Easymouse wird nicht mehr erkannt

ruebezahl71 · 24. Juni 2016

Habe gerade ein Backup von meinem USB vom Pogo gemacht und nach dem Neustart kam dann diese Meldung:

Das beide Reader bzw Karten defekt sein sióllen kann ich mir nicht vorstellen.

(reader) HD+de [mouse] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Input/output error
2016/06/24 08:50:17 0A08FDE5 r (reader) HD+de [mouse] Error getting card status.
2016/06/24 08:50:17 2ACD186C r (reader) V14 [mouse] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Input/output error
2016/06/24 08:50:17 2ACD186C r (reader) V14 [mouse] Error getting card status.

pehedima · 24. Juni 2016

AW: Easymouse wird nicht mehr erkannt

Ziehe mal bitte die Stromversorung vom Pogo ab, warte 2 Minuten, dann Server wieder hochfahren und die komplette oscam.log vom oscam start an posten.

ruebezahl71 · 24. Juni 2016

AW: Easymouse wird nicht mehr erkannt

(main) System name = Linux
2016/06/24 09:43:47 00000000 s (main) Host name = debian
2016/06/24 09:43:47 00000000 s (main) Release = 3.2.0-4-kirkwood
2016/06/24 09:43:47 00000000 s (main) Version = #1 Debian 3.2.51-1
2016/06/24 09:43:47 00000000 s (main) Machine = armv5tel
2016/06/24 09:43:47 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 12708
2016/06/24 09:43:47 00000000 s (config) services reloaded: 0 services freed, 4 services loaded, rejected 0
2016/06/24 09:43:47 00000000 s (config) userdb reloaded: 14 accounts loaded, 0 expired, 0 disabled
2016/06/24 09:43:47 00000000 s (main) signal handling initialized
2016/06/24 09:43:47 00000000 s (config) 1 provid's loaded
2016/06/24 09:43:47 00000000 s (config) 173 service-id's loaded in 2 ms
2016/06/24 09:43:47 00000000 s (net) cccam: initialized (fd=5, port=xxxxx)
2016/06/24 09:43:47 00000000 s (main) Binary without Irdeto module - no EMM processing for Irdeto possible!
2016/06/24 09:43:47 00000000 s (main) Binary without Conax module - no EMM processing for Conax possible!
2016/06/24 09:43:47 00000000 s (main) Binary without Cryptoworks module - no EMM processing for Cryptoworks possible!
2016/06/24 09:43:47 00000000 s (main) Binary without Seca module - no EMM processing for Seca possible!
2016/06/24 09:43:47 00000000 s (main) Binary without Viaccess module - no EMM processing for Viaccess possible!
2016/06/24 09:43:47 00000000 s (main) Binary without DRE Crypt module - no EMM processing for DRE Crypt possible!
2016/06/24 09:43:47 00000000 s (main) Binary without TONGFANG module - no EMM processing for TONGFANG possible!
2016/06/24 09:43:47 00000000 s (main) Binary without Bulcrypt module - no EMM processing for Bulcrypt possible!
2016/06/24 09:43:47 00000000 s (main) Binary without Griffin module - no EMM processing for Griffin possible!
2016/06/24 09:43:47 00000000 s (main) Binary without DGCrypt module - no EMM processing for DGCrypt possible!
2016/06/24 09:43:47 00000000 s (reader) V14 [mouse] creating thread for device /dev/ttyUSB0
2016/06/24 09:43:47 00000000 s (reader) HD+de [mouse] creating thread for device /dev/ttyUSB1
2016/06/24 09:43:47 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2016/06/24 09:43:47 00000000 s (main) waiting for local card init
2016/06/24 09:43:47 15A79461 h (webif) webif: decompressed 171799 bytes back into 410400 bytes
2016/06/24 09:43:47 15A79461 h (webif) HTTP Server running. ip=0.0.0.0 port=xxxxx
