- Registriert
- 4. März 2009
- Beiträge
- 10.248
- Reaktionspunkte
- 8.612
- Punkte
- 1.073
Ich habe mein Fritz 7270 gefreezt, nen Smargo drann und wollte per CCCam auf mein Kathie sharen, intern!
Leider bewege ich seit Stunden die beiden zu keiner Unterhaltung:
Wo liegt mein Problem?
Meine Kathie 910 hat folgende Config:
MGCamd 1.35
mg_cfg:
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }
# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 02 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 32 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30
# network ecm timeout in seconds
K: { 05 }
# newcamd dead routes connect retry, sec
Q: { 600 }
# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 02 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 00 } 172.16.1.1 28007 /tmp/mgcamd.log
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E
time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }
# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 08 }
# map all 180x nagra caids to 1801
# default is 01
F: { 00 }
cccamd.list:
C: 192.168.178.1 12000 collin leonie
Die Fritz hat folgende CCcam.cfg:
########################## Clienten ######
F: collin leonie 2 0 1 { 0:0:1 } { } { } 192.168.178.210
############################ Server #######
C: xxxxx.dyndns.org 12000 collin leonie
SERVER LISTEN PORT : 12000
SOFTKEY FILE : /var/media/ftp/uStor01/cs/cccam/SoftCam.Key
AUTOROLL FILE : /var/media/ftp/uStor01/cs/cccam/AutoRoll.Key
STATIC CW FILE : /var/media/ftp/uStor01/cs/cccam/constant.cw
CAID PRIO FILE : /var/media/ftp/uStor01/cs/cccam/CCcam.prio
PROVIDERINFO FILE : /var/media/ftp/uStor01/cs/cccam/CCcam.providers
CHANNELINFO FILE : /var/media/ftp/uStor01/cs/cccam/CCcam.channelinfo
SERIAL READER: /dev/ttyUSB0 smartreader+
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 6000000
DISABLE EMM : no
EXTRA EMM LEVEL : yes
SHOW TIMING : yes
DEBUG : yes
WEBINFO USERNAME : cccam
WEBINFO PASSWORD : cccam
ALLOW TELNETINFO: yes
TELNETINFO LISTEN PORT : 16000
TELNETINFO USERNAME : cccam
TELNETINFO PASSWORD : cccam
WEBINFO LISTEN PORT : 16001
MINIMUM DOWNHOPS: 1
Im CCCam info entitelments sehe ich folgendes:
card reader /dev/ttyUSB0
handled 0(0) ecms and 0(0) emms
Caid 1702 Betacrypt ACS 900 GER
Cardserial 0xxxxxxxx (7xxxxxx)
Chid 0107 - date 0xeef valid 0x2
Chid 0108 - date 0xeef valid 0x2
Chid 7D2B - date 0xeef valid 0x2
Chid 7D24 - date 0xeef valid 0x2
Chid 7D23 - date 0x122d valid 0x43
Chid 61BD - date 0xeef valid 0x2
Chid 04BA - date 0xeef valid 0x2
Chid 04C4 - date 0xeef valid 0x2
Chid 7D2C - date 0xeef valid 0x2
Chid 7D2D - date 0xeef valid 0x2
Also wird die karte erkannt, oder?
Bei Active Clients steht das:
Connected clients: 1
0 ACTIVE CLIENTS IN LAST 20 SECONDS
+---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+
| Username| Host | Connected | Idle time | ECM | EMM | Version| Last used share | Ecm time |
+---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+
+---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+
+---------+---------------------------------------+
| Username| Shareinfo |
+---------+---------------------------------------+
| collin| |
Bei Clients steht das:
Connected clients: 1
+---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+
| Username| Host | Connected | Idle time | ECM | EMM | Version| Last used share | Ecm time |
+---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+
|collin |192.168.178.210|00d 00:12:20|00d 00:12:20|0 (0)|0 (0)|2.0.11 | | |
+---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+
+---------+---------------------------------------+
| Username| Shareinfo |
+---------+---------------------------------------+
| collin| |
+---------+---------------------------------------+
+---------+---------------------------------------+
Ich sehe kein Bild auf meiner Kathie!
