hallo eigentlich läuft das sharen ganz gut nur haben die beiden clients häufiger freezer und müssen neu starten
server ist eine dm8000 mit merlin 3 oe 2.0 oscam 7884 die clients laufen mit cccam 2.3 kann man die freezer irgendwie verhindern oder die einstellung optimieren ich habe neben conf, user und server noch srvid, und provid am laufen ist es sinnvoll die nicht zu benutzen bzw welche dateien sind sinnvoll bzw unsinnig.
wäre für tips dankbar und poste hier meine dateien
zunächste meine dream
conf
server
user
cline bsp
C: xxx.no-ip.org 34123 1 1
gestern gegen 20.40 hat sich einer der clients gemeldet es würde hängen hab hier in den logs ne datei messages gefunden
was um die zeit etwa passierte hab ich hier mal reinkopiert vielleicht findet jeamand etwas nützliches
danke
server ist eine dm8000 mit merlin 3 oe 2.0 oscam 7884 die clients laufen mit cccam 2.3 kann man die freezer irgendwie verhindern oder die einstellung optimieren ich habe neben conf, user und server noch srvid, und provid am laufen ist es sinnvoll die nicht zu benutzen bzw welche dateien sind sinnvoll bzw unsinnig.
wäre für tips dankbar und poste hier meine dateien
zunächste meine dream
conf
[global]
logfile = /var/log/oscam.log
cachedelay = 120
nice = -1
maxlogsize = 200
preferlocalcards = 1
block_same_ip = 1
block_same_name = 1
fallbacktimeout = 2500
[monitor]
port = 988
nocrypt = 0.0.0.0-255.255.255.255
aulow = 120
monlevel = 4appendchaninfo = 1
[cccam]
port = ???
reshare = 1
ignorereshare = 0
version = 2.3.0
keepconnected = 1
[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = server
[webif]
httpport = ???
httphelplang = de
httpuser = user
httppwd = pass
httprefresh = 10
httpallowed = 127.0.0.1,0.0.0.0-192.168.255.255
logfile = /var/log/oscam.log
cachedelay = 120
nice = -1
maxlogsize = 200
preferlocalcards = 1
block_same_ip = 1
block_same_name = 1
fallbacktimeout = 2500
[monitor]
port = 988
nocrypt = 0.0.0.0-255.255.255.255
aulow = 120
monlevel = 4appendchaninfo = 1
[cccam]
port = ???
reshare = 1
ignorereshare = 0
version = 2.3.0
keepconnected = 1
[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = server
[webif]
httpport = ???
httphelplang = de
httpuser = user
httppwd = pass
httprefresh = 10
httpallowed = 127.0.0.1,0.0.0.0-192.168.255.255
[reader]
label = skydev13
protocol = internal
device = /dev/sci0
caid = 09C4
boxid = 12345678
ins7e11 = 15
ndsversion = 2
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
label = skydev13
protocol = internal
device = /dev/sci0
caid = 09C4
boxid = 12345678
ins7e11 = 15
ndsversion = 2
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
[account]
user = server
caid = 09C4
failban = 1
au = 1
group = 1
cccignorereshare = 1
[account]
user = 1
pwd = 1
caid = 09C4
failban = 8
monlevel = 4
keepalive = 1
au = 1
group = 1
cccreshare = 0
cccignorereshare = 0
[account]
user = 2
pwd = 2
caid = 09C4
failban = 8
keepalive = 1
au = 1
group = 1
user = server
caid = 09C4
failban = 1
au = 1
group = 1
cccignorereshare = 1
[account]
user = 1
pwd = 1
caid = 09C4
failban = 8
monlevel = 4
keepalive = 1
au = 1
group = 1
cccreshare = 0
cccignorereshare = 0
[account]
user = 2
pwd = 2
caid = 09C4
failban = 8
keepalive = 1
au = 1
group = 1
C: xxx.no-ip.org 34123 1 1
gestern gegen 20.40 hat sich einer der clients gemeldet es würde hängen hab hier in den logs ne datei messages gefunden
was um die zeit etwa passierte hab ich hier mal reinkopiert vielleicht findet jeamand etwas nützliches
danke
Dec 17 20:34:37 dm8000 user.warn kernel: [433746.421000] VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
Dec 17 20:34:37 dm8000 user.warn kernel: [433746.534000] set current avs auto aspect to 16:9
Dec 17 20:34:37 dm8000 user.warn kernel: [433746.535000] disable wss on display 0
Dec 17 20:34:37 dm8000 user.warn kernel: [433746.535000] set wss 7 on display 1
Dec 17 20:34:37 dm8000 user.warn kernel: [433746.535000] set sb to 3(1)
Dec 17 20:34:39 dm8000 user.warn kernel: [433748.177000] stop pcr0 on dmx 3 pid:2ff
Dec 17 20:34:39 dm8000 user.warn kernel: [433748.178000] stop video0 on dmx 3 pid:2ff
Dec 17 20:34:39 dm8000 user.warn kernel: [433748.182000] VIDEO0: stop decode
Dec 17 20:34:39 dm8000 user.warn kernel: [433748.183000] VIDEO0: set blank to 1
Dec 17 20:34:39 dm8000 user.warn kernel: [433748.184000] audio: decoder stop
Dec 17 20:34:39 dm8000 user.warn kernel: [433748.202000] stop audio on dmx 3 pid:303
Dec 17 20:34:39 dm8000 user.warn kernel: [433748.202000] audio: xpt stop(3)
Dec 17 20:34:39 dm8000 user.warn kernel: [433748.202000] no decoder left in sync handling so disable xpt_sync
Dec 17 20:34:39 dm8000 user.warn kernel: [433748.202000] bcm_audio_channel_stop(3) done
Dec 17 20:34:39 dm8000 user.warn kernel: [433748.664000] start pcr0 on dmx 3 pid:1ff index 5
Dec 17 20:34:39 dm8000 user.warn kernel: [433748.666000] start audio on dmx 3 pid:203
Dec 17 20:34:39 dm8000 user.warn kernel: [433748.666000] audio xpt start
Dec 17 20:34:39 dm8000 user.warn kernel: [433748.666000] sync is off so we enable it
Dec 17 20:34:39 dm8000 user.warn kernel: [433748.666000] demux-index 3 pcr0pid 1ff
Dec 17 20:34:39 dm8000 user.warn kernel: [433748.666000] using 5 as pcr0 pidchannel
Dec 17 20:34:39 dm8000 user.warn kernel: [433748.666000] AC3
Dec 17 20:34:39 dm8000 user.warn kernel: [433748.668000] audio: decoder start 0
Dec 17 20:34:39 dm8000 user.warn kernel: [433748.679000] audio delay 18000 (200 ms)
Dec 17 20:34:39 dm8000 user.warn kernel: [433748.679000] total video delay: 18000 (200 ms)
Dec 17 20:34:39 dm8000 user.warn kernel: [433748.682000] start video0 on dmx 3 pid:1ff
Dec 17 20:34:39 dm8000 user.warn kernel: [433748.682000] total video delay: 18000 (200 ms)
Dec 17 20:34:39 dm8000 user.warn kernel: [433748.683000] VIDEO0: start decode
Dec 17 20:34:41 dm8000 user.warn kernel: [433749.513000] ch0: lock
Dec 17 20:34:41 dm8000 user.warn kernel: [433749.513000] RAP first pts 0xb9de2f26, stc 0x61a9a314, pcr valid
Dec 17 20:34:41 dm8000 user.warn kernel: [433749.513000] RAP pts error 0 PTS 0x5cef1793, STC 0x30d4d18c, type 0
Dec 17 20:34:41 dm8000 user.warn kernel: [433749.544000] ch0: lock
Dec 17 20:34:41 dm8000 user.warn kernel: [433749.544000] RAP pts error 0 PTS 0x5cef1793, STC 0x30d4d6ea, type 1
Dec 17 20:34:41 dm8000 user.warn kernel: [433749.577000] ch0: lock
Dec 17 20:34:41 dm8000 user.warn kernel: [433749.577000] RAP pts error 0 PTS 0x5cef1793, STC 0x30d4dccf, type 1
Dec 17 20:34:41 dm8000 user.warn kernel: [433749.606000] ch0: lock
Dec 17 20:34:41 dm8000 user.warn kernel: [433749.908000] RAP sampling rate info isr
Dec 17 20:34:42 dm8000 user.warn kernel: [433750.315000] stop pcr0 on dmx 3 pid:1ff
Dec 17 20:34:42 dm8000 user.warn kernel: [433750.316000] stop video0 on dmx 3 pid:1ff
Dec 17 20:34:42 dm8000 user.warn kernel: [433750.316000] VIDEO0 use saved pts 0x1a04d0a72 (ret 0)
Dec 17 20:34:42 dm8000 user.warn kernel: [433750.317000] VIDEO0: stop decode
Dec 17 20:34:42 dm8000 user.warn kernel: [433750.317000] VIDEO0: set blank to 1
Dec 17 20:34:42 dm8000 user.warn kernel: [433750.318000] audio: decoder stop
Dec 17 20:34:42 dm8000 user.warn kernel: [433750.334000] stop audio on dmx 3 pid:203
Dec 17 20:34:42 dm8000 user.warn kernel: [433750.334000] audio: xpt stop(3)
Dec 17 20:34:42 dm8000 user.warn kernel: [433750.334000] no decoder left in sync handling so disable xpt_sync
Dec 17 20:34:42 dm8000 user.warn kernel: [433750.334000] bcm_audio_channel_stop(3) done
Dec 17 20:34:42 dm8000 user.warn kernel: [433750.841000] start pcr0 on dmx 3 pid:3ff index 5
Dec 17 20:34:42 dm8000 user.warn kernel: [433750.843000] start audio on dmx 3 pid:403
Dec 17 20:34:42 dm8000 user.warn kernel: [433750.843000] audio xpt start
Dec 17 20:34:42 dm8000 user.warn kernel: [433750.843000] sync is off so we enable it
Dec 17 20:34:42 dm8000 user.warn kernel: [433750.843000] demux-index 3 pcr0pid 3ff
Dec 17 20:34:42 dm8000 user.warn kernel: [433750.843000] using 5 as pcr0 pidchannel
Dec 17 20:34:42 dm8000 user.warn kernel: [433750.844000] AC3
Dec 17 20:34:42 dm8000 user.warn kernel: [433750.845000] audio: decoder start 0
Dec 17 20:34:42 dm8000 user.warn kernel: [433750.856000] audio delay 18000 (200 ms)
Dec 17 20:34:42 dm8000 user.warn kernel: [433750.856000] total video delay: 18000 (200 ms)
Dec 17 20:34:42 dm8000 user.warn kernel: [433750.858000] start video0 on dmx 3 pid:3ff
Dec 17 20:34:42 dm8000 user.warn kernel: [433750.858000] total video delay: 18000 (200 ms)
Dec 17 20:34:42 dm8000 user.warn kernel: [433750.860000] VIDEO0: start decode
Dec 17 20:34:43 dm8000 user.warn kernel: [433751.415000] ch0: lock
