KPCS KPCS Kablbw v23 läuftnicht

Hallo,
hab die Konfigs die ich bei euch gefunden habe getestet und es kommt immer:
2011/11/07 09:27:26 [ r 0002 ] Device: /dev/ttyUSB1, 16139 bps; 8 bits/byte; Even parity; 2 stopbits; dtr=1; rts=0

2011/11/07 09:27:27 [ r 0002 ] card detected

2011/11/07 09:27:31 [ r 0002 ] Device: /dev/ttyUSB1, 16139 bps; 8 bits/byte; Odd parity; 2 stopbits; dtr=1; rts=0

2011/11/07 09:27:32 [ r 0002 ] Device: /dev/ttyUSB1, 16139 bps; 8 bits/byte; None parity; 2 stopbits; dtr=1; rts=0

2011/11/07 09:27:33 [ r 0002 ] Device: /dev/ttyUSB1, 16139 bps; 8 bits/byte; Odd parity; 2 stopbits; dtr=1; rts=0

2011/11/07 09:27:34 [ r 0002 ] Protocol: T=0: WWT=595 WI=10 F=372 Clock=6.00Mhz

2011/11/07 09:27:34 [ r 0002 ] ATR: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
2011/11/07 09:27:35 [ r 0002 ] Device: /dev/ttyUSB1, 129729 bps; 8 bits/byte; Odd parity; 2 stopbits; dtr=1; rts=0

2011/11/07 09:27:37 [ r 0002 ] card system not supported

2011/11/07 09:27:37 [ r 0002 ] card initializing error

2011/11/07 09:27:37 [ r 0002 ] card detected

2011/11/07 09:27:37 [ r 0002 ] ATR:

2011/11/07 09:27:38 [ r 0002 ] card system not supported

2011/11/07 09:27:38 [ r 0002 ] card initializing error

2011/11/07 09:27:38 [ r 0002 ] Close /dev/ttyUSB1

2011/11/07 09:27:39 [ r 0002 ] Open /dev/ttyUSB1

2011/11/07 09:27:39 [ r 0002 ] Device: /dev/ttyUSB1, 16139 bps; 8 bits/byte; Even parity; 2 stopbits; dtr=1; rts=0

2011/11/07 09:27:40 [ r 0002 ] card detected

2011/11/07 09:27:44 [ r 0002 ] Device: /dev/ttyUSB1, 16139 bps; 8 bits/byte; Odd parity; 2 stopbits; dtr=1; rts=0

2011/11/07 09:27:46 [ r 0002 ] Device: /dev/ttyUSB1, 16139 bps; 8 bits/byte; None parity; 2 stopbits; dtr=1; rts=0

2011/11/07 09:27:47 [ r 0002 ] Device: /dev/ttyUSB1, 16139 bps; 8 bits/byte; Odd parity; 2 stopbits; dtr=1; rts=0

2011/11/07 09:27:48 [ r 0002 ] Protocol: T=0: WWT=595 WI=10 F=372 Clock=6.00Mhz

2011/11/07 09:27:48 [ r 0002 ] ATR: XXXXXXXXXXXXXXXXXXXXX

2011/11/07 09:27:49 [ r 0002 ] Device: /dev/ttyUSB1, 129729 bps; 8 bits/byte; Odd parity; 2 stopbits; dtr=1; rts=0

2011/11/07 09:27:50 [ r 0002 ] card system not supported

2011/11/07 09:27:50 [ r 0002 ] card initializing error

2011/11/07 09:27:50 [ r 0002 ] card detected

2011/11/07 09:27:50 [ r 0002 ] ATR:

2011/11/07 09:27:51 [ r 0002 ] card system not supported

2011/11/07 09:27:51 [ r 0002 ] card initializing error

2011/11/07 09:27:51 [ r 0002 ] Close /dev/ttyUSB1

Kann mir da jemand helfen bitte????

Gruß

rkomm

AW: KPCS Kablbw v23 läuftnicht

Prüfe mal den Dev ob der stimmt, den bei mir ging die Karte zu 100 % , nur die emm gehen nicht kommen nur error emm durch und das langt nicht

AW: KPCS Kablbw v23 läuftnicht

Habs hin bekommen

Danke