Easymouse Blinkt die Ganze Zeit nach Neuinstallation

[Crispy666]

Hallo,musste leider mein IPC neu aufsetzen,seitdem blinkt meine Easymouse2 die ganze zeit.Habe die Einstellung von dem alten System übernommen.Kriege aber kein Verbindung zur smartcard
Hier mal meine config.

10-usbadapter.rules

Spoiler

SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{serial}=="AH01B3DF", SYMLINK+="D02"

Oscam.log

Spoiler

2012/07/04 20:44:30 0 s can't open file "/var/etc/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2012/07/04 20:44:30 0 s can't open whitelist file /var/etc/oscam.whitelist
2012/07/04 20:44:30 0 s can't open cacheex-matcher file /var/etc/oscam.cacheex
2012/07/04 20:44:30 0 s Starting listener 0
2012/07/04 20:44:30 0 s monitor: disabled
2012/07/04 20:44:30 0 s Starting listener 0
2012/07/04 20:44:30 0 s camd35: disabled
2012/07/04 20:44:30 0 s Starting listener 0
2012/07/04 20:44:30 0 s cs378x: disabled
2012/07/04 20:44:30 0 s Starting listener 0
2012/07/04 20:44:30 0 s newcamd: disabled
2012/07/04 20:44:30 0 s Starting listener 0
2012/07/04 20:44:30 0 s cccam: initialized (fd=5, port=12939, crypted)
2012/07/04 20:44:30 0 s Starting listener 0
2012/07/04 20:44:30 0 s pandora: disabled
2012/07/04 20:44:30 0 s Starting listener 0
2012/07/04 20:44:30 0 s csp: disabled
2012/07/04 20:44:30 0 s Starting listener 0
2012/07/04 20:44:30 0 s radegast: disabled
2012/07/04 20:44:30 0 s starting thread http
2012/07/04 20:44:30 0 s http thread started
2012/07/04 20:44:30 0 s starting thread reader check
2012/07/04 20:44:30 0 s reader check thread started
2012/07/04 20:44:30 0 s starting thread check
2012/07/04 20:44:30 0 s check thread started
2012/07/04 20:44:30 0 s creating thread for device /dev/D02
2012/07/04 20:44:30 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/07/04 20:44:30 0 s waiting for local card init
2012/07/04 20:44:30 EC2130 h HTTP Server listening on port 8858
2012/07/04 20:44:38 EA21C0 r reader d02 initialized (device=/dev/D02, detect=cd, mhz=600, cardmhz=600)
2012/07/04 20:44:38 EA21C0 r d02 card detected
2012/07/04 20:44:47 EA21C0 r ATR: 9F 21 0E 01
2012/07/04 20:44:47 EA21C0 r ERROR: reader d02 could not read reader->convention
2012/07/04 20:44:47 EA21C0 r Error activating card.
2012/07/04 20:44:52 EA21C0 r ATR: xxxxxxxxxxxxxxxxxxxxxxxxxx
2012/07/04 20:44:52 EA21C0 r ERROR: reader d02 could not read reader->convention
2012/07/04 20:44:52 EA21C0 r Error activating card.
2012/07/04 20:44:59 EA21C0 r ATR: 9F 21 0E 49
2012/07/04 20:44:59 EA21C0 r ERROR: reader d02 could not read reader->convention
2012/07/04 20:44:59 EA21C0 r Error activating card.
2012/07/04 20:45:00 EA21C0 r card initializing error
2012/07/04 20:45:00 0 s init for all local cards done
2012/07/04 20:45:00 0 s anti cascading disabled
2012/07/04 20:45:00 ECA920 c anonymous disconnected from xxxxxxxxxxxxxxxx
2012/07/04 20:45:00 ECA920 c thread 7F131F201700 ended!
2012/07/04 20:45:00 ECC300 c anonymous disconnected from xxxxxxxxxxxxxxxx
2012/07/04 20:45:00 ECC300 c thread 7F131F1F5700 ended!
2012/07/04 20:45:00 EC8F40 c anonymous disconnected from 192.168.2.123
2012/07/04 20:45:00 EC8F40 c thread 7F131F20D700 ended!
2012/07/04 20:45:00 EC7560 c anonymous disconnected from xxxxxxxxxxxxxxxxxxx
2012/07/04 20:45:00 EC7560 c thread 7F131F219700 ended!
2012/07/04 20:45:00 EC5B80 c anonymous disconnected from 192.168.2.123
2012/07/04 20:45:00 EC5B80 c thread 7F131F249700 ended!
2012/07/04 20:45:03 ED6750 c encrypted cccam-client 192.168.2.123 granted (Homeshare, au=auto (1 reader))
2012/07/04 20:45:04 ED9CD0 c encrypted cccam-client 31.16.73.64 granted (xxxx, au=auto (1 reader))
2012/07/04 20:45:25 EC5B80 c encrypted cccam-client 77.64.157.50 granted (xxx, au=auto (1 reader))