Dec 17 20:34:43 dm8000 user.warn kernel: [433751.416000] RAP first pts 0xfa601526, stc 0x10883b74, pcr valid
Dec 17 20:34:43 dm8000 user.warn kernel: [433751.416000] RAP pts error 0 PTS 0x7d300a93, STC 0x08441dbc, type 0
Dec 17 20:34:43 dm8000 user.warn kernel: [433751.446000] ch0: lock
Dec 17 20:34:43 dm8000 user.warn kernel: [433751.446000] RAP pts error 0 PTS 0x7d300a93, STC 0x0844231b, type 1
Dec 17 20:34:43 dm8000 user.warn kernel: [433751.480000] ch0: lock
Dec 17 20:34:43 dm8000 user.warn kernel: [433751.480000] RAP pts error 0 PTS 0x7d300a93, STC 0x08442905, type 1
Dec 17 20:34:43 dm8000 user.warn kernel: [433751.510000] ch0: lock
Dec 17 20:34:43 dm8000 user.warn kernel: [433751.639000] stop pcr0 on dmx 3 pid:3ff
Dec 17 20:34:43 dm8000 user.warn kernel: [433751.640000] stop video0 on dmx 3 pid:3ff
Dec 17 20:34:43 dm8000 user.warn kernel: [433751.640000] VIDEO0 use saved pts 0x1a04d0a72 (ret 0)
Dec 17 20:34:43 dm8000 user.warn kernel: [433751.641000] VIDEO0: stop decode
Dec 17 20:34:43 dm8000 user.warn kernel: [433751.641000] VIDEO0: set blank to 1
Dec 17 20:34:43 dm8000 user.warn kernel: [433751.642000] audio: decoder stop
Dec 17 20:34:43 dm8000 user.warn kernel: [433751.660000] stop audio on dmx 3 pid:403
Dec 17 20:34:43 dm8000 user.warn kernel: [433751.660000] audio: xpt stop(3)
Dec 17 20:34:43 dm8000 user.warn kernel: [433751.660000] no decoder left in sync handling so disable xpt_sync
Dec 17 20:34:43 dm8000 user.warn kernel: [433751.660000] bcm_audio_channel_stop(3) done
Dec 17 20:34:45 dm8000 user.warn kernel: [433753.483000] start pcr0 on dmx 3 pid:3ff index 5
Dec 17 20:34:45 dm8000 user.warn kernel: [433753.485000] start audio on dmx 3 pid:403
Dec 17 20:34:45 dm8000 user.warn kernel: [433753.485000] audio xpt start
Dec 17 20:34:45 dm8000 user.warn kernel: [433753.485000] sync is off so we enable it
Dec 17 20:34:45 dm8000 user.warn kernel: [433753.485000] demux-index 3 pcr0pid 3ff
Dec 17 20:34:45 dm8000 user.warn kernel: [433753.485000] using 5 as pcr0 pidchannel
Dec 17 20:34:45 dm8000 user.warn kernel: [433753.485000] AC3
Dec 17 20:34:45 dm8000 user.warn kernel: [433753.486000] audio: decoder start 0
Dec 17 20:34:45 dm8000 user.warn kernel: [433753.497000] audio delay 18000 (200 ms)
Dec 17 20:34:45 dm8000 user.warn kernel: [433753.497000] total video delay: 18000 (200 ms)
Dec 17 20:34:45 dm8000 user.warn kernel: [433753.499000] start video0 on dmx 3 pid:3ff
Dec 17 20:34:45 dm8000 user.warn kernel: [433753.499000] total video delay: 18000 (200 ms)
Dec 17 20:34:45 dm8000 user.warn kernel: [433753.501000] VIDEO0: start decode
Dec 17 20:34:45 dm8000 user.warn kernel: [433753.690000] stop pcr0 on dmx 3 pid:3ff
Dec 17 20:34:45 dm8000 user.warn kernel: [433753.691000] stop video0 on dmx 3 pid:3ff
Dec 17 20:34:45 dm8000 user.warn kernel: [433753.691000] VIDEO0 use saved pts 0x1a04d0a72 (ret 0)
Dec 17 20:34:45 dm8000 user.warn kernel: [433753.692000] VIDEO0: stop decode
Dec 17 20:34:45 dm8000 user.warn kernel: [433753.692000] VIDEO0: set blank to 1
Dec 17 20:34:45 dm8000 user.warn kernel: [433753.693000] bcm_audio: use saved pts 0x10886488 (0x0) (ret 0)
Dec 17 20:34:45 dm8000 user.warn kernel: [433753.693000] audio: decoder stop
Dec 17 20:34:45 dm8000 user.warn kernel: [433753.709000] stop audio on dmx 3 pid:403
Dec 17 20:34:45 dm8000 user.warn kernel: [433753.709000] audio: xpt stop(3)
Dec 17 20:34:45 dm8000 user.warn kernel: [433753.709000] no decoder left in sync handling so disable xpt_sync
Dec 17 20:34:45 dm8000 user.warn kernel: [433753.709000] bcm_audio_channel_stop(3) done
Dec 17 20:34:46 dm8000 user.warn kernel: [433754.195000] start pcr0 on dmx 3 pid:1ff index 5
Dec 17 20:34:46 dm8000 user.warn kernel: [433754.198000] start audio on dmx 3 pid:203
Dec 17 20:34:46 dm8000 user.warn kernel: [433754.198000] audio xpt start
Dec 17 20:34:46 dm8000 user.warn kernel: [433754.198000] sync is off so we enable it
Dec 17 20:34:46 dm8000 user.warn kernel: [433754.198000] demux-index 3 pcr0pid 1ff
Dec 17 20:34:46 dm8000 user.warn kernel: [433754.199000] using 5 as pcr0 pidchannel
Dec 17 20:34:46 dm8000 user.warn kernel: [433754.199000] AC3
Dec 17 20:34:46 dm8000 user.warn kernel: [433754.200000] audio: decoder start 0
Dec 17 20:34:46 dm8000 user.warn kernel: [433754.211000] audio delay 18000 (200 ms)
Dec 17 20:34:46 dm8000 user.warn kernel: [433754.211000] total video delay: 18000 (200 ms)
Dec 17 20:34:46 dm8000 user.warn kernel: [433754.213000] start video0 on dmx 3 pid:1ff
Dec 17 20:34:46 dm8000 user.warn kernel: [433754.213000] total video delay: 18000 (200 ms)
Dec 17 20:34:46 dm8000 user.warn kernel: [433754.215000] VIDEO0: start decode
Dec 17 20:34:46 dm8000 user.warn kernel: [433754.742000] stop pcr0 on dmx 3 pid:1ff
Dec 17 20:34:46 dm8000 user.warn kernel: [433754.743000] stop video0 on dmx 3 pid:1ff
Dec 17 20:34:46 dm8000 user.warn kernel: [433754.743000] VIDEO0 use saved pts 0x1a04d0a72 (ret 0)
Dec 17 20:34:46 dm8000 user.warn kernel: [433754.744000] VIDEO0: stop decode
Dec 17 20:34:46 dm8000 user.warn kernel: [433754.745000] VIDEO0: set blank to 1
Dec 17 20:34:46 dm8000 user.warn kernel: [433754.747000] bcm_audio: use saved pts 0x10886488 (0x0) (ret 0)
Dec 17 20:34:46 dm8000 user.warn kernel: [433754.747000] audio: decoder stop
Dec 17 20:34:46 dm8000 user.warn kernel: [433754.764000] stop audio on dmx 3 pid:203
Dec 17 20:34:46 dm8000 user.warn kernel: [433754.764000] audio: xpt stop(3)
Dec 17 20:34:46 dm8000 user.warn kernel: [433754.764000] no decoder left in sync handling so disable xpt_sync
Dec 17 20:34:46 dm8000 user.warn kernel: [433754.764000] bcm_audio_channel_stop(3) done
Dec 17 20:34:47 dm8000 user.warn kernel: [433755.247000] start pcr0 on dmx 3 pid:2ff index 5
Dec 17 20:34:47 dm8000 user.warn kernel: [433755.249000] start audio on dmx 3 pid:303
Dec 17 20:34:47 dm8000 user.warn kernel: [433755.249000] audio xpt start
Dec 17 20:34:47 dm8000 user.warn kernel: [433755.249000] sync is off so we enable it
Dec 17 20:34:47 dm8000 user.warn kernel: [433755.249000] demux-index 3 pcr0pid 2ff
Dec 17 20:34:47 dm8000 user.warn kernel: [433755.249000] using 5 as pcr0 pidchannel
Dec 17 20:34:47 dm8000 user.warn kernel: [433755.249000] AC3
Dec 17 20:34:47 dm8000 user.warn kernel: [433755.251000] audio: decoder start 0
Dec 17 20:34:47 dm8000 user.warn kernel: [433755.262000] audio delay 18000 (200 ms)
Dec 17 20:34:47 dm8000 user.warn kernel: [433755.262000] total video delay: 18000 (200 ms)
Dec 17 20:34:47 dm8000 user.warn kernel: [433755.264000] start video0 on dmx 3 pid:2ff
Dec 17 20:34:47 dm8000 user.warn kernel: [433755.264000] total video delay: 18000 (200 ms)
Dec 17 20:34:47 dm8000 user.warn kernel: [433755.265000] VIDEO0: start decode
Dec 17 20:34:48 dm8000 user.warn kernel: [433756.006000] ch0: lock
Dec 17 20:34:48 dm8000 user.warn kernel: [433756.006000] RAP first pts 0x16790eda6, stc 0x1a05827c0, pcr valid
Dec 17 20:34:48 dm8000 user.warn kernel: [433756.006000] RAP pts error 0 PTS 0xb3c876d3, STC 0xd02c13e2, type 0
Dec 17 20:34:48 dm8000 user.warn kernel: [433756.041000] ch0: lock
Dec 17 20:34:48 dm8000 user.warn kernel: [433756.041000] RAP pts error 0 PTS 0xb3c876d3, STC 0xd02c1a10, type 1
Dec 17 20:34:48 dm8000 user.warn kernel: [433756.072000] ch0: lock
Dec 17 20:34:48 dm8000 user.warn kernel: [433756.072000] RAP pts error 0 PTS 0xb3c876d3, STC 0xd02c1f94, type 1
Dec 17 20:34:48 dm8000 user.warn kernel: [433756.106000] ch0: lock
Dec 17 20:34:48 dm8000 user.warn kernel: [433756.106000] RAP pts error 0 PTS 0xb3c876d3, STC 0xd02c257d, type 1
Dec 17 20:34:48 dm8000 user.warn kernel: [433756.135000] ch0: lock
Dec 17 20:34:48 dm8000 user.warn kernel: [433756.400000] VIDEO0: first pts 0x1a05a8dd2
Dec 17 20:34:48 dm8000 user.warn kernel: [433756.437000] RAP sampling rate info isr
Dec 17 20:34:48 dm8000 user.warn kernel: [433756.550000] enable tsm0
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.194000] stop pcr0 on dmx 3 pid:2ff
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.194000] stop video0 on dmx 3 pid:2ff
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.195000] VIDEO0: stop decode
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.196000] VIDEO0: set blank to 1
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.197000] audio: decoder stop
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.213000] stop audio on dmx 3 pid:303
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.213000] audio: xpt stop(3)
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.213000] no decoder left in sync handling so disable xpt_sync
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.213000] bcm_audio_channel_stop(3) done