2016/06/24 09:43:47 38AC5FAD r (reader) HD+de [mouse] Buffers readed 0 bytes total time_us 75157
2016/06/24 09:43:47 6FAA4827 r (reader) V14 [mouse] Buffers readed 0 bytes total time_us 75301
2016/06/24 09:43:47 6FAA4827 r (reader) V14 [mouse] Flush readed byte Nr 1 value 03 time_us 5543
2016/06/24 09:43:47 38AC5FAD r (reader) HD+de [mouse] Flush readed byte Nr 1 value 03 time_us 6112
2016/06/24 09:43:47 38AC5FAD r (reader) HD+de [mouse] Flush readed byte Nr 2 value 40 time_us 1804
2016/06/24 09:43:47 38AC5FAD r (reader) HD+de [mouse] Flush readed byte Nr 3 value 37 time_us 33952
2016/06/24 09:43:47 38AC5FAD r (reader) HD+de [mouse] Flush readed byte Nr 4 value 5b time_us 2405
2016/06/24 09:43:47 38AC5FAD r (reader) HD+de [mouse] Flush readed byte Nr 5 value bf time_us 1362
2016/06/24 09:43:47 38AC5FAD r (reader) HD+de [mouse] Flush readed byte Nr 6 value f5 time_us 950
2016/06/24 09:43:47 38AC5FAD r (reader) HD+de [mouse] Flush readed byte Nr 7 value fe time_us 2048
2016/06/24 09:43:47 38AC5FAD r (reader) HD+de [mouse] Flush readed byte Nr 8 value 0f time_us 1828
2016/06/24 09:43:47 38AC5FAD r (reader) HD+de [mouse] Flush readed byte Nr 9 value 7d time_us 984
2016/06/24 09:43:47 38AC5FAD r (reader) HD+de [mouse] Flush readed byte Nr 10 value f2 time_us 1906
2016/06/24 09:43:47 38AC5FAD r (reader) HD+de [mouse] Flush readed byte Nr 11 value af time_us 1947
2016/06/24 09:43:47 38AC5FAD r (reader) HD+de [mouse] Flush readed byte Nr 12 value 69 time_us 956
2016/06/24 09:43:47 38AC5FAD r (reader) HD+de [mouse] Flush readed byte Nr 13 value 00 time_us 1938
2016/06/24 09:43:47 38AC5FAD r (reader) HD+de [mouse] Flush readed byte Nr 14 value ad time_us 1947
2016/06/24 09:43:47 38AC5FAD r (reader) HD+de [mouse] Flush readed byte Nr 15 value f5 time_us 959
2016/06/24 09:43:47 38AC5FAD r (reader) HD+de [mouse] Flush readed byte Nr 16 value f0 time_us 1928
2016/06/24 09:43:47 38AC5FAD r (reader) HD+de [mouse] Flush readed byte Nr 17 value ff time_us 1947
2016/06/24 09:43:47 38AC5FAD r (reader) HD+de [mouse] Flush readed byte Nr 18 value ff time_us 953
2016/06/24 09:43:47 38AC5FAD r (reader) HD+de [mouse] Flush readed byte Nr 19 value f5 time_us 1939
2016/06/24 09:43:47 38AC5FAD r (reader) HD+de [mouse] Flush readed byte Nr 20 value 73 time_us 1948
2016/06/24 09:43:47 38AC5FAD r (reader) HD+de [mouse] Flush readed byte Nr 21 value 3f time_us 957
2016/06/24 09:43:47 6FAA4827 r (reader) V14 [mouse] Buffers readed 1 bytes total time_us 80723
2016/06/24 09:43:47 6FAA4827 r (reader) V14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2016/06/24 09:43:47 38AC5FAD r (reader) HD+de [mouse] Buffers readed 21 bytes total time_us 147042
2016/06/24 09:43:47 38AC5FAD r (reader) HD+de [mouse] Reader initialized (device=/dev/ttyUSB1, detect=cd, mhz=357, cardmhz=357)
2016/06/24 09:43:48 38AC5FAD r (reader) HD+de [mouse] card detected
2016/06/24 09:43:48 6FAA4827 r (reader) V14 [mouse] card detected
2016/06/24 09:43:48 38AC5FAD r (reader) HD+de [mouse] Buffers readed 0 bytes total time_us 75123
2016/06/24 09:43:48 6FAA4827 r (reader) V14 [mouse] Buffers readed 0 bytes total time_us 75151
2016/06/24 09:43:49 38AC5FAD r (reader) HD+de [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2016/06/24 09:43:49 38AC5FAD r (reader) HD+de [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2016/06/24 09:43:49 38AC5FAD r (reader) HD+de [mouse] Setting baudrate to 38400 bps
