0.0 - Set Bitstream/PCM audio delays
enigma2-plugin-extensions-autotimer - 4.4.1+git47+6490cecc1c-r0.0 - Automatically create timer events based on keywords
enigma2-plugin-extensions-babelzapper-meta - 4.4+git0+4bf475db2f+git0+4bf475db2f-r0.3 - Control your dreambox with only the MUTE button
enigma2-plugin-extensions-bitrateviewer-meta - 4.4.1+git2+5031e43b55-r0.38 - Shows average bitrate of video and audio
enigma2-plugin-extensions-browser - 4.5.1r11-r0.0 - Browse the web
enigma2-plugin-extensions-channelselectionplus - 0.1.1-r6 - ChannelSelection Plus new Options for the ServiceList
enigma2-plugin-extensions-curlytx-meta - 1:1.1.1+git0+6d13f83f4b-r0.3 - Fetch and display remote text files via HTTP
enigma2-plugin-extensions-cutlisteditor - 4.5.1r11-r0.0 - Cut movies
enigma2-plugin-extensions-enhancedmoviecenter - 1:20210724+git0+8d81d42936-r0.0 - EMC is an enhanced movielist replacement
enigma2-plugin-extensions-enhancedmoviecenter-meta - 1:20210724+git0+8d81d42936-r0.0 - EMC is an enhanced movielist replacement
enigma2-plugin-extensions-epgrefresh - 4.4.1+git47+6490cecc1c-r0.0 - Automatically refresh EPG
enigma2-plugin-extensions-epgsearch - 4.4.1+git47+6490cecc1c-r0.0 - Search through the EPG
enigma2-plugin-extensions-genuinedreambox - 4.4.1+git47+6490cecc1c-r0.0 - Genuine Dreambox verification
enigma2-plugin-extensions-graphmultiepg - 4.5.1r11-r0.0 - Graphical program guide
enigma2-plugin-extensions-hbbtv - 4.5.1r11-r0.0 - extensions-hbbtv
enigma2-plugin-extensions-infobartunerstate-meta - 1:4.0.3+git0+2c356db735-r0.0 - Show the tuner state as infobar popup
enigma2-plugin-extensions-jellyfindream - 1.0.2 - Jellyfin-Server.
enigma2-plugin-extensions-mediacenter - 4.5.1r11-r0.0 - extensions-mediacenter
enigma2-plugin-extensions-mediainfo - 3.1.0 - MediaInfo
enigma2-plugin-extensions-mediaportal - 2025011801 - MediaPortal
enigma2-plugin-extensions-mediarenderer - 4.5.1r11-r0.0 - extensions-mediarenderer
GEKÜRZT WEGEN 3000 ZEICHEN
]]>
        </gstreamersoftware>
    </software>
    <crashlogs>
        <enigma2crashlog>
            <![CDATA[
GC] cleanupOutdated
[eCec] handle message 0 -> f : 87 00 e0 91
[eCec] Device Vendor ID 00e091 (LG)
[eCec] --- KNOWN CEC DEVICES ---
[eCec] |- 0 (): 00e091 (LG), power=1
[eCec] |- 5 (AVC-X3800H): 0005cd (Denon), power=15
[eCec] --- KNOWN CEC DEVICES ---
[eCec] handle message 0 -> f : 87 00 e0 91
[eCec] Device Vendor ID 00e091 (LG)
[eCec] --- KNOWN CEC DEVICES ---
[eCec] |- 0 (): 00e091 (LG), power=1
[eCec] |- 5 (AVC-X3800H): 0005cd (Denon), power=15
[eCec] --- KNOWN CEC DEVICES ---
It's now  So 30 Mär 2025 18:47:18 CEST
[timer.py] next activation: 1743353338 (in 99999 ms)
It's now  So 30 Mär 2025 18:47:23 CEST