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.690000] start pcr0 on dmx 3 pid:13ed index 5
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.692000] start audio on dmx 3 pid:13f2
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.692000] audio xpt start
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.692000] sync is off so we enable it
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.692000] demux-index 3 pcr0pid 13ed
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.692000] using 5 as pcr0 pidchannel
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.692000] AC3
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.694000] audio: decoder start 0
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.705000] audio delay 18000 (200 ms)
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.705000] total video delay: 18000 (200 ms)
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.707000] start video0 on dmx 3 pid:13ed
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.707000] total video delay: 18000 (200 ms)
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.709000] VIDEO0: start decode
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.727000] ch0: lock
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.758000] ch0: lock
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.794000] ch0: lock
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.820000] ch0: lock
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.820000] RAP first pts 0x7030da54, stc 0x7030ce74, pcr valid
Dec 17 20:34:54 dm8000 user.warn kernel: [433763.133000] RAP sampling rate info isr
Dec 17 20:34:53 dm8000 user.warn kernel: [433763.360000] VIDEO0: first pts 0x70325c90
Dec 17 20:34:53 dm8000 user.warn kernel: [433763.360000] VIDEO0: framerate changed 6
Dec 17 20:34:53 dm8000 user.warn kernel: [433763.360000] VIDEO0: resolution changed (1280 720)
Dec 17 20:34:53 dm8000 user.warn kernel: [433763.361000] set current avs auto aspect to 16:9
Dec 17 20:34:53 dm8000 user.warn kernel: [433763.361000] disable wss on display 0
Dec 17 20:34:53 dm8000 user.warn kernel: [433763.361000] set wss 7 on display 1
Dec 17 20:34:53 dm8000 user.warn kernel: [433763.361000] set sb to 3(1)
Dec 17 20:34:53 dm8000 user.warn kernel: [433763.511000] enable tsm0
Dec 17 20:34:53 dm8000 user.warn kernel: [433763.720000] VIDEO0: progressive changed (1)
Dec 17 20:34:55 dm8000 user.warn kernel: [433765.606000] stop pcr0 on dmx 3 pid:13ed
Dec 17 20:34:55 dm8000 user.warn kernel: [433765.607000] stop video0 on dmx 3 pid:13ed
Dec 17 20:34:55 dm8000 user.warn kernel: [433765.613000] VIDEO0: stop decode
Dec 17 20:34:55 dm8000 user.warn kernel: [433765.613000] VIDEO0: set blank to 1
Dec 17 20:34:55 dm8000 user.warn kernel: [433765.615000] audio: decoder stop
Dec 17 20:34:55 dm8000 user.warn kernel: [433765.632000] stop audio on dmx 3 pid:13f2
Dec 17 20:34:55 dm8000 user.warn kernel: [433765.632000] audio: xpt stop(3)
Dec 17 20:34:55 dm8000 user.warn kernel: [433765.632000] no decoder left in sync handling so disable xpt_sync
Dec 17 20:34:55 dm8000 user.warn kernel: [433765.632000] bcm_audio_channel_stop(3) done
Dec 17 20:34:56 dm8000 user.warn kernel: [433766.106000] start pcr0 on dmx 3 pid:17de index 5
Dec 17 20:34:56 dm8000 user.warn kernel: [433766.107000] start audio on dmx 3 pid:17ea
Dec 17 20:34:56 dm8000 user.warn kernel: [433766.108000] audio xpt start
Dec 17 20:34:56 dm8000 user.warn kernel: [433766.108000] sync is off so we enable it
Dec 17 20:34:56 dm8000 user.warn kernel: [433766.108000] demux-index 3 pcr0pid 17de
Dec 17 20:34:56 dm8000 user.warn kernel: [433766.108000] using 5 as pcr0 pidchannel
Dec 17 20:34:56 dm8000 user.warn kernel: [433766.108000] AC3
Dec 17 20:34:56 dm8000 user.warn kernel: [433766.109000] audio: decoder start 0
Dec 17 20:34:56 dm8000 user.warn kernel: [433766.120000] audio delay 18000 (200 ms)
Dec 17 20:34:56 dm8000 user.warn kernel: [433766.120000] total video delay: 18000 (200 ms)
Dec 17 20:34:56 dm8000 user.warn kernel: [433766.122000] start video0 on dmx 3 pid:17de
Dec 17 20:34:56 dm8000 user.warn kernel: [433766.122000] total video delay: 18000 (200 ms)
Dec 17 20:34:56 dm8000 user.warn kernel: [433766.125000] VIDEO0: start decode
Dec 17 20:34:56 dm8000 user.warn kernel: [433766.167000] ch0: lock
Dec 17 20:34:56 dm8000 user.warn kernel: [433766.167000] RAP first pts 0x1b02fceec, stc 0x1b02fc75c, pcr valid
Dec 17 20:34:56 dm8000 user.warn kernel: [433766.468000] RAP sampling rate info isr
Dec 17 20:34:57 dm8000 user.warn kernel: [433767.140000] VIDEO0: first pts 0x1b0319c00
Dec 17 20:34:57 dm8000 user.warn kernel: [433767.291000] enable tsm0
Dec 17 20:34:59 dm8000 user.warn kernel: [433769.090000] stop pcr0 on dmx 3 pid:17de
Dec 17 20:34:59 dm8000 user.warn kernel: [433769.090000] stop video0 on dmx 3 pid:17de
Dec 17 20:34:59 dm8000 user.warn kernel: [433769.091000] VIDEO0: stop decode
Dec 17 20:34:59 dm8000 user.warn kernel: [433769.092000] VIDEO0: set blank to 1
Dec 17 20:34:59 dm8000 user.warn kernel: [433769.093000] audio: decoder stop
Dec 17 20:34:59 dm8000 user.warn kernel: [433769.109000] stop audio on dmx 3 pid:17ea
Dec 17 20:34:59 dm8000 user.warn kernel: [433769.109000] audio: xpt stop(3)
Dec 17 20:34:59 dm8000 user.warn kernel: [433769.109000] no decoder left in sync handling so disable xpt_sync
Dec 17 20:34:59 dm8000 user.warn kernel: [433769.109000] bcm_audio_channel_stop(3) done
Dec 17 20:34:59 dm8000 user.warn kernel: [433769.617000] start pcr0 on dmx 3 pid:ff index 5
Dec 17 20:34:59 dm8000 user.warn kernel: [433769.619000] start audio on dmx 3 pid:103
Dec 17 20:34:59 dm8000 user.warn kernel: [433769.619000] audio xpt start
Dec 17 20:34:59 dm8000 user.warn kernel: [433769.619000] sync is off so we enable it
Dec 17 20:34:59 dm8000 user.warn kernel: [433769.619000] demux-index 3 pcr0pid ff
Dec 17 20:34:59 dm8000 user.warn kernel: [433769.619000] using 5 as pcr0 pidchannel
Dec 17 20:34:59 dm8000 user.warn kernel: [433769.619000] AC3
Dec 17 20:34:59 dm8000 user.warn kernel: [433769.621000] audio: decoder start 0
Dec 17 20:34:59 dm8000 user.warn kernel: [433769.632000] audio delay 18000 (200 ms)
Dec 17 20:34:59 dm8000 user.warn kernel: [433769.632000] total video delay: 18000 (200 ms)
Dec 17 20:34:59 dm8000 user.warn kernel: [433769.634000] start video0 on dmx 3 pid:ff
Dec 17 20:34:59 dm8000 user.warn kernel: [433769.634000] total video delay: 18000 (200 ms)
Dec 17 20:34:59 dm8000 user.warn kernel: [433769.636000] VIDEO0: start decode
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.121000] ch0: lock
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.121000] RAP first pts 0x5a598088, stc 0x3a68db44, pcr valid
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.121000] RAP pts error 0 PTS 0x2d2cc044, STC 0x1d346da4, type 0
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.156000] ch0: lock
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.156000] RAP pts error 0 PTS 0x2d2cc044, STC 0x1d3473d1, type 1
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.188000] ch0: lock
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.188000] RAP pts error 0 PTS 0x2d2cc044, STC 0x1d347955, type 1
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.294000] stop pcr0 on dmx 3 pid:ff
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.295000] stop video0 on dmx 3 pid:ff
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.295000] VIDEO0 use saved pts 0x1b0337a20 (ret 0)
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.296000] VIDEO0: stop decode
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.297000] VIDEO0: set blank to 1
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.298000] audio: decoder stop
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.314000] stop audio on dmx 3 pid:103
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.314000] audio: xpt stop(3)
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.314000] no decoder left in sync handling so disable xpt_sync
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.314000] bcm_audio_channel_stop(3) done
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.803000] start pcr0 on dmx 3 pid:ff index 5
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.804000] start audio on dmx 3 pid:103
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.804000] audio xpt start
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.804000] sync is off so we enable it
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.805000] demux-index 3 pcr0pid ff
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.805000] using 5 as pcr0 pidchannel
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.805000] AC3
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.806000] audio: decoder start 0
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.817000] audio delay 18000 (200 ms)
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.817000] total video delay: 18000 (200 ms)
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.819000] start video0 on dmx 3 pid:ff
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.819000] total video delay: 18000 (200 ms)
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.821000] VIDEO0: start decode
Dec 17 20:35:01 dm8000 user.warn kernel: [433771.461000] stop pcr0 on dmx 3 pid:ff
Dec 17 20:35:01 dm8000 user.warn kernel: [433771.463000] stop video0 on dmx 3 pid:ff
Dec 17 20:35:01 dm8000 user.warn kernel: [433771.463000] VIDEO0 use saved pts 0x1b0337a20 (ret 0)
Dec 17 20:35:01 dm8000 user.warn kernel: [433771.464000] VIDEO0: stop decode
Dec 17 20:35:01 dm8000 user.warn kernel: [433771.465000] VIDEO0: set blank to 1
Dec 17 20:35:01 dm8000 user.warn kernel: [433771.468000] bcm_audio: use saved pts 0x5a598088 (0x0) (ret 0)
Dec 17 20:35:01 dm8000 user.warn kernel: [433771.468000] audio: decoder stop
Dec 17 20:35:01 dm8000 user.warn kernel: [433771.484000] stop audio on dmx 3 pid:103
Dec 17 20:35:01 dm8000 user.warn kernel: [433771.484000] audio: xpt stop(3)
Dec 17 20:35:01 dm8000 user.warn kernel: [433771.484000] no decoder left in sync handling so disable xpt_sync
Dec 17 20:35:01 dm8000 user.warn kernel: [433771.484000] bcm_audio_channel_stop(3) done
Dec 17 20:35:01 dm8000 user.warn kernel: [433771.592000] start pcr0 on dmx 3 pid:1ff index 5
Dec 17 20:35:01 dm8000 user.warn kernel: [433771.594000] start audio on dmx 3 pid:203
Dec 17 20:35:01 dm8000 user.warn kernel: [433771.594000] audio xpt start
Dec 17 20:35:01 dm8000 user.warn kernel: [433771.594000] sync is off so we enable it
Dec 17 20:35:01 dm8000 user.warn kernel: [433771.594000] demux-index 3 pcr0pid 1ff
Dec 17 20:35:01 dm8000 user.warn kernel: [433771.594000] using 5 as pcr0 pidchannel
Dec 17 20:35:01 dm8000 user.warn kernel: [433771.594000] AC3
Dec 17 20:35:01 dm8000 user.warn kernel: [433771.594000] audio: decoder start 0
Dec 17 20:35:01 dm8000 user.warn kernel: [433771.605000] audio delay 18000 (200 ms)
Dec 17 20:35:01 dm8000 user.warn kernel: [433771.605000] total video delay: 18000 (200 ms)
Dec 17 20:35:01 dm8000 user.warn kernel: [433771.607000] start video0 on dmx 3 pid:1ff
Dec 17 20:35:01 dm8000 user.warn kernel: [433771.607000] total video delay: 18000 (200 ms)
Dec 17 20:35:01 dm8000 user.warn kernel: [433771.609000] VIDEO0: start decode
Dec 17 20:35:02 dm8000 user.warn kernel: [433772.246000] ch0: lock
Dec 17 20:35:02 dm8000 user.warn kernel: [433772.246000] RAP first pts 0x19f6f7964, stc 0x19f6f7194, pcr valid
Dec 17 20:35:02 dm8000 user.warn kernel: [433772.548000] RAP sampling rate info isr
Dec 17 20:35:02 dm8000 user.warn kernel: [433772.577000] stop pcr0 on dmx 3 pid:1ff
Dec 17 20:35:02 dm8000 user.warn kernel: [433772.579000] stop video0 on dmx 3 pid:1ff
Dec 17 20:35:02 dm8000 user.warn kernel: [433772.579000] VIDEO0 use saved pts 0x1b0337a20 (ret 0)
Dec 17 20:35:02 dm8000 user.warn kernel: [433772.579000] VIDEO0: stop decode
Dec 17 20:35:02 dm8000 user.warn kernel: [433772.581000] VIDEO0: set blank to 1
Dec 17 20:35:02 dm8000 user.warn kernel: [433772.582000] audio: decoder stop
Dec 17 20:35:02 dm8000 user.warn kernel: [433772.599000] stop audio on dmx 3 pid:203
Dec 17 20:35:02 dm8000 user.warn kernel: [433772.599000] audio: xpt stop(3)
Dec 17 20:35:02 dm8000 user.warn kernel: [433772.599000] no decoder left in sync handling so disable xpt_sync
Dec 17 20:35:02 dm8000 user.warn kernel: [433772.599000] bcm_audio_channel_stop(3) done
Dec 17 20:35:03 dm8000 user.warn kernel: [433773.082000] start pcr0 on dmx 3 pid:5ff index 5
Dec 17 20:35:03 dm8000 user.warn kernel: [433773.084000] start audio on dmx 3 pid:603
Dec 17 20:35:03 dm8000 user.warn kernel: [433773.084000] audio xpt start
Dec 17 20:35:03 dm8000 user.warn kernel: [433773.084000] sync is off so we enable it
Dec 17 20:35:03 dm8000 user.warn kernel: [433773.084000] demux-index 3 pcr0pid 5ff
Dec 17 20:35:03 dm8000 user.warn kernel: [433773.084000] using 5 as pcr0 pidchannel
Dec 17 20:35:03 dm8000 user.warn kernel: [433773.084000] AC3
Dec 17 20:35:03 dm8000 user.warn kernel: [433773.085000] audio: decoder start 0
Dec 17 20:35:03 dm8000 user.warn kernel: [433773.096000] audio delay 18000 (200 ms)
Dec 17 20:35:03 dm8000 user.warn kernel: [433773.096000] total video delay: 18000 (200 ms)
Dec 17 20:35:03 dm8000 user.warn kernel: [433773.098000] start video0 on dmx 3 pid:5ff
Dec 17 20:35:03 dm8000 user.warn kernel: [433773.098000] total video delay: 18000 (200 ms)
Dec 17 20:35:03 dm8000 user.warn kernel: [433773.099000] VIDEO0: start decode
Dec 17 20:35:05 dm8000 user.warn kernel: [433773.759000] stop pcr0 on dmx 3 pid:5ff
Dec 17 20:35:05 dm8000 user.warn kernel: [433773.759000] stop video0 on dmx 3 pid:5ff
Dec 17 20:35:05 dm8000 user.warn kernel: [433773.759000] VIDEO0 use saved pts 0x1b0337a20 (ret 0)
Dec 17 20:35:05 dm8000 user.warn kernel: [433773.760000] VIDEO0: stop decode
Dec 17 20:35:05 dm8000 user.warn kernel: [433773.761000] VIDEO0: set blank to 1
Dec 17 20:35:05 dm8000 user.warn kernel: [433773.762000] bcm_audio: use saved pts 0x19f6f84a4 (0x0) (ret 0)
Dec 17 20:35:05 dm8000 user.warn kernel: [433773.762000] audio: decoder stop
Dec 17 20:35:05 dm8000 user.warn kernel: [433773.778000] stop audio on dmx 3 pid:603
Dec 17 20:35:05 dm8000 user.warn kernel: [433773.778000] audio: xpt stop(3)
Dec 17 20:35:05 dm8000 user.warn kernel: [433773.778000] no decoder left in sync handling so disable xpt_sync
Dec 17 20:35:05 dm8000 user.warn kernel: [433773.778000] bcm_audio_channel_stop(3) done
Dec 17 20:35:05 dm8000 user.warn kernel: [433773.889000] start pcr0 on dmx 3 pid:1ff index 4
Dec 17 20:35:05 dm8000 user.warn kernel: [433773.891000] start audio on dmx 3 pid:203
Dec 17 20:35:05 dm8000 user.warn kernel: [433773.891000] audio xpt start
Dec 17 20:35:05 dm8000 user.warn kernel: [433773.891000] sync is off so we enable it
Dec 17 20:35:05 dm8000 user.warn kernel: [433773.891000] demux-index 3 pcr0pid 1ff
Dec 17 20:35:05 dm8000 user.warn kernel: [433773.891000] using 4 as pcr0 pidchannel
Dec 17 20:35:05 dm8000 user.warn kernel: [433773.891000] AC3
Dec 17 20:35:05 dm8000 user.warn kernel: [433773.892000] audio: decoder start 0
Dec 17 20:35:05 dm8000 user.warn kernel: [433773.903000] audio delay 18000 (200 ms)
Dec 17 20:35:05 dm8000 user.warn kernel: [433773.903000] total video delay: 18000 (200 ms)
Dec 17 20:35:05 dm8000 user.warn kernel: [433773.905000] start video0 on dmx 3 pid:1ff
Dec 17 20:35:05 dm8000 user.warn kernel: [433773.905000] total video delay: 18000 (200 ms)
Dec 17 20:35:05 dm8000 user.warn kernel: [433773.907000] VIDEO0: start decode
Dec 17 20:35:06 dm8000 user.warn kernel: [433774.450000] ch0: lock
Dec 17 20:35:06 dm8000 user.warn kernel: [433774.450000] RAP first pts 0x39249250, stc 0x39248a64, pcr valid
Dec 17 20:35:06 dm8000 user.warn kernel: [433774.752000] RAP sampling rate info isr
Dec 17 20:35:06 dm8000 user.warn kernel: [433774.948000] stop pcr0 on dmx 3 pid:1ff
Dec 17 20:35:06 dm8000 user.warn kernel: [433774.949000] stop video0 on dmx 3 pid:1ff
Dec 17 20:35:06 dm8000 user.warn kernel: [433774.949000] VIDEO0 use saved pts 0x1b0337a20 (ret 0)
Dec 17 20:35:06 dm8000 user.warn kernel: [433774.950000] VIDEO0: stop decode
Dec 17 20:35:06 dm8000 user.warn kernel: [433774.951000] VIDEO0: set blank to 1
Dec 17 20:35:06 dm8000 user.warn kernel: [433774.952000] audio: decoder stop
Dec 17 20:35:06 dm8000 user.warn kernel: [433774.969000] stop audio on dmx 3 pid:203
Dec 17 20:35:06 dm8000 user.warn kernel: [433774.969000] audio: xpt stop(2)
Dec 17 20:35:06 dm8000 user.warn kernel: [433774.969000] no decoder left in sync handling so disable xpt_sync
Dec 17 20:35:06 dm8000 user.warn kernel: [433774.969000] bcm_audio_channel_stop(2) done
Dec 17 20:35:07 dm8000 user.warn kernel: [433775.470000] start pcr0 on dmx 3 pid:2ff index 5
Dec 17 20:35:07 dm8000 user.warn kernel: [433775.472000] start audio on dmx 3 pid:303
Dec 17 20:35:07 dm8000 user.warn kernel: [433775.472000] audio xpt start
Dec 17 20:35:07 dm8000 user.warn kernel: [433775.473000] sync is off so we enable it
Dec 17 20:35:07 dm8000 user.warn kernel: [433775.473000] demux-index 3 pcr0pid 2ff
Dec 17 20:35:07 dm8000 user.warn kernel: [433775.473000] using 5 as pcr0 pidchannel
