Dies ist eine mobil optimierte Seite, die schnell lädt. Wenn Sie die Seite ohne Optimierung laden möchten, dann klicken Sie auf diesen Text.

CS...FritzBox? ThinClient? Mit oder ohne IPC? Newbie :-(

    Nobody is reading this thread right now.
AW: CS...FritzBox? ThinClient? Mit oder ohne IPC? Newbie :-(

Bei dir is alles durcheinander. Lösch mal den HD+ Reader in der Oscam.server. Dann is der Camd3emu mit deiner V14(Smargo) eingetragen als Reader, erstmal komplett mit # auskommentieren. Schön eins nach dem anderen .

V14

[reader]
label = easymouse_skyde <<<anpassen
protocol = mouse oder smargo
device = /dev/ttyUSB0
caid = 098C
boxid = 12345678
ins7e11 = 15 <<< ggf. erst ohne fastmode probieren
detect = cd
mhz = 600 <<< auf 357mhz oder 368mhz oder komplett weg lassen
ident = 098C:000000
group = 3 <<<anpassen
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-g = 1
auprovid = 00098C
ndsversion = 2

Wenn die Karte dann läuft kann man sich um den Emu kümmern. Was soll damit überhaupt erhellt werden?


MfG
 
AW: CS...FritzBox? ThinClient? Mit oder ohne IPC? Newbie :-(

------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Sep 28 22:36:35 2013
-------------------------------------------------------------------------------
2013/09/28 22:36:35 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8938 (i486-linux-gnu)
2013/09/28 22:36:35 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 3935
2013/09/28 22:36:35 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2013/09/28 22:36:35 0 s signal handling initialized
2013/09/28 22:36:35 0 s newcamd: initialized (fd=5, port=22000, ip=192.168.178.50)
2013/09/28 22:36:35 0 s -> CAID: 1830 PROVID: 003411
2013/09/28 22:36:35 0 s cccam: Bind request failed (Address already in use), waiting another 119 seconds
2013/09/28 22:36:36 0 s cccam: Bind request failed (Address already in use), waiting another 118 seconds
2013/09/28 22:36:37 0 s cccam: Bind request failed (Address already in use), waiting another 117 seconds
2013/09/28 22:36:38 0 s cccam: Bind request failed (Address already in use), waiting another 116 seconds
2013/09/28 22:36:39 0 s cccam: Bind request failed (Address already in use), waiting another 115 seconds
2013/09/28 22:36:40 0 s cccam: Bind request failed (Address already in use), waiting another 114 seconds
2013/09/28 22:36:41 0 s cccam: Bind request failed (Address already in use), waiting another 113 seconds
 
Zuletzt bearbeitet von einem Moderator:
AW: CS...FritzBox? ThinClient? Mit oder ohne IPC? Newbie :-(

Poste mal bitte deine Oscam.conf und Oscam.server.


MfG
 
AW: CS...FritzBox? ThinClient? Mit oder ohne IPC? Newbie :-(

@ Turalu

Bitte alles in Spoilern Posten
 
AW: CS...FritzBox? ThinClient? Mit oder ohne IPC? Newbie :-(

Logauszug

------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Sep 28 22:36:35 2013
-------------------------------------------------------------------------------
2013/09/28 22:36:35 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8938 (i486-linux-gnu)
2013/09/28 22:36:35 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 3935
2013/09/28 22:36:35 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2013/09/28 22:36:35 0 s signal handling initialized
2013/09/28 22:36:35 0 s newcamd: initialized (fd=5, port=22000, ip=192.168.178.50)
2013/09/28 22:36:35 0 s -> CAID: 1830 PROVID: 003411
2013/09/28 22:36:35 0 s cccam: Bind request failed (Address already in use), waiting another 119 seconds
2013/09/28 22:36:36 0 s cccam: Bind request failed (Address already in use), waiting another 118 seconds
2013/09/28 22:36:37 0 s cccam: Bind request failed (Address already in use), waiting another 117 seconds
2013/09/28 22:36:38 0 s cccam: Bind request failed (Address already in use), waiting another 116 seconds
2013/09/28 22:36:39 0 s cccam: Bind request failed (Address already in use), waiting another 115 seconds
2013/09/28 22:36:40 0 s cccam: Bind request failed (Address already in use), waiting another 114 seconds
2013/09/28 22:36:41 0 s cccam: Bind request failed (Address already in use), waiting another 113 seconds
 
AW: CS...FritzBox? ThinClient? Mit oder ohne IPC? Newbie :-(

ooscam.conf
# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r8938
# Read more:
Sie müssen registriert sein, um Links zu sehen.


[global]
disablelog = 0
loghistorysize = 4096
serverip = 192.168.178.50
logfile = /var/log/ipc/OScam.log
logduplicatelines = 0
pidfile =
disableuserfile = 1
disablemail = 1
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2500
fallbacktimeout_percaid =
clientmaxidle = 120
bindwait = 120
netprio = 0
sleep = 0
unlockparental = 0
nice = 99
maxlogsize = 2480
waitforcards = 1
waitforcards_extra_delay = 500
preferlocalcards = 0
readerrestartseconds = 5
dropdups = 0
block_same_ip = 1
block_same_name = 1
usrfile =
mailfile =
cwlogdir =
emmlogdir =
lb_mode = 0
lb_save = 0
lb_nbest_readers = 1
lb_nfb_readers = 1
lb_min_ecmcount = 5
lb_max_ecmcount = 500
lb_reopen_seconds = 30
lb_retrylimit = 0
lb_stat_cleanup = 336
lb_max_readers = 0
lb_auto_betatunnel = 1
lb_auto_betatunnel_mode = 0
lb_auto_betatunnel_prefer_beta= 50
lb_savepath =
lb_retrylimits =
lb_nbest_percaid =
lb_noproviderforcaid =
lb_auto_timeout = 0
lb_auto_timeout_p = 30
lb_auto_timeout_t = 300
double_check_caid =
ecmfmt =
resolvegethostbyname = 0
failbantime = 0
failbancount = 0
suppresscmd08 = 0
double_check = 0

[newcamd]
port = 22000@1830:003411
serverip = 0.0.0.0
allowed =
key = 0102030405060708091011121314
keepalive = 0
mgclient = 0

[cccam]
port = 22000
serverip = 192.168.178.50
nodeid = 4D16AEB410FB1504
version = 2.0.11
reshare = 10
reshare_mode = 4
ignorereshare = 0
forward_origin_card = 0
stealth = 0
updateinterval = 240
minimizecards = 0
keepconnected = 1
recv_timeout = 2000

[webif]
httpport = 16002
serverip = 0.0.0.0
httpuser = oscam
httppwd = oscam
httpcss =
httpjscript =
httpscript =
httptpl =
httphelplang = en
httpcert =
http_prepend_embedded_css = 0
httprefresh = 15
httphideidleclients = 0
httphidetype =
httpshowpicons = 0
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
httpreadonly = 0
httpsavefullcfg = 1
httpforcesslv3 = 0
httpdyndns =
aulow = 30
hideclient_to = 25



- oscam.server
# OSCam Konfiguration IPC

[reader]
enable = 1
label = v14
protocol = mouse
detect = CD
group = 1
emmcache = 1,3,2
device = /dev/ttyUSB0
#n3_rsakey = BF35xxxxxxxxxxD5
#n3_boxkey = A76xxxxxxxxxx37C


[reader]
label = camd3emu
enable = 1
protocol = smartreader
device = Serial:Reader 81F58FE
user = test
password = test1
group = 1
 
AW: CS...FritzBox? ThinClient? Mit oder ohne IPC? Newbie :-(

Oscam.conf

# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r8938
# Read more:
Sie müssen registriert sein, um Links zu sehen.


[global]
logfile = /var/log/ipc/OScam.log
nice = -1
maxlogsize = 256



[newcamd]
port = 22000@098C:000000
key = 0102030405060708091011121314
keepalive = 1

[cccam]
port = 22000
serverip = 192.168.178.50
nodeid = 4D16AEB410FB1504
version = 2.0.11
reshare = 1
ignorereshare = 1

[webif]
httpport = 16002
serverip = 192.168.178.50
httpuser = oscam
httppwd = oscam
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

Oscam.server

[reader]
enable = 1
label = v14
protocol = mouse
detect = CD
boxid = 12345678
caid = 098C
group = 1
emmcache = 1,1,2
device = /dev/ttyUSB0


[reader]
label = camd3emu
enable = 1
protocol = smartreader
device = Ip,Port
user = test
password = test1
group = 1

Sollte so erstmal laufen. Dennoch solltest du dich noch etwas in die Materie einlesen. Die V14 kann man später noch im fastmode laufen lassen.


