Codierung BMW BMW F30 Codierung

Change FA (VO) to Remove 6NH from VO & Add 6NS to VO

VO Code HU_ENTRY & CMB_MEDIA (or just HU-NBT)

Read FA(VO)àActivate FA(VO)àRead SVTàRight-Click ECU & Select Code



Now Proceed to code HU_ENTRY & CMB_MEDIA (or just HU_NBT) Modules … or re-code if coding was already present

Change FA (VO) to Remove 205 from VO & Add 2TB to VO

VO Code EGS, ICM, & KOMBI

Read FA(VO)àActivate FA(VO)àRead SVTàRight-Click ECU & Select Code

VO Code ICM

Right-Click ECU & Select Code

VO Code KOMBI

Right-Click ECU & Select Code



Now Proceed to code any Module above … or re-code if coding was already present

Disable Welcome 3 Gongs:

3000 à Initialwarnung_GWF_IW = nicht_aktiv



SeatBelt Reminder Lights OFF: set all to nicht_aktiv – werte=00

3000àGurtzustandsanzeige_Beifahrer_GFW_GZA_BF

3000àGurtzustandsanzeige_Fahrer_GFW_GZA_FA



Turn Off Seat-Belt Reminder Chimes:

3000 à SeatBeltReminder_SBR_Fahrer = nicht_aktiv

3000 à SeatBeltReminder_SBR_Beifahrer = nicht_aktiv

Transfer Telephone Ringtone to car:

3001 à INBAND_RINGING = aktiv 01

Start Car by pushing button (hold brake not needed)

New Procedures is as mentioned:

• press once for iDrive and fuel pump
• press a second time and hold to crank engine

3020àTCM_STARTLOCK_BRAKE set to: nicht_aktiv

3020àTCM_STARTLOCK_CLUTCH set to: nicht_aktiv

3020àTCM_STARTLOCK_DRIVINGREADINESS set to: nicht_aktiv

Increase Angel Eyes Brightness to 100%

Xxxx à MAPPING_STANDL_V_L_PWM_LEVEL_1 = 100%

Xxxx à MAPPING_STANDL_V_R_PWM_LEVEL_1 = 100%

Xxxx à MAPPING_PARKL_V_L_PWM_1_LEFT = 100%

Xxxx à MAPPING_PARKL_V_L_PWM_2_RIGHT = 100%

Close windows, sunroof & mirror from key fob:

3053 à KOMFORTSCHLIESSUNG_FB = aktiv 00 (Comfort Access ONLY)

3053 à KOMFORT_SCHLIESSEN à WERTE = 00 (Mirror Fold Delay = 0 sec delay)

3110 à ASP_BEIKLAPPEN = aktiv (werte=01)

3110 à ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN = (werte=01)

3110 à ASP_AUSKLAPPEN_NACH_KOMFORTSCHLIESSEN = (werte=01)



Change Mirror Un-Fold Automatically at XX Speed (Binary value in Werte):

3110 à ASP_GESCHWINDIGKEIT_AUTO_AUSKLAPPEN à werte=14 (12Mph)

Turn off MMI when door is opened:

3020 à TCM_LOGIC_R_OFF_DOOR = aktiv 01

Auto Start/Stop Default OFF:

3023 à TCM_MSA_DEFAULT_OFF = aktiv 01
Auto Start/Stop Remember Last Setting:

3023 à TCM_MSA_MEMORY = aktiv 01

Unlock Door on Engine OFF (1 pull):

3040 à CLM_UNLOCK_KL15OFF_AFTER_PIA_AUTO_LOCK = aktiv 01

Turn off window roll-up door interrupt:

3050 à FH_TUERAUF_STOP_MAUT

Change Triple-Blink Count to another Value:

3060 à BLINKZYKLEN_ANZAHL_TIPP – Werte = # blinks-1 (4 blinks = werte=3)
Turn on Brake Force Flashing with Hard Braking:

3060 à ESS_AKTIVIERBARER_AUSGANG = bremsclicht blinkend
Turn off Amber Side Markers next to Headlight:

3063 à MAPPING_SIDEMARKER_L_OUTPUT = OFF

3063 à MAPPING_SIDEMARKER_R_OUTPUT = OFF



Tilt Passenger Mirror farther down when in reverse

3110àASP_BORDSTEINAUTOMATIK_DELTA set to: werte=4B



Ambiance Lighting controlled independent from Dimmer Switch

3070 à AMBIENTE_NACHFUEHRUNG set to: nicht_aktiv



Enable Illumination of Exterior Door Handle LEDs when in Reverse

3070àOVT_BEI_REUCKFAHRLICHT set to: aktiv



Turn on Fog Lights with Welcome Lights:

