EMMs kommen nur bei Freischaltung

[webman2]

AW: EMMs kommen nur bei Freischaltung

Löschen - so wie Du den gepostet hast, ist er -abhängig von der Oscam Version- falsch.

 

[bahner]

AW: EMMs kommen nur bei Freischaltung

werden aber dann die emms trotzdem noch dorthin geschrieben,
oder?


gruß bahner

 

[salidos]

AW: EMMs kommen nur bei Freischaltung

Wenn die Zeile weg ist liegen die emms im config Ordner.

 

[webman2]

AW: EMMs kommen nur bei Freischaltung

Die landen in dem Verzeichnis, wo die Oscam Dateien sind.
Manchmal werden mit dem Eintrag emmlogdir gar keine EMM geschrieben.

 

[bahner]

AW: EMMs kommen nur bei Freischaltung

mir ist leider ein Fehler passiert,
als ich die config gepostet hab,
richtig ist:

Spoiler

[global]
logfile = /var/log/oscam.log
maxlogsize = 1000
emmlogdir = /var/log/emm

[cache]
delay = 120

[newcamd]
port = 26265@1830:000000;26566@098C:000000;26575@0500:043800
allowed = 0.0.0.0-255.255.255.255
key = 0102030405060708091011121314

[cccam]
port = 26567
nodeid = BCDD46FB10661584

[monitor]
nocrypt = 192.168.0.0-192.168.255.255
aulow = 120
hideclient_to = 30

[webif]
httpport = 26500
httpuser = xxxx
httppwd = xxxx
httpcss = /var/config/blackstyle.css
httprefresh = 7
httphideidleclients = 1
httpallowed = 0.0.0.0-255.255.255.255
httpdyndns = xxxx
aulow = 120
hideclient_to = 30

[reader]
label = v14
protocol = mouse
device = /dev/v14
caid = 098C
ins7e11 = 15
detect = cd
mhz = 600
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1

x
[account]
user = neo
pwd = neo
au = v14,hd+,red
group = 1,2,3,4

es ist die docam 24b im Einsatz.
emmcache 1,1,2 hab ich bereits geändert.

muß hier trotzdem der eintrag
emmlogdir = /var/log/emm
raus?

gruß bahner

 

[Bulldog3001]

AW: EMMs kommen nur bei Freischaltung

emmlogdir =

das ist der default Pfad wo auch die configs liegen

 

[webman2]

AW: EMMs kommen nur bei Freischaltung

@bahner: Wir haben nicht geschrieben, dass deine Zeile grundsätzlich falsch ist.
Das hängt immer von Randbedingungen ab - ohne die Zeile geht ES ABER IMMER.

 

[bahner]

AW: EMMs kommen nur bei Freischaltung

hi,
trotz
emmcache=1,1,2
und
emmlogdir = /var/log/emm
rausgenommen,
weiterhin kein emm in den letzten12 stunden erhalten?????
Sender Sky sport news hd ist eingeschaltet.

gruß bahner

 

[webman2]

AW: EMMs kommen nur bei Freischaltung

Das prob wird bei Dir dann sein, dass Du mit newcamd loggst.

 

[4gx35]

AW: EMMs kommen nur bei Freischaltung

was hast du überhaupt für einen server und warum läuft da doscam ?

kein cccam oder oscam client vorhanden ?

 

[bahner]

AW: EMMs kommen nur bei Freischaltung

hi,
also der server ist ein raspi mit doscam24b,
und auf meiner coolstream tank ist auch die doscam 24b drauf.
als protocol ist cccamext vorhanden.


gruß bahner

 

[4gx35]

AW: EMMs kommen nur bei Freischaltung

würde mal normale oscam compilieren und configs für oscam verwenden
wozu brauchst du doscam auf dem pi, ipc vorhanden ?
evtl. auch nur cccam auf dem client testen

 

[pehedima]

AW: EMMs kommen nur bei Freischaltung

Poste doch bitte erstmal alle Konfigurationsdateien vom Server und Client, inkl. Logfile vom Server.
Ansonsten können wir hier nur raten.