Dec 17 20:35:07 dm8000 user.warn kernel: [433775.473000] AC3
Dec 17 20:35:07 dm8000 user.warn kernel: [433775.474000] audio: decoder start 0
Dec 17 20:35:07 dm8000 user.warn kernel: [433775.485000] audio delay 18000 (200 ms)
Dec 17 20:35:07 dm8000 user.warn kernel: [433775.485000] total video delay: 18000 (200 ms)
Dec 17 20:35:07 dm8000 user.warn kernel: [433775.487000] start video0 on dmx 3 pid:2ff
Dec 17 20:35:07 dm8000 user.warn kernel: [433775.487000] total video delay: 18000 (200 ms)
Dec 17 20:35:07 dm8000 user.warn kernel: [433775.489000] VIDEO0: start decode
Dec 17 20:35:08 dm8000 user.warn kernel: [433776.266000] ch0: lock
Dec 17 20:35:08 dm8000 user.warn kernel: [433776.266000] RAP first pts 0x1980e8e62, stc 0x1a073fa8c, pcr valid
Dec 17 20:35:08 dm8000 user.warn kernel: [433776.266000] RAP pts error 0 PTS 0xcc074731, STC 0xd039fd48, type 0
Dec 17 20:35:08 dm8000 user.warn kernel: [433776.295000] ch0: lock
Dec 17 20:35:08 dm8000 user.warn kernel: [433776.597000] RAP sampling rate info isr
Dec 17 20:35:09 dm8000 user.warn kernel: [433777.180000] VIDEO0: first pts 0x1a0771e52
Dec 17 20:35:09 dm8000 user.warn kernel: [433777.180000] VIDEO0: framerate changed 3
Dec 17 20:35:09 dm8000 user.warn kernel: [433777.180000] VIDEO0: resolution changed (1920 1080)
Dec 17 20:35:09 dm8000 user.warn kernel: [433777.180000] VIDEO0: progressive changed (0)
Dec 17 20:35:09 dm8000 user.warn kernel: [433777.181000] set current avs auto aspect to 16:9
Dec 17 20:35:09 dm8000 user.warn kernel: [433777.181000] disable wss on display 0
Dec 17 20:35:09 dm8000 user.warn kernel: [433777.181000] set wss 7 on display 1
Dec 17 20:35:09 dm8000 user.warn kernel: [433777.182000] set sb to 3(1)
Dec 17 20:35:09 dm8000 user.warn kernel: [433777.331000] enable tsm0
Dec 17 20:34:37 dm8000 user.warn kernel: [433746.534000] set current avs auto aspect to 16:9
Dec 17 20:34:37 dm8000 user.warn kernel: [433746.535000] disable wss on display 0
Dec 17 20:34:37 dm8000 user.warn kernel: [433746.535000] set wss 7 on display 1
Dec 17 20:34:37 dm8000 user.warn kernel: [433746.535000] set sb to 3(1)
Dec 17 20:34:39 dm8000 user.warn kernel: [433748.177000] stop pcr0 on dmx 3 pid:2ff
Dec 17 20:34:39 dm8000 user.warn kernel: [433748.178000] stop video0 on dmx 3 pid:2ff
Dec 17 20:34:39 dm8000 user.warn kernel: [433748.182000] VIDEO0: stop decode
Dec 17 20:34:39 dm8000 user.warn kernel: [433748.183000] VIDEO0: set blank to 1
Dec 17 20:34:39 dm8000 user.warn kernel: [433748.184000] audio: decoder stop
Dec 17 20:34:39 dm8000 user.warn kernel: [433748.202000] stop audio on dmx 3 pid:303
Dec 17 20:34:39 dm8000 user.warn kernel: [433748.202000] audio: xpt stop(3)
Dec 17 20:34:39 dm8000 user.warn kernel: [433748.202000] no decoder left in sync handling so disable xpt_sync
Dec 17 20:34:39 dm8000 user.warn kernel: [433748.202000] bcm_audio_channel_stop(3) done
Dec 17 20:34:39 dm8000 user.warn kernel: [433748.664000] start pcr0 on dmx 3 pid:1ff index 5
Dec 17 20:34:39 dm8000 user.warn kernel: [433748.666000] start audio on dmx 3 pid:203
Dec 17 20:34:39 dm8000 user.warn kernel: [433748.666000] audio xpt start
Dec 17 20:34:39 dm8000 user.warn kernel: [433748.666000] sync is off so we enable it
Dec 17 20:34:39 dm8000 user.warn kernel: [433748.666000] demux-index 3 pcr0pid 1ff
Dec 17 20:34:39 dm8000 user.warn kernel: [433748.666000] using 5 as pcr0 pidchannel
Dec 17 20:34:39 dm8000 user.warn kernel: [433748.666000] AC3
Dec 17 20:34:39 dm8000 user.warn kernel: [433748.668000] audio: decoder start 0
Dec 17 20:34:39 dm8000 user.warn kernel: [433748.679000] audio delay 18000 (200 ms)
Dec 17 20:34:39 dm8000 user.warn kernel: [433748.679000] total video delay: 18000 (200 ms)
Dec 17 20:34:39 dm8000 user.warn kernel: [433748.682000] start video0 on dmx 3 pid:1ff
Dec 17 20:34:39 dm8000 user.warn kernel: [433748.682000] total video delay: 18000 (200 ms)
Dec 17 20:34:39 dm8000 user.warn kernel: [433748.683000] VIDEO0: start decode
Dec 17 20:34:41 dm8000 user.warn kernel: [433749.513000] ch0: lock
Dec 17 20:34:41 dm8000 user.warn kernel: [433749.513000] RAP first pts 0xb9de2f26, stc 0x61a9a314, pcr valid
Dec 17 20:34:41 dm8000 user.warn kernel: [433749.513000] RAP pts error 0 PTS 0x5cef1793, STC 0x30d4d18c, type 0
Dec 17 20:34:41 dm8000 user.warn kernel: [433749.544000] ch0: lock
Dec 17 20:34:41 dm8000 user.warn kernel: [433749.544000] RAP pts error 0 PTS 0x5cef1793, STC 0x30d4d6ea, type 1
Dec 17 20:34:41 dm8000 user.warn kernel: [433749.577000] ch0: lock
Dec 17 20:34:41 dm8000 user.warn kernel: [433749.577000] RAP pts error 0 PTS 0x5cef1793, STC 0x30d4dccf, type 1
Dec 17 20:34:41 dm8000 user.warn kernel: [433749.606000] ch0: lock
Dec 17 20:34:41 dm8000 user.warn kernel: [433749.908000] RAP sampling rate info isr
Dec 17 20:34:42 dm8000 user.warn kernel: [433750.315000] stop pcr0 on dmx 3 pid:1ff
Dec 17 20:34:42 dm8000 user.warn kernel: [433750.316000] stop video0 on dmx 3 pid:1ff
Dec 17 20:34:42 dm8000 user.warn kernel: [433750.316000] VIDEO0 use saved pts 0x1a04d0a72 (ret 0)
Dec 17 20:34:42 dm8000 user.warn kernel: [433750.317000] VIDEO0: stop decode
Dec 17 20:34:42 dm8000 user.warn kernel: [433750.317000] VIDEO0: set blank to 1
Dec 17 20:34:42 dm8000 user.warn kernel: [433750.318000] audio: decoder stop
Dec 17 20:34:42 dm8000 user.warn kernel: [433750.334000] stop audio on dmx 3 pid:203
Dec 17 20:34:42 dm8000 user.warn kernel: [433750.334000] audio: xpt stop(3)
Dec 17 20:34:42 dm8000 user.warn kernel: [433750.334000] no decoder left in sync handling so disable xpt_sync
Dec 17 20:34:42 dm8000 user.warn kernel: [433750.334000] bcm_audio_channel_stop(3) done
Dec 17 20:34:42 dm8000 user.warn kernel: [433750.841000] start pcr0 on dmx 3 pid:3ff index 5
Dec 17 20:34:42 dm8000 user.warn kernel: [433750.843000] start audio on dmx 3 pid:403
Dec 17 20:34:42 dm8000 user.warn kernel: [433750.843000] audio xpt start
Dec 17 20:34:42 dm8000 user.warn kernel: [433750.843000] sync is off so we enable it
Dec 17 20:34:42 dm8000 user.warn kernel: [433750.843000] demux-index 3 pcr0pid 3ff
Dec 17 20:34:42 dm8000 user.warn kernel: [433750.843000] using 5 as pcr0 pidchannel
Dec 17 20:34:42 dm8000 user.warn kernel: [433750.844000] AC3
Dec 17 20:34:42 dm8000 user.warn kernel: [433750.845000] audio: decoder start 0
Dec 17 20:34:42 dm8000 user.warn kernel: [433750.856000] audio delay 18000 (200 ms)
Dec 17 20:34:42 dm8000 user.warn kernel: [433750.856000] total video delay: 18000 (200 ms)
Dec 17 20:34:42 dm8000 user.warn kernel: [433750.858000] start video0 on dmx 3 pid:3ff
Dec 17 20:34:42 dm8000 user.warn kernel: [433750.858000] total video delay: 18000 (200 ms)
Dec 17 20:34:42 dm8000 user.warn kernel: [433750.860000] VIDEO0: start decode
Dec 17 20:34:43 dm8000 user.warn kernel: [433751.415000] ch0: lock
Dec 17 20:34:43 dm8000 user.warn kernel: [433751.416000] RAP first pts 0xfa601526, stc 0x10883b74, pcr valid
Dec 17 20:34:43 dm8000 user.warn kernel: [433751.416000] RAP pts error 0 PTS 0x7d300a93, STC 0x08441dbc, type 0
Dec 17 20:34:43 dm8000 user.warn kernel: [433751.446000] ch0: lock
Dec 17 20:34:43 dm8000 user.warn kernel: [433751.446000] RAP pts error 0 PTS 0x7d300a93, STC 0x0844231b, type 1
Dec 17 20:34:43 dm8000 user.warn kernel: [433751.480000] ch0: lock
Dec 17 20:34:43 dm8000 user.warn kernel: [433751.480000] RAP pts error 0 PTS 0x7d300a93, STC 0x08442905, type 1
Dec 17 20:34:43 dm8000 user.warn kernel: [433751.510000] ch0: lock
Dec 17 20:34:43 dm8000 user.warn kernel: [433751.639000] stop pcr0 on dmx 3 pid:3ff
Dec 17 20:34:43 dm8000 user.warn kernel: [433751.640000] stop video0 on dmx 3 pid:3ff
Dec 17 20:34:43 dm8000 user.warn kernel: [433751.640000] VIDEO0 use saved pts 0x1a04d0a72 (ret 0)
Dec 17 20:34:43 dm8000 user.warn kernel: [433751.641000] VIDEO0: stop decode
Dec 17 20:34:43 dm8000 user.warn kernel: [433751.641000] VIDEO0: set blank to 1
Dec 17 20:34:43 dm8000 user.warn kernel: [433751.642000] audio: decoder stop
Dec 17 20:34:43 dm8000 user.warn kernel: [433751.660000] stop audio on dmx 3 pid:403
Dec 17 20:34:43 dm8000 user.warn kernel: [433751.660000] audio: xpt stop(3)
Dec 17 20:34:43 dm8000 user.warn kernel: [433751.660000] no decoder left in sync handling so disable xpt_sync
Dec 17 20:34:43 dm8000 user.warn kernel: [433751.660000] bcm_audio_channel_stop(3) done
Dec 17 20:34:45 dm8000 user.warn kernel: [433753.483000] start pcr0 on dmx 3 pid:3ff index 5
Dec 17 20:34:45 dm8000 user.warn kernel: [433753.485000] start audio on dmx 3 pid:403
Dec 17 20:34:45 dm8000 user.warn kernel: [433753.485000] audio xpt start
Dec 17 20:34:45 dm8000 user.warn kernel: [433753.485000] sync is off so we enable it
