Dies ist eine mobil optimierte Seite, die schnell lädt. Wenn Sie die Seite ohne Optimierung laden möchten, dann klicken Sie auf diesen Text.

irgendwie krieg ich das mit der V14 Karte und der Dream800SeV2 nicht hin.

    Nobody is reading this thread right now.
AW: irgendwie krieg ich das mit der V14 Karte und der Dream800SeV2 nicht hin.

Ja mir der Version komme ich ja ins webif. Aber wie gesagt leider Card not supported...... Sobald ich eine neuere Version mit der gleichen config nehme, kann ich trotz Neustart etc. Nicht mehr ins webif. Schnall das alles nicht
 
AW: irgendwie krieg ich das mit der V14 Karte und der Dream800SeV2 nicht hin.

du hattest aber eine neuere mit pcsc genommen, die ist aber in alter nicht drin, pcsc fehlt im image,
also nur libusb ohne pcsc nehmen
 
So bin jetzt auf Oscam r10777, ändert nichts

  • 2015/07/04 13:45:40 76B00588 r (reader) skyv14_2 [internal] Deactivating card
  • 2015/07/04 13:45:41 76B00CC8 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
  • 2015/07/04 13:45:42 009BA0A8 h (reader) skyv14_2 [internal] Restarting reader
  • 2015/07/04 13:45:42 009BA0A8 h (reader) skyv14_2 [internal] creating thread for device /dev/sci1
  • 2015/07/04 13:45:42 009D2718 r (reader) skyv14_2 [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=5.40 MHz)
  • 2015/07/04 13:45:42 009D2718 r (reader) skyv14_2 [internal] Reader sci internal, detected box type: dm800sev2
  • 2015/07/04 13:45:43 009D2718 r (reader) skyv14_2 [internal] card detected
  • 2015/07/04 13:45:44 009D2718 r (reader) skyv14_2 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
  • 2015/07/04 13:45:44 009D2718 r (reader) skyv14_2 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2015/07/04 13:45:44 009D2718 r (reader) skyv14_2 [internal] Calculated work ETU is 5.93 us reader mhz = 540
  • 2015/07/04 13:45:44 009D2718 r (reader) skyv14_2 [internal] Buffers readed 0 bytes total time_us 75545
  • 2015/07/04 13:45:45 76B00CC8 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
  • 2015/07/04 13:45:45 009D2718 r (reader) skyv14_2 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->mhz)
  • 2015/07/04 13:45:45 009D2718 r (reader) skyv14_2 [internal] Card responded ok for ifsd request of 160
  • 2015/07/04 13:45:46 009D2718 r (reader) skyv14_2 [internal] detect native nagra card
  • 2015/07/04 13:45:48 76B00CC8 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
  • 2015/07/04 13:45:48 009D2718 r (reader) skyv14_2 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2015/07/04 13:45:49 009D2718 r (reader) skyv14_2 [internal] T1 Resync command error, trying to reactivate!
  • 2015/07/04 13:45:51 009D2718 r (reader) skyv14_2 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
  • 2015/07/04 13:45:51 009D2718 r (reader) skyv14_2 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2015/07/04 13:45:51 009D2718 r (reader) skyv14_2 [internal] Calculated work ETU is 5.93 us reader mhz = 540
  • 2015/07/04 13:45:51 009D2718 r (reader) skyv14_2 [internal] Buffers readed 0 bytes total time_us 75192
  • 2015/07/04 13:45:52 009D2718 r (reader) skyv14_2 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->mhz)
  • 2015/07/04 13:45:52 009D2718 r (reader) skyv14_2 [internal] Card responded ok for ifsd request of 160
  • 2015/07/04 13:45:52 009D2718 r (reader) skyv14_2 [internal] card system not supported
