Martin1971
Newbie
- Registriert
- 4. Februar 2017
- Beiträge
- 12
- Reaktionspunkte
- 5
- Punkte
- 23
Hallo an Alle,
ich bräuchte mal Hilfe bein einstellen der Displayauflösung.Mit Kali-Linux passt die max. Auflösung von 1280x800 .
Mit MX-Linux 19 (Linux mx-acer 4.19.0-14-amd64 #1 SMP Debian 4.19.171-2 (2021-01-30) x86_64 GNU/Linux) nur 1078x768 .
Es wird der Vesa Treiber verwendet.Hier die Ausgabe von inxi -F
und lspci grep | vga
und die /etc/X11/xorg.conf
und xrandr
Laut synaptic package manager ist der Intel Grafiktreiber installiert.
Was kann ich noch tun um die 1280x800 Pixel Auflösung zu erreichen?
MfG-Martin
ich bräuchte mal Hilfe bein einstellen der Displayauflösung.Mit Kali-Linux passt die max. Auflösung von 1280x800 .
Mit MX-Linux 19 (Linux mx-acer 4.19.0-14-amd64 #1 SMP Debian 4.19.171-2 (2021-01-30) x86_64 GNU/Linux) nur 1078x768 .
Es wird der Vesa Treiber verwendet.Hier die Ausgabe von inxi -F
martin@mx-acer:~
$ inxi -F
System: Host: mx-acer Kernel: 4.19.0-14-amd64 x86_64 bits: 64 Console: tty 0
Distro: MX-19.3_x64 patito feo November 11 2020
Machine: Type: Kvm System: Acer product: TravelMate 6592 v: PSMBOU-1234567 serial: <root required>
Mobo: Acer model: TravelMate 6592 serial: <root required> BIOS: Acer v: 1.54 date: 11/21/08
Battery: ID-1: BAT0 charge: 41.4 Wh condition: 41.4/63.6 Wh (65%)
CPU: Topology: Dual Core model: Intel Core2 Duo T7500 bits: 64 type: MCP L2 cache: 4096 KiB
Speed: 904 MHz min/max: 800/2201 MHz Core speeds (MHz): 1: 904 2: 1289
Graphics: Device-1: Intel Mobile GM965/GL960 Integrated Graphics driver: N/A
Display: server: X.org 1.20.4 driver: vesa tty: 141x50
Message: Advanced graphics data unavailable in console. Try -G --display
Audio: Device-1: Intel 82801H HD Audio driver: snd_hda_intel
Sound Server: ALSA v: k4.19.0-14-amd64
Network: Device-1: Intel 82566MM Gigabit Network driver: e1000e
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 00:a0:d1:a2:4e:23
Device-2: Intel PRO/Wireless 4965 AG or AGN [Kedron] Network driver: iwl4965
IF: wlan0 state: down mac: 3e:a3:40:81:c6:55
Drives: Local Storage: total: 111.79 GiB used: 6.88 GiB (6.2%)
ID-1: /dev/sda vendor: Samsung model: MZ7KM120HAFD-00005 size: 111.79 GiB
Partition: ID-1: / size: 46.28 GiB used: 6.88 GiB (14.9%) fs: ext4 dev: /dev/sda1
ID-2: swap-1 size: 2.00 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda2
Sensors: System Temperatures: cpu: 16.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info: Processes: 164 Uptime: 1h 29m Memory: 3.78 GiB used: 467.1 MiB (12.1%) Init: SysVinit runlevel: 5 Shell: bash
inxi: 3.0.36
martin@mx-acer:~
$
$ inxi -F
System: Host: mx-acer Kernel: 4.19.0-14-amd64 x86_64 bits: 64 Console: tty 0
Distro: MX-19.3_x64 patito feo November 11 2020
Machine: Type: Kvm System: Acer product: TravelMate 6592 v: PSMBOU-1234567 serial: <root required>
Mobo: Acer model: TravelMate 6592 serial: <root required> BIOS: Acer v: 1.54 date: 11/21/08
Battery: ID-1: BAT0 charge: 41.4 Wh condition: 41.4/63.6 Wh (65%)
CPU: Topology: Dual Core model: Intel Core2 Duo T7500 bits: 64 type: MCP L2 cache: 4096 KiB
Speed: 904 MHz min/max: 800/2201 MHz Core speeds (MHz): 1: 904 2: 1289
Graphics: Device-1: Intel Mobile GM965/GL960 Integrated Graphics driver: N/A
Display: server: X.org 1.20.4 driver: vesa tty: 141x50
Message: Advanced graphics data unavailable in console. Try -G --display
Audio: Device-1: Intel 82801H HD Audio driver: snd_hda_intel
Sound Server: ALSA v: k4.19.0-14-amd64
Network: Device-1: Intel 82566MM Gigabit Network driver: e1000e
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 00:a0:d1:a2:4e:23
Device-2: Intel PRO/Wireless 4965 AG or AGN [Kedron] Network driver: iwl4965
IF: wlan0 state: down mac: 3e:a3:40:81:c6:55
Drives: Local Storage: total: 111.79 GiB used: 6.88 GiB (6.2%)
ID-1: /dev/sda vendor: Samsung model: MZ7KM120HAFD-00005 size: 111.79 GiB
Partition: ID-1: / size: 46.28 GiB used: 6.88 GiB (14.9%) fs: ext4 dev: /dev/sda1
ID-2: swap-1 size: 2.00 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda2
Sensors: System Temperatures: cpu: 16.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info: Processes: 164 Uptime: 1h 29m Memory: 3.78 GiB used: 467.1 MiB (12.1%) Init: SysVinit runlevel: 5 Shell: bash
inxi: 3.0.36
martin@mx-acer:~
$
und lspci grep | vga
martin@mx-acer:~
$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 03)
martin@mx-acer:~
$ modinfo -p i915
modeset:Use kernel modesetting [KMS] (0=disable, 1=on, -1=force vga console preference [default]) (int)
