Hallo,
hier noch mal die Fehlermeldung:
Das ganze habe ich mit STB Management V4.0 gemacht. Schein das einzige Tool zu sein mit dem ich die Box ansprechen kann.
FW_EYS_E800SF_250706.cus
Sent Data: [91/93] size=0x2000
Sent Data: [92/93] size=0x2000
END Sent Data: [93/93] size=0x1732
Erasing Flash, please wait... OK
Programming Flash, please wait... Completed.
<<Update Over!>>
0x1E59-000B972E
!Wrong Start Address[0xE124A77C]!-0x003C
=>Starting Application
Hi, I same problem! I write FW_EYS_E800SF_250706.cus and I have received same report:
= SmartMPEG Boot loader V4.0 ==
================================
0x0001-000B972E
!Wrong Start Address[0xE124A77C]!-0x003C
=>Starting Application
Can you send me please G04.cus? Maby it is OK, you write its OK.
Thanks for all.
My email is :
hypnos@seznam.cz
Thanks