MfG
 
AW: CS...FritzBox? ThinClient? Mit oder ohne IPC? Newbie :-(

Hallo

ich sag nochmal vielen Dank, aber...haut net hin ich hab hier ne C Line zum test über CCcam 2.3.0 - die läuft...die Oscam will net so recht...

Für heute geb ich auf...trotzdem, klasse Unterstützung!!

Danke, und Gruß aus München
 
AW: CS...FritzBox? ThinClient? Mit oder ohne IPC? Newbie :-(

Ohne log kann man nur raten. Ist denn das Web Interface von Oscam erreichbar? Wenn ja was steht da im Status?


MfG
 
AW: CS...FritzBox? ThinClient? Mit oder ohne IPC? Newbie :-(

Oscam Wif ist erreichbar.
[TABLE="class: status, width: 100%"]
[TR]
[TH="class: statuscol0"]hide[/TH]
[TH="class: statuscol1"]Thread ID[/TH]
[TH="class: statuscol2"]Type[/TH]
[TH="class: statuscol3"]ID[/TH]
[TH="class: statuscol4"]Label[/TH]
[TH="class: statuscol5"]AU[/TH]
[TH="class: statuscol6"]Crypted[/TH]
[TH="class: statuscol7"]Address[/TH]
[TH="class: statuscol8"]Port[/TH]
[TH="class: statuscol9"]Protocol[/TH]
[TH="class: statuscol10"]Login[/TH]
[TH="class: statuscol11"]Online[/TH]
[TH="class: statuscol12"]CAID:SRVID[/TH]
[TH="class: statuscol13"]Current Channel[/TH]
[TH="class: statuscol14"]LB Value/ Reader[/TH]
[TH="class: statuscol15"]Idle[/TH]
[TH="class: statuscol16"]Status[/TH]
[/TR]
[TR="class: s"]
[TD="class: statuscol0"]
Sie müssen registriert sein, um Links zu sehen.
[/TD]
[TD="class: statuscol1"]0x9681488 [/TD]
[TD="class: statuscol2"]s[/TD]
[TD="class: statuscol3"]0[/TD]
[TD="class: statuscol4"]root[/TD]
[TD="class: statuscol5"][/TD]
[TD="class: statuscol6"][/TD]
[TD="class: statuscol7"]127.0.0.1[/TD]
[TD="class: statuscol8"]0[/TD]
[TD="class: statuscol9"]server[/TD]
[TD="class: statuscol10"]29.09.13 01:33:33[/TD]
[TD="class: statuscol11"]00:46:08[/TD]
[TD="class: statuscol12"]0000:0000[/TD]
[TD="class: statuscol13"][/TD]
[TD="class: statuscol14"][/TD]
[TD="class: statuscol15"]00:44:09[/TD]
[TD="class: statuscol16"]OK[/TD]
[/TR]
[TR="class: h"]
[TD="class: statuscol0"]
Sie müssen registriert sein, um Links zu sehen.
[/TD]
[TD="class: statuscol1"]0x968a4e0 [/TD]
[TD="class: statuscol2"]h[/TD]
[TD="class: statuscol3"]1[/TD]
[TD="class: statuscol4"]root[/TD]
[TD="class: statuscol5"][/TD]
[TD="class: statuscol6"][/TD]
[TD="class: statuscol7"]127.0.0.1[/TD]
[TD="class: statuscol8"]0[/TD]
[TD="class: statuscol9"]http[/TD]
[TD="class: statuscol10"]29.09.13 01:35:32[/TD]
[TD="class: statuscol11"]00:44:09[/TD]
[TD="class: statuscol12"]0000:0000[/TD]
[TD="class: statuscol13"][/TD]
[TD="class: statuscol14"][/TD]
[TD="class: statuscol15"]00:03:08[/TD]
[TD="class: statuscol16"]OK[/TD]
[/TR]
[/TABLE]

Welches log soll ich denn posten?
 
AW: CS...FritzBox? ThinClient? Mit oder ohne IPC? Newbie :-(

logfile = /var/log/ipc/OScam.log

Diese log vom Serverstart bis zum Klientzugriff.
 