2016/06/24 09:43:49 38AC5FAD r (reader) HD+de [mouse] Calculated work ETU is 26.05 us reader mhz = 357
2016/06/24 09:43:49 38AC5FAD r (reader) HD+de [mouse] Buffers readed 0 bytes total time_us 75120
2016/06/24 09:43:49 38AC5FAD r (reader) HD+de [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2016/06/24 09:43:49 6FAA4827 r (reader) V14 [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2016/06/24 09:43:49 6FAA4827 r (reader) V14 [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2016/06/24 09:43:49 6FAA4827 r (reader) V14 [mouse] Setting baudrate to 111600 bps
2016/06/24 09:43:49 6FAA4827 r (reader) V14 [mouse] Calculated work ETU is 8.96 us reader mhz = 357
2016/06/24 09:43:49 6FAA4827 r (reader) V14 [mouse] Buffers readed 0 bytes total time_us 75118
2016/06/24 09:43:49 6FAA4827 r (reader) V14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2016/06/24 09:43:49 6FAA4827 r (reader) V14 [mouse] Card responded ok for ifsd request of 160
2016/06/24 09:43:50 38AC5FAD r (reader) HD+de [mouse] Card type: P1TV
2016/06/24 09:43:50 38AC5FAD r (reader) HD+de [mouse] Rom version: 20AA
2016/06/24 09:43:50 38AC5FAD r (reader) HD+de [mouse] Credit available on card: 0 euro
2016/06/24 09:43:50 6FAA4827 r (reader) V14 [mouse] detect native nagra card
2016/06/24 09:43:50 38AC5FAD r (reader) HD+de [mouse] classD0 ins36: encrypted - can't parse
2016/06/24 09:43:50 38AC5FAD r (reader) HD+de [mouse] no boxID available
2016/06/24 09:43:50 38AC5FAD r (reader) HD+de [mouse] card system not supported
2016/06/24 09:43:50 38AC5FAD r (reader) HD+de [mouse] Normal mode failed, reverting to Deprecated Mode
2016/06/24 09:43:50 38AC5FAD r (reader) HD+de [mouse] Buffers readed 0 bytes total time_us 75151
2016/06/24 09:43:51 38AC5FAD r (reader) HD+de [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2016/06/24 09:43:51 38AC5FAD r (reader) HD+de [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2016/06/24 09:43:51 38AC5FAD r (reader) HD+de [mouse] Calculated work ETU is 104.20 us reader mhz = 357
2016/06/24 09:43:52 38AC5FAD r (reader) HD+de [mouse] Buffers readed 0 bytes total time_us 75121
2016/06/24 09:43:52 38AC5FAD r (reader) HD+de [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2016/06/24 09:43:53 6FAA4827 r (reader) V14 [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2016/06/24 09:43:54 6FAA4827 r (reader) V14 [mouse] T1 Resync command error, trying to reactivate!
2016/06/24 09:43:54 6FAA4827 r (reader) V14 [mouse] Buffers readed 0 bytes total time_us 75137
2016/06/24 09:43:56 38AC5FAD r (reader) HD+de [mouse] card system not supported
2016/06/24 09:43:56 38AC5FAD r (reader) HD+de [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2016/06/24 09:43:56 38AC5FAD r (reader) HD+de [mouse] card initializing error
2016/06/24 09:43:56 6FAA4827 r (reader) V14 [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2016/06/24 09:43:56 6FAA4827 r (reader) V14 [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2016/06/24 09:43:56 6FAA4827 r (reader) V14 [mouse] Setting baudrate to 111600 bps
2016/06/24 09:43:56 6FAA4827 r (reader) V14 [mouse] Calculated work ETU is 8.96 us reader mhz = 357
2016/06/24 09:43:56 6FAA4827 r (reader) V14 [mouse] Buffers readed 0 bytes total time_us 75125
2016/06/24 09:43:56 6FAA4827 r (reader) V14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2016/06/24 09:43:56 6FAA4827 r (reader) V14 [mouse] Card responded ok for ifsd request of 160
2016/06/24 09:43:56 6FAA4827 r (reader) V14 [mouse] card system not supported
2016/06/24 09:43:56 6FAA4827 r (reader) V14 [mouse] Normal mode failed, reverting to Deprecated Mode
2016/06/24 09:43:56 6FAA4827 r (reader) V14 [mouse] Buffers readed 0 bytes total time_us 75138
2016/06/24 09:43:57 6FAA4827 r (reader) V14 [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2016/06/24 09:43:57 6FAA4827 r (reader) V14 [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2016/06/24 09:43:57 6FAA4827 r (reader) V14 [mouse] Calculated work ETU is 104.20 us reader mhz = 357
2016/06/24 09:43:57 6FAA4827 r (reader) V14 [mouse] Buffers readed 0 bytes total time_us 75785
2016/06/24 09:43:57 6FAA4827 r (reader) V14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2016/06/24 09:43:59 6FAA4827 r (reader) V14 [mouse] Warning: Card returned error on setting ifsd value to 160
2016/06/24 09:44:00 6FAA4827 r (reader) V14 [mouse] detect native nagra card
2016/06/24 09:44:02 6FAA4827 r (reader) V14 [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2016/06/24 09:44:04 6FAA4827 r (reader) V14 [mouse] T1 Resync command error, trying to reactivate!
2016/06/24 09:44:04 6FAA4827 r (reader) V14 [mouse] Buffers readed 0 bytes total time_us 75125
2016/06/24 09:44:05 6FAA4827 r (reader) V14 [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2016/06/24 09:44:05 6FAA4827 r (reader) V14 [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2016/06/24 09:44:05 6FAA4827 r (reader) V14 [mouse] Setting baudrate to 111600 bps
2016/06/24 09:44:05 6FAA4827 r (reader) V14 [mouse] Calculated work ETU is 8.96 us reader mhz = 357
2016/06/24 09:44:05 6FAA4827 r (reader) V14 [mouse] Buffers readed 0 bytes total time_us 75119
2016/06/24 09:44:05 6FAA4827 r (reader) V14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2016/06/24 09:44:05 6FAA4827 r (reader) V14 [mouse] Card responded ok for ifsd request of 160
2016/06/24 09:44:08 6FAA4827 r (reader) V14 [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2016/06/24 09:44:09 6FAA4827 r (reader) V14 [mouse] T1 Resync command error, trying to reactivate!
2016/06/24 09:44:09 6FAA4827 r (reader) V14 [mouse] Buffers readed 0 bytes total time_us 75121
2016/06/24 09:44:11 6FAA4827 r (reader) V14 [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2016/06/24 09:44:11 6FAA4827 r (reader) V14 [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2016/06/24 09:44:11 6FAA4827 r (reader) V14 [mouse] Setting baudrate to 111600 bps
2016/06/24 09:44:11 6FAA4827 r (reader) V14 [mouse] Calculated work ETU is 8.96 us reader mhz = 357
2016/06/24 09:44:11 6FAA4827 r (reader) V14 [mouse] Buffers readed 0 bytes total time_us 75131
2016/06/24 09:44:11 6FAA4827 r (reader) V14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2016/06/24 09:44:11 6FAA4827 r (reader) V14 [mouse] Card responded ok for ifsd request of 160
2016/06/24 09:44:11 6FAA4827 r (reader) V14 [mouse] card system not supported
2016/06/24 09:44:11 6FAA4827 r (reader) V14 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2016/06/24 09:44:11 6FAA4827 r (reader) V14 [mouse] card initializing error
2016/06/24 09:44:11 00000000 s (main) init for all local cards done
2016/06/24 09:44:11 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2016/06/24 09:44:11 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms

pehedima · 24. Juni 2016

AW: Easymouse wird nicht mehr erkannt

Deine beiden Karten sind vertauscht.

Am besten feste Zuordung der Reader über udev Rules vornehmen. Dann passiert das nicht mehr.

Ansonsten erstmal die beiden Karte tauschen, Server neu starten, oscam.log vom start an erneut posten.

ruebezahl71 · 24. Juni 2016

AW: Easymouse wird nicht mehr erkannt

(main) creating pidfile /tmp/.oscam/oscam.pid with pid 18768
2016/06/24 10:00:52 00000000 s (config) services reloaded: 0 services freed, 4 services loaded, rejected 0
2016/06/24 10:00:52 00000000 s (config) userdb reloaded: 14 accounts loaded, 0 expired, 0 disabled
2016/06/24 10:00:52 00000000 s (main) signal handling initialized
2016/06/24 10:00:52 00000000 s (config) 1 provid's loaded
2016/06/24 10:00:52 00000000 s (config) 173 service-id's loaded in 2 ms
2016/06/24 10:00:52 00000000 s (net) cccam: initialized (fd=5, port=xxxxx)
2016/06/24 10:00:52 00000000 s (main) Binary without Irdeto module - no EMM processing for Irdeto possible!
2016/06/24 10:00:52 00000000 s (main) Binary without Conax module - no EMM processing for Conax possible!
2016/06/24 10:00:52 00000000 s (main) Binary without Cryptoworks module - no EMM processing for Cryptoworks possible!
2016/06/24 10:00:52 00000000 s (main) Binary without Seca module - no EMM processing for Seca possible!
2016/06/24 10:00:52 00000000 s (main) Binary without Viaccess module - no EMM processing for Viaccess possible!
2016/06/24 10:00:52 00000000 s (main) Binary without DRE Crypt module - no EMM processing for DRE Crypt possible!
2016/06/24 10:00:52 00000000 s (main) Binary without TONGFANG module - no EMM processing for TONGFANG possible!
2016/06/24 10:00:52 00000000 s (main) Binary without Bulcrypt module - no EMM processing for Bulcrypt possible!
2016/06/24 10:00:52 00000000 s (main) Binary without Griffin module - no EMM processing for Griffin possible!
2016/06/24 10:00:52 00000000 s (main) Binary without DGCrypt module - no EMM processing for DGCrypt possible!
2016/06/24 10:00:52 00000000 s (reader) V14 [mouse] creating thread for device /dev/ttyUSB0
2016/06/24 10:00:52 00000000 s (reader) HD+de [mouse] creating thread for device /dev/ttyUSB1
2016/06/24 10:00:52 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2016/06/24 10:00:52 00000000 s (main) waiting for local card init
2016/06/24 10:00:52 6FAA4827 r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB0 (errno=2 No such file or directory)
2016/06/24 10:00:52 6FAA4827 r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB0
2016/06/24 10:00:52 38AC5FAD r (reader) HD+de [mouse] ERROR: Opening device /dev/ttyUSB1 (errno=2 No such file or directory)
2016/06/24 10:00:52 38AC5FAD r (reader) HD+de [mouse] Cannot open device: /dev/ttyUSB1
2016/06/24 10:00:52 15A79461 h (webif) webif: decompressed 171799 bytes back into 410400 bytes
2016/06/24 10:00:52 15A79461 h (webif) HTTP Server running. ip=0.0.0.0 port=xxxxx
2016/06/24 10:00:54 6FAA4827 r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB0 (errno=2 No such file or directory)
2016/06/24 10:00:54 6FAA4827 r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB0
2016/06/24 10:00:54 38AC5FAD r (reader) HD+de [mouse] ERROR: Opening device /dev/ttyUSB1 (errno=2 No such file or directory)
2016/06/24 10:00:54 38AC5FAD r (reader) HD+de [mouse] Cannot open device: /dev/ttyUSB1
2016/06/24 10:00:56 6FAA4827 r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB0 (errno=2 No such file or directory)
2016/06/24 10:00:56 6FAA4827 r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB0
2016/06/24 10:00:56 38AC5FAD r (reader) HD+de [mouse] ERROR: Opening device /dev/ttyUSB1 (errno=2 No such file or directory)