oscam.config

Spoiler

[global]
logfile = /var/log/oscam.log
failbantime = 30
failbancount = 3
cachedelay = 20
bindwait = 60
unlockparental = 1
nice = -1
maxlogsize = 5000
preferlocalcards = 1

[monitor]
hideclient_to = 15
appendchaninfo = 1

[webif]
httpport = 8858
httpuser = oscam
httppwd = oscam
httprefresh = 15
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
httpshowpicons = 1

#[dvbapi]
#enabled = 1
#au = 1
#user = Dreambox
#pmt_mode = 0 ]

[cccam]
port = 12939
reshare = 0
ignorereshare = 1
version = 2.1.4
updateinterval = 300
minimizecards = 0
keepconnected = 1
au = 1

oscam.server

Spoiler

[reader]
label = D02
protocol = mouse
device = /dev/D02
caid = 1722,1834
boxkey = 1122334455667788
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,3,2
blockemm-unknown = 1

oscam.user

Spoiler

[account]
user =
pwd =
group = 1
au = 1
betatunnel = 1834.FFFF:1722
cccreshare = 0

[account]
user =
pwd =
group = 1
au = 1
betatunnel = 1834.FFFF:1722
cccreshare = 0

[account]
user =
pwd =
group = 1
au = 1
betatunnel = 1834.FFFF:1722
cccreshare = 0

oscam.services

Spoiler

[kddigifree]
caid = 1834
provid = 000000
srvid = C3BE,D177,D16E,CF77,D04A,D16C,CF09,D09B,CF0C,C761,D10A,C616,D16D,D168,D165,CF76,D171,C75F,D10B,D179,CFDB,D167,CF12,D10D,D10E,D17E,D172,D047,D173,CF17,D176,CF0D,D166,D17B,CF0E,C3B5,D03A,D175,D170,D163,D161,D04D,CF7F,D17A,D174,C60C,D049,D16F,D178,D162,CF0A,C353,C354,CFE3,CF0F,D169,D164,CFE1,CFE0,CF71,CF7A,CF79,CF7B,CFDF,CFE2

[kdhome]
#inkl. Radio!
caid = 1834
provid = 000000
srvid = D03E,C480,D036,D09C,C617,C615,C483,C3B8,C482,C3BF,D035,CF70,D0A4,C3BC,C613,C60F,C60D,C610,C611,CF73,D0A5,D0A3,C481,D099,D16B,C619,C3B7,C47E,C3BD,C4E2,C4E4,C4E8,C4E4,C49A,C419,C41A,C41C,C41E,C41F,C420,C423,C424,C425,C427,C42B,C42D,C42E,C42F,C430,C432,C433,C437,C438,C439,C43A,C43B,C43C,C43F,C441,C442,C443,C445,C446,C447

[kd_home_hd]
caid = 1834
provid = 000000
srvid = C356,C352,C351,C357,C358,C355,C353,C354

[kdprivhd]
caid = 1722,1834
provid = 000000
srvid = C35F,C362,C359,C363,C35A,C365

[kdhomesd]
caid = 1722
provid = 000000
srvid = C614,C618,C47F,C47D,D0A1,C3BA,C3B9,C3BB

#Bei den Kabel Karten hat es sich bewährt, HD und SD Services zu trennen. Best Practice...
[skyall]
#inkl. Sky komplett mit Bulli aber ohne HD!
caid = 1722
provid = 000000
srvid = 000C,000D,000E,0010,0013,0015,0016,0017,0018,001A,001B,001C,001D,0022,0024,002A,0032,0034,00A8,0201,0206,0019,0008,0009,000A,000B,000C,000D,000E,0010,0011,0012,0013,0014,0015,0016,0017,0018,0019,001A,001B,001C,001D,0021,0022,0023,0024,0025,0026,0027,0029,002A,002B,0032,0034,0035,0037,0038,0039,003A,003C,003D,003E,003F,0040,0041,0042,0043,0044,007D,0096,0097,0098,0099,009A,009B,009C,00A8,00DD,00DE,00DF,00FC,00FD,0106,0107,0110,0111,011A,011B,0124,0125,012E,012F,0138,0139,0142,0143,014C,014D,0156,0160,016B,0175,0201,0203,0204,0206,07FF,2EFE,3331,4461,4462,7001,700A,0077,0072,006A,006B,006F,0081,0083,003B,00FC,00DF,0106,0110,011A,0124,012E,0138,0142,014C,0156,0160

[skyhdlokal]
caid = 1834
provid = 000000
srvid = 0071,0070,0082,0084,0083,0081,0072,006F

[skyselect]
caid = 1722,1834
#inkl. Blue Movie etc.
provid = 000000
srvid = 0012,0078,0079,007A,00FB,00FE,0105,0108,010F,0119,0123,012D,0137,0141,014B,0201,0159,0163,016D,0096,0097,0098,0099,009A,009B,009C,0045,0046,003B

 

[Lordduckstein]

AW: Easymouse Blinkt die Ganze Zeit nach Neuinstallation

Hallo Crispy,

oscam.server

Link Removed Spoiler:
​

[reader]
label = D02
protocol = mouse
device = /dev/D02
caid = 1722,1834
boxkey = 1122334455667788
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,3,2
blockemm-unknown = 1







​

[reader]
label = D02
protocol = mouse
device = /dev/ttyUSB0
caid = 1722,1834
boxkey = 1122334455667788
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,3,2
blockemm-unknown = 1

So ist es richtig!

Gruß
Lordi

 

[Crispy666]

AW: Easymouse Blinkt die Ganze Zeit nach Neuinstallation

Hi,leider ist dass nicht der fahl.Immer noch blickende Easymouse!!

gruss

 

[Kermit]

AW: Easymouse Blinkt die Ganze Zeit nach Neuinstallation

Hi,

deine Einstellungen sehen eigentlich gut aus.
Bist du evtl aus Versehen an den Reader gekommen, so dass sich die Dippschalter verstellt haben oder die Karte nicht mehr richtig sitzt?
Ansonsten anderen Reader ausprobieren bzw Karte in Receiver stecken und testen ob diese noch geht.

Grüße

Kermit

 

[Crispy666]

AW: Easymouse Blinkt die Ganze Zeit nach Neuinstallation

Hallo,Dann wird wohl die Easymouse2 defekt sein.Schalter sind alle ok.Im Receiver läuft die Karte.Hier nochmal der oscam.log

