AW: Finde Festplatteneinstellung nicht?! Hilfe!!
Hallo! Das Menü habe ich jetzt gefunden und ich bin einen Schritt weiter, aber jetzt habe ich das nächste Problem: Das Initialisieren funktioniert nicht. Die Festplatte wird gefunden, ich kann die Größe sehen, die Geschwindigkeit testen und auch ich von meinem MacBook über das FTP-Programm zugreife kann ich die Festplatte mit dem Verzeichnis sehen - wenn ich auf initialisieren gehe kommt folgender Bericht:
sfdisk ERROR: Sector 0 does not have an msdos signature /dev/sda: unrecognized partition table type
Old situatiuon: No partitions foubd
New situation: Units=cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0
Device Boot Start End #cyls #blocks Id System
/dev/sda1 0+ 60800 60801- 488384032 83 Linux
/dev/sda2 0 - 0 0 0 Empty
Warning: no primary partition is marked bootable (Active). This does not matter for LILO, but the DOS MBR Will nor boot this disk.
Successfully wrote the new partition table
Re-reading the partition table....
If you created or change a DOS partition, /dev/foo7, say, then use dd(1)
to
zero the first 512 bytes: dd if=dev/
zero of=/dev/foo7 bs=512 count=1
(see fdisk(8).)
mke2fs 1.41.9 (22-Aug-2009)
Ausführung beendet!
Trotzdem geht weder Time-Shift noch Aufnahmen! Warum??
:emoticon-0179-headb