EasyMouse wird am Usb nicht erkannt

[korsar]

Meine EasyMouse wird am usb Port von meinem Igel nicht mehr erkannt.
Hat jemand eine Idee?

Spoiler

dmesg | grep USB
[ 1.718788] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.718973] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[ 1.735457] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[ 1.735565] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.735573] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.740468] hub 1-0:1.0: USB hub found
[ 1.741867] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.742081] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 1.742226] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.742234] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.743641] hub 2-0:1.0: USB hub found
[ 1.743899] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 1.744141] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.744149] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.744496] hub 3-0:1.0: USB hub found
[ 1.744716] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 1.744842] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.744850] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.748220] hub 4-0:1.0: USB hub found
[ 1.755985] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[ 1.756202] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.756210] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.756576] hub 5-0:1.0: USB hub found
[ 2.408128] usb 2-1: new full-speed USB device number 2 using uhci_hcd
[ 2.606273] usb 2-1: New USB device found, idVendor=0403, idProduct=6001
[ 2.606284] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.606291] usb 2-1: Product: FT232R USB UART
[ 2.852077] usb 5-1: new full-speed USB device number 2 using uhci_hcd
[ 3.062201] usb 5-1: New USB device found, idVendor=076b, idProduct=3021
[ 3.062210] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.062217] usb 5-1: Product: Smart Card Reader USB
[168763.424101] usb 2-1: USB disconnect, device number 2
[168772.124102] usb 2-1: new full-speed USB device number 3 using uhci_hcd
[168772.323088] usb 2-1: New USB device found, idVendor=0403, idProduct=6001
[168772.323100] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[168772.323107] usb 2-1: Product: FT232R USB UART
[168790.208102] usb 2-1: USB disconnect, device number 3
[168809.492060] usb 2-1: new full-speed USB device number 4 using uhci_hcd
[168809.691086] usb 2-1: New USB device found, idVendor=0403, idProduct=6001
[168809.691097] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[168809.691104] usb 2-1: Product: FT232R USB UART
[170296.312100] usb 2-1: USB disconnect, device number 4
[170339.236068] usb 2-1: new full-speed USB device number 5 using uhci_hcd
[170339.804053] usb 2-1: new full-speed USB device number 6 using uhci_hcd
[170340.372048] usb 2-1: new full-speed USB device number 7 using uhci_hcd
[170340.900050] usb 2-1: new full-speed USB device number 8 using uhci_hcd
[170341.316087] hub 2-0:1.0: unable to enumerate USB device on port 1
[170355.672046] usb 1-1: new high-speed USB device number 5 using ehci_hcd
[170355.830410] usb 1-1: New USB device found, idVendor=0011, idProduct=7788
[170355.830422] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3

Spoiler

dpkg-reconfigure --all
[ ok ] Stopping ACPI services....
[ ok ] Starting ACPI services....
Traceback (most recent call last):
File "/usr/bin/pyclean", line 24, in <module>
import logging
File "/usr/lib/python2.7/logging/__init__.py", line 26, in <module>
import sys, os, time, cStringIO, traceback, warnings, weakref
ValueError: bad marshal data (unknown type code)

Spoiler: Reader conf.

[reader]
label = sky_V14
protocol = mouse
device = /dev/ttyUSB0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 357
group = 1
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

 

[Alex]

Wie schaut den das Oscam.log ab start aus?

 

[korsar]

Reicht es wenn ich das oscam neu starte, oder den ganzen Server?

 

[czutok]

zihe mal das USB kabel raus , warte so 30 sekunden und stecke es wider rein , kann sein das dein igel den usb port gewehselt hat

ewentuel ganzen server neustarten

 

[korsar]

usb Kabel habe ich gezogen 1Minute gewartet, angeschlossen, ohne Erfolg.
Neustart verlief auch ohne Erfolg.
Mir ist noch aufgefallen dass sich der Reader im Webif von selbst ausschaltet.

 

[axel]

Hi,

poste mal die Ausgabe von:

lsusb

Gruß

 

[korsar]

Spoiler: lsusb

> lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT232 Serial (UART) IC
Bus 005 Device 002: ID 076b:3021 OmniKey AG CardMan 3121

 

[axel]

Hi,

erkannt werden beide Reader zumindest.

Bus 002 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT232 Serial (UART) IC
Bus 005 Device 002: ID 076b:3021 OmniKey AG CardMan 3121

Sehr merkwürdig.

Hast Du die Reader fest zugeordnet via UDEV?

Gruß

 

[korsar]

keine Ahnung, denke mal nicht. Kann man das irgendwie feststellen?

 

[Alex]

Was sagt den das OScam-Log ab OScam start?

 

[korsar]