[timer.py] next activation: 1743353343 (in 99000 ms)
[eCec] handle message 0 -> f : 87 00 e0 91
[eCec] Device Vendor ID 00e091 (LG)
[eCec] --- KNOWN CEC DEVICES ---
[eCec] |- 0 (): 00e091 (LG), power=1
[eCec] |- 5 (AVC-X3800H): 0005cd (Denon), power=15
[eCec] --- KNOWN CEC DEVICES ---
[eCec] handle message 0 -> f : 87 00 e0 91
[eCec] Device Vendor ID 00e091 (LG)
[eCec] --- KNOWN CEC DEVICES ---
[eCec] |- 0 (): 00e091 (LG), power=1
[eCec] |- 5 (AVC-X3800H): 0005cd (Denon), power=15
[eCec] --- KNOWN CEC DEVICES ---
[eCec] handle message 0 -> f : 87 00 e0 91
[eCec] Device Vendor ID 00e091 (LG)
[eCec] --- KNOWN CEC DEVICES ---
[eCec] |- 0 (): 00e091 (LG), power=1
[eCec] |- 5 (AVC-X3800H): 0005cd (Denon), power=15
[eCec] --- KNOWN CEC DEVICES ---
It's now  So 30 Mär 2025 18:47:48 CEST
[timer.py] next activation: 1743353368 (in 99000 ms)
[eInputDevicehandlerDreamBLE::onCommand] 0x6b (7): 75 fe c6 34 09 00 b0
[eInputDeviceHandlerDreamBLE] BLE RCU  | 00:09:34:c6:fe:75: rssi=-80, bound=1, encrypted=1, connected=1, batteryLevel=91
[eInputDevicehandlerDreamBLE::onCommand] 0x6b (7): 75 fe c6 34 09 00 bf
[eInputDeviceHandlerDreamBLE] BLE RCU  | 00:09:34:c6:fe:75: rssi=-65, bound=1, encrypted=1, connected=1, batteryLevel=91
[eCec] handle message 0 -> f : 87 00 e0 91
[eCec] Device Vendor ID 00e091 (LG)
[eCec] --- KNOWN CEC DEVICES ---
[eCec] |- 0 (): 00e091 (LG), power=1
[eCec] |- 5 (AVC-X3800H): 0005cd (Denon), power=15
[eCec] --- KNOWN CEC DEVICES ---
[eInputDevicehandlerDreamBLE::onCommand] 0x6b (7): 75 fe c6 34 09 00 b2
[eInputDeviceHandlerDreamBLE] BLE RCU  | 00:09:34:c6:fe:75: rssi=-78, bound=1, encrypted=1, connected=1, batteryLevel=91
[eInputDevicehandlerDreamBLE::onCommand] 0x6b (7): 75 fe c6 34 09 00 c0
[eInputDeviceHandlerDreamBLE] BLE RCU  | 00:09:34:c6:fe:75: rssi=-64, bound=1, encrypted=1, connected=1, batteryLevel=91
[eInputDevicehandlerDreamBLE::onCommand] 0x6b (7): 75 fe c6 34 09 00 b1
[eInputDeviceHandlerDreamBLE] BLE RCU  | 00:09:34:c6:fe:75: rssi=-79, bound=1, encrypted=1, connected=1, batteryLevel=91
[eInputDevicehandlerDreamBLE::onCommand] 0x6b (7): 75 fe c6 34 09 00 c1
[eInputDeviceHandlerDreamBLE] BLE RCU  | 00:09:34:c6:fe:75: rssi=-63, bound=1, encrypted=1, connected=1, batteryLevel=91
[eInputDevicehandlerDreamBLE::onCommand] 0x6b (7): 75 fe c6 34 09 00 b3
[eInputDeviceHandlerDreamBLE] BLE RCU  | 00:09:34:c6:fe:75: rssi=-77, bound=1, encrypted=1, connected=1, batteryLevel=91
[eInputDevicehandlerDreamBLE::onCommand] 0x6b (7): 75 fe c6 34 09 00 c1
[eInputDeviceHandlerDreamBLE] BLE RCU  | 00:09:34:c6:fe:75: rssi=-63, bound=1, encrypted=1, connected=1, batteryLevel=91
[eInputDevicehandlerDreamBLE::onCommand] 0x6b (7): 75 fe c6 34 09 00 b3
[eInputDeviceHandlerDreamBLE] BLE RCU  | 00:09:34:c6:fe:75: rssi=-77, bound=1, encrypted=1, connected=1, batteryLevel=91
[eInputDevicehandlerDreamBLE::onCommand] 0x6b (7): 75 fe c6 34 09 00 c0
[eInputDeviceHandlerDreamBLE] BLE RCU  | 00:09:34:c6:fe:75: rssi=-64, bound=1, encrypted=1, connected=1, batteryLevel=91
[eInputDevicehandlerDreamBLE::onCommand] 0x6b (7): 75 fe c6 34 09 00 b3
[eInputDeviceHandlerDreamBLE] BLE RCU  | 00:09:34:c6:fe:75: rssi=-77, bound=1, encrypted=1, connected=1, batteryLevel=91
[eInputDevicehandlerDreamBLE::onCommand] 0x6b (7): 75 fe c6 34 09 00 c1
[eInputDeviceHandlerDreamBLE] BLE RCU  | 00:09:34:c6:fe:75: rssi=-63, bound=1, encrypted=1, connected=1, batteryLevel=91
[eInputDevicehandlerDreamBLE::onCommand] 0x6b (7): 75 fe c6 34 09 00 b3
[eInputDeviceHandlerDreamBLE] BLE RCU  | 00:09:34:c6:fe:75: rssi=-77, bound=1, encrypted=1, connected=1, batteryLevel=91
[eInputDevicehandlerDreamBLE::onCommand] 0x6b (7): 75 fe c6 34 09 00 c0
[eInputDeviceHandlerDreamBLE] BLE RCU  | 00:09:34:c6:fe:75: rssi=-64, bound=1, encrypted=1, connected=1, batteryLevel=91
[eCec] handle message 0 -> f : 87 00 e0 91
[eCec] Device Vendor ID 00e091 (LG)
[eCec] --- KNOWN CEC DEVICES ---
[eCec] |- 0 (): 00e091 (LG), power=1
[eCec] |- 5 (AVC-X3800H): 0005cd (Denon), power=15
[eCec] --- KNOWN CEC DEVICES ---
[EPGC] cleanupOutdated
[eInputDevicehandlerDreamBLE::onCommand] 0x6b (7): 75 fe c6 34 09 00 b0
[eInputDeviceHandlerDreamBLE] BLE RCU  | 00:09:34:c6:fe:75: rssi=-80, bound=1, encrypted=1, connected=1, batteryLevel=91
[eInputDevicehandlerDreamBLE::onCommand] 0x6b (7): 75 fe c6 34 09 00 bd
[eInputDeviceHandlerDreamBLE] BLE RCU  | 00:09:34:c6:fe:75: rssi=-67, bound=1, encrypted=1, connected=1, batteryLevel=91
[eInputDevicehandlerDreamBLE::onCommand] 0x6b (7): 75 fe c6 34 09 00 ac
[eInputDeviceHandlerDreamBLE] BLE RCU  | 00:09:34:c6:fe:75: rssi=-84, bound=1, encrypted=1, connected=1, batteryLevel=91
[eInputDevicehandlerDreamBLE::onCommand] 0x6b (7): 75 fe c6 34 09 00 bd
[eInputDeviceHandlerDreamBLE] BLE RCU  | 00:09:34:c6:fe:75: rssi=-67, bound=1, encrypted=1, connected=1, batteryLevel=91
[eCec] handle message 0 -> f : 87 00 e0 91
[eCec] Device Vendor ID 00e091 (LG)
[eCec] --- KNOWN CEC DEVICES ---
[eCec] |- 0 (): 00e091 (LG), power=1
[eCec] |- 5 (AVC-X3800H): 0005cd (Denon), power=15
[eCec] --- KNOWN CEC DEVICES ---
[eInputDevicehandlerDreamBLE::onCommand] 0x6b (7): 75 fe c6 34 09 00 b0
[eInputDeviceHandlerDreamBLE] BLE RCU  | 00:09:34:c6:fe:75: rssi=-80, bound=1, encrypted=1, connected=1, batteryLevel=91
[eInputDevicehandlerDreamBLE::onCommand] 0x6b (7): 75 fe c6 34 09 00 bd
[eInputDeviceHandlerDreamBLE] BLE RCU  | 00:09:34:c6:fe:75: rssi=-67, bound=1, encrypted=1, connected=1, batteryLevel=91