Spoiler

2012/07/05 11:51:10 0 s userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
2012/07/05 11:51:10 0 s signal handling initialized (type=sysv)
2012/07/05 11:51:10 0 s 428 service-id's loaded in 1ms
2012/07/05 11:51:10 0 s can't open file "/var/etc/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2012/07/05 11:51:10 0 s can't open file "/var/etc/oscam.provid" (err=2 No such file or directory), no provids's loaded
2012/07/05 11:51:10 0 s can't open file "/var/etc/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2012/07/05 11:51:10 0 s can't open whitelist file /var/etc/oscam.whitelist
2012/07/05 11:51:10 0 s can't open cacheex-matcher file /var/etc/oscam.cacheex
2012/07/05 11:51:10 0 s Starting listener 0
2012/07/05 11:51:10 0 s monitor: disabled
2012/07/05 11:51:10 0 s Starting listener 0
2012/07/05 11:51:10 0 s camd35: disabled
2012/07/05 11:51:10 0 s Starting listener 0
2012/07/05 11:51:10 0 s cs378x: disabled
2012/07/05 11:51:10 0 s Starting listener 0
2012/07/05 11:51:10 0 s newcamd: disabled
2012/07/05 11:51:10 0 s Starting listener 0
2012/07/05 11:51:10 0 s cccam: initialized (fd=5, port=12939, crypted)
2012/07/05 11:51:10 0 s Starting listener 0
2012/07/05 11:51:10 0 s pandora: disabled
2012/07/05 11:51:10 0 s Starting listener 0
2012/07/05 11:51:10 0 s csp: disabled
2012/07/05 11:51:10 0 s Starting listener 0
2012/07/05 11:51:10 0 s radegast: disabled
2012/07/05 11:51:10 0 s starting thread http
2012/07/05 11:51:10 0 s http thread started
2012/07/05 11:51:10 0 s starting thread reader check
2012/07/05 11:51:10 0 s reader check thread started
2012/07/05 11:51:10 0 s starting thread check
2012/07/05 11:51:10 0 s check thread started
2012/07/05 11:51:10 0 s creating thread for device /dev/D02
2012/07/05 11:51:10 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/07/05 11:51:10 0 s waiting for local card init
2012/07/05 11:51:10 1D53BA0 h HTTP Server listening on port 8858
2012/07/05 11:51:13 1D521C0 r reader d02 initialized (device=/dev/D02, detect=cd, mhz=600, cardmhz=600)
2012/07/05 11:51:13 1D521C0 r d02 card detected
2012/07/05 11:51:22 1D521C0 r ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2012/07/05 11:51:23 1D521C0 r Reader d02: Maximum frequency for this card is formally 6 Mhz, clocking it to 6.00 Mhz
2012/07/05 11:51:24 1D521C0 r detect irdeto tunneled nagra card
2012/07/05 11:51:24 1D521C0 r no rsa key configured -> using irdeto mode
2012/07/05 11:51:24 1D521C0 r detect irdeto card
2012/07/05 11:51:24 1D521C0 r caid: 1722, acs: 3.84, country code: TEL
2012/07/05 11:51:24 1D521C0 r providers: 4, ascii serial: 0511276584, hex serial: 797628, hex base: 1A
2012/07/05 11:51:27 1D521C0 r active providers: 2 (000000,000000)
2012/07/05 11:51:27 1D521C0 r found cardsystem irdeto
2012/07/05 11:51:30 0 s init for all local cards done
2012/07/05 11:51:30 0 s anti cascading disabled
2012/07/05 11:51:30 1D776E0 c anonymous disconnected from xxxxxxxxxx
2012/07/05 11:51:30 1D776E0 c thread 7F946FE4F700 ended!
2012/07/05 11:51:30 1D75D00 c anonymous disconnected from xxxxxxxxxxx
2012/07/05 11:51:30 1D75D00 c thread 7F946FE5B700 ended!
2012/07/05 11:51:30 1D791E0 c encrypted cccam-client xxxxxx granted (xxx, au=auto (1 reader))
2012/07/05 11:51:58 1D75D00 c encrypted cccam-client xxxxxx granted (xxx, au=auto (1 reader))

 

[Alex]

AW: Easymouse Blinkt die Ganze Zeit nach Neuinstallation

Hatte das Problem mal nach nem Stromausfall. Lass die Easymouse mal ne weile Stromlos, dann sollte sie wieder gehn.
Sonst sieht dein Config ja gu aus.

 

[Crispy666]

AW: Easymouse Blinkt die Ganze Zeit nach Neuinstallation

Hallo,Leider hat das auch nichts gebracht^^.habe mir eine neue Bestellt.Danke für eure antworten!!

mfg

 

[Crispy666]

AW: Easymouse Blinkt die Ganze Zeit nach Neuinstallation

Hallo,habe jetzt eine neue Easymouse2 und trotzdem immer noch den Fehler.Habe auch schon IPC neu aufgesetzt leider ohne Erfolg,Meine Einstellungen habe ich nicht verändert.Hier mal mein oscam.log.Hoffe mir kann jemand weiter helfen??

oscam.log

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Thu Jul 19 18:43:20 2012
-------------------------------------------------------------------------------
2012/07/19 18:43:20 0 s starting thread log_list_thread
2012/07/19 18:43:20 0 s log_list_thread thread started
2012/07/19 18:43:20 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #7188 (x86_64-linux-gnu)
2012/07/19 18:43:20 0 s version=1.20-unstable_svn, build #7188, system=x86_64-linux-gnu, nice=-1
2012/07/19 18:43:20 0 s client max. idle=120 sec, debug level=0, filter_sensitive=1
2012/07/19 18:43:20 0 s max. logsize=5000 Kb, loghistorysize=4096 bytes
2012/07/19 18:43:20 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=20 ms
2012/07/19 18:43:20 0 s services reloaded: 0 services freed, 8 services loaded, rejected 0
2012/07/19 18:43:20 0 s userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
2012/07/19 18:43:20 0 s signal handling initialized (type=sysv)
2012/07/19 18:43:20 0 s can't open file "/var/etc/oscam.srvid" (err=2 No such file or directory), no service-id's loaded
2012/07/19 18:43:20 0 s can't open file "/var/etc/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2012/07/19 18:43:20 0 s can't open file "/var/etc/oscam.provid" (err=2 No such file or directory), no provids's loaded
2012/07/19 18:43:20 0 s can't open file "/var/etc/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2012/07/19 18:43:20 0 s can't open whitelist file /var/etc/oscam.whitelist
2012/07/19 18:43:20 0 s can't open cacheex-matcher file /var/etc/oscam.cacheex
2012/07/19 18:43:20 0 s Starting listener 0
2012/07/19 18:43:20 0 s monitor: disabled
2012/07/19 18:43:20 0 s Starting listener 0
2012/07/19 18:43:20 0 s camd35: disabled
2012/07/19 18:43:20 0 s Starting listener 0
2012/07/19 18:43:20 0 s cs378x: disabled
2012/07/19 18:43:20 0 s Starting listener 0
2012/07/19 18:43:20 0 s newcamd: disabled
2012/07/19 18:43:20 0 s Starting listener 0
2012/07/19 18:43:20 0 s cccam: initialized (fd=5, port=12939, crypted)
2012/07/19 18:43:20 0 s Starting listener 0
2012/07/19 18:43:20 0 s pandora: disabled
2012/07/19 18:43:20 0 s Starting listener 0
2012/07/19 18:43:20 0 s csp: disabled
2012/07/19 18:43:20 0 s Starting listener 0
2012/07/19 18:43:20 0 s radegast: disabled
2012/07/19 18:43:20 0 s starting thread http
2012/07/19 18:43:20 0 s http thread started
2012/07/19 18:43:20 0 s starting thread reader check
2012/07/19 18:43:20 0 s reader check thread started
2012/07/19 18:43:20 0 s starting thread check
2012/07/19 18:43:20 0 s check thread started
2012/07/19 18:43:20 0 s d02 [mouse] creating thread for device /dev/D02
2012/07/19 18:43:20 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/07/19 18:43:20 0 s waiting for local card init
2012/07/19 18:43:20 994230 h HTTP Server listening on port 8858
2012/07/19 18:43:22 98BA80 r d02 [mouse] Reader initialized (device=/dev/D02, detect=cd, mhz=600, cardmhz=600)
2012/07/19 18:43:23 98BA80 r d02 [mouse] card detected
2012/07/19 18:43:32 98BA80 r d02 [mouse] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2012/07/19 18:43:33 98BA80 r d02 [mouse] Maximum frequency for this card is formally 6 Mhz, clocking it to 6.00 Mhz
2012/07/19 18:43:34 98BA80 r d02 [mouse] detect irdeto tunneled nagra card
2012/07/19 18:43:34 98BA80 r d02 [mouse] no rsa key configured -> using irdeto mode
2012/07/19 18:43:34 98BA80 r d02 [mouse] detect irdeto card
2012/07/19 18:43:34 98BA80 r d02 [mouse] caid: 1722, acs: 3.84, country code: TEL
2012/07/19 18:43:34 98BA80 r d02 [mouse] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2012/07/19 18:43:46 98BA80 r d02 [mouse] card system not supported
2012/07/19 18:43:46 98BA80 r d02 [mouse] Normal mode failed, reverting to Deprecated Mode
2012/07/19 18:43:52 98BA80 r d02 [mouse] ATR: 3B 01 01
2012/07/19 18:43:55 98BA80 r d02 [mouse] Maximum frequency for this card is formally 5 Mhz, clocking it to 6.00 Mhz
2012/07/19 18:43:56 98BA80 r d02 [mouse] ATR_len=3 but ATR is unknown: 3B 01 01
2012/07/19 18:43:56 98BA80 r d02 [mouse] card system not supported
2012/07/19 18:43:56 98BA80 r d02 [mouse] card initializing error
2012/07/19 18:43:57 0 s init for all local cards done
2012/07/19 18:43:57 0 s anti cascading disabled
2012/07/19 18:43:57 99A240 c anonymous disconnected from xxxxxxxxxxx
2012/07/19 18:43:57 99A240 c thread 7F135F24B700 ended!
2012/07/19 18:43:57 998860 c anonymous disconnected from xxxxxxxxxxx
2012/07/19 18:43:57 998860 c thread 7F135F27E700 ended!
2012/07/19 18:43:58 99F1C0 c encrypted cccam-client xxxxxxx granted (xxxxxxx, au=auto (1 reader))