enable_dc:Enable power-saving display C-states. (-1=auto [default]; 0=disable; 1=up to DC5; 2=up to DC6) (int)
enable_fbc:Enable frame buffer compression for power savings (default: -1 (use per-chip default)) (int)
lvds_channel_mode:Specify LVDS channel mode (0=probe BIOS [default], 1=single-channel, 2=dual-channel) (int)
panel_use_ssc:Use Spread Spectrum Clock with panels [LVDS/eDP] (default: auto from VBT) (int)
vbt_sdvo_panel_type:Override/Ignore selection of SDVO panel mode in the VBT (-2=ignore, -1=auto [default], index in VBT BIOS table) (int)
reset:Attempt GPU resets (0=disabled, 1=full gpu reset, 2=engine reset [default]) (int)
vbt_firmware:Load VBT from specified file under /lib/firmware (charp)
error_capture:Record the GPU state following a hang. This information in /sys/class/drm/card<N>/error is vital for triaging and debugging hangs. (bool)
enable_hangcheck
eriodically check GPU activity for detecting hangs. WARNING: Disabling this can cause system wide hangs. (default: true) (bool)
enable_ppgtt:Override PPGTT usage. (-1=auto [default], 0=disabled, 1=aliasing, 2=full, 3=full with extended address space) (int)
enable_psr:Enable PSR (0=disabled, 1=enabled) Default: -1 (use per-chip default) (int)
alpha_support:Enable alpha quality driver support for latest hardware. See also CONFIG_DRM_I915_ALPHA_SUPPORT. (bool)
disable_power_well
isable display power wells when possible (-1=auto [default], 0=power wells always on, 1=power wells disabled when possible) (int)
enable_ips:Enable IPS (default: true) (int)
fastboot:Try to skip unnecessary mode sets at boot time (default: false) (bool)
prefault_disableisable page prefaulting for pread/pwrite/reloc (default:false). For developers only. (bool)
load_detect_test:Force-enable the VGA load detect code for testing (default:false). For developers only. (bool)
force_reset_modeset_test:Force a modeset during gpu reset for testing (default:false). For developers only. (bool)
invert_brightness:Invert backlight brightness (-1 force normal, 0 machine defaults, 1 force inversion), please report PCI device ID, subsystem vendor and subsystem device ID to dri-devel@lists.freedesktop.org, if your machine needs it. It will then be included in an upcoming module version. (int)
disable_displayisable display (default: false) (bool)
mmio_debug:Enable the MMIO debug code for the first N failures (default: off). This may negatively affect performance. (int)
verbose_state_checks:Enable verbose logs (ie. WARN_ON()) in case of unexpected hw state conditions. (bool)
nuclear_pageflip:Force enable atomic functionality on platforms that don't have full support yet. (bool)
edp_vswing:Ignore/Override vswing pre-emph table selection from VBT (0=use value from vbt [default], 1=low power swing(200mV),2=default swing(400mV)) (int)
enable_guc:Enable GuC load for GuC submission and/or HuC load. Required functionality can be selected using bitmask values. (-1=auto, 0=disable [default], 1=GuC submission, 2=HuC load) (int)
guc_log_level:GuC firmware logging level. Requires GuC to be loaded. (-1=auto [default], 0=disable, 1..4=enable with verbosity min..max) (int)
guc_firmware_path:GuC firmware path to use instead of the default one (charp)
huc_firmware_path:HuC firmware path to use instead of the default one (charp)
dmc_firmware_pathMC firmware path to use instead of the default one (charp)
enable_dp_mst:Enable multi-stream transport (MST) for new DisplayPort sinks. (default: true) (bool)
enable_dpcd_backlight:Enable support for DPCD backlight control (default:false) (bool)
enable_gvt:Enable support for Intel GVT-g graphics virtualization host support(default:false) (bool)
martin@mx-acer:~
$
$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 03)
martin@mx-acer:~
$ modinfo -p i915
modeset:Use kernel modesetting [KMS] (0=disable, 1=on, -1=force vga console preference [default]) (int)
enable_dc:Enable power-saving display C-states. (-1=auto [default]; 0=disable; 1=up to DC5; 2=up to DC6) (int)
enable_fbc:Enable frame buffer compression for power savings (default: -1 (use per-chip default)) (int)
lvds_channel_mode:Specify LVDS channel mode (0=probe BIOS [default], 1=single-channel, 2=dual-channel) (int)
panel_use_ssc:Use Spread Spectrum Clock with panels [LVDS/eDP] (default: auto from VBT) (int)
vbt_sdvo_panel_type:Override/Ignore selection of SDVO panel mode in the VBT (-2=ignore, -1=auto [default], index in VBT BIOS table) (int)
reset:Attempt GPU resets (0=disabled, 1=full gpu reset, 2=engine reset [default]) (int)
vbt_firmware:Load VBT from specified file under /lib/firmware (charp)
error_capture:Record the GPU state following a hang. This information in /sys/class/drm/card<N>/error is vital for triaging and debugging hangs. (bool)
enable_hangcheck
eriodically check GPU activity for detecting hangs. WARNING: Disabling this can cause system wide hangs. (default: true) (bool)enable_ppgtt:Override PPGTT usage. (-1=auto [default], 0=disabled, 1=aliasing, 2=full, 3=full with extended address space) (int)
enable_psr:Enable PSR (0=disabled, 1=enabled) Default: -1 (use per-chip default) (int)
alpha_support:Enable alpha quality driver support for latest hardware. See also CONFIG_DRM_I915_ALPHA_SUPPORT. (bool)
disable_power_well
isable display power wells when possible (-1=auto [default], 0=power wells always on, 1=power wells disabled when possible) (int)enable_ips:Enable IPS (default: true) (int)
fastboot:Try to skip unnecessary mode sets at boot time (default: false) (bool)
prefault_disable
isable page prefaulting for pread/pwrite/reloc (default:false). For developers only. (bool)load_detect_test:Force-enable the VGA load detect code for testing (default:false). For developers only. (bool)
force_reset_modeset_test:Force a modeset during gpu reset for testing (default:false). For developers only. (bool)
invert_brightness:Invert backlight brightness (-1 force normal, 0 machine defaults, 1 force inversion), please report PCI device ID, subsystem vendor and subsystem device ID to dri-devel@lists.freedesktop.org, if your machine needs it. It will then be included in an upcoming module version. (int)
disable_display
isable display (default: false) (bool)mmio_debug:Enable the MMIO debug code for the first N failures (default: off). This may negatively affect performance. (int)
verbose_state_checks:Enable verbose logs (ie. WARN_ON()) in case of unexpected hw state conditions. (bool)
nuclear_pageflip:Force enable atomic functionality on platforms that don't have full support yet. (bool)
edp_vswing:Ignore/Override vswing pre-emph table selection from VBT (0=use value from vbt [default], 1=low power swing(200mV),2=default swing(400mV)) (int)
enable_guc:Enable GuC load for GuC submission and/or HuC load. Required functionality can be selected using bitmask values. (-1=auto, 0=disable [default], 1=GuC submission, 2=HuC load) (int)
guc_log_level:GuC firmware logging level. Requires GuC to be loaded. (-1=auto [default], 0=disable, 1..4=enable with verbosity min..max) (int)
guc_firmware_path:GuC firmware path to use instead of the default one (charp)
huc_firmware_path:HuC firmware path to use instead of the default one (charp)
dmc_firmware_path
MC firmware path to use instead of the default one (charp)enable_dp_mst:Enable multi-stream transport (MST) for new DisplayPort sinks. (default: true) (bool)
enable_dpcd_backlight:Enable support for DPCD backlight control (default:false) (bool)
enable_gvt:Enable support for Intel GVT-g graphics virtualization host support(default:false) (bool)
martin@mx-acer:~
$
und die /etc/X11/xorg.conf
#-----------------------------------------------------------------------------
# xorg.conf file
#
# Generated by make-xorg-conf sometime around Mon Feb 22 12:39:01 CET 2021
#
# If you want to save customizations, delete the line above or this
# file will get automatically deleted on the next live boot.
#
# Command line parameters: --output=/etc/X11/xorg.conf vesa
#-----------------------------------------------------------------------------
Section "Device"
Identifier "devname"
Driver "vesa"
EndSection
# xorg.conf file
#
# Generated by make-xorg-conf sometime around Mon Feb 22 12:39:01 CET 2021
#
# If you want to save customizations, delete the line above or this
# file will get automatically deleted on the next live boot.
#
# Command line parameters: --output=/etc/X11/xorg.conf vesa
#-----------------------------------------------------------------------------
Section "Device"
Identifier "devname"
Driver "vesa"
EndSection
und xrandr
$ xrandr
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 800 x 600, current 1024 x 768, maximum 1024 x 768
default connected primary 1024x768+0+0 0mm x 0mm
800x600 0.00
1024x768 0.00*
martin@mx-acer:~
$
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 800 x 600, current 1024 x 768, maximum 1024 x 768
default connected primary 1024x768+0+0 0mm x 0mm
800x600 0.00
1024x768 0.00*
martin@mx-acer:~
$
Laut synaptic package manager ist der Intel Grafiktreiber installiert.
Was kann ich noch tun um die 1280x800 Pixel Auflösung zu erreichen?
MfG-Martin
Zuletzt bearbeitet: