taromisaki
Newbie
- Registriert
- 7. Dezember 2009
- Beiträge
- 3
- Reaktionspunkte
- 0
- Punkte
- 1
Salve amici è una settimana che sto sbattendo per far girare OScam pura DVBAPI sul mio cardreader dell'800HD originale.
Ho letto tutte le configurazioni possibili e mi sono accorto che con la versione 8557 di dax e con DOscam V0.19 la carta funziona mentre con la nuova 9227 oppure con 9105 by dax non funziona. Potreste controllarmi la configurazione? Grazie.
Oscam.conf
Oscam.server
Oscam.user
Oscam.dvbapi
Ecco cosa risulta:
Post modificato da meister85
Ho letto tutte le configurazioni possibili e mi sono accorto che con la versione 8557 di dax e con DOscam V0.19 la carta funziona mentre con la nuova 9227 oppure con 9105 by dax non funziona. Potreste controllarmi la configurazione? Grazie.
Oscam.conf
[global]
Nice = -1
WaitForCards = 1
ClientTimeout = 5
LogFile = stdout
#LogFile = /var/log/oscam.log
Maxlogsize = 50k
[newcamd]
key = 0102030405060708091011121314
port = 11000@09CD:000000
[webif]
httpallowed = 192.168.1.1-192.168.4.254
httpport = 8888
[cccam]
port = 12000
reshare = 1
ignorereshare = 0
version = 2.1.3
updateinterval = 240
minimizecards = 0
keepconnected = 1
stealth = 1
reshare_mode = 0
ignorereshare = 1
[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = pinkopallino
pmt_mode = 0
Nice = -1
WaitForCards = 1
ClientTimeout = 5
LogFile = stdout
#LogFile = /var/log/oscam.log
Maxlogsize = 50k
[newcamd]
key = 0102030405060708091011121314
port = 11000@09CD:000000
[webif]
httpallowed = 192.168.1.1-192.168.4.254
httpport = 8888
[cccam]
port = 12000
reshare = 1
ignorereshare = 0
version = 2.1.3
updateinterval = 240
minimizecards = 0
keepconnected = 1
stealth = 1
reshare_mode = 0
ignorereshare = 1
[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = pinkopallino
pmt_mode = 0
Oscam.server
[reader]
label = skyitalia
protocol = internal
device = /dev/sci0
caid = 09CD
boxid = xxxxxxxx
detect = cd
mhz = 2700
cardmhz = -1
ident = 09CD:000000
group = 1,2
emmcache = 1,3,2
label = skyitalia
protocol = internal
device = /dev/sci0
caid = 09CD
boxid = xxxxxxxx
detect = cd
mhz = 2700
cardmhz = -1
ident = 09CD:000000
group = 1,2
emmcache = 1,3,2
Oscam.user
[account]user = pinkopallino
pwd =
group = 1
caid = 09CD
ident = 09CD:000000
AU = 1
suppresscmd08 = 1
pwd =
group = 1
caid = 09CD
ident = 09CD:000000
AU = 1
suppresscmd08 = 1
Oscam.dvbapi
P: 09CD
I: 093b
I: 0919
I: 093b
I: 0919
Ecco cosa risulta:
10/01/2014 17:13:29 56EAxx r skyitalia [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=2700, cardmhz=-1)
10/01/2014 17:13:30 56EAxx r skyitalia [internal] card detected
10/01/2014 17:13:32 56EAxx r skyitalia [internal] ATR: 3F xx 15 xx xx xx xx xx xx xx xx xx xx xx 50 D0 80 00 49 54 03
10/01/2014 17:13:32 56EAxx r skyitalia [internal] Init card protocol T0, FI=1, F=372, D=16, N=2
10/01/2014 17:13:32 56EAxx r skyitalia [internal] Calculated work ETU is 0.86 us reader mhz = 2700
10/01/2014 17:13:32 56EAxx r skyitalia [internal] ATR Fsmax is 5 MHz, clocking card to 27.00 (specified in reader->mhz)
10/01/2014 17:13:33 56EAxx r skyitalia [internal] card system not supported
10/01/2014 17:13:33 56EAxx r skyitalia [internal] Normal mode failed, reverting to Deprecated Mode
10/01/2014 17:13:34 56EAxx r skyitalia [internal] ATR: 3F FD 13 25 02 50 80 0F 54 B0 04 69 FF 4A 50 D0 80 00 49 54 03
10/01/2014 17:13:34 56EAxx r skyitalia [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
10/01/2014 17:13:34 56EAxx r skyitalia [internal] Calculated work ETU is 13.78 us reader mhz = 2700
10/01/2014 17:13:34 56EAxx r skyitalia [internal] ATR Fsmax is 5 MHz, clocking card to 27.00 (specified in reader->mhz)
10/01/2014 17:13:36 56EAxx r skyitalia [internal] card system not supported
10/01/2014 17:13:36 56EAxx r skyitalia [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
10/01/2014 17:13:36 56EAxx r skyitalia [internal] card initializing error
10/01/2014 17:13:30 56EAxx r skyitalia [internal] card detected
10/01/2014 17:13:32 56EAxx r skyitalia [internal] ATR: 3F xx 15 xx xx xx xx xx xx xx xx xx xx xx 50 D0 80 00 49 54 03
10/01/2014 17:13:32 56EAxx r skyitalia [internal] Init card protocol T0, FI=1, F=372, D=16, N=2
10/01/2014 17:13:32 56EAxx r skyitalia [internal] Calculated work ETU is 0.86 us reader mhz = 2700
10/01/2014 17:13:32 56EAxx r skyitalia [internal] ATR Fsmax is 5 MHz, clocking card to 27.00 (specified in reader->mhz)
10/01/2014 17:13:33 56EAxx r skyitalia [internal] card system not supported
10/01/2014 17:13:33 56EAxx r skyitalia [internal] Normal mode failed, reverting to Deprecated Mode
10/01/2014 17:13:34 56EAxx r skyitalia [internal] ATR: 3F FD 13 25 02 50 80 0F 54 B0 04 69 FF 4A 50 D0 80 00 49 54 03
10/01/2014 17:13:34 56EAxx r skyitalia [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
10/01/2014 17:13:34 56EAxx r skyitalia [internal] Calculated work ETU is 13.78 us reader mhz = 2700
10/01/2014 17:13:34 56EAxx r skyitalia [internal] ATR Fsmax is 5 MHz, clocking card to 27.00 (specified in reader->mhz)
10/01/2014 17:13:36 56EAxx r skyitalia [internal] card system not supported
10/01/2014 17:13:36 56EAxx r skyitalia [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
10/01/2014 17:13:36 56EAxx r skyitalia [internal] card initializing error
Post modificato da meister85
Zuletzt bearbeitet von einem Moderator: