Edision1600

E

ervinja

Newbie

Registriert

1. November 2009

Beiträge

16

Reaktionspunkte

0

Punkte

1

• 1. November 2009

• #1

Because of incorrect firmwear me isn't making edision 1600 how him to repair

 

O

Olaf010101

DEB Inventar

Registriert

4. August 2011

Beiträge

12.346

Reaktionspunkte

221

Punkte

63

• 1. November 2009

• #2

AW: Edision1600

try original FW upload withaliminiup 4.0!
otherwise there is only JTAG

 

OP

OP

E

ervinja

Newbie

Registriert

1. November 2009

Beiträge

16

Reaktionspunkte

0

Punkte

1

• 2. November 2009

• #3

AW: Edision1600

search program behind JTAG don't find all which tried isn't making or you have some program

 

K

kenshiculus

Guest

• 2. November 2009

• #4

AW: Edision1600

bellof schrieb:

try original FW upload withaliminiup 4.0!
otherwise there is only JTAG

Zum Vergrößern anklicken....

* This loader cannot be used for Edision 1600. Please use Setedit1600 or upgrade 2.0.0b (option allchunk no bootloader) to flash this box.


What is on the box-display showed? What is on TV showed? If there is nothing displayed, you can take the JTAG for SmartMX04CI and the box will work again.

 

Zuletzt bearbeitet von einem Moderator: 2. November 2009

OP

OP

E

ervinja

Newbie

Registriert

1. November 2009

Beiträge

16

Reaktionspunkte

0

Punkte

1

• 2. November 2009

• #5

AW: Edision1600

Here is problem on display is showed 8 when him connect on LPT -JTAG.Tried to am with SmartMX04CI also doesn't go.

 

K

kenshiculus

Guest

• 2. November 2009

• #6

AW: Edision1600

is the JTAG you use this one?*https://www.digital-eliteboard.com/resources/


Then it is important that the wires are connected as shown. The Jumper has to be used, too. The driver have to be installed (install driver - start driver). What does the flaps tool show after switch on ok??? *

 

OP

OP

E

ervinja

Newbie

Registriert

1. November 2009

Beiträge

16

Reaktionspunkte

0

Punkte

1

• 3. November 2009

• #7

AW: Edision1600

something is first to make JTAG -Flash or install driver now is showed wrong nine

 

Zuletzt bearbeitet: 3. November 2009

K

kenshiculus

Guest

• 3. November 2009

• #8

AW: Edision1600

a second time:


* The driver has to be installed (install driver - start driver). What does the flaps tool show after switch on ok???

 

OP

OP

E

ervinja

Newbie

Registriert

1. November 2009

Beiträge

16

Reaktionspunkte

0

Punkte

1

• 3. November 2009

• #9

AW: Edision1600

come on am- install driver- and writes above -status OKAY- some long this stacks
don't understand something think with -flaps tool

 

OP

OP

E

ervinja

Newbie

Registriert

1. November 2009

Beiträge

16

Reaktionspunkte

0

Punkte

1

• 4. November 2009

• #10

AW: Edision1600

Hitman -please or have another idea some him let revive

 

K

kenshiculus

Guest

• 5. November 2009

• #11

AW: Edision1600

hi, does the JTAG tool run? You have to start this tool a few times sometimes. What is in desktop shown?

 

OP

OP

E

ervinja

Newbie

Registriert

1. November 2009

Beiträge

16

Reaktionspunkte

0

Punkte

1

• 5. November 2009

• #12

AW: Edision1600

I start up JTAG and after Giveo.sys and install Driver above writes OKAY after no longer all stands nothing isn't occurring on display writes or 8 or P

 

K

kenshiculus

Guest

• 5. November 2009

• #13

AW: Edision1600

start with ------------ install driver ----------- start driver ------------- when okay is showed, then choose your chip in the window after ok there will open a black window what is there after Init PrAcc to see????? ---------------------------- If the JTAG does not work, you can switch the power of the 1600CI off and make ok a second time, then give power on 1600CI ---------------------- If there does absolutely nothing work, the jumper has to be changed or the JTAG wires are wrong connected.

 

Zuletzt bearbeitet von einem Moderator: 5. November 2009

OP

OP

E

ervinja

Newbie

Registriert

1. November 2009

Beiträge

16

Reaktionspunkte

0

Punkte

1

• 5. November 2009

• #14

AW: Edision1600

I changed jamper and now started PrAcc below now blasts ERASE CHIP ....please wait..

 

K

kenshiculus

Guest

• 6. November 2009

• #15

AW: Edision1600

very well ------------ and now, make this for 5-6 times until the JTAG tool starts right ----------- how long is your JTAG between PC and Box? It should be not longer than 20 cm.........