Howto: HD+ mit oscam

ALEX7786 · 8. Januar 2010

AW: Howto: HD+ mit oscam

da scheint der Hund begraben zu liegen:

root@dm800:/usr/bin# ./oscam_0.99.4
Warning: keyword 'level' in global section not recognized
2010/01/08 22:47:17 1652 s >> OSCam << cardserver started version 0.99.4svn, build #1059 (mips-tuxbox-linux)
2010/01/08 22:47:17 1652 s auth size=4740
2010/01/08 22:47:17 1652 s Cannot open file "/var/tuxbox/config/oscam.services" (errno=2)
2010/01/08 22:47:17 1652 s userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired
2010/01/08 22:47:17 1652 s signal handling initialized (type=sysv)
2010/01/08 22:47:17 1652 s can't open file "/var/tuxbox/config/oscam.srvid" (err=2), no service-id's loaded
2010/01/08 22:47:17 1652 s monitor: disabled
2010/01/08 22:47:17 1652 s camd 3.3x: disabled
2010/01/08 22:47:17 1652 s camd 3.5x: disabled
2010/01/08 22:47:17 1652 s cs378x: disabled
2010/01/08 22:47:17 1652 s newcamd: initialized (fd=6, port=34000, crypted)
2010/01/08 22:47:17 1652 s CAID: 1830
2010/01/08 22:47:17 1652 s provid #0: 003411
2010/01/08 22:47:17 1652 s radegast: disabled
2010/01/08 22:47:17 1652 s resolver thread started
2010/01/08 22:47:17 1652 s logger started (pid=1654)
2010/01/08 22:47:17 1652 s resolver started (pid=1655, delay=30 sec)
2010/01/08 22:47:17 1652 s reader started (pid=1656, device=/dev/sci0)
2010/01/08 22:47:17 1652 s Waiting for local card init ....
2010/01/08 22:47:17 1656 r02 card detected
2010/01/08 22:47:20 1656 r02 ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 34 63
2010/01/08 22:47:21 1656 r02 -----------------------------------------
2010/01/08 22:47:21 1656 r02 |id |tier |valid from |valid to |
2010/01/08 22:47:21 1656 r02 +----+--------+------------+------------+
2010/01/08 22:47:21 1656 r02 |8011|0064 |2010/01/08 |2011/01/09 |
2010/01/08 22:47:21 1656 r02 |8011|0065 |1992/01/01 |1993/01/01 |
2010/01/08 22:47:21 1656 r02 -----------------------------------------
2010/01/08 22:47:22 1656 r02 ROM: D N A S P 1 4 2
2010/01/08 22:47:22 1656 r02 REV: R e v G C 4
2010/01/08 22:47:22 1656 r02 SER: 48 BF 0E E5
2010/01/08 22:47:22 1656 r02 CAID: 1830
2010/01/08 22:47:22 1656 r02 Prv.ID: 00 00 34 11 (sysid)
2010/01/08 22:47:22 1656 r02 Prv.ID: 00 00 80 11
2010/01/08 22:47:22 1656 r02 ready for requests
2010/01/08 22:47:22 1652 s Init for all local cards done !
2010/01/08 22:47:22 1652 s anti cascading disabled
2010/01/08 22:47:24 1652 s cardserver down

datamen · 8. Januar 2010

AW: Howto: HD+ mit oscam

versuch es mal mit der oscam-version.

einfach austauschen/überschreiben (alte evtl. auf dem pc sichern) und rechte auf 755 setzen. oscam vorher natürlich beenden

ALEX7786 · 8. Januar 2010

AW: Howto: HD+ mit oscam

läuft leider auch nicht:

root@dm800:/usr/bin# ./oscam_0.99.4
Warning: keyword 'level' in global section not recognized
2010/01/08 23:33:12 1872 s >> OSCam << cardserver started version 0.99.4svn, build #802 (mipsel-tuxbox-linux)
2010/01/08 23:33:12 1872 s auth size=4736
2010/01/08 23:33:12 1872 s Cannot open file "/var/tuxbox/config/oscam.services" (errno=2)
2010/01/08 23:33:12 1872 s userdb reloaded: 0 accounts freed, 1 accounts loaded
2010/01/08 23:33:12 1872 s signal handling initialized (type=sysv)
2010/01/08 23:33:12 1872 s can't open file "/var/tuxbox/config/oscam.srvid" (err=2), no service-id's loaded
2010/01/08 23:33:12 1872 s monitor: disabled
2010/01/08 23:33:12 1872 s camd 3.3x: disabled
2010/01/08 23:33:12 1872 s camd 3.5x: disabled
2010/01/08 23:33:12 1872 s cs378x: disabled
2010/01/08 23:33:12 1872 s newcamd: initialized (fd=6, port=34000, crypted)
2010/01/08 23:33:12 1872 s CAID: 1830
2010/01/08 23:33:12 1872 s provid #0: 003411
2010/01/08 23:33:12 1872 s radegast: disabled
2010/01/08 23:33:12 1872 s resolver thread started
2010/01/08 23:33:12 1872 s logger started (pid=1874)
2010/01/08 23:33:12 1872 s resolver started (pid=1875, delay=30 sec)
2010/01/08 23:33:12 1872 s reader started (pid=1876, device=/dev/sci0)
2010/01/08 23:33:12 1872 s Waiting for local card init ....
2010/01/08 23:33:12 1876 r02 card detected
2010/01/08 23:33:15 1876 r02 ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 34 63
2010/01/08 23:33:29 1876 r02 card system not supported
2010/01/08 23:33:29 1876 r02 card initializing error
2010/01/08 23:33:29 1872 s Init for all local cards done !
2010/01/08 23:33:29 1872 s anti cascading disabled
2010/01/08 23:33:29 1872 s client(1) connect from 127.0.0.1 (pid=1878, pipfd=12)
2010/01/08 23:33:29 1872 s client(2) connect from 127.0.0.1 (pid=1879, pipfd=13)
2010/01/08 23:33:29 1878 c01 Connection closed to client
2010/01/08 23:33:29 1879 c02 encrypted newcamd:34000-client 127.0.0.1 granted (user, au=hdplus)
2010/01/08 23:33:29 1879 c02 user user authenticated successfully (using client 4343)
2010/01/08 23:33:29 1879 c02 AU wont be used on this port -> disable AU
2010/01/08 23:34:55 1872 s cardserver down
root@dm800:/usr/bin# ./oscam_0.99.4
Warning: keyword 'level' in global section not recognized
2010/01/08 23:35:28 1886 s >> OSCam << cardserver started version 0.99.4svn, build #802 (mipsel-tuxbox-linux)
2010/01/08 23:35:28 1886 s auth size=4736
2010/01/08 23:35:28 1886 s Cannot open file "/var/tuxbox/config/oscam.services" (errno=2)
2010/01/08 23:35:28 1886 s userdb reloaded: 0 accounts freed, 1 accounts loaded
2010/01/08 23:35:29 1886 s signal handling initialized (type=sysv)
2010/01/08 23:35:29 1886 s can't open file "/var/tuxbox/config/oscam.srvid" (err=2), no service-id's loaded
2010/01/08 23:35:29 1886 s monitor: disabled
2010/01/08 23:35:29 1886 s camd 3.3x: disabled
2010/01/08 23:35:29 1886 s camd 3.5x: disabled
2010/01/08 23:35:29 1886 s cs378x: disabled
2010/01/08 23:35:29 1886 s newcamd: initialized (fd=6, port=34000, crypted)
2010/01/08 23:35:29 1886 s CAID: 1830
2010/01/08 23:35:29 1886 s provid #0: 003411
2010/01/08 23:35:29 1886 s radegast: disabled
2010/01/08 23:35:29 1886 s resolver thread started
2010/01/08 23:35:29 1886 s logger started (pid=1888)
2010/01/08 23:35:29 1886 s resolver started (pid=1889, delay=30 sec)
2010/01/08 23:35:29 1886 s reader started (pid=1890, device=/dev/sci0)
2010/01/08 23:35:29 1886 s Waiting for local card init ....
2010/01/08 23:35:29 1890 r02 card detected
2010/01/08 23:36:18 1890 r02 ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 34 63
2010/01/08 23:36:32 1890 r02 card system not supported
2010/01/08 23:36:32 1890 r02 card initializing error
2010/01/08 23:36:32 1886 s Init for all local cards done !
2010/01/08 23:36:32 1886 s anti cascading disabled
2010/01/08 23:36:32 1886 s client(1) connect from 127.0.0.1 (pid=1893, pipfd=12)
2010/01/08 23:36:32 1886 s client(2) connect from 127.0.0.1 (pid=1894, pipfd=13)
2010/01/08 23:36:32 1886 s client(3) connect from 127.0.0.1 (pid=1895, pipfd=14)
2010/01/08 23:36:32 1886 s client(4) connect from 127.0.0.1 (pid=1896, pipfd=15)
2010/01/08 23:36:32 1886 s client(5) connect from 127.0.0.1 (pid=1897, pipfd=16)
2010/01/08 23:36:32 1893 c01 Connection closed to client
2010/01/08 23:36:32 1894 c02 Connection closed to client
2010/01/08 23:36:32 1895 c03 Connection closed to client
2010/01/08 23:36:33 1896 c04 Connection closed to client
2010/01/08 23:36:33 1897 c05 encrypted newcamd:34000-client 127.0.0.1 granted (user, au=hdplus)
2010/01/08 23:36:33 1897 c05 user user authenticated successfully (using client 4343)
2010/01/08 23:36:33 1897 c05 AU wont be used on this port -> disable AU
2010/01/08 23:39:17 1897 c05 user (1830&003411/EF10/92:4C7A): rejected user ident (120 ms)
2010/01/08 23:39:25 1897 c05 user (1830&003411/EF10/92:BBC1): rejected user ident (121 ms)
2010/01/08 23:39:57 1886 s cardserver down

irgendetwas ist doch da komisch oder?

datamen · 8. Januar 2010

AW: Howto: HD+ mit oscam

ALEX7786 schrieb:
läuft leider auch nicht:

irgendetwas ist doch da komisch oder?

poste mal deine configs ohne RSA & BK.

ALEX7786 · 9. Januar 2010

AW: Howto: HD+ mit oscam

oscam.conf:

#
# main configuration
#

[global]

[global]
nice = -1
WaitForCards = 1
ClientTimeout = 5
LogFile = stdout
Level = 15
CacheDelay = 120

# monitor

#[monitor]
#port = 988
#aulow = 120
#monlevel = 1

# protocols
#[camd35]
#Port = 3333

[newcamd]
key = 0102030405060708091011121314
port = 34000@1830:003411

oscam.server:

[reader]
label = HDplus
Protocol = internal
detect = CD
device = /dev/sci0
group = 1
emmcache = 1,3,2
n3_rsakey = BF...
n3_boxkey = A7...
mhz = 368

oscam.user:

[account]
user = user
pwd = pass
group = 1
au = HDplus
CAID = 1830

kiliantv · 9. Januar 2010

AW: Howto: HD+ mit oscam

Aktuellere Version im 1. Post.

kiliantv · 9. Januar 2010

AW: Howto: HD+ mit oscam

@ALEX7786

oscam.conf:

######### oscam.conf ######

[global]
nice = -19
WaitForCards = 1
ClientTimeout = 5
LogFile = stdout
Level = 15
CacheDelay = 120

[newcamd]
key = 0102030405060708091011121314
port = 34000@1830:003411

oscam.server:

######### Oscam.server #########

[reader]
Label = hd+
protocol = internal
detect = CD
device = /dev/sci0
group = 1
CAID = 1830
EMMCache = 1,3,2
n3_rsakey =BF...D5
n3_boxkey = A7...7C

oscam.user:

######### Oscam.user ##########

[account]
user = hdplus
pwd = hdplus
group = 1
au = hd+
CAID = 1830

cccam.cfg:

N: 127.0.0.1 34000 hdplus hdplus 01 02 03 04 05 06 07 08 09 10 11 12 13 14

So ist meine Einstellung und geht 1A,

Bei dir wie ist der cccam.cfg Eintrag?

