Archiv / Down Navigon 1410 EU 20 autoexece

<autorun version="1.0.0" autostartID="1"> <!-- with autostartID no UI is visible, without UI shows all application groups -->	
	<applicationGroup name="RegKeys - StartMN" ID="1" order="sequential">	
		<application name="startmn.exe" path="./startmn.exe"  onexit=""/>
	</applicationGroup>
</autorun>

[ProcessManager]
;Configuration file for rescue system control

;use logfile (0=dont log, 1=normal log, 2=log with size limit)
Uselogging=0
;Path to write Log file 
Logpath=\MN Settings\RESY.log
;Path to write Log file backup (if size restriction is active)  
Logpath2=\MN Settings\RESY_backup.log
;max size of the logfile in bytes
Maxlogfilesize=1000

;Path to executable (of MN7)
Navigatorexepath = .\NAVIGON\navigon.exe

;what to do at Process exit/crash 0=nothing 1=restart 2=reboot
;(avoid restart because of problems with open filehandles!)
Crashrecovery=2

;Path for route target file which ist written from MN7
Rescuedatapath=\MN Settings\NavigationRoute.resy

;Path to private status file of resy procmanager 
StatusFilePath=\MN Settings\ProcManStatus.resy

;How to check for new RESY file 1=length only , 2=no check - use countdowntimer
Checkmode=1

;how many restarts with same RESY file
Maxrestarts=3

;Show message box if exe could not be started
ExeStartFailureMessagebox=1

;countdown timer settings (only used in countdown timer check algorithm)
;the route target file is deleted when the countdowntimer is zero
;start value of the countdowntimer - this is also the maximum value 
LeakyBucketStart=10
;each crash and restart decreases this value from the countdowntimer
LeakyBucketDecrease=5
;!!but: the timer value is *increased* every minute by one during normal operation! 

;Check application thread table
UseThreadMonitor=0

;Maxmum of missing thread table updates (in sequence) until reboot request
MaxCounterUpdateFailures=10

;Create an (smothing) average of watchdog failures over all table updates
AverageFailureCountSmoothing=5

;Maximal accepted average smoothed failure value until reboot request
MaxAverageFailureLimit=4.0

;How many simultaneous thread watchdog failures are required for a reboot request
MaxPeakFailureLimit=6 

;Exit this monitor if application terminates with exit code zero (0=no, 1=yes)
CancelOnExitCodeZero=1