Dbox2 Nokia bootet immer wieder von vorne

[GOGOLALA]

Hallo Zusammen,

habe seit ein paar Tagen ein Problem.
Meine D-Box2 (Nokia) bootet jedes mal neu, habe schon mehrere Images mit Hallenberg aufgespielt, aber keine besserung

Du musst angemeldet sein, um Bilder zu sehen.

Habe mal ein Bootlog erstellt. Kann mir Jemand sagen was mit meiner Box passiert?

Spoiler

debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS debug: Got Block #0032debug: Got Block #0004debug: Got Block #0008debug: Got Block #0012debug: Got Block #0016debug: Got Block #0020debug: Got Block #0024debug: Got Block #0028debug: Got Block #0032debug: Got Block #0036 will verify ELF image, start= 0x800000, size= 174720 verify sig: 262 Branching to 0x40100 U-Boot 2011.06 (Tuxbox) (Jul 15 2011 - 08:36:14) CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache Board: DBOX2, Nokia, BMon V1.2 Watchdog enabled I2C: ready DRAM: 32 MiB Flash: 8 MiB Scanning JFFS2 FS: . | . / - . \ . | . / - . \ done. env: found console with value ttyS0 env: found lcd_inverse with value 0 env: found lcd_contrast with value 15 FB: ready In: serial Out: serial Err: serial Net: SCC LCD: ready Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select option (1-3), other keys to stop autoboot: 1 0 ............................................................... done Un-Protected 63 sectors ### FS (squashfs) loading 'vmlinuz' to 0x200000 ### FS load complete: 666609 bytes loaded to 0x200000 ## Booting kernel from Legacy Image at 00200000 ... Image Name: Linux-2.4.37.11-dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 666545 Bytes = 650.9 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Linux version 2.4.37.11-dbox2 (image@server) (gcc version 3.4.6) #5 Fr 15. Jul 08:37:12 CEST 2011 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs console=ttyS0,9600 dbox_duplex= Decrementer Frequency = 251625000/60 m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1) m8xx_wdt: keep-alive trigger installed (PITC: 0x2580) Console: colour dummy device 80x25 Calibrating delay loop... 66.76 BogoMIPS Memory: 30832k available (1132k kernel code, 344k data, 60k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc. squashfs: version 3.0 (2006/03/15) Phillip Lougher i2c-core.o: i2c core module version 2.6.1 (20010830) i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830) CPM UART driver version 0.04 ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2 pty: 256 Unix98 ptys configured half-duplex mode enabled eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:43:2f:77 loop: loaded (max 8 devices) D-Box 2 flash driver (size->0x800000 mem->0x10000000) D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank Intel/Sharp Extended Query Table at 0x0035 cfi_cmdset_0001: Erase suspend on write enabled Creating 6 MTD partitions on "D-Box 2 flash memory": 0x00000000-0x00020000 : "BR bootloader" 0x00020000-0x00040000 : "FLFS (U-Boot)" 0x00040000-0x005e0000 : "root (squashfs+lzma)" 0x005e0000-0x00800000 : "var (jffs2)" 0x00020000-0x00800000 : "Flash without bootloader" 0x00000000-0x00800000 : "Complete Flash" Linux video capture interface: v1.00 mice: PS/2 mouse device common for all mice NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (squashfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 60k init init started: BusyBox v1.18.5 (2011-08-01 18:48:25 CEST) starting pid 8, tty '': '/etc/init.d/rcS' mount: using /etc/fstab ##### Image-Version: Keywelt_Jul2011_V1.00 ##### Mon Aug 1 18:57:00 UTC 2011 event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $ tuxbox: no IDE-Interface detected Detected STB: Vendor: Nokia Model: D-BOX2 [i2c-8xx]: mpc 8xx i2c init [i2c-8xx]: adapter: 0 $Id: cam.c,v 1.33 2011/06/19 11:49:27 rhabarber1848 Exp $ $Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $ DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600). dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter $Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $ avia_av: $Id: avia_av_core.c,v 1.106 2011/06/19 11:49:27 rhabarber1848 Exp $ avia_av_core: Starting avia_av_wdt