AW: HD+ mit Fritzbox 7170 und Kathrein UFS910 wird nicht hell
So, ich habe ein "CARDOK".:emoticon-0157-sun:
Ich habe nochmals folgendes Image aufgespielt:
onestep.cc_7170_04.80freetz-devel-6479M.de_20110129-023130.image
onestep.cc_7170_04.80freetz-devel-6479M.de_20110129-023130.external
Mit dieser Einstellung an der
Smartmouse::emoticon-0157-sun:
5V
Phoenix
Y1
3,57mhz
habe ich folgenden Log:
OSCAM 0.99.4svn build #2900STATUS CONFIGURATION READERS USERS SERVICES FILES SCRIPT SHUTDOWN
hide PID Type ID Label AU Crypted Address Port Protocol Login Date Login Time Online CAID:SRVID Current Channel LB Value/ Reader Idle Status
1092 s 0 root 0 0 127.0.0.1 0 server 01.03.11 21:42:05 00:12:12 0000:0000 00:12:12 OK
1093 l 0 root 0 0 127.0.0.1 0 logger 01.03.11 21:42:05 00:12:12 0000:0000 00:12:12 OK
1096 h 1 root 0 0 127.0.0.1 0 monitor 01.03.11 21:42:05 00:12:12 0000:0000 00:00:00 OK
1097 r 2
hdplus -1 0 127.0.0.1 0 mouse 01.03.11 21:42:05 00:12:12 0000:0000 00:11:59 CARDOK:emoticon-0169-dance
2011/03/01 21:42:05 1092 s logger started (pid=1093)
2011/03/01 21:42:05 1092 s Resolver thread started
2011/03/01 21:42:05 1092 s http started (pid=1096)
2011/03/01 21:42:05 1092 s reader started (pid=1097, device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=368)
2011/03/01 21:42:05 1092 s waiting for local card init
2011/03/01 21:42:05 1096 h HTTP Server listening on port 8181
2011/03/01 21:42:08 1097 r02 card detected
2011/03/01 21:42:13 1097 r02 ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 34 63
2011/03/01 21:42:15 1097 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2011/03/01 21:42:16 1097 r02 detect native nagra card
2011/03/01 21:42:17 1097 r02 -----------------------------------------
2011/03/01 21:42:17 1097 r02 |id |tier |valid from |valid to |
2011/03/01 21:42:17 1097 r02 +----+--------+------------+------------+
2011/03/01 21:42:17 1097 r02 |8011|0064 |2011/02/26 |2012/02/27 |
2011/03/01 21:42:17 1097 r02 |8011|0065 |1992/01/01 |1993/01/01 |
2011/03/01 21:42:17 1097 r02 -----------------------------------------
2011/03/01 21:42:18 1097 r02 ROM: D N A S P 1 4 2
2011/03/01 21:42:18 1097 r02 REV: R e v G C 4
2011/03/01 21:42:18 1097 r02 SER: 48 C2 52 7B
2011/03/01 21:42:18 1097 r02 CAID: 1830
2011/03/01 21:42:18 1097 r02 Prv.ID: 00 00 34 11 (sysid)
2011/03/01 21:42:18 1097 r02 Prv.ID: 00 00 00 00
2011/03/01 21:42:18 1097 r02 Prv.ID: 00 00 80 11
2011/03/01 21:42:18 1097 r02 [nagra-reader] ready for requests
2011/03/01 21:42:18 1092 s init for all local cards done
2011/03/01 21:42:18 1092 s anti cascading disabled
2011/03/01 21:42:18 1092 s dvbapi: dvbapi disabled
Im Kathrein habe ich folgende 2 Varianten in der newcamd.list (Orner keys) probiert, leider ohne Erfolg:
CWS = 127.0.0.1 15001 xxxx yyyy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan oscam
CWS = 192.168.178.3 15001 xxxx yyyy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan oscam
Hier die mg_cfg:
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 00 }
# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 01 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 01 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30
# network ecm timeout in seconds
K: { 05 }
# newcamd dead routes connect retry, sec
Q: { 600 }
# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 02 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 01 } root newcs
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 8080
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 02 } 127.0.0.1 28007 /tmp/mgcamd.log
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E
time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }
# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-******
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 11 }
# map all 180x nagra caids to 1801
# default is 01
F: { 00 }