Dec 17 20:34:45 dm8000 user.warn kernel: [433753.485000] demux-index 3 pcr0pid 3ff
Dec 17 20:34:45 dm8000 user.warn kernel: [433753.485000] using 5 as pcr0 pidchannel
Dec 17 20:34:45 dm8000 user.warn kernel: [433753.485000] AC3
Dec 17 20:34:45 dm8000 user.warn kernel: [433753.486000] audio: decoder start 0
Dec 17 20:34:45 dm8000 user.warn kernel: [433753.497000] audio delay 18000 (200 ms)
Dec 17 20:34:45 dm8000 user.warn kernel: [433753.497000] total video delay: 18000 (200 ms)
Dec 17 20:34:45 dm8000 user.warn kernel: [433753.499000] start video0 on dmx 3 pid:3ff
Dec 17 20:34:45 dm8000 user.warn kernel: [433753.499000] total video delay: 18000 (200 ms)
Dec 17 20:34:45 dm8000 user.warn kernel: [433753.501000] VIDEO0: start decode
Dec 17 20:34:45 dm8000 user.warn kernel: [433753.690000] stop pcr0 on dmx 3 pid:3ff
Dec 17 20:34:45 dm8000 user.warn kernel: [433753.691000] stop video0 on dmx 3 pid:3ff
Dec 17 20:34:45 dm8000 user.warn kernel: [433753.691000] VIDEO0 use saved pts 0x1a04d0a72 (ret 0)
Dec 17 20:34:45 dm8000 user.warn kernel: [433753.692000] VIDEO0: stop decode
Dec 17 20:34:45 dm8000 user.warn kernel: [433753.692000] VIDEO0: set blank to 1
Dec 17 20:34:45 dm8000 user.warn kernel: [433753.693000] bcm_audio: use saved pts 0x10886488 (0x0) (ret 0)
Dec 17 20:34:45 dm8000 user.warn kernel: [433753.693000] audio: decoder stop
Dec 17 20:34:45 dm8000 user.warn kernel: [433753.709000] stop audio on dmx 3 pid:403
Dec 17 20:34:45 dm8000 user.warn kernel: [433753.709000] audio: xpt stop(3)
Dec 17 20:34:45 dm8000 user.warn kernel: [433753.709000] no decoder left in sync handling so disable xpt_sync
Dec 17 20:34:45 dm8000 user.warn kernel: [433753.709000] bcm_audio_channel_stop(3) done
Dec 17 20:34:46 dm8000 user.warn kernel: [433754.195000] start pcr0 on dmx 3 pid:1ff index 5
Dec 17 20:34:46 dm8000 user.warn kernel: [433754.198000] start audio on dmx 3 pid:203
Dec 17 20:34:46 dm8000 user.warn kernel: [433754.198000] audio xpt start
Dec 17 20:34:46 dm8000 user.warn kernel: [433754.198000] sync is off so we enable it
Dec 17 20:34:46 dm8000 user.warn kernel: [433754.198000] demux-index 3 pcr0pid 1ff
Dec 17 20:34:46 dm8000 user.warn kernel: [433754.199000] using 5 as pcr0 pidchannel
Dec 17 20:34:46 dm8000 user.warn kernel: [433754.199000] AC3
Dec 17 20:34:46 dm8000 user.warn kernel: [433754.200000] audio: decoder start 0
Dec 17 20:34:46 dm8000 user.warn kernel: [433754.211000] audio delay 18000 (200 ms)
Dec 17 20:34:46 dm8000 user.warn kernel: [433754.211000] total video delay: 18000 (200 ms)
Dec 17 20:34:46 dm8000 user.warn kernel: [433754.213000] start video0 on dmx 3 pid:1ff
Dec 17 20:34:46 dm8000 user.warn kernel: [433754.213000] total video delay: 18000 (200 ms)
Dec 17 20:34:46 dm8000 user.warn kernel: [433754.215000] VIDEO0: start decode
Dec 17 20:34:46 dm8000 user.warn kernel: [433754.742000] stop pcr0 on dmx 3 pid:1ff
Dec 17 20:34:46 dm8000 user.warn kernel: [433754.743000] stop video0 on dmx 3 pid:1ff
Dec 17 20:34:46 dm8000 user.warn kernel: [433754.743000] VIDEO0 use saved pts 0x1a04d0a72 (ret 0)
Dec 17 20:34:46 dm8000 user.warn kernel: [433754.744000] VIDEO0: stop decode
Dec 17 20:34:46 dm8000 user.warn kernel: [433754.745000] VIDEO0: set blank to 1
Dec 17 20:34:46 dm8000 user.warn kernel: [433754.747000] bcm_audio: use saved pts 0x10886488 (0x0) (ret 0)
Dec 17 20:34:46 dm8000 user.warn kernel: [433754.747000] audio: decoder stop
Dec 17 20:34:46 dm8000 user.warn kernel: [433754.764000] stop audio on dmx 3 pid:203
Dec 17 20:34:46 dm8000 user.warn kernel: [433754.764000] audio: xpt stop(3)
Dec 17 20:34:46 dm8000 user.warn kernel: [433754.764000] no decoder left in sync handling so disable xpt_sync
Dec 17 20:34:46 dm8000 user.warn kernel: [433754.764000] bcm_audio_channel_stop(3) done
Dec 17 20:34:47 dm8000 user.warn kernel: [433755.247000] start pcr0 on dmx 3 pid:2ff index 5
Dec 17 20:34:47 dm8000 user.warn kernel: [433755.249000] start audio on dmx 3 pid:303
Dec 17 20:34:47 dm8000 user.warn kernel: [433755.249000] audio xpt start
Dec 17 20:34:47 dm8000 user.warn kernel: [433755.249000] sync is off so we enable it
Dec 17 20:34:47 dm8000 user.warn kernel: [433755.249000] demux-index 3 pcr0pid 2ff
Dec 17 20:34:47 dm8000 user.warn kernel: [433755.249000] using 5 as pcr0 pidchannel
Dec 17 20:34:47 dm8000 user.warn kernel: [433755.249000] AC3
Dec 17 20:34:47 dm8000 user.warn kernel: [433755.251000] audio: decoder start 0
Dec 17 20:34:47 dm8000 user.warn kernel: [433755.262000] audio delay 18000 (200 ms)
Dec 17 20:34:47 dm8000 user.warn kernel: [433755.262000] total video delay: 18000 (200 ms)
Dec 17 20:34:47 dm8000 user.warn kernel: [433755.264000] start video0 on dmx 3 pid:2ff
Dec 17 20:34:47 dm8000 user.warn kernel: [433755.264000] total video delay: 18000 (200 ms)
Dec 17 20:34:47 dm8000 user.warn kernel: [433755.265000] VIDEO0: start decode
Dec 17 20:34:48 dm8000 user.warn kernel: [433756.006000] ch0: lock
Dec 17 20:34:48 dm8000 user.warn kernel: [433756.006000] RAP first pts 0x16790eda6, stc 0x1a05827c0, pcr valid
Dec 17 20:34:48 dm8000 user.warn kernel: [433756.006000] RAP pts error 0 PTS 0xb3c876d3, STC 0xd02c13e2, type 0
Dec 17 20:34:48 dm8000 user.warn kernel: [433756.041000] ch0: lock
Dec 17 20:34:48 dm8000 user.warn kernel: [433756.041000] RAP pts error 0 PTS 0xb3c876d3, STC 0xd02c1a10, type 1
Dec 17 20:34:48 dm8000 user.warn kernel: [433756.072000] ch0: lock
Dec 17 20:34:48 dm8000 user.warn kernel: [433756.072000] RAP pts error 0 PTS 0xb3c876d3, STC 0xd02c1f94, type 1
Dec 17 20:34:48 dm8000 user.warn kernel: [433756.106000] ch0: lock
Dec 17 20:34:48 dm8000 user.warn kernel: [433756.106000] RAP pts error 0 PTS 0xb3c876d3, STC 0xd02c257d, type 1
Dec 17 20:34:48 dm8000 user.warn kernel: [433756.135000] ch0: lock
Dec 17 20:34:48 dm8000 user.warn kernel: [433756.400000] VIDEO0: first pts 0x1a05a8dd2
Dec 17 20:34:48 dm8000 user.warn kernel: [433756.437000] RAP sampling rate info isr
Dec 17 20:34:48 dm8000 user.warn kernel: [433756.550000] enable tsm0
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.194000] stop pcr0 on dmx 3 pid:2ff
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.194000] stop video0 on dmx 3 pid:2ff
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.195000] VIDEO0: stop decode
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.196000] VIDEO0: set blank to 1
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.197000] audio: decoder stop
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.213000] stop audio on dmx 3 pid:303
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.213000] audio: xpt stop(3)
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.213000] no decoder left in sync handling so disable xpt_sync
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.213000] bcm_audio_channel_stop(3) done
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.690000] start pcr0 on dmx 3 pid:13ed index 5
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.692000] start audio on dmx 3 pid:13f2
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.692000] audio xpt start
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.692000] sync is off so we enable it
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.692000] demux-index 3 pcr0pid 13ed
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.692000] using 5 as pcr0 pidchannel
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.692000] AC3
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.694000] audio: decoder start 0
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.705000] audio delay 18000 (200 ms)
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.705000] total video delay: 18000 (200 ms)
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.707000] start video0 on dmx 3 pid:13ed
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.707000] total video delay: 18000 (200 ms)
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.709000] VIDEO0: start decode
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.727000] ch0: lock
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.758000] ch0: lock
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.794000] ch0: lock
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.820000] ch0: lock
Dec 17 20:34:53 dm8000 user.warn kernel: [433762.820000] RAP first pts 0x7030da54, stc 0x7030ce74, pcr valid
Dec 17 20:34:54 dm8000 user.warn kernel: [433763.133000] RAP sampling rate info isr
Dec 17 20:34:53 dm8000 user.warn kernel: [433763.360000] VIDEO0: first pts 0x70325c90
Dec 17 20:34:53 dm8000 user.warn kernel: [433763.360000] VIDEO0: framerate changed 6