thread. avia_av: AVIA 600L found. avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $ avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $ avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $ avia_gt_core: autodetecting chip type... GTX avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $ avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $ avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.215 2011/06/19 11:51:17 rhabarber1848 Exp $ avia_gt_core: masking unhandled irq reg 1 bit 11 avia_gt_core: masking unhandled irq reg 1 bit 13 avia_gt_ucode: loaded ucode v0014 avia_gt_ucode: ucode section filters disabled. avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning... avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $ avia_gt_gv: set_input_size (width=720, height=576) avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $ avia_gt_pcm_set_rate(44100) avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $ avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $ avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $ avia_gt_core: Loaded AViA eNX/GTX driver avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $ avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) Console: switching to colour frame buffer device 82x32 avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device lcd.o: init lcd driver module lcd.o: found KS0713/SED153X lcd interface avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $ avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $ avia_oss: $Id: avia_gt_oss.c,v 1.28 2009/03/22 12:37:58 rhabarber1848 Exp $ avia_gt_pcm_set_rate(44100) avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.14 2011/06/19 11:49:27 rhabarber1848 Exp $ ifup: option with empty value " netmask" wget: can't connect to remote host (127.0.0.1): Network is unreachable ves1x93: Detected ves1893a rev2 DVB: registering frontend 0:0 (VES1893)... avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $ avia_gt_napi: $Id: avia_gt_napi.c,v 1.208 2011/06/19 11:51:17 rhabarber1848 Exp $ insmod: warning: kernel-module version mismatch multicam was compiled for kernel version 2.4.37-dbox2 while this kernel is version 2.4.37.11-dbox2 DBox2 Multicam Driver v1.01 skars & doz21 starting pid 166, tty '': '/etc/init.d/start' Please press Enter to activate this console. $Id: sectionsd.cpp,v 1.335 2011/06/19 12:31:44 rhabarber1848 Exp $ [sectionsd] FreeSat enabled [sectionsd] Caching max 3000 events [sectionsd] Caching 4 days [sectionsd] Caching 12 hours Extended Text [sectionsd] Events are old 120min after their end time /var/tuxbox/config/zapit/epgfilter.xml: No such file or directory /var/tuxbox/config/zapit/dvbtimefilter.xml: No such file or directory /var/tuxbox/config/mybouquets.xml: No such file or directory [timerd] woke up from timer? false! /var/plugins/operations camd_init /var/plugins/operations cardserver_start $Id: zapit.cpp,v 1.440k 2009/09/18 20:30:00 rhabarber1848 & Worschter & SnowHead Exp $ [zapit] PMT update enabled [frontend] uncommitted_switch_mode 0 auto_fec 0 /var/plugins/operations camd_start [getservices] /var/tuxbox/config/zapit/myservices.xml found. [getservices] dup transponder id 1 onid 85 [getservices] dup transponder id 2 onid 85 [getservices] dup transponder id 3 onid 85 [getservices] dup transponder id 11 onid 85 /var/tuxbox/config/zapit/ubouquets.xml: No such file or directory /tmp/currentservices.xml: No such file or directory [controld] Boxtype detected: (1, Nokia D-BOX2) [controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1 [CVideo::setVideoFormat] output format: 4:3(LB) /var/plugins/operations sect_renice starte capmtserver capmtserver provides pmt info, for non-enigma platforms starte CCcam neutrino: /lib/libpng12.so.0: no version information available (required by neutrino) neutrino: /lib/libpng12.so.0: no version information available (required by /lib/liblcddisplay.so.0) starting /bin/neutrino [neutrino] frameBuffer Instance created 812k video mem avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) [neutrino] enable flash [neutrino] Software update enabled [lcdd] time-skin not found -> using default... [lcdd] weekday-skin not found -> using default... [lcdd] date-skin not found -> using default... [lcdd] month-skin not found -> using default... [LCDFONT] initializing core... [LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular) [LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold) [LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold) [LCDFONT] Intializing font cache... [LCDFONT] FTC_Face_Requester (Fix14/Bold) [neutrino] SetupFonts filename: /share/fonts/micron.ttf fontname: Micron [rcinput] no file /var/tuxbox/config/rc.conf was found /dev/input/event1: No such file or directory [neutrino] menue setup [neutrino] init menus... [neutrino] GUI-Personalize instance created... [neutrino] found esound, adding personalized esound entry to mainmenue [network config] Instance created [neutrino] setRepeat: delay=150 period=125 use kernel-repeat: no [neutrino] registering as event client [scan-setup] received 27 sats [sectionsd] getUTC: read: Connection timed out [CVideo::setVideoFormat] output format: 16:9 [LCDFONT] FTC_Face_Requester (Fix15/Bold) [zapit] LOCK LOST! trying rezap... channel: 'Das Erste' [basicsocket] receive timed out. waiting process 450 [neutrino] no file /var/tuxbox/config/init.end was found [neutrino] initialized everything busy /tmp/zapit.sock zap failed! /bin/nhttpd: /lib/libpng12.so.0: no version information available (required by /lib/liblcddisplay.so.0) Digital audio output turned off [basicsocket] send_data: Broken pipe (n = 8/8, pid = 421) [controld] videoOutput off [controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=0 [controld] SAAIOSMODE: Invalid argument [CVideo::setVideoFormat] output format: unknown (-1) [CVideo] SAAIOSWSS: Invalid argument [zapit] LOCK LOST! trying rezap... channel: 'Das Erste' Digital audio output turned on [yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0) [LCDFONT] initializing core... [LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular) [LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold) [LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular) [LCDFONT] Intializing font cache... [controld] videoOutput on [controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1 [CVideo::setVideoFormat] output format: 16:9 [zapit] LOCK LOST! trying rezap... channel: 'Das Erste' Digital audio output turned off Digital audio output turned on [controld] videoOutput off [controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=0 [controld] SAAIOSMODE: Invalid argument [CVideo::setVideoFormat] output format: unknown (-1) [CVideo] SAAIOSWSS: Invalid argument [zapit] LOCK LOST! trying rezap... channel: 'Das Erste' [controld] videoOutput on [controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1 [CVideo::setVideoFormat] output format: 16:9 [zapit] LOCK LOST! trying rezap... channel: 'Das Erste' Digital audio output turned off [zapit] LOCK LOST! trying rezap... channel: 'Das Erste' [yhttpd] Webserver starting... [sectionsd] getUTC: read: Connection timed out [controld] videoOutput off [controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=0 [controld] SAAIOSMODE: Invalid argument [CVideo::setVideoFormat] output format: unknown (-1) [CVideo] SAAIOSWSS: Invalid argument [zapit] LOCK LOST! trying rezap... channel: 'Das Erste' [zapit] LOCK LOST! trying rezap... channel: 'Das Erste' [zapit] LOCK LOST! trying rezap... channel: 'Das Erste' [zapit] LOCK LOST! trying rezap... channel: 'Das Erste' [zapit] LOCK LOST! trying rezap... channel: 'Das Erste' [zapit] LOCK LOST! trying rezap... channel: 'Das Erste' [sectionsd] getUTC: read: Connection timed out [zapit] LOCK LOST! trying rezap... channel: 'Das Erste' [zapit] LOCK LOST! trying rezap... channel: 'Das Erste' [zapit] LOCK LOST! trying rezap... channel: 'Das Erste' [zapit] LOCK LOST! trying rezap... channel: 'Das Erste' [zapit] LOCK LOST! trying rezap... channel: 'Das Erste' [zapit] LOCK LOST! trying rezap... channel: 'Das Erste' [zapit] LOCK LOST! trying rezap... channel: 'Das Erste' [sectionsd] getUTC: read: Connection timed out [zapit] LOCK LOST! trying rezap... channel: 'Das Erste' [zapit] LOCK LOST! trying rezap... channel: 'Das Erste' [zapit] LOCK LOST! trying rezap... channel: 'Das Erste' [zapit] LOCK LOST! trying rezap... channel: 'Das Erste' [zapit] LOCK LOST! trying rezap... channel: 'Das Erste' [zapit] LOCK LOST! trying rezap... channel: 'Das Erste' [sectionsd] getUTC: read: Connection timed out [zapit] LOCK LOST! trying rezap... channel: 'Das Erste' [zapit] LOCK LOST! trying rezap... channel: 'Das Erste' [zapit] LOCK LOST! trying rezap... channel: 'Das Erste' [zapit] LOCK LOST! trying rezap... channel: 'Das Erste' [zapit] LOCK LOST! trying rezap... channel: 'Das Erste' [zapit] LOCK LOST! trying rezap... channel: 'Das Erste' [sectionsd] getUTC: read: Connection timed out [zapit] LOCK LOST! trying rezap... channel: 'Das Erste' [zapit] LOCK LOST! trying rezap... channel: 'Das Erste' [zapit] LOCK LOST! trying rezap... channel: 'Das Erste' Digital audio output turned on [controld] videoOutput on [controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1 [CVideo::setVideoFormat] output format: 16:9 [zapit] LOCK LOST! trying rezap... channel: 'Das Erste' [zapit] LOCK LOST! trying rezap... channel: 'Das Erste' [zapit] LOCK LOST! trying rezap... channel: 'Das Erste' [zapit] LOCK LOST! trying rezap... channel: 'Das Erste' [sectionsd] getUTC: read: Connection timed out zap failed! [zapit] LOCK LOST! trying rezap... channel: 'ZDF' [zapit] LOCK LOST! trying rezap... channel: 'ZDF' [zapit] LOCK LOST! trying rezap... channel: 'ZDF' [zapit] LOCK LOST! trying rezap... channel: 'ZDF' [zapit] LOCK LOST! trying rezap... channel: 'ZDF' [sectionsd] getUTC: read: Connection timed out [zapit] LOCK LOST! trying rezap... channel: 'ZDF' [zapit] LOCK LOST! trying rezap... channel: 'ZDF' [zapit] LOCK LOST! trying rezap... channel: 'ZDF' [LCDFONT] FTC_Face_Requester (Fix12/Regular) [zapit] LOCK LOST! trying rezap... channel: 'ZDF' [zapit] LOCK LOST! trying rezap... channel: 'ZDF' [zapit] LOCK LOST! trying rezap... channel: 'ZDF' [zapit] LOCK LOST! trying rezap... channel: 'ZDF' [sectionsd] getUTC: read: Connection timed out [controld] videoOutput off [controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=0 [controld] SAAIOSMODE: Invalid argument [CVideo::setVideoFormat] output format: unknown (-1) [CVideo] SAAIOSWSS: Invalid argument [zapit] LOCK LOST! trying rezap... channel: 'ZDF' Digital audio output turned off Digital audio output turned on [controld] videoOutput on [controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1 [CVideo::setVideoFormat] output format: 16:9 [zapit] LOCK LOST! trying rezap... channel: 'ZDF' Digital audio output turned off Digital audio output turned on [controld] videoOutput off [controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=0 [controld] SAAIOSMODE: Invalid argument [CVideo::setVideoFormat] output format: unknown (-1) [CVideo] SAAIOSWSS: Invalid argument [controld] videoOutput on [controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1 [CVideo::setVideoFormat] output format: 16:9 [zapit] LOCK LOST! trying rezap... channel: 'ZDF' Digital audio output turned off Digital audio output turned on [controld] videoOutput off [controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=0 [controld] SAAIOSMODE: Invalid argument [CVideo::setVideoFormat] output format: unknown (-1) [CVideo] SAAIOSWSS: Invalid argument [controld] videoOutput on [controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1 [CVideo::setVideoFormat] output format: 16:9 [zapit] LOCK LOST! trying rezap... channel: 'ZDF' Digital audio output turned off Digital audio output turned on [controld] videoOutput off [controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=0 [controld] SAAIOSMODE: Invalid argument [CVideo::setVideoFormat] output format: unknown (-1) [CVideo] SAAIOSWSS: Invalid argument [controld] videoOutput on [controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1 [CVideo::setVideoFormat] output format: 16:9 [zapit] LOCK LOST! trying rezap... channel: 'ZDF' Digital audio output turned off Digital audio output turned on

 

[Warpilein]

AW: Dbox2 Nokia bootet immer wieder von vorne

So einen log packt man in einem spoiler, wenn ich nachher am PC bin such ich dir eben was raus für dein Problem

Gesendet von meinem E310 mit Tapatalk 2

 

[GOGOLALA]

AW: Dbox2 Nokia bootet immer wieder von vorne

Sorry

Spoiler

spoiler ist mir nicht mehr eingefallen

 

[Warpilein]

AW: Dbox2 Nokia bootet immer wieder von vorne

mAch das Log mal bitte neu und pack es in einem Spoiler so ist die formatierung nicht vorhanden und das Lesen ist echt eine Qual

 

[GOGOLALA]

AW: Dbox2 Nokia bootet immer wieder von vorne

Bitte schön...........

Spoiler

Édebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.2 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-77.77.60.07.00.00-f6
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032debug: Got Block #0004debug: Got Block #0008debug: Got Block #0012debug: Got Block #0016debug: Got Block #0020debug: Got Block #0024debug: Got Block #0028debug: Got Block #0032debug: Got Block #0036

will verify ELF image, start= 0x800000, size= 174720
verify sig: 262
Branching to 0x40100


U-Boot 2011.06 (Tuxbox) (Jul 15 2011 - 08:36:14)

CPU: PPC823ZTnnB2 at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Nokia, BMon V1.2
Watchdog enabled
I2C: ready
DRAM: 32 MiB
Flash: 8 MiB
Scanning JFFS2 FS: . | . / - . \ . | . / - . \ done.
env: found console with value ttyS0
env: found lcd_inverse with value 0
env: found lcd_contrast with value 15
FB: ready
In: serial
Out: serial
Err: serial
Net: SCC
LCD: ready

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 1 0
............................................................... done
Un-Protected 63 sectors
### FS (squashfs) loading 'vmlinuz' to 0x200000
### FS load complete: 666609 bytes loaded to 0x200000
## Booting kernel from Legacy Image at 00200000 ...
Image Name: Linux-2.4.37.11-dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 666545 Bytes = 650.9 KiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.37.11-dbox2 (image@server) (gcc version 3.4.6) #5 Fr 15. Jul 08:37:12 CEST 2011
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs console=ttyS0,9600 dbox_duplex=
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30832k available (1132k kernel code, 344k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
half-duplex mode enabled
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:43:2f:77
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x005e0000 : "root (squashfs+lzma)"
0x005e0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.18.5 (2011-08-01 18:48:25 CEST)
starting pid 8, tty '': '/etc/init.d/rcS'
mount: using /etc/fstab


##### Image-Version: Keywelt_Jul2011_V1.00 #####

Mon Aug 1 18:57:00 UTC 2011
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
tuxbox: no IDE-Interface detected
Detected STB:
Vendor: Nokia
Model: D-BOX2
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
$Id: cam.c,v 1.33 2011/06/19 11:49:27 rhabarber1848 Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.106 2011/06/19 11:49:27 rhabarber1848 Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av: AVIA 600L found.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.215 2011/06/19 11:51:17 rhabarber1848 Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.28 2009/03/22 12:37:58 rhabarber1848 Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.14 2011/06/19 11:49:27 rhabarber1848 Exp $
ifup: option with empty value " netmask"
wget: can't connect to remote host (127.0.0.1): Network is unreachable
ves1x93: Detected ves1893a rev2
DVB: registering frontend 0:0 (VES1893)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.208 2011/06/19 11:51:17 rhabarber1848 Exp $
insmod: warning: kernel-module version mismatch
multicam was compiled for kernel version 2.4.37-dbox2
while this kernel is version 2.4.37.11-dbox2
DBox2 Multicam Driver v1.01 skars & doz21
starting pid 166, tty '': '/etc/init.d/start'

Please press Enter to activate this console. $Id: sectionsd.cpp,v 1.335 2011/06/19 12:31:44 rhabarber1848 Exp $
[sectionsd] FreeSat enabled
[sectionsd] Caching max 3000 events
[sectionsd] Caching 4 days
[sectionsd] Caching 12 hours Extended Text
[sectionsd] Events are old 120min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/zapit/dvbtimefilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
[timerd] woke up from timer? false!
/var/plugins/operations camd_init
/var/plugins/operations cardserver_start
$Id: zapit.cpp,v 1.440k 2009/09/18 20:30:00 rhabarber1848 & Worschter & SnowHead Exp $
[zapit] PMT update enabled
[frontend] uncommitted_switch_mode 0 auto_fec 0
/var/plugins/operations camd_start
[getservices] /var/tuxbox/config/zapit/myservices.xml found.
[getservices] dup transponder id 1 onid 85
[getservices] dup transponder id 2 onid 85
[getservices] dup transponder id 3 onid 85
[getservices] dup transponder id 11 onid 85
/var/tuxbox/config/zapit/ubouquets.xml: No such file or directory
/tmp/currentservices.xml: No such file or directory
starte capmtserver
[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1

capmtserver provides pmt info, for non-enigma platforms

[CVideo::setVideoFormat] output format: 4:3(LB)
starte CCcam
/var/plugins/operations sect_renice
neutrino: /lib/libpng12.so.0: no version information available (required by neutrino)
neutrino: /lib/libpng12.so.0: no version information available (required by /lib/liblcddisplay.so.0)
starting /bin/neutrino
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
[neutrino] SetupFonts filename: /share/fonts/micron.ttf fontname: Micron
[rcinput] no file /var/tuxbox/config/rc.conf was found
/dev/input/event1: No such file or directory
[neutrino] menue setup
[neutrino] init menus...
[neutrino] GUI-Personalize instance created...
[neutrino] found esound, adding personalized esound entry to mainmenue
[network config] Instance created
[neutrino] setRepeat: delay=150 period=125 use kernel-repeat: no
[neutrino] registering as event client
[scan-setup] received 27 sats
[sectionsd] getUTC: read: Connection timed out
[CVideo::setVideoFormat] output format: 16:9
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[zapit] LOCK LOST! trying rezap... channel: 'ZDF'
[basicsocket] receive timed out. waiting process 461
[neutrino] no file /var/tuxbox/config/init.end was found
[neutrino] initialized everything
busy /tmp/zapit.sock
zap failed!
[basicsocket] send_data: Broken pipe (n = 8/8, pid = 430)
[zapit] LOCK LOST! trying rezap... channel: 'ZDF'
/bin/nhttpd: /lib/libpng12.so.0: no version information available (required by /lib/liblcddisplay.so.0)
[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[zapit] LOCK LOST! trying rezap... channel: 'ZDF'
[zapit] LOCK LOST! trying rezap... channel: 'ZDF'
[zapit] LOCK LOST! trying rezap... channel: 'ZDF'
[zapit] LOCK LOST! trying rezap... channel: 'ZDF'
[yhttpd] Webserver starting...
[sectionsd] getUTC: read: Connection timed out
[zapit] LOCK LOST! trying rezap... channel: 'ZDF'
[zapit] LOCK LOST! trying rezap... channel: 'ZDF'
[zapit] LOCK LOST! trying rezap... channel: 'ZDF'
[zapit] LOCK LOST! trying rezap... channel: 'ZDF'
[zapit] LOCK LOST! trying rezap... channel: 'ZDF'
[zapit] LOCK LOST! trying rezap... channel: 'ZDF'
[sectionsd] getUTC: read: Connection timed out
[zapit] LOCK LOST! trying rezap... channel: 'ZDF'

 

[Warpilein]

AW: Dbox2 Nokia bootet immer wieder von vorne

uff das könnte was mit zapit zu tun haben, bin nun aus der DB2 fehlersuche schon einige jahre raus aber das ist das was mir direkt auffält, anderes image (nicht unbedingt KW) hast du ja schon probiert sagtest du, oder hast du immer KW benutzt?

 

[GOGOLALA]

AW: Dbox2 Nokia bootet immer wieder von vorne

Ja, zwei von KW.
Teste nochmal Ein anderes, und mache ein Bootlog.

 

[Warpilein]

AW: Dbox2 Nokia bootet immer wieder von vorne

Am besten dann nicht von kW sondern z. B das Zebradem

Gesendet von meinem E310 mit Tapatalk 2

 

[GOGOLALA]

AW: Dbox2 Nokia bootet immer wieder von vorne

Also,
habe jetzt ein Zebradem Images genommen, und habe das gleiche Problem:fie:

Spoiler

Édebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.2 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-77.77.60.07.00.00-f6
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032debug: Got Block #0004debug: Got Block #0008debug: Got Block #0012debug: Got Block #0016debug: Got Block #0020debug: Got Block #0024debug: Got Block #0028debug: Got Block #0032debug: Got Block #0036

will verify ELF image, start= 0x800000, size= 163284
verify sig: 262
Branching to 0x40000


U-Boot 1.2.0 (Tuxbox) (Mar 27 2009 - 00:59:10)

CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Nokia, BMon V1.2
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . | / - . \ | / . - \ | / - \ done.
env: found console with value ttyS0
env: found lcd_inverse with value 0
env: found lcd_contrast with value 15
FB: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
LCD: ready

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 1 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 670496 bytes loaded to 0x100000
............................................................... done
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 670432 Bytes = 654.7 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.37-dbox2 (zebradem@Zebradem-Image) (gcc version 3.4.6) #47 Fr 27. Mär 00:59:51 CET 2009
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0,9600 dbox_duplex= root=/dev/mtdblock2 rootfstype=squashfs
Decrementer Frequency = 251625000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x2580)
Console: colour dummy device 80x25
Calibrating delay loop... 66.76 BogoMIPS
Memory: 30824k available (1140k kernel code, 344k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
half-duplex mode enabled
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:43:2f:77
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x004c0000 : "root (squashfs+lzma)"
0x004c0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.7.2 (2009-03-27 01:07:31 CET)
mount: using /etc/fstab
mount: mounting /dev/ide/host0/bus0/target0/lun0/part2 on /hdd failed: No such device
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
tuxbox: no IDE-Interface detected
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Detected STB:
Vendor: Nokia
Model: D-BOX2
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.28 2009/03/22 12:37:58 rhabarber1848 Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
DVB: registering frontend 0:0 (VES1893)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
Loading /share/keymaps/i386/qwertz/de-latin1.kmap.gz

Please press Enter to activate this console. Thu Jan 1 01:00:00 CET 1970
$Id: sectionsd.cpp,v 1.288 2009/02/28 13:57:50 seife Exp $
[sectionsd] Caching max 6000 events
[sectionsd] Caching 14 days
[sectionsd] Caching 6 hours Extended Text
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
[timerd] woke up from timer? false!
$Id: zapit.cpp,v 1.425 2009/03/22 22:06:22 rhabarber1848 Exp $
[frontend] uncommitted_switch_mode 0 auto_fec 0
/tmp/currentservices.xml: No such file or directory
[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
void controld_main():782
[CVideo::setVideoFormat] output format: 4:3(LB)
[CVideo::setCroppingMode] setting to letterbox
[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[yhttpd] Webserver starting...
[camd] ca system id: 1702
neutrino: /lib/libpng12.so.0: no version information available (required by neutrino)
starting /bin/neutrino
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
[neutrino] can not use input repeat on fd_rc[0]: 22 (Invalid argument)
[neutrino] setRepeat: delay=250 period=0 use kernel-repeat: no
[neutrino] received 18 sats
[neutrino] registering as event client
[basicsocket] send_data: Resource temporarily unavailable
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[sectionsd] getUTC: read: Connection timed out
[neutrino] no file /var/tuxbox/config/init.end was found
[neutrino] initialized everything
zap failed!
avia_gt_core: masking unhandled irq reg 0 bit 6
avia_gt_core: masking unhandled irq reg 0 bit 7
zapit shot down
Waiting for zapit (max. 9 seconds)
CXA2092 found
umount: cannot umount /var: Device or resource busy
The system is going down NOW!
Sending SIGTERM to all processes
[yhttpd] !!! SIGNAL !!! :15!
[yhttpd] No special SIGNAL-Handler:15!
[yhttpd] stop requested......
Sending SIGKILL to all processes
Requesting system halt

Ich gehe davon aus, das der SEC Ram hinüber ist:emoticon-0179-headb

 

[Warpilein]

AW: Dbox2 Nokia bootet immer wieder von vorne

Entweder das oder Frontprozessor oder der Flash speicher hat einen schatten .... währe nun meine 3 vermutungen .... was mal schauen könntest währe ob du irgendwo einen defekten kondensator siehst oder ähnliches das die spannung nicht mehr sauber anliegt aber glaube ich fast nicht dran