hd+ schwarze Karte Smartreader 2 Oscam erkennt karte nicht Ubuntu

champer123 · 22. Mai 2012

Hallo zusammen ,

habe folgendes Problem. Habe soweit meinen Server schon aufgebaut auf Ubuntu/linux Basis.

CCcam auch installiert und Oscam, da ich eine Hd+ karte sharen möchte.

so nun zu meinem Problem :

Wenn ich Oscam starte kommt folgende Log File und meine HD+ karte wird nicht erkannt. Woran liegt das ? Bitte um Feedback

Code:

12:37:26        0 s starting thread log_list_thread
12:37:26        0 s log_list_thread thread started
12:37:26        0 s >> OSCam <<  cardserver started, version 1.20-unstable_svn, build #6359 (-pc-linux)
12:37:26        0 s version=1.20-unstable_svn, build #6359, system=-pc-linux, nice=-1
12:37:26        0 s client max. idle=120 sec, debug level=0
12:37:26        0 s max. logsize=128 Kb, loghistorysize=4096 bytes
12:37:26        0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
12:37:26        0 s services reloaded: 0 services freed, 3 services loaded, rejected 0
12:37:26        0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
12:37:26        0 s signal handling initialized (type=sysv)
12:37:26        0 s 187 service-id's loaded in 1ms
12:37:26        0 s can't open file "/usr/local/etc/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
12:37:26        0 s can't open file "/usr/local/etc/oscam.provid" (err=2 No such file or directory), no provids's loaded
12:37:26        0 s can't open file "/usr/local/etc/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
12:37:26        0 s can't open whitelist file /usr/local/etc/oscam.whitelist
12:37:26        0 s can't open cacheex-matcher file /usr/local/etc/oscam.cacheex
12:37:26        0 s Starting listener 0
12:37:26        0 s monitor: initialized (fd=4, port=988)
12:37:26        0 s Starting listener 0
12:37:26        0 s camd35: disabled
12:37:26        0 s Starting listener 0
12:37:26        0 s cs378x: disabled
12:37:26        0 s Starting listener 0
12:37:26        0 s newcamd: initialized (fd=5, port=34000, crypted)
12:37:26        0 s -> CAID: 1830 PROVID: 003411
12:37:26        0 s Starting listener 0
12:37:26        0 s pandora: disabled
12:37:26        0 s Starting listener 0
12:37:26        0 s csp: disabled
12:37:26        0 s Starting listener 0
12:37:26        0 s radegast: disabled
12:37:26        0 s starting thread http
12:37:26        0 s http thread started
12:37:26        0 s starting thread reader check
12:37:26        0 s reader check thread started
12:37:26        0 s starting thread check
12:37:26        0 s check thread started
12:37:26        0 s creating thread for device /dev/ttyUSB0
12:37:26        0 s loadbalancer: can't read from file /tmp/.oscam/stat
12:37:26        0 s waiting for local card init
12:37:26  96A2068 h HTTP Server listening on port 1830
12:37:29  96971E0 r reader hdplus initialized (device=/dev/ttyUSB0, detect=cd, mhz=368, cardmhz=357)
12:37:29  96971E0 r hdplus card detected
12:37:34  96971E0 r ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
12:37:35  96971E0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz
12:37:36  96971E0 r detect native nagra card
12:37:37  96971E0 r [nagra-reader] type: NAGRA, caid: 1843, IRD ID: FF FF FF FF
12:37:37  96971E0 r [nagra-reader] ProviderID: 00 00 34 11
12:37:37  96971E0 r [nagra-reader] active to: 2012/07/13 12:59
12:37:37  96971E0 r -----------------------------------------
12:37:37  96971E0 r |id  |tier    |valid from  |valid to    |
12:37:37  96971E0 r +----+--------+------------+------------+
12:37:37  96971E0 r |8011|0066    |2012/05/21  |2013/05/22  |
12:37:37  96971E0 r |8011|0067    |2010/01/19  |2010/01/20  |
12:37:37  96971E0 r -----------------------------------------
12:37:42  96971E0 r card system not supported
12:37:42  96971E0 r Normal mode failed, reverting to Deprecated Mode
12:37:46  96971E0 r ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
12:37:47  96971E0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz
12:37:50  96971E0 r detect native nagra card
12:37:59  96971E0 r card system not supported
12:37:59  96971E0 r card initializing error
12:38:00        0 s init for all local cards done
12:38:00        0 s anti cascading disabled

Oscam.Conf

[global]
MaxLogSize = 128
WaitForCards = 1
nice = -1
serverip = 192.xxx.xxx.53
usrfile = /var/log/oscamuser.log
logfile = /var/log/oscam.log

[cccam]
port = 14000
reshare = 1
ignorereshare = 0
version = 2.2.1
reshare_mode = 0

# protocols
#[camd35]
#Port = 3333

[monitor]
port = 988
nocrypt = 192.168.0.1-192.168.0.255
aulow = 120
hideclient_to = 0
monlevel = 4
appendchaninfo = 1

[newcamd]
port = 34000@1830:003411
key = 0102030405060708091011121314
serverip = 192.xxx.xxx.53
allowed =
keepalive = 1

[webif]
httpport = 1830
httpuser = oscam
httppwd = oscam
httpcss =
httptpl =
httpscript =
httprefresh = 0
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
httpdyndns =
httphideidleclients = 0
httpreadonly = 0

Oscam.server

[reader]
label = hdplus
enable = 1
protocol = mouse
device = /dev/ttyUSB0
caid = 1843
rsakey = BF35xxxxxxxA4DD5
boxkey = A76xxxxxxx37C
services = hdplus
detect = cd
mhz = 368
cardmhz = 357
group = 1
emmcache = 1,3,2
lb_weight = 100

oscam.usr

[account]
user = xxxx
pwd = xxxx
disabled = 0
expdate =
group = 1
hostname = localhost
uniq = 0
sleep = 0
monlevel = 2
au = 1
Services = hdplus
caid = 1702&FFFF,1833&FFFF,1830&FFFF
betatunnel = 1833.FFFF:1702
ident =
keepalive = 1
numusers = 0
penalty = 0

laila-no1 · 22. Mai 2012

hi,

hier mein Reader der funktioniert.
Oscamversion 1.20-unstable_svn build #6680

PHP:

[reader]
label                         = hd+-black
description                   = Lokaler-Reader
protocol                      = mouse
device                        = /dev/R
caid                          = 1843
rsakey                        = BF358XXXXXXXXXXXXXXXXXCA4DD5
boxkey                        = AXXXXXXXXXXXXXXXXC
detect                        = cd
mhz                           = 368
cardmhz                       = 368 #ist bei dir anders, mal abändern
ident                         = 1843:000000,003411,008011 #fehlt bei dir komplett, hinzufügen!
group                         = 3 #ändern auf deine Wunschgruppe
emmcache                      = 1,1,2
blockemm-unknown              = 1

Teste mal diese Einstellungen.

*Neptun* · 22. Mai 2012

Was hast Du für ein Reader? Smartreader2? Easymouse oder Smargo?

laila-no1 · 22. Mai 2012

sorry hab ich vergessen und bei dir falsch gelesen, dachte du hast auch easymouse 2!

ich habe nur Easymouse 2 Premium USB am laufen.

Sie müssen registriert sein, um Links zu sehen.

Narf · 22. Mai 2012

In den Oscam Bereich verschoben....

ersin328 · 22. Mai 2012

hi wie wehrs mit info

emu oscam only ??

Oder Cccam only als emu ??

Hast du noch ein karte S02 ??

HD+ caid ist 1843 und nicht 1830 .
[newcamd]
port = 34000@1830:003411 ?????
key = 0102030405060708091011121314
serverip = 192.xxx.xxx.53
allowed =
keepalive = 1

Gruß
ersin328

laila-no1 · 22. Mai 2012

er hat doch 1843 in seinem Reader!

ahh..beim User ist die 1830 drinn stimmt.:emoticon-0184-tmi:

ersin328 · 22. Mai 2012

Klar aber nicht im newcamd !!!!!!!!!!!!!!!!!!!!!!!!!!!

oscam user auch noch sehe ich gerade !!!!!!!!!!!!!!!!!!!

HD+ caid 1843 SCHWARZ ok

und gebe mal info was du als emu nemen wilst oscam only ?

champer123 · 22. Mai 2012

Ja Oscam Emu mit CCcam weil ich am PC über DVB viewer schauen will ... Hadu oder Acamd, die ünterstützen glaub ich nur CCam oder ?

habe jetzt aber noch necamd drin weil ich gelesen habe, das der Stabil sein soll... Eure Empfehlung wäre gut

Habe keine S02 Karte wollte mir aber eine zulegen ... Aber zunächst erstmal nur HD+ HD02 ... will es erstmal damit zum laufen bringen

Der Reader ist ne Easymouse 2 mit umschalter auf Smartmouse und Phönix ... bisschen verwecheselt alles

neue Config habe ich gemacht die funktioniert nur komme ich nicht weiter ... hier meine neue Config inkl. Log ...(14:21:30 0 s anti cascading disabled, ab da macht der nicht weiter)

Code:

14:21:18        0 s starting thread log_list_thread
14:21:18        0 s log_list_thread thread started
14:21:18        0 s >> OSCam <<  cardserver started, version 1.20-unstable_svn, build #6359 (-pc-linux)
14:21:18        0 s version=1.20-unstable_svn, build #6359, system=-pc-linux, nice=-1
14:21:18        0 s client max. idle=120 sec, debug level=0
14:21:18        0 s max. logsize=256 Kb, loghistorysize=4096 bytes
14:21:18        0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
14:21:18        0 s services reloaded: 0 services freed, 3 services loaded, rejected 0
14:21:18        0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
14:21:18        0 s signal handling initialized (type=sysv)
14:21:18        0 s 187 service-id's loaded in 1ms
14:21:18        0 s can't open file "/usr/local/etc/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
14:21:18        0 s can't open file "/usr/local/etc/oscam.provid" (err=2 No such file or directory), no provids's loaded
14:21:18        0 s can't open file "/usr/local/etc/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
14:21:18        0 s can't open whitelist file /usr/local/etc/oscam.whitelist
14:21:18        0 s can't open cacheex-matcher file /usr/local/etc/oscam.cacheex
14:21:18        0 s Starting listener 0
14:21:18        0 s monitor: disabled
14:21:18        0 s Starting listener 0
14:21:18        0 s camd35: disabled
14:21:18        0 s Starting listener 0
14:21:18        0 s cs378x: disabled
14:21:18        0 s Starting listener 0
14:21:18        0 s newcamd: initialized (fd=5, port=50002, crypted)
14:21:18        0 s -> CAID: 1843 PROVID: 000000, 003411, 008011
14:21:18        0 s Starting listener 1
14:21:18        0 s newcamd: initialized (fd=6, port=51000, crypted)
14:21:18        0 s -> CAID: 1843 PROVID: 000000, 003411, 008011
14:21:18        0 s Starting listener 0
14:21:18        0 s pandora: disabled
14:21:18        0 s Starting listener 0
14:21:18        0 s csp: disabled
14:21:18        0 s Starting listener 0
14:21:18        0 s radegast: disabled
14:21:18        0 s starting thread http
14:21:18        0 s http thread started
14:21:18        0 s starting thread reader check
14:21:18        0 s reader check thread started
14:21:18        0 s starting thread check
14:21:18        0 s check thread started
14:21:18        0 s creating thread for device /dev/ttyUSB0
14:21:18        0 s creating thread for device 192.168.178.53
14:21:18        0 s waiting for local card init
14:21:18  8C3AB90 p proxy 192.168.178.53:34000 newcamd525 (fd=0)
14:21:18  8C3AB90 p proxy newcamdremote1 initialized (server=192.168.178.53:34000)
14:21:18  8C4DCA8 h HTTP Server listening on port 3001
14:21:20  8C392D0 r reader hdplusschwarz initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=368)
14:21:21  8C392D0 r hdplusschwarz card detected
14:21:25  8C392D0 r ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
14:21:27  8C392D0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
14:21:28  8C392D0 r detect native nagra card
14:21:28  8C392D0 r [nagra-reader] type: NAGRA, caid: 1843, IRD ID: FF FF FF FF
14:21:28  8C392D0 r [nagra-reader] ProviderID: 00 00 34 11
14:21:28  8C392D0 r [nagra-reader] active to: 2012/07/13 12:59
14:21:29  8C392D0 r -----------------------------------------
14:21:29  8C392D0 r |id  |tier    |valid from  |valid to    |
14:21:29  8C392D0 r +----+--------+------------+------------+
14:21:29  8C392D0 r |8011|0066    |2012/05/21  |2013/05/22  |
14:21:29  8C392D0 r |8011|0067    |2010/01/19  |2010/01/20  |
14:21:29  8C392D0 r -----------------------------------------
14:21:29  8C392D0 r found cardsystem nagra
14:21:29  8C392D0 r ROM:    D N A S P 1 8 0
14:21:29  8C392D0 r REV:    M e r 0 0 0
14:21:29  8C392D0 r SER:    49 20 DF 18
14:21:29  8C392D0 r CAID:   1843
14:21:29  8C392D0 r Prv.ID: 00 00 34 11 (sysid)
14:21:29  8C392D0 r Prv.ID: 00 00 00 00
14:21:29  8C392D0 r Prv.ID: 00 00 80 11
14:21:29  8C392D0 r [nagra-reader] ready for requests
14:21:30        0 s init for all local cards done
14:21:30        0 s anti cascading disabled

da bleib der stehen ...

oscam.conf.

[global]
nice = -1
WaitForCards = 1
preferlocalcards = 1
lb_mode = 1
lb_save = 150
logfile = /tmp/oscam.log;stdout
maxlogsize = 256
Saveinithistory = 1

[webif]
HttpPort = 3001
HttpUser = xxx
HttpPWD = xxx
HttpRefresh = 10
HttpAllowed = 192.168.0.1-192.168.255.255
HttpReadOnly = 1

[newcamd]
Key = 0102030405060708091011121314
Keepalive = 1
Port = 50002@1843:000000,003411,008011;51000@1843:000000,003411,008011

oscam.server

[reader]
Label = HDplusSchwarz
Protocol = mouse
Device = /dev/ttyUSB0
cardmhz = 368
Detect = CD
Group = 3
CAID = 1843
rsakey = BF35xxxxxx5CCA4DD5
boxkey = A76xxxxxD37C
EMMCache = 1,1,2

[reader]
Label = NewcamdRemote1
Protocol = newcamd
Device = 192.xxx.xxx.53,34000
User = xxxx
Password = xxx
Key = 0102030405060708091011121314
Caid = 1843
Group = 8

oscam.usr

[account]
User = xxx
Pwd = xxx
AU = 1
Group = 3,8

laila-no1 · 22. Mai 2012

14:21:29 8C392D0 r [nagra-reader] ready for requests

müsste doch jetzt passen!

ist der Client zu Oscam verbunden?

champer123 · 22. Mai 2012

ja aber bei Putty kann ich dann keine Einträge mehr machen wenn der läuft ....

kein rootxxx : vorne mehr wo ich was eintragen kann (hoffe ich versteht was ich meine) Admin Root ist halt weg ... wenn ich Oscam starte .. das meinte ich vorhin ...

bis jetzt nur dunkel ... DVB viewer ... am laufen mit HADU oder Acamd .... folgende Config bei HADU :

Was kann ich löschen was brauche ich nicht usw ?

[General]
PluginActive=1
KeyPath2=
UseTransparency=1

[Options]
UsePSITables=1
SurveyPMT=1
UsePATforPMT=0
DontUpdViewer=0
MaxECMPIDs=0
MaxConnections=0
DisplayIPorURL=1
ECMTimeout=3
MaxCAIDLoops=4
DCWsOneServ=1
LogMessages=1
LogMessLevel=2
EMMAlone=0
EMMFaked=0
EMMLog=1
DispAllEMMs=0
CacheUse=1
CacheUpdate=1
ManualUse=0
Systray=0

[Specific]
DVBViewerAPI=0
DVBViewerAllAudio=1
DVBViewerCSAStat=0
DVBViewerRecServ=0
DVBViewerIdleServ=0
DVBViewerEncrServ=0

[Device]
MDRoot=0
DescrCommand=
XorEven=
XorOdd=
UseTT=0

;
; Syntax for a CCCam server
; -------------------------
;
; Server declaration (mandatory):
; [Serv_CCcam]
;
; Mandatory parameter for each CCCam server:
; Server=CCcam:192.xxx.xxx.53:14000:[EMM allowed]:xxxx:xxxx[:ClientNodeID]
;
; Sample for the 2 former lines:
; [Serv_MyServer]
; Server=CCCam:MyServer.com:12000:0:MyUsername:MyPassword
;
; Optional parameters for each CCCam server:
; Active= ; 0=No, or [1=Yes]
; Timeout= ; 0=None, or 3-7 seconds. Default is [5] seconds
; Version= ; [None], or Version:Build
; PadTime= ; [0=None], or (Timeout+2)-N seconds
; TimeRecon= ; [0=Automatic], or 1-32 seconds
; WantEmus= ; [0=No], or 1=Yes
; MaxHop= ; [0=None], or 1-N
; NonStd= ; [0=Auto], or 1=Yes, 2=No
; CAIDProv= ; [None], or 32 max entries of CAID/Providers
; NoCAIDProv= ; [None], or 32 max entries of CAID/Providers
; NoNodeCAID= ; [None], or 32 max entries of Node/CAIDs
; CAIDTunnel= ; [None], or 32 max entries of CAID/CAID/Provider/SIDs
; NoSID= ; [None], or 64 max entries of SIDs
; PrioGenRules= ; 1 or several general rules for priority. Default is [Hop]
; PrioCAIDProv= ; [None], or 32 max entries of CAID/Providers for priority
; IgnoreProvFor= ; [None], or 32 max entries of CAID
; DontUseProvFor=; [None], or 32 max entries of CAID
; EMMCAID= ; [None], or 2 max entries of CAID/Provider/Options/PID for EMMs
; UseNodeSID= ; 0=No, or [1=Yes]
; OSCAMWa= ; [0=No], or 1=Yes
; OSCAMPartner= ; [0=Auto Test], 1=Force Test OK, or 2=No
; OSCAMExt= ; [0=No], or 1=Yes
; OSCAMSID= ; 0=No, or [1=Yes]
;