2016/06/24 10:00:56 38AC5FAD r (reader) HD+de [mouse] Cannot open device: /dev/ttyUSB1
2016/06/24 10:00:58 6FAA4827 r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB0 (errno=2 No such file or directory)
2016/06/24 10:00:58 6FAA4827 r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB0
2016/06/24 10:00:58 38AC5FAD r (reader) HD+de [mouse] ERROR: Opening device /dev/ttyUSB1 (errno=2 No such file or directory)
2016/06/24 10:00:58 38AC5FAD r (reader) HD+de [mouse] Cannot open device: /dev/ttyUSB1
2016/06/24 10:01:00 6FAA4827 r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB0 (errno=2 No such file or directory)
2016/06/24 10:01:00 6FAA4827 r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB0
2016/06/24 10:01:00 38AC5FAD r (reader) HD+de [mouse] ERROR: Opening device /dev/ttyUSB1 (errno=2 No such file or directory)
2016/06/24 10:01:00 38AC5FAD r (reader) HD+de [mouse] Cannot open device: /dev/ttyUSB1
2016/06/24 10:01:02 6FAA4827 r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB0 (errno=2 No such file or directory)
2016/06/24 10:01:02 6FAA4827 r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB0
2016/06/24 10:01:02 38AC5FAD r (reader) HD+de [mouse] ERROR: Opening device /dev/ttyUSB1 (errno=2 No such file or directory)
2016/06/24 10:01:02 38AC5FAD r (reader) HD+de [mouse] Cannot open device: /dev/ttyUSB1
2016/06/24 10:01:04 6FAA4827 r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB0 (errno=2 No such file or directory)
2016/06/24 10:01:04 6FAA4827 r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB0
2016/06/24 10:01:04 38AC5FAD r (reader) HD+de [mouse] ERROR: Opening device /dev/ttyUSB1 (errno=2 No such file or directory)
2016/06/24 10:01:04 38AC5FAD r (reader) HD+de [mouse] Cannot open device: /dev/ttyUSB1
2016/06/24 10:01:06 6FAA4827 r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB0 (errno=2 No such file or directory)
2016/06/24 10:01:06 6FAA4827 r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB0
2016/06/24 10:01:06 38AC5FAD r (reader) HD+de [mouse] ERROR: Opening device /dev/ttyUSB1 (errno=2 No such file or directory)
2016/06/24 10:01:06 38AC5FAD r (reader) HD+de [mouse] Cannot open device: /dev/ttyUSB1
2016/06/24 10:01:08 6FAA4827 r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB0 (errno=2 No such file or directory)
2016/06/24 10:01:08 6FAA4827 r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB0
2016/06/24 10:01:08 38AC5FAD r (reader) HD+de [mouse] ERROR: Opening device /dev/ttyUSB1 (errno=2 No such file or directory)
2016/06/24 10:01:08 38AC5FAD r (reader) HD+de [mouse] Cannot open device: /dev/ttyUSB1
2016/06/24 10:01:10 6FAA4827 r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB0 (errno=2 No such file or directory)
2016/06/24 10:01:10 6FAA4827 r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB0
2016/06/24 10:01:10 38AC5FAD r (reader) HD+de [mouse] ERROR: Opening device /dev/ttyUSB1 (errno=2 No such file or directory)
2016/06/24 10:01:10 38AC5FAD r (reader) HD+de [mouse] Cannot open device: /dev/ttyUSB1
2016/06/24 10:01:12 6FAA4827 r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB0 (errno=2 No such file or directory)
2016/06/24 10:01:12 6FAA4827 r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB0
2016/06/24 10:01:12 38AC5FAD r (reader) HD+de [mouse] ERROR: Opening device /dev/ttyUSB1 (errno=2 No such file or directory)
2016/06/24 10:01:12 38AC5FAD r (reader) HD+de [mouse] Cannot open device: /dev/ttyUSB1
2016/06/24 10:01:13 00000000 s (main) init for all local cards done
2016/06/24 10:01:13 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2016/06/24 10:01:13 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms

Hat sich nichts getan habe die Karten mal umgesteckt obwohl ich da ja nichts gemacht habe und die V14 hat ja 3,5V und die HD+ 5V an dem reader aeingestellt daran seh ich ja das nichts versteckt wurde?

- - - - - - - - - -

pehedima · 24. Juni 2016

AW: Easymouse wird nicht mehr erkannt

Du hast die Karten ja auch nicht umgesteckt, nur dein Pogo hat die Reader aufgrund der fehlenden UDEV-Zuordung vertauscht erkannt.

Du kannst die Reader generell auf 5V stellen. Der V14 macht das nichts.

Lt. dem letzten LOG werden beide Reader nicht erkannt, daher ist das ein anderer Fehler als zuvor.

Hast du einen aktiven HUB vor den Readern?
Wie ist die Spannungsversorung des Pogo?

Dann nochmal: Stecker abziehen, 2 Min. warten, erneut stecken, oscam.log posten.

ruebezahl71 · 24. Juni 2016

AW: Easymouse wird nicht mehr erkannt

Spannungsversorgung 230V Netz OK Log kommt gleich Wie kann ich die UDEV zuordnung machen?
Keine Hubs Reader stecken direkt.

So habe jetzt erst mit nur V14 und 1 Reader neu gestartet und dann HD+ dazu neu gestartet und jetzt ist es wieder hell.
Werde mich aber mit dem UDEV auseinandersetzen.
Könnt ihr mir da auch einen Tip geben?

Vielen Dank für die super und schnelle Hilfe.

pehedima · 24. Juni 2016

AW: Easymouse wird nicht mehr erkannt

Hast du IPC auf dem Pogo?

Ansonsten mal im Pogo-Bereich nachlesen.

Alex · 24. Juni 2016

AW: Easymouse wird nicht mehr erkannt

UDEV kannst du entweder über das WEbIF von IPC unter Manager machen oder wie hier beschrieben:
[h=3]FAQ: Reader ein festen Port zuweisen.[/h]

ruebezahl71 · 24. Juni 2016

AW: Easymouse wird nicht mehr erkannt

Ja ich habe IPC auf dem Pogo laufen.
werde es heute Mittag gleich mal probieren, beim nächsten Stromausfall etc. hätte ich ja sonst wieder dieses Problem.

Habe es im WebIf gemacht war ja recht einfach habe es so wie die reader heißen benannt. Hat aber dann nicht fkt. und es waren nach dem Neustart wieder die Karten vertauscht. Habe es dann nochmals einzeln gemacht und hoffe das es jetzt geht.
Ansonsten muß ich das ganze mal über Putty probieren.

Suche

Suche

Easymouse wird nicht mehr erkannt

ruebezahl71

Hacker

pehedima

ruebezahl71

Hacker

pehedima

ruebezahl71

Hacker

pehedima

ruebezahl71

Hacker

pehedima

Alex

ruebezahl71

Hacker

Ähnliche Themen

Spenden Unterstützung