 

[bahner]

AW: EMMs kommen nur bei Freischaltung

config vom server raspi doscam 24b

Spoiler

[global]
logfile = /var/log/oscam.log
maxlogsize = 1000

[cache]
delay = 120

[newcamd]
port = 26265@1830:000000;26566@098C:000000;26575@0500:043800
allowed = 0.0.0.0-255.255.255.255
key = 0102030405060708091011121314

[cccam]
port = 26567
nodeid = BCDD46FB10661584

[monitor]
nocrypt = 192.168.0.0-192.168.255.255
aulow = 120
hideclient_to = 30

[webif]
httpport = 26500
httpuser = Neo
httppwd = Merlin
httpcss = /var/config/blackstyle.css
httprefresh = 7
httphideidleclients = 1
httpallowed = 0.0.0.0-255.255.255.255
httpdyndns = xxxxx
aulow = 120
hideclient_to = 30

[reader]
label = v14
protocol = mouse
device = /dev/v14
caid = 098C
ins7e11 = 15
detect = cd
mhz = 600
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1

[reader]
label = hd+
protocol = mouse
device = /dev/hdplus
caid = 1830
boxkey = A7642F57BC96D37C
rsakey = BF35........EB64E8168EF09E4D9C5CCA4DD5
detect = cd
mhz = 600
group = 2
emmcache = 1,1,0
blockemm-unknown = 1
blockemm-s = 1

[reader]
label = red
protocol = mouse
device = /dev/red
caid = 0500
detect = cd
ident = 0500:043800
group = 3
emmcache = 1,1,0

[reader]
label = keys
protocol = constcw
device = /var/config/SoftCam.Key
caid = 0D05
group = 4
emmcache = 1,1,0

[account]
user = neo
pwd = neo
au = v14,hd+,red
group = 1,2,3,4

config vom client doscam 24b

Spoiler

[global]
disablelog = 1
logfile = stdout;/tmp/doscam.log
#zeroconf = 0

[reader]
label = cccamremote
protocol = cccam
device = 192.168.178.5,26567
user = neo
password = neo
inactivitytimeout = 30
group = 1
emmcache = 1,1,0
ccckeepalive = 1

logfile server:

Spoiler

-------------------------------------------------------------------------------
>> DOSCam << started at Fri May 8 14:28:27 2015
-------------------------------------------------------------------------------
2015/05/08 14:28:27 0 s >> DOSCam << started, V0.24b (arm-bcm2708hardfp-linux-gnueabi)
2015/05/08 14:28:27 0 s creating pidfile /tmp/.doscam/doscam.pid with pid 22447
2015/05/08 14:28:27 0 s services reloaded: 0 services freed, 3 services loaded, rejected 0
2015/05/08 14:28:27 0 s userdb reloaded: 7 accounts loaded, 0 expired, 0 disabled
2015/05/08 14:28:27 0 s signal handling initialized
2015/05/08 14:28:27 0 s 199 service-id's loaded in 4ms
2015/05/08 14:28:27 0 s 25 tier-id's loaded
2015/05/08 14:28:27 0 s LED support is not active. Can't detect machine type.
2015/05/08 14:28:27 0 s monitor: initialized (fd=5, port=988)
2015/05/08 14:28:27 0 s newcamd: initialized (fd=6, port=26265)
2015/05/08 14:28:27 0 s -> CAID: 1830 PROVID: 000000
2015/05/08 14:28:27 0 s newcamd: initialized (fd=7, port=26566)
2015/05/08 14:28:27 0 s -> CAID: 098C PROVID: 000000
2015/05/08 14:28:27 0 s newcamd: initialized (fd=8, port=26575)
2015/05/08 14:28:27 0 s -> CAID: 0500 PROVID: 043800
2015/05/08 14:28:27 0 s cccam (used for zeroconf): initialized (fd=9, port=21526)
2015/05/08 14:28:27 0 s cccam: initialized (fd=10, port=26567)
2015/05/08 14:28:27 0 s v14 [mouse] creating thread for device /dev/v14
2015/05/08 14:28:27 0 s hd+ [mouse] creating thread for device /dev/hdplus
2015/05/08 14:28:27 0 s red [mouse] creating thread for device /dev/red
2015/05/08 14:28:27 0 s keys [constcw] creating thread for device /var/config/SoftCam.Key
2015/05/08 14:28:27 0 s waiting for local card init
2015/05/08 14:28:27 1182698 p keys [constcw] proxy initialized, server /var/config/SoftCam.Key:0
2015/05/08 14:28:27 118A738 h webif: decompressed 50154 bytes back into 144440 bytes
2015/05/08 14:28:27 118A738 h HTTP Server running. ip=0.0.0.0 port=26500
2015/05/08 14:28:27 1180B10 r red [mouse] Reader initialized (device=/dev/red, detect=cd, mhz=357, cardmhz=357)
2015/05/08 14:28:27 1178538 r v14 [mouse] Reader initialized (device=/dev/v14, detect=cd, mhz=600, cardmhz=357)
2015/05/08 14:28:28 117A0C0 r hd+ [mouse] Reader initialized (device=/dev/hdplus, detect=cd, mhz=600, cardmhz=357)
2015/05/08 14:28:28 1180B10 r red [mouse] card detected
2015/05/08 14:28:28 117A0C0 r hd+ [mouse] card detected
2015/05/08 14:28:28 1178538 r v14 [mouse] card detected
2015/05/08 14:28:29 1180B10 r red [mouse] ATR: 3F 77 18 00 00 C2 EB 41 02 6C 90 00
2015/05/08 14:28:29 1178538 r v14 [mouse] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/05/08 14:28:29 1178538 r v14 [mouse] Init card protocol T0, FI=1, F=372, D=16, N=2
2015/05/08 14:28:29 1178538 r v14 [mouse] Setting baudrate to 153600 bps
2015/05/08 14:28:29 1178538 r v14 [mouse] Calculated work ETU is 3.88 us
2015/05/08 14:28:30 1178538 r v14 [mouse] ATR Fsmax is: 5 MHz, clocking card to wanted user cardspeed of 6.00 MHz (specified in reader->mhz)
2015/05/08 14:28:30 1180B10 r red [mouse] Init card protocol T0, FI=1, F=372, D=12, N=0
2015/05/08 14:28:30 1180B10 r red [mouse] Setting baudrate to 115200 bps
2015/05/08 14:28:30 1180B10 r red [mouse] Calculated work ETU is 8.68 us
2015/05/08 14:28:30 1180B10 r red [mouse] ATR Fsmax is: 5 MHz, clocking card to wanted user cardspeed of 3.57 MHz (specified in reader->mhz)
2015/05/08 14:28:30 117A0C0 r hd+ [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2015/05/08 14:28:30 117A0C0 r hd+ [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/05/08 14:28:30 117A0C0 r hd+ [mouse] Setting baudrate to 111600 bps
2015/05/08 14:28:30 117A0C0 r hd+ [mouse] Calculated work ETU is 5.33 us
2015/05/08 14:28:30 117A0C0 r hd+ [mouse] ATR Fsmax is: 5 MHz, clocking card to wanted user cardspeed of 6.00 MHz (specified in reader->mhz)
2015/05/08 14:28:30 117A0C0 r hd+ [mouse] Card responded ok for ifsd request of 251
2015/05/08 14:28:31 1178538 r v14 [mouse] Card type: P1TV
2015/05/08 14:28:31 1178538 r v14 [mouse] Rom version: 20AA
2015/05/08 14:28:31 1178538 r v14 [mouse] parental lock setting: FF FF FF FF
2015/05/08 14:28:31 1178538 r v14 [mouse] parental lock disabled
2015/05/08 14:28:31 1178538 r v14 [mouse] parental lock setting after disabling: FF FF FF FF
2015/05/08 14:28:31 1178538 r v14 [mouse] type: VideoGuard Sky Germany (098C), caid: 098C
2015/05/08 14:28:31 1178538 r v14 [mouse] serial: ########, BoxID: ########, baseyear: 2004
2015/05/08 14:28:31 1178538 r v14 [mouse] ready for requests
2015/05/08 14:28:31 1178538 r v14 [mouse] found card system videoguard2
2015/05/08 14:28:31 1178538 r v14 [videoguard2] card detected
2015/05/08 14:28:31 1178538 r v14 [videoguard2] type: VideoGuard Sky Germany (098C)
2015/05/08 14:28:31 1180B10 r red [mouse] using ecm #710 for long viaccess ecm
2015/05/08 14:28:31 117A0C0 r hd+ [mouse] detect native nagra card
2015/05/08 14:28:31 1180B10 r red [mouse] type: Viaccess (non-standard atr), caid: 0500, serial: ##########
2015/05/08 14:28:31 1180B10 r red [mouse] providers: 2 (FFF8F0,043800)
2015/05/08 14:28:31 1180B10 r red [mouse] Using PIN 0000!
2015/05/08 14:28:31 1180B10 r red [mouse] Parental lock disabled
2015/05/08 14:28:31 1180B10 r red [mouse] ready for requests
2015/05/08 14:28:31 1180B10 r red [mouse] found card system viaccess
2015/05/08 14:28:31 1180B10 r red [viaccess] card detected
2015/05/08 14:28:31 1180B10 r red [viaccess] serial: ##########
2015/05/08 14:28:31 1180B10 r red [viaccess] provider: 1, id: ######################, sa: ########, geo: empty
2015/05/08 14:28:31 117A0C0 r hd+ [mouse] found card system nagra
2015/05/08 14:28:31 117A0C0 r hd+ [nagra] ROM: D N A S P 1 4 2
2015/05/08 14:28:31 117A0C0 r hd+ [nagra] REV: R e v G C 6
2015/05/08 14:28:31 117A0C0 r hd+ [nagra] SER: ############
2015/05/08 14:28:31 117A0C0 r hd+ [nagra] CAID: 1830
2015/05/08 14:28:31 117A0C0 r hd+ [nagra] Prv.ID: 00 00 34 11 (sysid)
2015/05/08 14:28:31 117A0C0 r hd+ [nagra] Prv.ID: 00 00 00 00
2015/05/08 14:28:31 117A0C0 r hd+ [nagra] IRD ID: ############
2015/05/08 14:28:31 117A0C0 r hd+ [nagra] active to: 2015/06/29 12:59
2015/05/08 14:28:31 117A0C0 r hd+ [nagra] -----------------------------------------
2015/05/08 14:28:31 117A0C0 r hd+ [nagra] |id |tier |valid from |valid to |
2015/05/08 14:28:31 117A0C0 r hd+ [nagra] +----+--------+------------+------------+
2015/05/08 14:28:32 117A0C0 r hd+ [nagra] |8011|0BEA |2011/02/13 |2016/03/16 |
2015/05/08 14:28:32 117A0C0 r hd+ [nagra] |8011|0065 |1992/01/01 |1993/01/01 |
2015/05/08 14:28:32 1180B10 r red [viaccess] provider: 2, id: ######################, sa: ########, geo: FF FF FF FF
2015/05/08 14:28:32 117A0C0 r hd+ [nagra] |8011|0064 |2010/03/05 |2011/03/06 |
2015/05/08 14:28:32 117A0C0 r hd+ [nagra] -----------------------------------------
2015/05/08 14:28:32 117A0C0 r hd+ [nagra] ready for requests
2015/05/08 14:28:32 1180B10 r red [viaccess] class: 01, expiry date: 2014/09/12 - 2015/09/11
2015/05/08 14:28:33 0 s init for all local cards done
2015/05/08 14:28:33 0 s anti cascading disabled
2015/05/08 14:28:33 1196960 c anonymous disconnected from 192.168.178.41
2015/05/08 14:29:01 1196960 c encrypted cccam-client 192.168.178.41 granted (neo, au=on (3 reader))
2015/05/08 14:29:04 1178538 r v14 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2015/05/08 14:29:04 1196960 c neo (098C&000000/0000/0000/006C/98:A232): not found (55 ms) by v14 - Sky Sport News HD
2015/05/08 14:29:04 1178538 r v14 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed

müßte evtl. beim client der emmcache auch auf 1,1,2 gestellt werden?


gruß bahner

 

[4gx35]

AW: EMMs kommen nur bei Freischaltung

kein dvbapi und dvbapi user auf dem client ?
oder wird das nicht benötigt bei doscam ?

emmcache war doch schon lange geklärt, eher unwichtig