Acamd Config

#
# Comment lines can start with # or ;
#
# every client line starts with the client name, followed by some arguments:
# 'hostname' is the name of the server
# 'port' is the port on the server
# 'emm' is a flag to allow EMM transfers to the server
# (0=disabled 1=enabled)
# 'caid' (optional) caid on which this client should work
# 'mask' (optional) mask for caid e.g. caid=1700 mask=FF00 would allow
# anything between 1700 & 17FF.
# Default is 1700 & FF00. If only caid is given mask is FFFF.
# You may give multiple caid/mask values comma separated
# (e.g. 1702,1722,0d0c/ff00).
# 'username' is the login username
# 'password' is the login password
#
# newcamd client
# 'cfgkey' is the config key (28bytes)
#
# newcamd client
# 'providerid(s)' add provider id's for filtering 0000006A,0000006D
#
# radegast client
# No EMM support
#
# gbox client
# UDP localhost only, default ports, No EMM support
#
# gboxn client
# servername, serverport, emm, [caid/mask], serverpassword, pcname, pcport, pcpassword, free text
#
# camd35 client
# UDP protocol
#
#radegast:192.168.7.54:10001:0/0000/0000
#gbox:0.0.0.0:0:0/0000/0000
#camd35:192.xxx.xxxx.53:34000:1/0000/0000:xxxx:xxx
#newcamd:192.xxxx.xxx.54:34000:1/0000/0000:xxx:xxxx:0102030405060708091011121314
#newcamd:192.168.7.54:34001:1/0100/ff00:username

assword:0102030405060708091011121314:0000006A
#emubox03:192.168.7.54:10000:0/0000/0000
#gboxn:192.168.7.54:6600:0/0000/0000:AA34BB78:192.168.7.53:6601:AA34BB71:Server 1
#cccamn:Server=CCcam:192.xxx.xxx.53:14000:0/0000/0000:xxxx:xxx

ersin328 · 22. Mai 2012

bei oscam user noch caid einfügen

CAID = 1843

Gruß
ersin328

*Neptun* · 22. Mai 2012

Ihr pullt hier überall rum, er sollte erstmal den Reader richtig konfigurieren und die Karte sollte mit Oscam da sein, dann kann er weitermachen ob über CCcam oder Camd3, Newcam - Protokoll, aber die Karte ist nicht da, warum wieso k.A machmal einfache Konfiguration!!!

[reader]
protocol = mouse
device = /dev/xxx # anpassen
caid = 1843
rsakey = BF35xxxDD5
boxkey = A7xxx7C
detect = cd
mhz = 357
cardmhz = 357
group = 1 #anpassen
emmcache = 1,3,2
blockemm-unknown = 1

ersin328 · 22. Mai 2012

klar hast du recht da für brauch er im oscam user caid 1843 eintrag .

die HD+ karte ist aktiviert ?????

[h=2][/h]

Ja Oscam Emu mit CCcam??????
ALSO N: Line hast du auch ins cccam;cfg eingefügt ?????

Gruß
ersin328

champer123 · 25. Mai 2012

Sorry wegen meiner Abwesendheit ... viel Stress...

HD+ Karte wurde aktiviert ....

CCcam Config sieht so aus mit N-Line :

SERVER LISTEN PORT : 14000

ALLOW TELNETINFO: yes
TELNETINFO LISTEN PORT : 16000

#Für C-Line:
C: 192.xxx.xxx.53 14000 xxxx xxxx no
#Für N-Line:
N: 127.0.0.1 34000 xxxx xxxx 01 02 03 04 05 06 07 08 09 10 11 12 13 14

Muss das "no" hinter die C-Line ?
C-Line ist doch die, die zum Client verbindet oder ? also Clienten greifen auf die C-line zu ?

N-Line ist für die Oscam weiterleitung zuständig ne?

Suche

Suche

hd+ schwarze Karte Smartreader 2 Oscam erkennt karte nicht Ubuntu

champer123

Newbie

laila-no1

Neptun

Meister

laila-no1

Narf

ersin328

Board Guru

laila-no1

ersin328

Board Guru

champer123

Newbie

laila-no1

champer123

Newbie

ersin328

Board Guru

Neptun

Meister

ersin328

Board Guru

champer123

Newbie

Ähnliche Themen

Spenden Unterstützung