Wer hat einen Tip wo der Hase im Pfeffer liegt?
Danke und Grüsse
szonic (ich mache jetzt erstmal heia)
Leider bewege ich seit Stunden die beiden zu keiner Unterhaltung:
Wo liegt mein Problem?
Meine Kathie 910 hat folgende Config:
MGCamd 1.35
mg_cfg:
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }
# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 02 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 32 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30
# network ecm timeout in seconds
K: { 05 }
# newcamd dead routes connect retry, sec
Q: { 600 }
# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 02 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 00 } 172.16.1.1 28007 /tmp/mgcamd.log
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E
time# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }
# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 08 }
# map all 180x nagra caids to 1801
# default is 01
F: { 00 }
cccamd.list:
C: 192.168.178.1 12000 collin leonie
Die Fritz hat folgende CCcam.cfg:
########################## Clienten ######
F: collin leonie 2 0 1 { 0:0:1 } { } { } 192.168.178.210
############################ Server #######
C: xxxxx.dyndns.org 12000 collin leonie
SERVER LISTEN PORT : 12000
SOFTKEY FILE : /var/media/ftp/uStor01/cs/cccam/SoftCam.Key
AUTOROLL FILE : /var/media/ftp/uStor01/cs/cccam/AutoRoll.Key
STATIC CW FILE : /var/media/ftp/uStor01/cs/cccam/constant.cw
CAID PRIO FILE : /var/media/ftp/uStor01/cs/cccam/CCcam.prio
PROVIDERINFO FILE : /var/media/ftp/uStor01/cs/cccam/CCcam.providers
CHANNELINFO FILE : /var/media/ftp/uStor01/cs/cccam/CCcam.channelinfo
SERIAL READER: /dev/ttyUSB0 smartreader+
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 6000000
DISABLE EMM : no
EXTRA EMM LEVEL : yes
SHOW TIMING : yes
DEBUG : yes
WEBINFO USERNAME : cccam
WEBINFO PASSWORD : cccam
ALLOW TELNETINFO: yes
TELNETINFO LISTEN PORT : 16000
TELNETINFO USERNAME : cccam
TELNETINFO PASSWORD : cccam
WEBINFO LISTEN PORT : 16001
MINIMUM DOWNHOPS: 1
Im CCCam info entitelments sehe ich folgendes:
card reader /dev/ttyUSB0
handled 0(0) ecms and 0(0) emms
Caid 1702 Betacrypt ACS 900 GER
Cardserial 0xxxxxxxx (7xxxxxx)
Chid 0107 - date 0xeef valid 0x2
Chid 0108 - date 0xeef valid 0x2
Chid 7D2B - date 0xeef valid 0x2
Chid 7D24 - date 0xeef valid 0x2
Chid 7D23 - date 0x122d valid 0x43
Chid 61BD - date 0xeef valid 0x2
Chid 04BA - date 0xeef valid 0x2
Chid 04C4 - date 0xeef valid 0x2
Chid 7D2C - date 0xeef valid 0x2
Chid 7D2D - date 0xeef valid 0x2
Also wird die karte erkannt, oder?
Bei Active Clients steht das:
Connected clients: 1
0 ACTIVE CLIENTS IN LAST 20 SECONDS
+---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+
| Username| Host | Connected | Idle time | ECM | EMM | Version| Last used share | Ecm time |
+---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+
+---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+
+---------+---------------------------------------+
| Username| Shareinfo |
+---------+---------------------------------------+
| collin| |
Bei Clients steht das:
Connected clients: 1
+---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+
| Username| Host | Connected | Idle time | ECM | EMM | Version| Last used share | Ecm time |
+---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+
|collin |192.168.178.210|00d 00:12:20|00d 00:12:20|0 (0)|0 (0)|2.0.11 | | |
+---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+
+---------+---------------------------------------+
| Username| Shareinfo |
+---------+---------------------------------------+
| collin| |
+---------+---------------------------------------+
+---------+---------------------------------------+
Ich sehe kein Bild auf meiner Kathie!
Wer hat einen Tip wo der Hase im Pfeffer liegt?
Danke und Grüsse
szonic (ich mache jetzt erstmal heia)