AW: CS...FritzBox? ThinClient? Mit oder ohne IPC? Newbie :-(

Nochmal alles...

logfile:
------------------------------------------------------------------------------
>> OSCam << cardserver started at Sun Sep 29 02:34:31 2013
-------------------------------------------------------------------------------
2013/09/29 02:34:31 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8938 (i486-linux-gnu)
2013/09/29 02:34:31 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 32637
2013/09/29 02:34:31 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2013/09/29 02:34:31 0 s signal handling initialized
2013/09/29 02:34:31 0 s newcamd: initialized (fd=5, port=22000)
2013/09/29 02:34:31 0 s -> CAID: 098C PROVID: 000000
2013/09/29 02:34:31 0 s cccam: Bind request failed (Address already in use), waiting another 119 seconds
2013/09/29 02:34:32 0 s cccam: Bind request failed (Address already in use), waiting another 118 seconds
2013/09/29 02:34:33 0 s cccam: Bind request failed (Address already in use), waiting another 117 seconds
2013/09/29 02:34:34 0 s cccam: Bind request failed (Address already in use), waiting another 116 seconds
2013/09/29 02:34:35 0 s cccam: Bind request failed (Address already in use), waiting another 115 seconds
2013/09/29 02:34:36 0 s cccam: Bind request failed (Address already in use), waiting another 114 seconds
2013/09/29 02:34:37 0 s cccam: Bind request failed (Address already in use), waiting another 113 seconds
2013/09/29 02:34:38 0 s cccam: Bind request failed (Address already in use), waiting another 112 seconds
2013/09/29 02:34:39 0 s cccam: Bind request failed (Address already in use), waiting another 111 seconds
2013/09/29 02:34:40 0 s cccam: Bind request failed (Address already in use), waiting another 110 seconds

Oscam.conf

# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r8938
# Read more:
Sie müssen registriert sein, um Links zu sehen.


[global]
logfile = /var/log/ipc/OScam.log
nice = -1
maxlogsize = 256

[newcamd]
port = 22000@098C:000000
key = 0102030405060708091011121314
keepalive = 1

[cccam]
port = 12000
serverip = 192.168.178.50
nodeid = 4D16AEB410FB1504
version = 2.0.11
reshare = 1
ignorereshare = 1

[webif]
httpport = 16002
serverip = 192.168.178.50
httpuser = oscam
httppwd = oscam
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

oscam.server
[reader]
enable = 1
label = v14
protocol = mouse
detect = CD
boxid = 12345678
caid = 098C
group = 1
emmcache = 1,1,2
device = /dev/ttyUSB0


[reader]
label = camd3emu
enable = 1
protocol = smartreader
device = 192.168.178.50, 22000
user = test
password = test1
group = 1
 
AW: CS...FritzBox? ThinClient? Mit oder ohne IPC? Newbie :-(

Oscam.conf

# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r8938
# Read more:
Sie müssen registriert sein, um Links zu sehen.


[global]
logfile = /var/log/ipc/OScam.log
nice = -1
maxlogsize = 256
waitforcards = 1

[newcamd]
port = 22000@098C:000000
key = 0102030405060708091011121314
keepalive = 1

[cccam]
port = 15000
nodeid = 4D16AEB410FB1504
version = 2.3.0
reshare = 1
ignorereshare = 1

[webif]
httpport = 16002
serverip = 192.168.178.50
httpuser = oscam
httppwd = oscam
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

Übernimm das mal so. Sieht so aus als wäre der Port doppelt belegt. Hast du noch andere Cam's nebenbei laufen?(konsole "ps ax" eingeben, ggf. mit kill SID Prozess beenden) Dein Camd3Emu im Oscam.server ist auch recht sinnfrei, wenn das Cam mit auf dem ThinClient läuft ist die IP 127.0.0.1 und der Port 22000 ist schon für die V14 CAID des Newcamd Protokolls reserviert.


MfG
 
Zuletzt bearbeitet:
AW: CS...FritzBox? ThinClient? Mit oder ohne IPC? Newbie :-(

So, hab ich übernommen. Im cccam.cfg der Gigablue steht diese c Line -->C: 192.168.178.50 15000 test test1

Es läuft die CCcam 2.3.0

Auf dem thin Client läuft nur die Oscam.1.2_unstable. Server boote ich jetzt nochmal neu.

Und dann sind alle meine Gehirnwindungen verdreht

oscam.log
------------------------------------------------------------------------------
>> OSCam << cardserver started at Sun Sep 29 03:20:06 2013
-------------------------------------------------------------------------------
2013/09/29 03:20:06 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8938 (i486-linux-gnu)
2013/09/29 03:20:06 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 2240
2013/09/29 03:20:06 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2013/09/29 03:20:06 0 s signal handling initialized
2013/09/29 03:20:06 0 s newcamd: initialized (fd=5, port=22000)
2013/09/29 03:20:06 0 s -> CAID: 098C PROVID: 000000
2013/09/29 03:20:06 0 s cccam: initialized (fd=6, port=15000)
2013/09/29 03:20:06 0 s camd3emu [smartreader] creating thread for device 192.168.178.50
2013/09/29 03:20:06 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/09/29 03:20:06 0 s waiting for local card init
2013/09/29 03:20:06 B7200798 r camd3emu [smartreader] Wrong device format (192.168.178.50), it should be Device=bus:dev
2013/09/29 03:20:06 B7200798 r camd3emu [smartreader] Cannot open device: 192.168.178.50
2013/09/29 03:20:06 9FD94E0 h webif: decompressed 54245 bytes back into 154648 bytes
2013/09/29 03:20:06 9FD94E0 h HTTP Server running. ip=192.168.178.50 port=16002
2013/09/29 03:21:07 B7200798 r camd3emu [smartreader] Wrong device format (192.168.178.50), it should be Device=bus:dev
2013/09/29 03:21:07 B7200798 r camd3emu [smartreader] Cannot open device: 192.168.178.50
2013/09/29 03:22:07 B7200798 r camd3emu [smartreader] Wrong device format (192.168.178.50), it should be Device=bus:dev
2013/09/29 03:22:07 B7200798 r camd3emu [smartreader] Cannot open device: 192.168.178.50
2013/09/29 03:23:07 B7200798 r camd3emu [smartreader] Wrong device format (192.168.178.50), it should be Device=bus:dev
2013/09/29 03:23:07 B7200798 r camd3emu [smartreader] Cannot open device: 192.168.178.50
2013/09/29 03:24:07 B7200798 r camd3emu [smartreader] Wrong device format (192.168.178.50), it should be Device=bus:dev
2013/09/29 03:24:07 B7200798 r camd3emu [smartreader] Cannot open device: 192.168.178.50
 
Zuletzt bearbeitet:
AW: CS...FritzBox? ThinClient? Mit oder ohne IPC? Newbie :-(

Hi,Versuche es mal so. Ausge xxx te bitte Anpassen.
Sehe du hast ne GigaBlue, Habe auf der giga cccam 2.3.0 gehabt gab nur freezer alle 2-3 minuten.
wen das kommt empfehle ich dir auf oscam umzusteigen, versuche es aber erstmal mit cccam.

Oscam.Config
[global]
disablelog = 0
loghistorysize = 4096
logfile = /var/log/ipc/OScam.log
cwlogdir =
clientmaxidle = 120
unlockparental = 1
nice = -1
maxlogsize = 15
waitforcards_extra_delay = 1500
preferlocalcards = 1
dropdups = 1
block_same_name = 1
failbantime = 120
failbancount = 2
suppresscmd08 = 1
lb_mode = 0




[monitor]


appendchaninfo = 1




[cccam]
port = xxxx
version = 2.3.0
stealth = 1
ignorereshare = 0
reshare_mode = 0
keepconnected = 1
minimizecards = 0
reshare = -1


[webif]
httpport = xxxx
httpuser = xxxx
httppwd = xxxxxx
httpcss =
httpjscript =
httpscript =
httphelplang = de
httpcert =
http_prepend_embedded_css = 0
httprefresh = 15
httphideidleclients = 1
httphidetype =
httpshowpicons = 1
httpallowed = 127.0.0.1,192.168.255.255-192.168.225.255
httpreadonly = 0
httpsavefullcfg = 1
httpforcesslv3 = 0
hideclient_to = 30

Oscam.Server

[reader]
label = V14
protocol = mouse
device = /dev/ttyUSB0
cacheex_maxhop = 1
caid = 098C
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
cccreshare = 0
boxid = 12345678
 
Du musst dich einloggen oder registrieren, um hier zu antworten.

Ähnliche Themen

R
Neuling benötigt Hilfe: CS mit G02-Karte (HD+ und Sky) und FritzBox/ThinClient
Antworten
7
Aufrufe
2K
Alex
Menü
Anmelden
Registrieren
Für die Nutzung dieser Website sind Cookies erforderlich. Du musst diese akzeptieren, um die Website weiter nutzen zu können. Erfahre mehr…