  • 2015/07/04 13:45:52 009D2718 r (reader) skyv14_2 [internal] Normal mode failed, reverting to Deprecated Mode
  • 2015/07/04 13:45:52 76B00CC8 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
  • 2015/07/04 13:45:53 009D2718 r (reader) skyv14_2 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
  • 2015/07/04 13:45:53 009D2718 r (reader) skyv14_2 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2015/07/04 13:45:53 009D2718 r (reader) skyv14_2 [internal] Calculated work ETU is 82.67 us reader mhz = 450
  • 2015/07/04 13:45:53 009D2718 r (reader) skyv14_2 [internal] Buffers readed 0 bytes total time_us 75169
  • 2015/07/04 13:45:54 009D2718 r (reader) skyv14_2 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
  • 2015/07/04 13:45:55 009D2718 r (reader) skyv14_2 [internal] Warning: Card returned error on setting ifsd value to 160
  • 2015/07/04 13:45:56 76B00CC8 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
  • 2015/07/04 13:45:56 009D2718 r (reader) skyv14_2 [internal] detect native nagra card
  • 2015/07/04 13:45:58 009D2718 r (reader) skyv14_2 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2015/07/04 13:45:59 76B00CC8 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
  • 2015/07/04 13:45:59 009D2718 r (reader) skyv14_2 [internal] T1 Resync command error, trying to reactivate!
  • 2015/07/04 13:46:01 009D2718 r (reader) skyv14_2 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
  • 2015/07/04 13:46:01 009D2718 r (reader) skyv14_2 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2015/07/04 13:46:01 009D2718 r (reader) skyv14_2 [internal] Calculated work ETU is 5.93 us reader mhz = 540
  • 2015/07/04 13:46:01 009D2718 r (reader) skyv14_2 [internal] Buffers readed 0 bytes total time_us 75180
  • 2015/07/04 13:46:01 009D2718 r (reader) skyv14_2 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->mhz)
  • 2015/07/04 13:46:01 009D2718 r (reader) skyv14_2 [internal] Card responded ok for ifsd request of 160
  • 2015/07/04 13:46:03 76B00CC8 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
  • 2015/07/04 13:46:04 009D2718 r (reader) skyv14_2 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2015/07/04 13:46:05 009D2718 r (reader) skyv14_2 [internal] T1 Resync command error, trying to reactivate!
  • 2015/07/04 13:46:06 76B00CC8 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
  • 2015/07/04 13:46:06 009D2718 r (reader) skyv14_2 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
  • 2015/07/04 13:46:06 009D2718 r (reader) skyv14_2 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2015/07/04 13:46:06 009D2718 r (reader) skyv14_2 [internal] Calculated work ETU is 5.93 us reader mhz = 540
  • 2015/07/04 13:46:06 009D2718 r (reader) skyv14_2 [internal] Buffers readed 0 bytes total time_us 75244
  • 2015/07/04 13:46:07 009D2718 r (reader) skyv14_2 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->mhz)
  • 2015/07/04 13:46:07 009D2718 r (reader) skyv14_2 [internal] Card responded ok for ifsd request of 160
  • 2015/07/04 13:46:07 009D2718 r (reader) skyv14_2 [internal] card system not supported
  • 2015/07/04 13:46:07 009D2718 r (reader) skyv14_2 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
  • 2015/07/04 13:46:07 009D2718 r (reader) skyv14_2 [internal] card initializing error

So bin jetzt auf Oscam r10777, ändert nichts

  • 2015/07/04 13:45:40 76B00588 r (reader) skyv14_2 [internal] Deactivating card
  • 2015/07/04 13:45:41 76B00CC8 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
  • 2015/07/04 13:45:42 009BA0A8 h (reader) skyv14_2 [internal] Restarting reader
  • 2015/07/04 13:45:42 009BA0A8 h (reader) skyv14_2 [internal] creating thread for device /dev/sci1
  • 2015/07/04 13:45:42 009D2718 r (reader) skyv14_2 [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=5.40 MHz)
  • 2015/07/04 13:45:42 009D2718 r (reader) skyv14_2 [internal] Reader sci internal, detected box type: dm800sev2
  • 2015/07/04 13:45:43 009D2718 r (reader) skyv14_2 [internal] card detected
  • 2015/07/04 13:45:44 009D2718 r (reader) skyv14_2 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
  • 2015/07/04 13:45:44 009D2718 r (reader) skyv14_2 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2015/07/04 13:45:44 009D2718 r (reader) skyv14_2 [internal] Calculated work ETU is 5.93 us reader mhz = 540
  • 2015/07/04 13:45:44 009D2718 r (reader) skyv14_2 [internal] Buffers readed 0 bytes total time_us 75545
  • 2015/07/04 13:45:45 76B00CC8 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
  • 2015/07/04 13:45:45 009D2718 r (reader) skyv14_2 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->mhz)
  • 2015/07/04 13:45:45 009D2718 r (reader) skyv14_2 [internal] Card responded ok for ifsd request of 160
  • 2015/07/04 13:45:46 009D2718 r (reader) skyv14_2 [internal] detect native nagra card
  • 2015/07/04 13:45:48 76B00CC8 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
  • 2015/07/04 13:45:48 009D2718 r (reader) skyv14_2 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2015/07/04 13:45:49 009D2718 r (reader) skyv14_2 [internal] T1 Resync command error, trying to reactivate!
  • 2015/07/04 13:45:51 009D2718 r (reader) skyv14_2 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
  • 2015/07/04 13:45:51 009D2718 r (reader) skyv14_2 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2015/07/04 13:45:51 009D2718 r (reader) skyv14_2 [internal] Calculated work ETU is 5.93 us reader mhz = 540
  • 2015/07/04 13:45:51 009D2718 r (reader) skyv14_2 [internal] Buffers readed 0 bytes total time_us 75192
  • 2015/07/04 13:45:52 009D2718 r (reader) skyv14_2 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->mhz)
  • 2015/07/04 13:45:52 009D2718 r (reader) skyv14_2 [internal] Card responded ok for ifsd request of 160
  • 2015/07/04 13:45:52 009D2718 r (reader) skyv14_2 [internal] card system not supported
  • 2015/07/04 13:45:52 009D2718 r (reader) skyv14_2 [internal] Normal mode failed, reverting to Deprecated Mode
  • 2015/07/04 13:45:52 76B00CC8 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
  • 2015/07/04 13:45:53 009D2718 r (reader) skyv14_2 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
  • 2015/07/04 13:45:53 009D2718 r (reader) skyv14_2 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2015/07/04 13:45:53 009D2718 r (reader) skyv14_2 [internal] Calculated work ETU is 82.67 us reader mhz = 450
  • 2015/07/04 13:45:53 009D2718 r (reader) skyv14_2 [internal] Buffers readed 0 bytes total time_us 75169
  • 2015/07/04 13:45:54 009D2718 r (reader) skyv14_2 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
  • 2015/07/04 13:45:55 009D2718 r (reader) skyv14_2 [internal] Warning: Card returned error on setting ifsd value to 160
  • 2015/07/04 13:45:56 76B00CC8 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
  • 2015/07/04 13:45:56 009D2718 r (reader) skyv14_2 [internal] detect native nagra card
  • 2015/07/04 13:45:58 009D2718 r (reader) skyv14_2 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2015/07/04 13:45:59 76B00CC8 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
  • 2015/07/04 13:45:59 009D2718 r (reader) skyv14_2 [internal] T1 Resync command error, trying to reactivate!
  • 2015/07/04 13:46:01 009D2718 r (reader) skyv14_2 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
  • 2015/07/04 13:46:01 009D2718 r (reader) skyv14_2 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2015/07/04 13:46:01 009D2718 r (reader) skyv14_2 [internal] Calculated work ETU is 5.93 us reader mhz = 540
  • 2015/07/04 13:46:01 009D2718 r (reader) skyv14_2 [internal] Buffers readed 0 bytes total time_us 75180
  • 2015/07/04 13:46:01 009D2718 r (reader) skyv14_2 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->mhz)
  • 2015/07/04 13:46:01 009D2718 r (reader) skyv14_2 [internal] Card responded ok for ifsd request of 160
  • 2015/07/04 13:46:03 76B00CC8 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
  • 2015/07/04 13:46:04 009D2718 r (reader) skyv14_2 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2015/07/04 13:46:05 009D2718 r (reader) skyv14_2 [internal] T1 Resync command error, trying to reactivate!
  • 2015/07/04 13:46:06 76B00CC8 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
  • 2015/07/04 13:46:06 009D2718 r (reader) skyv14_2 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
  • 2015/07/04 13:46:06 009D2718 r (reader) skyv14_2 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2015/07/04 13:46:06 009D2718 r (reader) skyv14_2 [internal] Calculated work ETU is 5.93 us reader mhz = 540
  • 2015/07/04 13:46:06 009D2718 r (reader) skyv14_2 [internal] Buffers readed 0 bytes total time_us 75244
  • 2015/07/04 13:46:07 009D2718 r (reader) skyv14_2 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->mhz)
  • 2015/07/04 13:46:07 009D2718 r (reader) skyv14_2 [internal] Card responded ok for ifsd request of 160
  • 2015/07/04 13:46:07 009D2718 r (reader) skyv14_2 [internal] card system not supported
  • 2015/07/04 13:46:07 009D2718 r (reader) skyv14_2 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
  • 2015/07/04 13:46:07 009D2718 r (reader) skyv14_2 [internal] card initializing error

Mal eine ganz doofe Frage, habe ja 2 Kartenslots...also noch eine sky_v14_1 reader......
Dort ist eine ältere HD+ Karte drin.... welche ist denn jetzt welche?!

Hier der log des readers

  • 2015/07/04 13:49:35 005980A8 r (reader) skyv14_2 [internal] Deactivating card
  • 2015/07/04 13:49:36 778009B8 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
  • 2015/07/04 13:49:37 00598988 h (reader) skyv14_1 [internal] Restarting reader
  • 2015/07/04 13:49:37 00598988 h (reader) skyv14_1 [internal] creating thread for device /dev/sci0
  • 2015/07/04 13:49:37 005A7128 r (reader) skyv14_1 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=5.40 MHz)
  • 2015/07/04 13:49:37 005A7128 r (reader) skyv14_1 [internal] Reader sci internal, detected box type: dm800sev2
  • 2015/07/04 13:49:38 005A7128 r (reader) skyv14_1 [internal] card detected
  • 2015/07/04 13:49:39 778009B8 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
  • 2015/07/04 13:49:41 005A7128 r (reader) skyv14_1 [internal] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
  • 2015/07/04 13:49:41 005A7128 r (reader) skyv14_1 [internal] Init card protocol T14, FI=2, F=558, D=1, N=0
  • 2015/07/04 13:49:41 005A7128 r (reader) skyv14_1 [internal] Calculated work ETU is 103.33 us reader mhz = 540
  • 2015/07/04 13:49:41 005A7128 r (reader) skyv14_1 [internal] Buffers readed 0 bytes total time_us 75182
  • 2015/07/04 13:49:42 005A7128 r (reader) skyv14_1 [internal] PLL Reader: ATR Fsmax is 6 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->mhz)
  • 2015/07/04 13:49:42 778009B8 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
  • 2015/07/04 13:49:43 005A7128 r (reader) skyv14_1 [internal] detect irdeto tunneled nagra card
  • 2015/07/04 13:49:43 005A7128 r (reader) skyv14_1 [internal] no rsa key configured -> using irdeto mode
  • 2015/07/04 13:49:43 005A7128 r (reader) skyv14_1 [internal] detect irdeto card
  • 2015/07/04 13:49:43 005A7128 r (reader) skyv14_1 [internal] caid: 1702, acs: 3.84, country code: GER
  • 2015/07/04 13:49:43 005A7128 r (reader) skyv14_1 [internal] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
  • 2015/07/04 13:49:46 005A7128 r (reader) skyv14_1 [internal] WARNING: For Irdeto cards you will have to set 'mhz= 600' in oscam.server
  • 2015/07/04 13:49:46 005A7128 r (reader) skyv14_1 [internal] active providers: 2 (000000,000000)
  • 2015/07/04 13:49:46 005A7128 r (reader) skyv14_1 [internal] found card system irdeto
  • 2015/07/04 13:49:46 005A7128 r (reader) skyv14_1 [irdeto] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
  • 2015/07/04 13:49:46 778009B8 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
  • 2015/07/04 13:49:46 005A7128 r (reader) skyv14_1 [irdeto] entitlements for provider: 2, id: 000000
  • 2015/07/04 13:49:46 005A7128 r (reader) skyv14_1 [irdeto] chid: 0103, date: 2008/09/25 - 2008/10/11
  • 2015/07/04 13:49:46 005A7128 r (reader) skyv14_1 [irdeto] chid: 029C, date: 2008/01/19 - 2008/01/21
  • 2015/07/04 13:49:46 005A7128 r (reader) skyv14_1 [irdeto] chid: 0104, date: 2008/09/25 - 2008/10/11
  • 2015/07/04 13:49:46 005A7128 r (reader) skyv14_1 [irdeto] chid: 0406, date: 2008/01/19 - 2008/01/21
  • 2015/07/04 13:49:46 005A7128 r (reader) skyv14_1 [irdeto] chid: 0105, date: 2008/09/25 - 2008/10/11
  • 2015/07/04 13:49:46 005A7128 r (reader) skyv14_1 [irdeto] chid: 0004, date: 2008/01/19 - 2008/01/21
  • 2015/07/04 13:49:46 005A7128 r (reader) skyv14_1 [irdeto] ready for requests
 
Zuletzt bearbeitet von einem Moderator:
AW: irgendwie krieg ich das mit der V14 Karte und der Dream800SeV2 nicht hin.

Hi

du weisst dass die angebliche sky14_2 eine HD02 ist.

HF
 
AW: irgendwie krieg ich das mit der V14 Karte und der Dream800SeV2 nicht hin.

Oh nein..... Dann ist iredo die v14 s02?
 
AW: irgendwie krieg ich das mit der V14 Karte und der Dream800SeV2 nicht hin.

ist eine S02
  • 2015/07/04 13:49:43 005A7128 r (reader) skyv14_1 [internal] caid: 1702, acs: 3.84, country code: GER
Zum Vergrößern anklicken....
 
AW: irgendwie krieg ich das mit der V14 Karte und der Dream800SeV2 nicht hin.

Hi

was steht auf der Karte ??

HF
 
AW: irgendwie krieg ich das mit der V14 Karte und der Dream800SeV2 nicht hin.

Ok sehr ärgerlich und dumm von mir. Tja noob halt.... Aber was sagt denn das log? Eigentlich ok, aber er schreibt mir keine emm ins Verzeichnis?!
 
AW: irgendwie krieg ich das mit der V14 Karte und der Dream800SeV2 nicht hin.

Hi

die Reader Einstellungen gehören da anderes, damit emm geloggt wird.

HF
 
AW: irgendwie krieg ich das mit der V14 Karte und der Dream800SeV2 nicht hin.

Auf der Sky Karte v14, s02
Die HD + Karte hd02
 
Zuletzt bearbeitet von einem Moderator:
AW: irgendwie krieg ich das mit der V14 Karte und der Dream800SeV2 nicht hin.

auf der Sky Karte steht v14 s02
????
mach mal Screen....
 
AW: irgendwie krieg ich das mit der V14 Karte und der Dream800SeV2 nicht hin.

Entschuldigung auf der Sky Karte steht s02 und nagravision
 
Zuletzt bearbeitet von einem Moderator:
AW: irgendwie krieg ich das mit der V14 Karte und der Dream800SeV2 nicht hin.

wenn auf der Karte S02 steht
wozu der ganze Aufwand
 
AW: irgendwie krieg ich das mit der V14 Karte und der Dream800SeV2 nicht hin.

Bitte klär mich mal auf. Ich dachte die neue Karte laut schreiben ist v14?! Stand so im Brief?!
 
Du musst dich einloggen oder registrieren, um hier zu antworten.

Ähnliche Themen

Frage IPC Oscam mit Emu-Kompilierungsproblem
3 4 5
Antworten
61
Aufrufe
5K
Alex
H
Keine Empfang von EMMs mit ORF Karte (K2XXXXXXXXXXXXX)
2
Antworten
18
Aufrufe
1K
Kind regards
W
gelöst OSCAM ORF Anfänger-Probleme
2
Antworten
24
Aufrufe
3K
tom00tom
gelöst RPI 3 Debian12 64, IPC - Fehler bei "o compile"
Antworten
10
Aufrufe
391
Derek Buegel
H
ORF P410 mit Canal + Buchung
2
Antworten
26
Aufrufe
1K
ohmza
O
Menü
Anmelden
Registrieren
Für die Nutzung dieser Website sind Cookies erforderlich. Du musst diese akzeptieren, um die Website weiter nutzen zu können. Erfahre mehr…