3063 à MAPPING_NEBELSCHW_L_PART_OF_WL = hard on

3063 à MAPPING_NEBELSCHW_R_PART_OF_WL = hard on



Activate Rear Fog Lights: (In conjunction with REM Module coding)

3060à NSL_Verbaut = Verbaut



Disable Headlight Washers

3080 à WW_SCHEINWERFERREININUNG set to: nicht_aktiv



Auto Light Sensitivity Increase

3130àRLS_DEF_FLC_SCHWELLWERT_SATZ set to: option below
3130àRLS_FLC_SCHWELLWERT_SATZ set to: option below
Options:
normal = mornal
empfindlich = sensitive
sehr_empfindlich = very sensitive
unempfindlich = insensitive



Code fog lights for LED-Bulb replacing halogen bulbs:

3061àNSW_L_KALTUEBERWACHUNG set to: nicht_aktiv

3061àNSW_L_WARMUEBERWACHUNG set to: nicht_aktiv

3061àNSW_L_KURZSCHLUSS set to: nicht_aktiv

3061àNSW_L_IS_LED set to: aktiv

3061àNSW_R_KALTUEBERWACHUNG set to: nicht_aktiv

3061àNSW_R_WARMUEBERWACHUNG set to: nicht_aktiv

3061àNSW_R_KURZSCHLUSS set to: nicht_aktiv

3061àNSW_R_IS_LED set to: aktiv



Code front turn signals for LED-Bulb replacing halogen bulbs:

3061àFRA_V_L_KALTUEBERWACHUNG set to: nicht_aktiv

3061àFRA_V_L_WARMUEBERWACHUNG set to: nicht_aktiv

3061àFRA_V_L_IS_LED set to: aktiv

3061àFRA_V_R_KALTUEBERWACHUNG set to: nicht_aktiv

3061àFRA_V_R_WARMUEBERWACHUNG set to: nicht_aktiv

3061àFRA_V_R_IS_LED set to: aktiv

Set cell phone ringer as primary

3003àINBAND_RINGING set to: aktiv – werte=01



Disable Auto-Locking of Doors once begin driving

3000àDOOR_LOCK_AFTER_DRIVING_AWAY set to: nicht_aktiv



Enable ///M LapTmer

3000 à M_LAPTIMER set to: aktiv



DVD-in-Motion activated:

3000 à SPEEDLOCK_X_KMH_MAX werte = FF

3000 à SPEEDLOCK_X_KMH_MIN werte = FF

3000 à VIDEO_HANDBRAKE set to: nicht_aktiv

3000 à VIDEO_FRONT_LOCKED set to: nicht_aktiv

3000 à VIDEO_SPEEDLOCK_CONDITION set to: none=00



Allow unit change for Sport Display:

3000 à EFF_DYN_SPORT_UNIT = aktiv 01



Enable Sport Displays (Power/Torque) & Unit Changing (kW/nM)

3000 à EFF_DYN_SPORT_CID set to: aktiv

3000 à EFF_DYN_SPORT_UNIT set to: aktiv



Enable Turn Signals in HUD

3001àHUD_TURNSIGNAL set to: aktiv



Change Navi Voice to British English

3000àLANGUAGE_ENGLISH_UK set to: master

3000àLANGUAGE_ENGLISH_US set to: nicht_aktiv



Navi Trip-Import

3000àNAVI_TRIP_IMPORT set to: aktiv



Remove Legal Disclaimers:

3001 à LEGAL_DISCLAIMER_TIME = kein_ld

3001 à MACRO_CAM_LEGALDISCLAIMER = kein_ld



Display Tire Pressure & Temperaure in Vehicle Info:

3001 à RDC_SAFETY = aktiv 01



Add Weatherband Radio to sources:

3002 à RADIO_WEATHERBAND = aktiv 01



Enable Video Files from USB

3000 àENT_CODEC_XVID set to: aktiv

3000 àENT_CODEC_XVCD set to: aktiv

3000 àAPI_USB_VIDEO set to: both



Enable the function of saving video files to NBT Hard Drive for play later

3000 à ENT_MC_VIDEO_SUPPORT set to: aktiv



Disable Office Function Speed Lock-Out

3000à OFFICE_MESSAGES_SPEEDLOCK_CONDITION set to: nicht_aktiv



Enable Full Text Lines in Office While Driving

3003 à PIM_DRIVING_TEXT_LENGTH set to: whole text_07



Disable Audible Chirp/Beep When Locking Car

3000 à ACOUSTICAL_LOCK_CONFIRM set to: nicht_aktiv



Enable Speeach Input for E-Mail or SMS

3003 à SPEECH_2_TEXT set to: aktiv



Enable Time-Stamp Display for Call Log

3003 à TIMESTAMP_DISPLAY set to: aktiv



Add GPS Current Location to Navi Menu Items

3000àNAVI_POSITION_MENU set to: aktiv



Enable IPCE Web Server @ 172.16.222.1

3000àIPCE_WEBSERVER set to: aktiv



Enable WiFi Hot-Spot

(Need to install a DLNA/UPnP media sharing server on your laptop or phone to be able to use this)

3000àENT_MC_WLAN_STREAM_DMP_COVERART set to: aktiv

3000àENT_MC_WLAN_STREAM_DMP_VIDEO set to: aktiv

3000àENT_MC_WLAN_STREAM_DMP set to: aktiv

3003àWLAN_STATUS set to: aktiv

3003àWLAN_MODUS set to: ap

3003àWLAN_SIGNAL_STRENGTH set to: outdoor

3003àWLAN_CHANNEL set to: channel_1 -14



Enable Developer Menu

3000 à ENTWICKLER_MENUE set to: aktiv 01

Always start in Eco Pro

3000 à IcmKod_B_InitEco set to: verbaut

A/C System Remembers Last Setting

3003àMEMORY_OFF set to aktiv-werte=01



Always Remember Air ReCirculating

3003àMEMORY_UMLUFT set to: aktiv

Add Digital Speed to SpeedoLCD Display via BC button:

3000 à BC_DIGITAL_V = aktiv 01



Change Startup Screen in SpeedoLCD to ///M Performance:

3000 à BMW_LOGO = mpm



Set Clock via GPS:

3000 à GPS_UHR = aktiv 01



Disable HUD Startup Animation

3008àHUD_STARTUP_TIME Werte=00



REM_01:



Turn On Tail Lights with DRLs:

3062 à MAPPING_TAGFAHRL_H_L_OUTPUT = sl_l

3062 à MAPPING_TAGFAHRL_H_R_OUTPUT = sl_r

3062 à MAPPING_TAGAHRL_H2_L_OUTPUT = sl_2_l

3062 à MAPPING_TAGAHRL_H2_R_OUTPUT = sl_2_r



Activate Rear Fog Lights feature for lighting switch:

3063à Mapping_Nebelschlussl_L_output = nsl_l

3063à Mapping_Nebelschlussl_L_Function = nebelschlusslicht

3063à Mapping_Nebelschlussl_R_output = nsl_l

3063à Mapping_Nebelschlussl_R_Function = nebelschlusslicht



Enable Rear-View Camera at all Speeds

3009àD_SCHWELLE_2 Werte = FF

3009àV_SCHWELLE_2 Werte = FF



Code rear turn signals for LED-Bulb replacing halogen bulbs:

3061àFRA_H_L_KALTUEBERWACHUNG set to: nicht_aktiv

3061àFRA_H_L_WARMUEBERWACHUNG set to: nicht_aktiv

3061àFRA_H_L_IS_LED set to: aktiv

3061àFRA_H_R_KALTUEBERWACHUNG set to: nicht_aktiv

3061àFRA_H_R_WARMUEBERWACHUNG set to: nicht_aktiv

3061àFRA_H_R_IS_LED set to: aktiv



Code rear brake lights for LED-Bulb replacing halogen bulbs:

3061àBR_L_KALTUEBERWACHUNG set to: nicht_aktiv

3061àBR _L_WARMUEBERWACHUNG set to: nicht_aktiv

3061àBR_L_IS_LED set to: aktiv

3061àBR_R_KALTUEBERWACHUNG set to: nicht_aktiv

3061àBR_R_WARMUEBERWACHUNG set to: nicht_aktiv

3061àBR_R_IS_LED set to: aktiv

Activate Side Cameras at ANY Speed:

3000 à SV_Activate_Speed_Limit à werte = FF

3000 à SV_Deactivate_Speed_Limit à werte = FF