[eCec] handle message 0 -> f : 87 00 e0 91
[eCec] Device Vendor ID 00e091 (LG)
[eCec] --- KNOWN CEC DEVICES ---
[eCec] |- 0 (): 00e091 (LG), power=1
[eCec] |- 5 (AVC-X3800H): 0005cd (Denon), power=15
[eCec] --- KNOWN CEC DEVICES ---
[eInputDevicehandlerDreamBLE::onCommand] 0x6b (7): 75 fe c6 34 09 00 af
[eInputDeviceHandlerDreamBLE] BLE RCU  | 00:09:34:c6:fe:75: rssi=-81, bound=1, encrypted=1, connected=1, batteryLevel=91
[eInputDevicehandlerDreamBLE::onCommand] 0x6b (7): 75 fe c6 34 09 00 be
[eInputDeviceHandlerDreamBLE] BLE RCU  | 00:09:34:c6:fe:75: rssi=-66, bound=1, encrypted=1, connected=1, batteryLevel=91
[eCec] handle message 0 -> f : 87 00 e0 91
[eCec] Device Vendor ID 00e091 (LG)
[eCec] --- KNOWN CEC DEVICES ---
[eCec] |- 0 (): 00e091 (LG), power=1
[eCec] |- 5 (AVC-X3800H): 0005cd (Denon), power=15
[eCec] --- KNOWN CEC DEVICES ---
action ->  StandbyActions power
leave standby
playing 1:0:19:283D:3FB:1:C00000:0:0:0:
[TeleText] service started
not pauseable.
[1;33mW/  [InfoBar.__servicePlaying] :: <no detail>[1;m
I/  [InfoBar.setPlaybackState] :: None None 1743353317.07
allocate channel.. 03fb:0001:00c00000
[    0] opening frontend
[eDVBCAService] new channel 0x4316bb50!
[    0] tune type 1
RotorCmd ffffffff, lastRotorCmd ffffffffffffffff
[    0] prepare_sat System DVB-S2 Freq 11494000H SR 22000000 INV Auto FEC 2/3 orbpos 192 modulation 8PSK pilot Auto, rolloff 0.35
[    0] tuning to 1744 mhz
OURSTATE: tuning
allocate Channel: res 0
[SEC-0] update oparm
allocate demux
[SEC-0] lock 0
[SEC-0] locked 0
setInputSource input0 to A1
[SEC-0] set static current limiting
[SEC-0] invalidate current switch params
[SEC-0] setVoltage 18V
have 1 video stream(s) (13ed), and 1 audio stream(s) (13f2), and the pcr pid is 13ed, and the text pid is 13f0
allocate demux
[SEC-0] sleep 10ms
disable teletext subtitles page ffffffffffffffff (und)
decoder state: play, vpid=5101, apid=5106
DMX_SET_PES_FILTER(0x13ed) - pcr - ok
DEMUX_START - pcr - ok
[SEC-0] update current switch params
[SEC-0] startTuneTimeout 5000
[SEC-0] setFrontend 1
[    0] setting frontend
[SEC-0] unlock 0
[SEC-0] sleep 500ms
[eAudioPlayback] init, Codec: 1, samplerate: -1, channels: -1
eDVBAudio: tsReader configure PID 0x13f2 ok
eDVBAudio: setBufferSize PID 0x13f2 ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
DEMUX_START - audio - eDVBAudio: start ok
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x13ed) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
AUDIO_CONTINUE
[eAudioPlayback] Unpause
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
[1;33mW/  [InfoBar.__servicePlaying] :: <no detail>[1;m
I/  [InfoBar.setPlaybackState] :: None None 1743353317.1
not pauseable.