Spoiler

• 2018/07/24 13:05:51 00000000 s (main) System name = Linux
• 2018/07/24 13:05:51 00000000 s (main) Host name = OSPC
• 2018/07/24 13:05:51 00000000 s (main) Release = 3.2.0-4-686-pae
• 2018/07/24 13:05:51 00000000 s (main) Version = #1 SMP Debian 3.2.51-1
• 2018/07/24 13:05:51 00000000 s (main) Machine = i686
• 2018/07/24 13:05:51 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 3079
• 2018/07/24 13:05:51 00000000 s (config) services reloaded: 0 services freed, 5 services loaded, rejected 0
• 2018/07/24 13:05:51 00000000 s (config) userdb reloaded: 12 accounts loaded, 0 expired, 0 disabled
• 2018/07/24 13:05:51 00000000 s (main) signal handling initialized
• 2018/07/24 13:05:51 00000000 s (config) 36 provid's loaded
• 2018/07/24 13:05:51 00000000 s (config) 196 service-id's loaded in 1 ms
• 2018/07/24 13:05:51 00000000 s (config) 82 tier-id's loaded
• 2018/07/24 13:05:51 00000000 s (net) cccam: initialized (fd=5, port=xxxxxx)
• 2018/07/24 13:05:51 00000000 s (reader) sky_V14 [mouse] creating thread for device /dev/ttyUSB0
• 2018/07/24 13:05:51 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
• 2018/07/24 13:05:51 00000000 s (main) waiting for local card init
• 2018/07/24 13:05:51 4B1C619B r (reader) sky_V14 [mouse] ERROR: Opening device /dev/ttyUSB0 (errno=2 No such file or directory)
• 2018/07/24 13:05:51 4B1C619B r (reader) sky_V14 [mouse] Cannot open device: /dev/ttyUSB0
• 2018/07/24 13:05:51 3DA45FBE p (reader) oscamwrt.mooo.com: resolved ip=193.25.100.199
• 2018/07/24 13:05:51 58A49F44 h (webif) webif: decompressed 177453 bytes back into 436236 bytes
• 2018/07/24 13:05:51 58A49F44 h (webif) HTTP Server running. ip=0.0.0.0 port=xxxxx
• 2018/07/24 13:05:53 4B1C619B r (reader) sky_V14 [mouse] ERROR: Opening device /dev/ttyUSB0 (errno=2 No such file or directory)
• 2018/07/24 13:05:53 4B1C619B r (reader) sky_V14 [mouse] Cannot open device: /dev/ttyUSB0
• 2018/07/24 13:05:55 4B1C619B r (reader) sky_V14 [mouse] ERROR: Opening device /dev/ttyUSB0 (errno=2 No such file or directory)
• 2018/07/24 13:05:55 4B1C619B r (reader) sky_V14 [mouse] Cannot open device: /dev/ttyUSB0
• 2018/07/24 13:05:57 4B1C619B r (reader) sky_V14 [mouse] ERROR: Opening device /dev/ttyUSB0 (errno=2 No such file or directory)
• 2018/07/24 13:05:57 4B1C619B r (reader) sky_V14 [mouse] Cannot open device: /dev/ttyUSB0
• 2018/07/24 13:05:59 4B1C619B r (reader) sky_V14 [mouse] ERROR: Opening device /dev/ttyUSB0 (errno=2 No such file or directory)
• 2018/07/24 13:05:59 4B1C619B r (reader) sky_V14 [mouse] Cannot open device: /dev/ttyUSB0
• 2018/07/24 13:06:01 4B1C619B r (reader) sky_V14 [mouse] ERROR: Opening device /dev/ttyUSB0 (errno=2 No such file or directory)
• 2018/07/24 13:06:01 4B1C619B r (reader) sky_V14 [mouse] Cannot open device: /dev/ttyUSB0
• 2018/07/24 13:06:03 4B1C619B r (reader) sky_V14 [mouse] ERROR: Opening device /dev/ttyUSB0 (errno=2 No such file or directory)
• 2018/07/24 13:06:03 4B1C619B r (reader) sky_V14 [mouse] Cannot open device: /dev/ttyUSB0
• 2018/07/24 13:06:05 4B1C619B r (reader) sky_V14 [mouse] ERROR: Opening device /dev/ttyUSB0 (errno=2 No such file or directory)
• 2018/07/24 13:06:05 4B1C619B r (reader) sky_V14 [mouse] Cannot open device: /dev/ttyUSB0
• 2018/07/24 13:06:07 4B1C619B r (reader) sky_V14 [mouse] ERROR: Opening device /dev/ttyUSB0 (errno=2 No such file or directory)
• 2018/07/24 13:06:07 4B1C619B r (reader) sky_V14 [mouse] Cannot open device: /dev/ttyUSB0
• 2018/07/24 13:06:09 4B1C619B r (reader) sky_V14 [mouse] ERROR: Opening device /dev/ttyUSB0 (errno=2 No such file or directory)
• 2018/07/24 13:06:09 4B1C619B r (reader) sky_V14 [mouse] Cannot open device: /dev/ttyUSB0
• 2018/07/24 13:06:11 4B1C619B r (reader) sky_V14 [mouse] ERROR: Opening device /dev/ttyUSB0 (errno=2 No such file or directory)
• 2018/07/24 13:06:11 4B1C619B r (reader) sky_V14 [mouse] Cannot open device: /dev/ttyUSB0
• 2018/07/24 13:06:11 00000000 s (main) init for all local cards done
• 2018/07/24 13:06:11 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
• 2018/07/24 13:06:11 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
• 2018/07/24 13:06:11 00000000 s (anticasc) anti cascading disabled
• 2018/07/24 13:06:11 1BB5320A c (client) encrypted cccam-client 89.12.149.28 granted (Dream, au=auto (9 reader))

 

[axel]

Hi,

• 2018/07/24 13:06:11 4B1C619B r (reader) sky_V14 [mouse] ERROR: Opening device /dev/ttyUSB0 (errno=2 No such file or directory)
• 2018/07/24 13:06:11 4B1C619B r (reader) sky_V14 [mouse] Cannot open device: /dev/ttyUSB0

Da hast Du die Antwort.

Gruß

 

[korsar]

das heißt mouse def.?

 

[axel]

Hi,

gute Frage. versuche mal einen anderen USB-Port.

Du musst das dann noch in der Konfig anpassen.

Gruß

 

[korsar]

habe jetzt mal usb1 in die conf. genommen, der selbe fehler.
wie kann man den internen reader aktivieren?