Knilchhhausen
Ist oft hier
- Registriert
- 21. Juni 2013
- Beiträge
- 136
- Reaktionspunkte
- 12
- Punkte
- 265
Hallo bekomme meine FunCard 4 einfach nicht ans laufen. Habe schon Googel und die Forumssuche gequält aber ich bekomme es einfach nicht hin.
Hier mal die Einstellungen:
Bitte also um Hilfe. Danke und Gruß der Knilch
Hier mal die Einstellungen:
[reader]label = ORF
enable = 1
protocol = mouse
device = /dev/ttyUSB1
services = orf
caid = 0D05
ecmwhitelist = 0D05:9C
detect = cd
nagra_read = 0
mhz = 357
cardmhz = 357
ident = 0D05:000004,000010
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
lb_weight = 100
dropbadcws = 1
audisabled = 1
enable = 1
protocol = mouse
device = /dev/ttyUSB1
services = orf
caid = 0D05
ecmwhitelist = 0D05:9C
detect = cd
nagra_read = 0
mhz = 357
cardmhz = 357
ident = 0D05:000004,000010
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
lb_weight = 100
dropbadcws = 1
audisabled = 1
ORF [mouse] creating thread for device /dev/ttyUSB1ORF [mouse] Reader initialized (device=/dev/ttyUSB1, detect=cd, mhz=357, cardmhz=357)
ORF [mouse] card detected
ORF [mouse] ATR: 3B 24 00 30 42 30 30
ORF [mouse] Init card protocol T0, FI=1, F=372, D=1, N=0
ORF [mouse] Setting baudrate to 9600 bps
ORF [mouse] Calculated work ETU is 104.20 us
ORF [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
ORF [mouse] card system not supported
ORF [mouse] Normal mode failed, reverting to Deprecated Mode
ORF [mouse] ATR: 3B 24 00 30 42 30 30
ORF [mouse] Init card protocol T0, FI=1, F=372, D=1, N=0
ORF [mouse] Calculated work ETU is 104.20 us
ORF [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
ORF [mouse] card system not supported
ORF [mouse] card initializing error
ORF [mouse] card detected
ORF [mouse] ATR: 3B 24 00 30 42 30 30
ORF [mouse] Init card protocol T0, FI=1, F=372, D=1, N=0
ORF [mouse] Setting baudrate to 9600 bps
ORF [mouse] Calculated work ETU is 104.20 us
ORF [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
ORF [mouse] card system not supported
ORF [mouse] Normal mode failed, reverting to Deprecated Mode
ORF [mouse] ATR: 3B 24 00 30 42 30 30
ORF [mouse] Init card protocol T0, FI=1, F=372, D=1, N=0
ORF [mouse] Calculated work ETU is 104.20 us
ORF [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
ORF [mouse] card system not supported
ORF [mouse] card initializing error
Bitte also um Hilfe. Danke und Gruß der Knilch