setLCDBrightness 153
[eCec] current powerstate = 0
[Cec] power on
[eCec] send 3 -> 0 : 04
[eCec] send 3 -> f : 82 10 00
[1;33mW/  [_write] :: 82[1;m
[1;33mW/  [_write] :: ff[1;m
[1;33mW/  [_write] :: 82[1;m
[1;33mW/  [_write] :: ff[1;m
I/  [InfoBar.__restoreState] :: <no detail>
[eInputDevicehandlerDreamBLE::onCommand] 0x8f (1): 01
[eInputDeviceHandlerDreamBLE::handleDefault] 8f [OK]!
[    0] fe event: status 0, freq 1744000, inversion off, m_tuning 1 F
[eInputDevicehandlerDreamBLE::onCommand] 0x87 (1): 01
[eInputDeviceHandlerDreamBLE::handleDefault] 87 [OK]!
[eInputDevicehandlerDreamBLE::onCommand] 0x87 (1): 01
[eInputDeviceHandlerDreamBLE::handleDefault] 87 [OK]!
[eInputDevicehandlerDreamBLE::onCommand] 0x87 (1): 01
[eInputDeviceHandlerDreamBLE::handleDefault] 87 [OK]!
[eInputDevicehandlerDreamBLE::onCommand] 0x87 (1): 01
[eInputDeviceHandlerDreamBLE::handleDefault] 87 [OK]!
[    0] fe event: status 6, freq 1744000, inversion off, m_tuning 1 N
eDVBAudio: skip TS PACKET (no PUSI) (5 times)
[    0] fe event: status 1f, freq 1744000, inversion off, m_tuning 2 N
OURSTATE: ok
[eDVBCAService] channel 0x4316bb50 running
[eDVBLocalTimeHandler] channel 0x4316bb50 running
no version filtering
0014:  70 00 00 00 00 00
mask:  fc 00 00 00 00 00
mode:  00 00 00 00 00 00
[EPGC] channel 0x4316bb50 running
[EPGC] next update in 2 sec
stop release channel timer
no version filtering
0012:  4e 28 3d 00 00 00
mask:  ff ff ff 00 00 00
mode:  00 00 00 00 00 00
ok ... now we start!!
no version filtering
0000:  00 00 00 00 00 00
mask:  ff 00 00 00 00 00
mode:  00 00 00 00 00 00
eDVBAudio: skip TS PACKET (no PUSI) (13 times)
VIDEO_GET_EVENT - ok
HDMI EXTCON event 'hdmitx_extcon_audio' 'HDMI=0'
eDVBAudio: skip TS PACKET (no PUSI) (8 times)
can't set new display mode (port, mode, rate) =>  None None None
HDMI EXTCON event 'hdmitx_extcon_hdmi' 'HDMI=0'
[eAudioManager::PrivateAML::load] got 2 modes
[eAudioManager::PrivateAML::parseAudioMode] PCM : 0
[eAudioManager::PrivateAML::parseSampleRates] got 3 rates for 0 ( 32/44.1/48 kHz)
[eCec] my physical: f.f.f.f  logical 3
[eCec] send 3 -> f : 84 ff ff 03
[eCec] send 3 -> f : 7d
eDVBAudio: first TS PACKET with PUSI
[eDVBLocalTimeHandler] Receiver time is 'Sun Mar 30 18:48:37 2025'
[eDVBLocalTimeHandler] Transponder time is 'Sun Mar 30 18:48:36 2025'
[eDVBLocalTimeHandler] diff is -1
[eDVBLocalTimeHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimeHandler] update RTC
[eDVBLocalTimeHandler] time_difference is -1
[eDVBLocalTimeHandler] update Linux Time
+- 1/2 TID 4e
+ 1/1 TID 00
done!
PATready
use pmtpid 13ec for service_id 283d
no version filtering
13ec:  02 28 3d 00 00 00
mask:  ff ff ff 00 00 00
mode:  00 00 00 00 00 00
doing version filtering
0000:  00 00 00 1d 00 00
mask:  ff 00 00 3f 00 00
mode:  00 00 00 3e 00 00
[SEC-0] set dynamic current limiting
[eInputDevicehandlerDreamBLE::onCommand] 0x32 (1): 01
[eInputDeviceHandlerDreamBLE::handleDefault] 32 [OK]!
[eInputDevicehandlerDreamBLE::onCommand] 0x33 (1): 01
[eInputDeviceHandlerDreamBLE::handleDefault] 33 [OK]!
Audio PTS 173af346, PCR 173b265f, diff 13081, calced 19831
eAudioDecoder: 1: SPDIF Sample Rate 48000(48000), channels 2(2), codec 86019
eAudioDecoder: 2: SPDIF Sample Rate 48000(48000), channels 2(2), codec 86019
eAudioDecoder: SPDIF_PTS 1173af346, 6144 bytes, 0b 77 f0 36 1e
eAlsaOutput(HDMI): state transition requested 5, old 0
eAlsaOutput(HDMI): PLAY_REQ
eAlsaOutput(HDMI): start with sample_rate 48000, channels 2(2), bits 16 ok
eAlsaOutput(SPDIF): state transition requested 5, old 0
eAlsaOutput(SPDIF): PLAY_REQ
eAlsaOutput(SPDIF): start with sample_rate 48000, channels 2(2), bits 16 ok
eAlsaOutput(HDMI): pcr 173af363 apts 173af346 a delay -29 (START)
eAlsaOutput(HDMI): Error (File descriptor in bad state)
eAlsaOutput(SPDIF): pcr 173af377 apts 173af346 a delay -49 (START)
eAlsaOutput(SPDIF): Error (File descriptor in bad state)
[eCec] handle message 5 -> 3 : 46
[eCec] Give OSD Name
[eCec] send 3 -> 5 : 47 44 72 65 61 6d 62 6f 78
+ 1/1 TID 02
done!
[eDVBCAService] new service 1:0:19:283D:3FB:1:C00000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:19:283D:3FB:1:C00000:0:0:0:
HBBTV broadcast data on pid 087b
HBBTV broadcast data on pid 1434
[eDVBCAService] demux 0 mask 01
[eDVBCAServiceConn] send 97 bytes to '/tmp/camd.socket'
9f 80 32 5d 03 28 3d 19 00 1b 01 81 08 00 c0 00 00 03 fb 00 01 82 02 01 00 84 02 13 ec 85 03 00 41 31 86 01 00 1b 13 ed 00 00 03 13 ee 00 00 03 13 ef 00 00 03 13 f3 00 00 06 13 f0 00 00 06 13 f2 00 00 05 04 92 00 00 0c 04 98 00 00 0b 08 7b 00 00 06 13 f1 00 00 06 13 f4 00 00 0b 14 34 00 00
[eDVBCIInterfaces] addPMTHandler 1:0:19:283D:3FB:1:C00000:0:0:0:
[eDVBCIInterfaces] gotPMT
eventNewProgramInfo 0 0
start ait on pid 0492
no version filtering
0492:  74 00 00 00 00 00
mask:  ff 00 00 00 00 00
mode:  00 00 00 00 00 00
have 1 video stream(s) (13ed), and 4 audio stream(s) (13ee, 13ef, 13f3, 13f2), and the pcr pid is 13ed, and the text pid is 13f0
decoder state: play, vpid=5101, apid=5106
AUDIO_CONTINUE
[eAudioPlayback] Unpause
eAlsaOutput(HDMI): thread state already ok