ALEX7786 · 9. Januar 2010

AW: Howto: HD+ mit oscam

der Eintrag ist

N: 127.0.0.1 34000 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 1

sollte also auch passen oder?

kiliantv · 9. Januar 2010

AW: Howto: HD+ mit oscam

ALEX7786 schrieb:
der Eintrag ist

sollte also auch passen oder?

kannst du auch so machen:

N: 127.0.0.1 34000 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

mit der 256 am Ende ist Sie dann Hop 0 bei dir Local. :whistle2:

HobbyWM · 9. Januar 2010

AW: Howto: HD+ mit oscam

Hi Leute habe es heute auch Probiert meine HD + Karte in meiner DM 800, aber keine Chance bleibt dunkel.

Hier der Log.

010/01/09 13:52:56 1407 s >> OSCam << cardserver started version 0.99.4svn
, build #680 (mips-tuxbox-linux)
2010/01/09 13:52:56 1407 s auth size=4736
2010/01/09 13:52:56 1407 s services reloaded: 0 services freed, 0 services l
oaded
2010/01/09 13:52:56 1407 s userdb reloaded: 0 accounts freed, 1 accounts loa
ded
2010/01/09 13:52:56 1407 s signal handling initialized (type=sysv)
2010/01/09 13:52:56 1407 s 2276 service-id's loaded
2010/01/09 13:52:56 1407 s 0 lengths for caid guessing loaded
2010/01/09 13:52:56 1407 s monitor: disabled
2010/01/09 13:52:56 1407 s camd 3.3x: disabled
2010/01/09 13:52:56 1407 s camd 3.5x: disabled
2010/01/09 13:52:56 1407 s cs378x: disabled
2010/01/09 13:52:56 1407 s newcamd: initialized (fd=6, port=10010, crypted)
2010/01/09 13:52:56 1407 s CAID: 1830
2010/01/09 13:52:56 1407 s provid #0: 003411
2010/01/09 13:52:56 1407 s radegast: disabled
2010/01/09 13:52:56 1407 s resolver thread started
2010/01/09 13:52:56 1407 s logger started (pid=1409)
2010/01/09 13:52:56 1407 s resolver started (pid=1410, delay=30 sec)
2010/01/09 13:52:56 1407 s reader started (pid=1411, device=/dev/sci0)
2010/01/09 13:52:56 1407 s Waiting for local card init ....
2010/01/09 13:52:56 1411 r02 card detected
2010/01/09 13:52:59 1411 r02 ATR: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
2010/01/09 13:53:01 1411 r02 [nagra-reader] Session Key: xxxxxxxxxxxxxxxxx
2010/01/09 13:53:01 1411 r02 ROM: D N A S P 1 4 2
2010/01/09 13:53:01 1411 r02 REV: R e v G C 4
2010/01/09 13:53:01 1411 r02 SER: xxxxxxxxxx
2010/01/09 13:53:01 1411 r02 CAID: 1830
2010/01/09 13:53:01 1411 r02 ready for requests
2010/01/09 13:53:01 1407 s Init for all local cards done !
2010/01/09 13:53:01 1407 s anti cascading disabled
2010/01/09 13:53:01 1407 s client(1) connect from 127.0.0.1 (pid=1412, pipfd
=12)
2010/01/09 13:53:01 1412 c01 encrypted newcamd:10010-client 127.0.0.1 granted
(user, au=hdplus)
2010/01/09 13:53:01 1412 c01 user user authenticated successfully (using clien
t 4343)
2010/01/09 13:53:01 1412 c01 AU flag 0 for user user
2010/01/09 13:53:05 1412 c01 user (1830&003411/EF11/92:CFD3): not found (252 m
s)
2010/01/09 13:53:12 1412 c01 user (1830&003411/EF11/92:79D3): not found (251 m
s)
2010/01/09 13:53:19 1412 c01 user (1830&003411/EF11/92:B82D): not found (250 m
s)
2010/01/09 13:53:26 1412 c01 user (1830&003411/EF11/92:9222): not found (250 m
s)
2010/01/09 13:53:33 1412 c01 user (1830&003411/EF11/92:410B): not found (251 m
s)
2010/01/09 13:53:40 1412 c01 user (1830&003411/EF11/92:181E): not found (250 m
s)
2010/01/09 13:53:47 1412 c01 user (1830&003411/EF11/92:7B45): not found (251 m
s)
2010/01/09 13:53:54 1412 c01 user (1830&003411/EF11/92:F25B): not found (251 m
s)
2010/01/09 13:54:01 1412 c01 user (1830&003411/EF11/92:F52D): not found (251 m
s)
2010/01/09 13:54:08 1412 c01 user (1830&003411/EF11/92:1442): not found (251 m
s)
2010/01/09 13:54:15 1412 c01 user (1830&003411/EF11/92:1BA3): not found (251 m
s)
2010/01/09 13:54:22 1412 c01 user (1830&003411/EF11/92:6650): not found (251 m
s)
2010/01/09 13:54:29 1412 c01 user (1830&003411/EF11/92:57E3): not found (250 m
s)
2010/01/09 13:54:36 1412 c01 user (1830&003411/EF11/92:33EC): not found (251 m
s)
2010/01/09 13:54:43 1412 c01 user (1830&003411/EF11/92:5306): not found (251 m
s)
2010/01/09 13:54:50 1412 c01 user (1830&003411/EF11/92:136C): not found (251 m
s)
2010/01/09 13:54:55 1407 s cardserver down

