dirtyharry123
Freak
- Registriert
- 31. Juli 2012
- Beiträge
- 230
- Reaktionspunkte
- 129
- Punkte
- 103
AW: Ich habe meins geschrottet!!
You will have to use the Siemens cable as the other one probably uses RS232 and not TTL-Levels.
You can get the pinout for your connector here:
So you will need to find which cables go to pins 1,5 and 6.
In my case these were:
White = GND
Blue = TX
Green = RX
(Red = VCC 5V)
You might have to try and switch TX and RX if it doesn't work right away.
You will have to use the Siemens cable as the other one probably uses RS232 and not TTL-Levels.
You can get the pinout for your connector here:
Du musst dich
Anmelden
oder
Registrieren
um diesen link zusehen!
So you will need to find which cables go to pins 1,5 and 6.
In my case these were:
White = GND
Blue = TX
Green = RX
(Red = VCC 5V)
You might have to try and switch TX and RX if it doesn't work right away.