eAlsaOutput(SPDIF): thread state already ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
[1;33mW/  [InfoBar.__servicePlaying] :: <no detail>[1;m
I/  [InfoBar.setPlaybackState] :: None None 1743353317.83
HBBTV broadcast data on pid 087b
HBBTV broadcast data on pid 1434
[eDBusInterface::Private::sendEvent 1
[TeleText] serviceInfoChanged
[TeleText] TXT PID 5104 DEMUX 0
[TeleText] send array('B', [1, 19, 240, 0])
[AutoRes] service changed
doing version filtering
13ec:  02 28 3d 19 00 00
mask:  ff ff ff 3f 00 00
mode:  00 00 00 3e 00 00
VIDEO_GET_EVENT - ok
[AutoRes] got event evVideoProgressiveChanged
VIDEO_GET_EVENT - ok
[AutoRes] got event evFramerateChanged
[AutoRes] got event evVideoSizeChanged
++ 2/2 TID 4e
done!
[1;33mW/  [InfoBar.__servicePlaying] :: <no detail>[1;m
I/  [InfoBar.setPlaybackState] :: None None 1743353318.23
create buffer for widget 1920 x 1080
doing version filtering
0012:  4e 28 3d 17 00 00
mask:  ff ff ff 3f 00 00
mode:  00 00 00 3e 00 00
sdt update done!
[AutoRes] determineContent
[AutoRes] switch deinterlacer mode to auto (currently not working)
[AutoRes] new content is 1280x720p50
[AutoRes] determined videomode 720p
swig director exception (SWIG director method error.)
0x8ec204(sp=0x7fd179e390) <SwigDirector_eSlot0X::cb_func()+260>
0x538b04(sp=0x7fd179e3c0) <eTimer::activate()+388>
0x539aa8(sp=0x7fd179e440) <eMainloop_native::processOneEvent(int)+520>
0x7d8e48(sp=0x7fd179f540) <eMainloopQt::processEvents(QFlags<QEventLoop::ProcessEventsFlag>)+176>
0x7fa0da749c(sp=0x7fd179f6a0) <QEventLoop::exec(QFlags<QEventLoop::ProcessEventsFlag>)+244>
0x7fa0db0020(sp=0x7fd179f720) <QCoreApplication::exec()+136>
0x7d8d74(sp=0x7fd179f770) <eMainloopQt::runLoop()+28>
0x7df5f8(sp=0x7fd179f790) <KeyEvent::qt_metacall(QMetaObject::Call, int, void**)+7552>
0x7fa06e82cc(sp=0x7fd179f7b0) <PyEval_EvalFrameEx+21052>
Traceback (most recent call last):
  File "/usr/lib/enigma2/python/enigma.py", line 15838, in __call__
    return ret(*args, **kwargs)
  File "/usr/lib/enigma2/python/Plugins/SystemPlugins/AutoResolution/plugin.py", line 246, in determineContent
    self.changeVideomode()
  File "/usr/lib/enigma2/python/Plugins/SystemPlugins/AutoResolution/plugin.py", line 254, in changeVideomode
    self.setMode(mode)
  File "/usr/lib/enigma2/python/Plugins/SystemPlugins/AutoResolution/plugin.py", line 284, in setMode
    rate = config.av.videorate[mode].value
-------
KeyError: '720p'
]]>
        </enigma2crashlog>
        <pythonMD5sum>
            <![CDATA[
GEKÜRZT WEGEN 3000 ZEICHEN
]]>
        </pythonMD5sum>
    </crashlogs>
</opendreambox>