Olaf010101 · 9. Januar 2010

AW: Howto: HD+ mit oscam

karte iss bei dir schon aktiviert?
aus dem log sieht man das es grundsätzlich erstmal passt soweit!
bei der ecm-abfrage allerdings stimmt was nicht!(not found)

HobbyWM · 9. Januar 2010

AW: Howto: HD+ mit oscam

Also hier die config´s

oscam.user

[account]
user = user
pwd = pass
group = 1
au = HDplus
CAID = 1830

oscam.server

[reader]
label = HDplus
Protocol = internal
detect = CD
device = /dev/sci0
group = 1
emmcache = 1,3,2
n3_rsakey = BFxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxD5
n3_boxkey = AxxxxxxxxxxxxxxxxxxxC
mhz = 368

oscam.conf

#
# main configuration
#

[global]

[global]
nice = -1
WaitForCards = 1
ClientTimeout = 5
LogFile = stdout
Level = 15
CacheDelay = 120

# monitor

#[monitor]
#port = 988
#aulow = 120
#monlevel = 1

# protocols
#[camd35]
#Port = 3333

[newcamd]
key = 0102030405060708091011121314
port = 10010@1830:003411

HobbyWM · 9. Januar 2010

AW: Howto: HD+ mit oscam

Es geht, habe die Karte zuerst mit scam Aktivieren müssen.

Danke für eure Hilfe

ALEX7786 · 9. Januar 2010

AW: Howto: HD+ mit oscam

kiliantv schrieb:
kannst du auch so machen:

mit der 256 am Ende ist Sie dann Hop 0 bei dir Local. :whistle2:

bringt leider auch keine Änderung

tyrotronic · 10. Januar 2010

AW: Howto: HD+ mit oscam

habe eine dream 8000 und wollte HD+im ersten schacht und Kasbelbw im zweiten schacht laufen lassen die hd + karte geht doch die kabelbw nur über ccam wie muss ich da die config anpassen ??

Howto: HD+ mit oscam

ALEX7786

Newbie

datamen

Board Legende

ALEX7786

Newbie

datamen

Board Legende

ALEX7786

Newbie

kiliantv

kiliantv

ALEX7786

Newbie

kiliantv

HobbyWM

Ist gelegentlich hier

Olaf010101

DEB Inventar

HobbyWM

Ist gelegentlich hier

HobbyWM

Ist gelegentlich hier

ALEX7786

Newbie

tyrotronic

Hacker

Ähnliche Themen

Howto: HD+ mit oscam

Newbie

Board Legende

Newbie

Board Legende

Newbie

Newbie

Ist gelegentlich hier

DEB Inventar

Ist gelegentlich hier

Ist gelegentlich hier

Newbie

Hacker

Ähnliche Themen

Datenschutz & Transparenz

Datenschutz & Transparenz