Dec 17 20:34:53 dm8000 user.warn kernel: [433763.360000] VIDEO0: resolution changed (1280 720)
Dec 17 20:34:53 dm8000 user.warn kernel: [433763.361000] set current avs auto aspect to 16:9
Dec 17 20:34:53 dm8000 user.warn kernel: [433763.361000] disable wss on display 0
Dec 17 20:34:53 dm8000 user.warn kernel: [433763.361000] set wss 7 on display 1
Dec 17 20:34:53 dm8000 user.warn kernel: [433763.361000] set sb to 3(1)
Dec 17 20:34:53 dm8000 user.warn kernel: [433763.511000] enable tsm0
Dec 17 20:34:53 dm8000 user.warn kernel: [433763.720000] VIDEO0: progressive changed (1)
Dec 17 20:34:55 dm8000 user.warn kernel: [433765.606000] stop pcr0 on dmx 3 pid:13ed
Dec 17 20:34:55 dm8000 user.warn kernel: [433765.607000] stop video0 on dmx 3 pid:13ed
Dec 17 20:34:55 dm8000 user.warn kernel: [433765.613000] VIDEO0: stop decode
Dec 17 20:34:55 dm8000 user.warn kernel: [433765.613000] VIDEO0: set blank to 1
Dec 17 20:34:55 dm8000 user.warn kernel: [433765.615000] audio: decoder stop
Dec 17 20:34:55 dm8000 user.warn kernel: [433765.632000] stop audio on dmx 3 pid:13f2
Dec 17 20:34:55 dm8000 user.warn kernel: [433765.632000] audio: xpt stop(3)
Dec 17 20:34:55 dm8000 user.warn kernel: [433765.632000] no decoder left in sync handling so disable xpt_sync
Dec 17 20:34:55 dm8000 user.warn kernel: [433765.632000] bcm_audio_channel_stop(3) done
Dec 17 20:34:56 dm8000 user.warn kernel: [433766.106000] start pcr0 on dmx 3 pid:17de index 5
Dec 17 20:34:56 dm8000 user.warn kernel: [433766.107000] start audio on dmx 3 pid:17ea
Dec 17 20:34:56 dm8000 user.warn kernel: [433766.108000] audio xpt start
Dec 17 20:34:56 dm8000 user.warn kernel: [433766.108000] sync is off so we enable it
Dec 17 20:34:56 dm8000 user.warn kernel: [433766.108000] demux-index 3 pcr0pid 17de
Dec 17 20:34:56 dm8000 user.warn kernel: [433766.108000] using 5 as pcr0 pidchannel
Dec 17 20:34:56 dm8000 user.warn kernel: [433766.108000] AC3
Dec 17 20:34:56 dm8000 user.warn kernel: [433766.109000] audio: decoder start 0
Dec 17 20:34:56 dm8000 user.warn kernel: [433766.120000] audio delay 18000 (200 ms)
Dec 17 20:34:56 dm8000 user.warn kernel: [433766.120000] total video delay: 18000 (200 ms)
Dec 17 20:34:56 dm8000 user.warn kernel: [433766.122000] start video0 on dmx 3 pid:17de
Dec 17 20:34:56 dm8000 user.warn kernel: [433766.122000] total video delay: 18000 (200 ms)
Dec 17 20:34:56 dm8000 user.warn kernel: [433766.125000] VIDEO0: start decode
Dec 17 20:34:56 dm8000 user.warn kernel: [433766.167000] ch0: lock
Dec 17 20:34:56 dm8000 user.warn kernel: [433766.167000] RAP first pts 0x1b02fceec, stc 0x1b02fc75c, pcr valid
Dec 17 20:34:56 dm8000 user.warn kernel: [433766.468000] RAP sampling rate info isr
Dec 17 20:34:57 dm8000 user.warn kernel: [433767.140000] VIDEO0: first pts 0x1b0319c00
Dec 17 20:34:57 dm8000 user.warn kernel: [433767.291000] enable tsm0
Dec 17 20:34:59 dm8000 user.warn kernel: [433769.090000] stop pcr0 on dmx 3 pid:17de
Dec 17 20:34:59 dm8000 user.warn kernel: [433769.090000] stop video0 on dmx 3 pid:17de
Dec 17 20:34:59 dm8000 user.warn kernel: [433769.091000] VIDEO0: stop decode
Dec 17 20:34:59 dm8000 user.warn kernel: [433769.092000] VIDEO0: set blank to 1
Dec 17 20:34:59 dm8000 user.warn kernel: [433769.093000] audio: decoder stop
Dec 17 20:34:59 dm8000 user.warn kernel: [433769.109000] stop audio on dmx 3 pid:17ea
Dec 17 20:34:59 dm8000 user.warn kernel: [433769.109000] audio: xpt stop(3)
Dec 17 20:34:59 dm8000 user.warn kernel: [433769.109000] no decoder left in sync handling so disable xpt_sync
Dec 17 20:34:59 dm8000 user.warn kernel: [433769.109000] bcm_audio_channel_stop(3) done
Dec 17 20:34:59 dm8000 user.warn kernel: [433769.617000] start pcr0 on dmx 3 pid:ff index 5
Dec 17 20:34:59 dm8000 user.warn kernel: [433769.619000] start audio on dmx 3 pid:103
Dec 17 20:34:59 dm8000 user.warn kernel: [433769.619000] audio xpt start
Dec 17 20:34:59 dm8000 user.warn kernel: [433769.619000] sync is off so we enable it
Dec 17 20:34:59 dm8000 user.warn kernel: [433769.619000] demux-index 3 pcr0pid ff
Dec 17 20:34:59 dm8000 user.warn kernel: [433769.619000] using 5 as pcr0 pidchannel
Dec 17 20:34:59 dm8000 user.warn kernel: [433769.619000] AC3
Dec 17 20:34:59 dm8000 user.warn kernel: [433769.621000] audio: decoder start 0
Dec 17 20:34:59 dm8000 user.warn kernel: [433769.632000] audio delay 18000 (200 ms)
Dec 17 20:34:59 dm8000 user.warn kernel: [433769.632000] total video delay: 18000 (200 ms)
Dec 17 20:34:59 dm8000 user.warn kernel: [433769.634000] start video0 on dmx 3 pid:ff
Dec 17 20:34:59 dm8000 user.warn kernel: [433769.634000] total video delay: 18000 (200 ms)
Dec 17 20:34:59 dm8000 user.warn kernel: [433769.636000] VIDEO0: start decode
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.121000] ch0: lock
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.121000] RAP first pts 0x5a598088, stc 0x3a68db44, pcr valid
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.121000] RAP pts error 0 PTS 0x2d2cc044, STC 0x1d346da4, type 0
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.156000] ch0: lock
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.156000] RAP pts error 0 PTS 0x2d2cc044, STC 0x1d3473d1, type 1
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.188000] ch0: lock
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.188000] RAP pts error 0 PTS 0x2d2cc044, STC 0x1d347955, type 1
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.294000] stop pcr0 on dmx 3 pid:ff
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.295000] stop video0 on dmx 3 pid:ff
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.295000] VIDEO0 use saved pts 0x1b0337a20 (ret 0)
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.296000] VIDEO0: stop decode
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.297000] VIDEO0: set blank to 1
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.298000] audio: decoder stop
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.314000] stop audio on dmx 3 pid:103
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.314000] audio: xpt stop(3)
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.314000] no decoder left in sync handling so disable xpt_sync
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.314000] bcm_audio_channel_stop(3) done
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.803000] start pcr0 on dmx 3 pid:ff index 5
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.804000] start audio on dmx 3 pid:103
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.804000] audio xpt start
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.804000] sync is off so we enable it
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.805000] demux-index 3 pcr0pid ff
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.805000] using 5 as pcr0 pidchannel
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.805000] AC3
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.806000] audio: decoder start 0
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.817000] audio delay 18000 (200 ms)
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.817000] total video delay: 18000 (200 ms)
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.819000] start video0 on dmx 3 pid:ff
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.819000] total video delay: 18000 (200 ms)
Dec 17 20:35:00 dm8000 user.warn kernel: [433770.821000] VIDEO0: start decode
Dec 17 20:35:01 dm8000 user.warn kernel: [433771.461000] stop pcr0 on dmx 3 pid:ff
Dec 17 20:35:01 dm8000 user.warn kernel: [433771.463000] stop video0 on dmx 3 pid:ff
Dec 17 20:35:01 dm8000 user.warn kernel: [433771.463000] VIDEO0 use saved pts 0x1b0337a20 (ret 0)
Dec 17 20:35:01 dm8000 user.warn kernel: [433771.464000] VIDEO0: stop decode
Dec 17 20:35:01 dm8000 user.warn kernel: [433771.465000] VIDEO0: set blank to 1
Dec 17 20:35:01 dm8000 user.warn kernel: [433771.468000] bcm_audio: use saved pts 0x5a598088 (0x0) (ret 0)
Dec 17 20:35:01 dm8000 user.warn kernel: [433771.468000] audio: decoder stop
Dec 17 20:35:01 dm8000 user.warn kernel: [433771.484000] stop audio on dmx 3 pid:103
Dec 17 20:35:01 dm8000 user.warn kernel: [433771.484000] audio: xpt stop(3)
Dec 17 20:35:01 dm8000 user.warn kernel: [433771.484000] no decoder left in sync handling so disable xpt_sync
Dec 17 20:35:01 dm8000 user.warn kernel: [433771.484000] bcm_audio_channel_stop(3) done
Dec 17 20:35:01 dm8000 user.warn kernel: [433771.592000] start pcr0 on dmx 3 pid:1ff index 5
Dec 17 20:35:01 dm8000 user.warn kernel: [433771.594000] start audio on dmx 3 pid:203
Dec 17 20:35:01 dm8000 user.warn kernel: [433771.594000] audio xpt start
Dec 17 20:35:01 dm8000 user.warn kernel: [433771.594000] sync is off so we enable it
Dec 17 20:35:01 dm8000 user.warn kernel: [433771.594000] demux-index 3 pcr0pid 1ff
Dec 17 20:35:01 dm8000 user.warn kernel: [433771.594000] using 5 as pcr0 pidchannel
Dec 17 20:35:01 dm8000 user.warn kernel: [433771.594000] AC3
Dec 17 20:35:01 dm8000 user.warn kernel: [433771.594000] audio: decoder start 0
Dec 17 20:35:01 dm8000 user.warn kernel: [433771.605000] audio delay 18000 (200 ms)
Dec 17 20:35:01 dm8000 user.warn kernel: [433771.605000] total video delay: 18000 (200 ms)
Dec 17 20:35:01 dm8000 user.warn kernel: [433771.607000] start video0 on dmx 3 pid:1ff
Dec 17 20:35:01 dm8000 user.warn kernel: [433771.607000] total video delay: 18000 (200 ms)
Dec 17 20:35:01 dm8000 user.warn kernel: [433771.609000] VIDEO0: start decode
Dec 17 20:35:02 dm8000 user.warn kernel: [433772.246000] ch0: lock
Dec 17 20:35:02 dm8000 user.warn kernel: [433772.246000] RAP first pts 0x19f6f7964, stc 0x19f6f7194, pcr valid
Dec 17 20:35:02 dm8000 user.warn kernel: [433772.548000] RAP sampling rate info isr
Dec 17 20:35:02 dm8000 user.warn kernel: [433772.577000] stop pcr0 on dmx 3 pid:1ff
Dec 17 20:35:02 dm8000 user.warn kernel: [433772.579000] stop video0 on dmx 3 pid:1ff
Dec 17 20:35:02 dm8000 user.warn kernel: [433772.579000] VIDEO0 use saved pts 0x1b0337a20 (ret 0)
Dec 17 20:35:02 dm8000 user.warn kernel: [433772.579000] VIDEO0: stop decode
Dec 17 20:35:02 dm8000 user.warn kernel: [433772.581000] VIDEO0: set blank to 1
Dec 17 20:35:02 dm8000 user.warn kernel: [433772.582000] audio: decoder stop
Dec 17 20:35:02 dm8000 user.warn kernel: [433772.599000] stop audio on dmx 3 pid:203
Dec 17 20:35:02 dm8000 user.warn kernel: [433772.599000] audio: xpt stop(3)
Dec 17 20:35:02 dm8000 user.warn kernel: [433772.599000] no decoder left in sync handling so disable xpt_sync
Dec 17 20:35:02 dm8000 user.warn kernel: [433772.599000] bcm_audio_channel_stop(3) done
Dec 17 20:35:03 dm8000 user.warn kernel: [433773.082000] start pcr0 on dmx 3 pid:5ff index 5
Dec 17 20:35:03 dm8000 user.warn kernel: [433773.084000] start audio on dmx 3 pid:603
Dec 17 20:35:03 dm8000 user.warn kernel: [433773.084000] audio xpt start
Dec 17 20:35:03 dm8000 user.warn kernel: [433773.084000] sync is off so we enable it
Dec 17 20:35:03 dm8000 user.warn kernel: [433773.084000] demux-index 3 pcr0pid 5ff
Dec 17 20:35:03 dm8000 user.warn kernel: [433773.084000] using 5 as pcr0 pidchannel
Dec 17 20:35:03 dm8000 user.warn kernel: [433773.084000] AC3
Dec 17 20:35:03 dm8000 user.warn kernel: [433773.085000] audio: decoder start 0
Dec 17 20:35:03 dm8000 user.warn kernel: [433773.096000] audio delay 18000 (200 ms)
Dec 17 20:35:03 dm8000 user.warn kernel: [433773.096000] total video delay: 18000 (200 ms)
Dec 17 20:35:03 dm8000 user.warn kernel: [433773.098000] start video0 on dmx 3 pid:5ff
Dec 17 20:35:03 dm8000 user.warn kernel: [433773.098000] total video delay: 18000 (200 ms)
Dec 17 20:35:03 dm8000 user.warn kernel: [433773.099000] VIDEO0: start decode
Dec 17 20:35:05 dm8000 user.warn kernel: [433773.759000] stop pcr0 on dmx 3 pid:5ff
Dec 17 20:35:05 dm8000 user.warn kernel: [433773.759000] stop video0 on dmx 3 pid:5ff
Dec 17 20:35:05 dm8000 user.warn kernel: [433773.759000] VIDEO0 use saved pts 0x1b0337a20 (ret 0)
Dec 17 20:35:05 dm8000 user.warn kernel: [433773.760000] VIDEO0: stop decode
Dec 17 20:35:05 dm8000 user.warn kernel: [433773.761000] VIDEO0: set blank to 1
Dec 17 20:35:05 dm8000 user.warn kernel: [433773.762000] bcm_audio: use saved pts 0x19f6f84a4 (0x0) (ret 0)
Dec 17 20:35:05 dm8000 user.warn kernel: [433773.762000] audio: decoder stop
Dec 17 20:35:05 dm8000 user.warn kernel: [433773.778000] stop audio on dmx 3 pid:603
Dec 17 20:35:05 dm8000 user.warn kernel: [433773.778000] audio: xpt stop(3)
Dec 17 20:35:05 dm8000 user.warn kernel: [433773.778000] no decoder left in sync handling so disable xpt_sync
Dec 17 20:35:05 dm8000 user.warn kernel: [433773.778000] bcm_audio_channel_stop(3) done
Dec 17 20:35:05 dm8000 user.warn kernel: [433773.889000] start pcr0 on dmx 3 pid:1ff index 4
Dec 17 20:35:05 dm8000 user.warn kernel: [433773.891000] start audio on dmx 3 pid:203
Dec 17 20:35:05 dm8000 user.warn kernel: [433773.891000] audio xpt start
Dec 17 20:35:05 dm8000 user.warn kernel: [433773.891000] sync is off so we enable it
Dec 17 20:35:05 dm8000 user.warn kernel: [433773.891000] demux-index 3 pcr0pid 1ff
Dec 17 20:35:05 dm8000 user.warn kernel: [433773.891000] using 4 as pcr0 pidchannel
Dec 17 20:35:05 dm8000 user.warn kernel: [433773.891000] AC3
Dec 17 20:35:05 dm8000 user.warn kernel: [433773.892000] audio: decoder start 0
Dec 17 20:35:05 dm8000 user.warn kernel: [433773.903000] audio delay 18000 (200 ms)
Dec 17 20:35:05 dm8000 user.warn kernel: [433773.903000] total video delay: 18000 (200 ms)
Dec 17 20:35:05 dm8000 user.warn kernel: [433773.905000] start video0 on dmx 3 pid:1ff
Dec 17 20:35:05 dm8000 user.warn kernel: [433773.905000] total video delay: 18000 (200 ms)
Dec 17 20:35:05 dm8000 user.warn kernel: [433773.907000] VIDEO0: start decode
Dec 17 20:35:06 dm8000 user.warn kernel: [433774.450000] ch0: lock
Dec 17 20:35:06 dm8000 user.warn kernel: [433774.450000] RAP first pts 0x39249250, stc 0x39248a64, pcr valid
Dec 17 20:35:06 dm8000 user.warn kernel: [433774.752000] RAP sampling rate info isr
Dec 17 20:35:06 dm8000 user.warn kernel: [433774.948000] stop pcr0 on dmx 3 pid:1ff
Dec 17 20:35:06 dm8000 user.warn kernel: [433774.949000] stop video0 on dmx 3 pid:1ff
Dec 17 20:35:06 dm8000 user.warn kernel: [433774.949000] VIDEO0 use saved pts 0x1b0337a20 (ret 0)
Dec 17 20:35:06 dm8000 user.warn kernel: [433774.950000] VIDEO0: stop decode
Dec 17 20:35:06 dm8000 user.warn kernel: [433774.951000] VIDEO0: set blank to 1
Dec 17 20:35:06 dm8000 user.warn kernel: [433774.952000] audio: decoder stop
Dec 17 20:35:06 dm8000 user.warn kernel: [433774.969000] stop audio on dmx 3 pid:203
Dec 17 20:35:06 dm8000 user.warn kernel: [433774.969000] audio: xpt stop(2)
Dec 17 20:35:06 dm8000 user.warn kernel: [433774.969000] no decoder left in sync handling so disable xpt_sync
Dec 17 20:35:06 dm8000 user.warn kernel: [433774.969000] bcm_audio_channel_stop(2) done
Dec 17 20:35:07 dm8000 user.warn kernel: [433775.470000] start pcr0 on dmx 3 pid:2ff index 5
Dec 17 20:35:07 dm8000 user.warn kernel: [433775.472000] start audio on dmx 3 pid:303
Dec 17 20:35:07 dm8000 user.warn kernel: [433775.472000] audio xpt start
Dec 17 20:35:07 dm8000 user.warn kernel: [433775.473000] sync is off so we enable it
Dec 17 20:35:07 dm8000 user.warn kernel: [433775.473000] demux-index 3 pcr0pid 2ff
Dec 17 20:35:07 dm8000 user.warn kernel: [433775.473000] using 5 as pcr0 pidchannel
Dec 17 20:35:07 dm8000 user.warn kernel: [433775.473000] AC3
Dec 17 20:35:07 dm8000 user.warn kernel: [433775.474000] audio: decoder start 0
Dec 17 20:35:07 dm8000 user.warn kernel: [433775.485000] audio delay 18000 (200 ms)
Dec 17 20:35:07 dm8000 user.warn kernel: [433775.485000] total video delay: 18000 (200 ms)
Dec 17 20:35:07 dm8000 user.warn kernel: [433775.487000] start video0 on dmx 3 pid:2ff
Dec 17 20:35:07 dm8000 user.warn kernel: [433775.487000] total video delay: 18000 (200 ms)
Dec 17 20:35:07 dm8000 user.warn kernel: [433775.489000] VIDEO0: start decode
Dec 17 20:35:08 dm8000 user.warn kernel: [433776.266000] ch0: lock
Dec 17 20:35:08 dm8000 user.warn kernel: [433776.266000] RAP first pts 0x1980e8e62, stc 0x1a073fa8c, pcr valid
Dec 17 20:35:08 dm8000 user.warn kernel: [433776.266000] RAP pts error 0 PTS 0xcc074731, STC 0xd039fd48, type 0
Dec 17 20:35:08 dm8000 user.warn kernel: [433776.295000] ch0: lock
Dec 17 20:35:08 dm8000 user.warn kernel: [433776.597000] RAP sampling rate info isr
Dec 17 20:35:09 dm8000 user.warn kernel: [433777.180000] VIDEO0: first pts 0x1a0771e52
Dec 17 20:35:09 dm8000 user.warn kernel: [433777.180000] VIDEO0: framerate changed 3
Dec 17 20:35:09 dm8000 user.warn kernel: [433777.180000] VIDEO0: resolution changed (1920 1080)
Dec 17 20:35:09 dm8000 user.warn kernel: [433777.180000] VIDEO0: progressive changed (0)
Dec 17 20:35:09 dm8000 user.warn kernel: [433777.181000] set current avs auto aspect to 16:9
Dec 17 20:35:09 dm8000 user.warn kernel: [433777.181000] disable wss on display 0
Dec 17 20:35:09 dm8000 user.warn kernel: [433777.181000] set wss 7 on display 1
Dec 17 20:35:09 dm8000 user.warn kernel: [433777.182000] set sb to 3(1)
Dec 17 20:35:09 dm8000 user.warn kernel: [433777.331000] enable tsm0
Zuletzt bearbeitet von einem Moderator: