Hi Leute
Ich habe eine S02 Karte am laufen mit Newcs 1.62 und CCcam 2.0.9 in einer Dbox2 Philips mit MC 3.0 und Zebradem Image 3.0.
und gleichzeitig bekomm ich eine andere Karte von einer Dreambox (Ich als Client).
Folgendes Problem:Bei mir läuft alles einwandfrei doch bei meinem Schwager der von mir shared bleibt das bild alle 20 sec. hängen und läuft wieder nach 5-10 sec.ausser wenn er den gleichen Sender wie ich schaut dann nicht.
und er bekommt auch die Karte die ich von meinem Bruder geshared bekomme von mir geshared und da läuft alles super nur bei der Karte die bei mir im MC steckt friert das Bild bei ihm ein.
Daher vermute ich mal das es am Newcs liegt die Karte läuft bei mir mit 6.00 Mhz im MC ohne frequenzautomatik.
meine newcs config:
BODY{font:x-small 'Verdana';margin-right:1.5em} .c{cursor:hand} .b{color:red;font-family:'Courier New';font-weight:bold;text-decoration:none} .e{margin-left:1em;text-indent:-1em;margin-right:1em} .k{margin-left:1em;text-indent:-1em;margin-right:1em} .t{color:#990000} .xt{color:#990099} .ns{color:red} .dt{color:green} .m{color:blue} .tx{font-weight:bold} .db{text-indent:0px;margin-left:1em;margin-top:0px;margin-bottom:0px;padding-left:.3em;border-left:1px solid #CCCCCC;font:small Courier} .di{font:small Courier} .d{color:blue} .pi{color:blue} .cb{text-indent:0px;margin-left:1em;margin-top:0px;margin-bottom:0px;padding-left:.3em;font:small Courier;color:#888888} .ci{font:small Courier;color:#888888} PRE{margin:0px;display:inline} <?xml version="1.0" ?>
- <!-- For setup-issues, look in readme.txt! If there are other troubles, try different forums or irc channels around ) The configfile are NOT case-sensitive, and shouldnt care about dos/unix cr/lf. ** This is the example file for Dbox. -->
<name>Multicam</name>
<type>dbox</type>
<mhz>600</mhz>
<node>/dev/tts/1</node>
<parity>odd</parity>
<reset>hard</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
- <!-- <boxkey>0000000000</boxkey> -->
- <!-- <rsa>0000000000</rsa> -->
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000 0 00000000000000000000000000000000000000000000000000000000000000000000000000000000 0 000000000000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000 0 00000000000000000000000000000000000000000000000000000000000000000000000000000000 0 000000000000000000</ipk>
<ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000 0 00000000000000000000000000000000000000000000000000000000000000000000000000000000 0 000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>25030</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
</readers>
<enabled>No</enabled>
<port>16000</port>
<hostname>localhost????</hostname>:2:
</allow>
</radegastserver>
<emm>20</emm>
<ecm>20</ecm>
</cache>
<password>webinterfacepasswd</password>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<name>Muster</name>
<password>Muster1</password>
<hostname>welche IP kommt hier rein</hostname>:2:
<port>12000</port>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
<rate>2</rate>
</user>
</newcamdserver>
</newCSconfig>
und welche Ip kommt den in localhost???
und bei der CCcam.cfg der clienten steht
F: user3 user3
F: user3 user3
ich würde mich sehr über ein bischen hilfe freuen danke euch schon mal:1:
das kommt über telnet
/var # newcs -dv
This is NewCS 1.62 - the New CardServer by the Butter-team..
Compiled on Aug 27 2008 at 16:49:31
Reading Config file from /var/tuxbox/config/newcs.xml
TCP-log password is enabled, set to: webinterfacepasswd
TCP-log set to simple mode
level: normal
type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 15:25:01 ] [ Box detect ] Box type 4 (Dbox2)
[ 15:25:01 ] [ Config ] Option <blockc0> for device 0 (Multicam) not present, de
faulting to NO
[ 15:25:01 ] [ Config ] Value in <ipk> for device 0 (Multicam) is INVALID, skipp
ing...
[ 15:25:01 ] [ Config ] Value in <ucpk> for device 0 (Multicam) is INVALID, skip
ping...
[ 15:25:01 ] [ Config ] Pincode for device 0 (Multicam): 0000
[ 15:25:01 ] [ Config ] /dev/tts/1 ECM priority: round
[ 15:25:01 ] [ EMM Cache ] Initialising dynamic Cache
[ 15:25:01 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 1745
[ 15:25:01 ] [ Loader ] Starting Telnet on port 1001
[ 15:25:01 ] bind: error! 98: Address already in use
[ 15:25:01 ] [ Loader ] Reader type 4 on node /dev/tts/1
[ 15:25:01 ] [ Dbox ] Opening device /dev/tts/1
[ 15:25:02 ] [ Loader ] Unknown card
[ 15:25:02 ] [ Loader ] Trying Irdeto (T=14)
[ 15:25:02 ] [ Loader ] Reader type 4 on node /dev/tts/1
[ 15:25:02 ] [ Dbox ] Opening device /dev/tts/1
[ 15:25:04 ] [ ATR ] T=14 1etu=104.17us Guardtime:17etu WWT:9600etu
[ 15:25:04 ] [ ATR ] Historical bytes: I R D E T O A C S [03] [84] U [FF] [80]
[ 15:25:04 ] [ Loader ] Init Irdeto card
[ 15:25:05 ] [ Keyman ] Adding key 000000007a0f7f type 0 on Provider 000000 for
caid 1702 ID=0
[ 15:25:05 ] [ Keyman ] Adding key 00000000ffffff type 1 on Provider 000000 for
caid 1702 ID=0
[ 15:25:05 ] [ Keyman ] Skipping duplicate irdeto
[ 15:25:05 ] [ Keyman ] Adding key 00000000ffffff type 1 on Provider 000001 for
caid 1702 ID=1
[ 15:25:06 ] [ Keyman ] Skipping duplicate irdeto
[ 15:25:06 ] [ Keyman ] Adding key 00000000ffffff type 1 on Provider 000002 for
caid 1702 ID=2
[ 15:25:06 ] [ Keyman ] Skipping duplicate irdeto
[ 15:25:06 ] [ Keyman ] Adding key 00000000ffffff type 1 on Provider 000003 for
caid 1702 ID=3
[ 15:25:08 ] [ Loader ] Card 1702 on port /dev/tts/1 ready
[ 15:25:08 ] [ Loader ] Starting Newcamd Server on port 25030
[ 15:25:08 ] [ Newcamd ] Newcamd thread Server started on port 25030
[ 15:25:08 ] bind: error! 98: Address already in use
[ 15:25:08 ] [ NewCS ] Ready to GO!
/var #
Ich habe eine S02 Karte am laufen mit Newcs 1.62 und CCcam 2.0.9 in einer Dbox2 Philips mit MC 3.0 und Zebradem Image 3.0.
und gleichzeitig bekomm ich eine andere Karte von einer Dreambox (Ich als Client).
Folgendes Problem:Bei mir läuft alles einwandfrei doch bei meinem Schwager der von mir shared bleibt das bild alle 20 sec. hängen und läuft wieder nach 5-10 sec.ausser wenn er den gleichen Sender wie ich schaut dann nicht.
und er bekommt auch die Karte die ich von meinem Bruder geshared bekomme von mir geshared und da läuft alles super nur bei der Karte die bei mir im MC steckt friert das Bild bei ihm ein.
Daher vermute ich mal das es am Newcs liegt die Karte läuft bei mir mit 6.00 Mhz im MC ohne frequenzautomatik.
meine newcs config:
BODY{font:x-small 'Verdana';margin-right:1.5em} .c{cursor:hand} .b{color:red;font-family:'Courier New';font-weight:bold;text-decoration:none} .e{margin-left:1em;text-indent:-1em;margin-right:1em} .k{margin-left:1em;text-indent:-1em;margin-right:1em} .t{color:#990000} .xt{color:#990099} .ns{color:red} .dt{color:green} .m{color:blue} .tx{font-weight:bold} .db{text-indent:0px;margin-left:1em;margin-top:0px;margin-bottom:0px;padding-left:.3em;border-left:1px solid #CCCCCC;font:small Courier} .di{font:small Courier} .d{color:blue} .pi{color:blue} .cb{text-indent:0px;margin-left:1em;margin-top:0px;margin-bottom:0px;padding-left:.3em;font:small Courier;color:#888888} .ci{font:small Courier;color:#888888} PRE{margin:0px;display:inline} <?xml version="1.0" ?>
- <!-- For setup-issues, look in readme.txt! If there are other troubles, try different forums or irc channels around ) The configfile are NOT case-sensitive, and shouldnt care about dos/unix cr/lf. ** This is the example file for Dbox. -->
Du musst dich
Anmelden
oder
Registrieren
um diesen link zusehen!
<newCSconfig>Du musst dich
Anmelden
oder
Registrieren
um diesen link zusehen!
<readers name="Dbox">Du musst dich
Anmelden
oder
Registrieren
um diesen link zusehen!
<device><name>Multicam</name>
<type>dbox</type>
<mhz>600</mhz>
<node>/dev/tts/1</node>
<parity>odd</parity>
<reset>hard</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
- <!-- <boxkey>0000000000</boxkey> -->
- <!-- <rsa>0000000000</rsa> -->
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000 0 00000000000000000000000000000000000000000000000000000000000000000000000000000000 0 000000000000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000 0 00000000000000000000000000000000000000000000000000000000000000000000000000000000 0 000000000000000000</ipk>
<ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000 0 00000000000000000000000000000000000000000000000000000000000000000000000000000000 0 000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>25030</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
</readers>
Du musst dich
Anmelden
oder
Registrieren
um diesen link zusehen!
<radegastserver><enabled>No</enabled>
<port>16000</port>
Du musst dich
Anmelden
oder
Registrieren
um diesen link zusehen!
<allow><hostname>localhost????</hostname>:2:
</allow>
</radegastserver>
Du musst dich
Anmelden
oder
Registrieren
um diesen link zusehen!
<cache><emm>20</emm>
<ecm>20</ecm>
</cache>
Du musst dich
Anmelden
oder
Registrieren
um diesen link zusehen!
<debug><password>webinterfacepasswd</password>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
Du musst dich
Anmelden
oder
Registrieren
um diesen link zusehen!
<newcamdserver><enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
Du musst dich
Anmelden
oder
Registrieren
um diesen link zusehen!
<user><name>Muster</name>
<password>Muster1</password>
<hostname>welche IP kommt hier rein</hostname>:2:
<port>12000</port>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
<rate>2</rate>
</user>
</newcamdserver>
</newCSconfig>
und welche Ip kommt den in localhost???
und bei der CCcam.cfg der clienten steht
F: user3 user3
F: user3 user3
ich würde mich sehr über ein bischen hilfe freuen danke euch schon mal:1:
das kommt über telnet
/var # newcs -dv
This is NewCS 1.62 - the New CardServer by the Butter-team..
Compiled on Aug 27 2008 at 16:49:31
Reading Config file from /var/tuxbox/config/newcs.xml
TCP-log password is enabled, set to: webinterfacepasswd
TCP-log set to simple mode
level: normal
type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 15:25:01 ] [ Box detect ] Box type 4 (Dbox2)
[ 15:25:01 ] [ Config ] Option <blockc0> for device 0 (Multicam) not present, de
faulting to NO
[ 15:25:01 ] [ Config ] Value in <ipk> for device 0 (Multicam) is INVALID, skipp
ing...
[ 15:25:01 ] [ Config ] Value in <ucpk> for device 0 (Multicam) is INVALID, skip
ping...
[ 15:25:01 ] [ Config ] Pincode for device 0 (Multicam): 0000
[ 15:25:01 ] [ Config ] /dev/tts/1 ECM priority: round
[ 15:25:01 ] [ EMM Cache ] Initialising dynamic Cache
[ 15:25:01 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 1745
[ 15:25:01 ] [ Loader ] Starting Telnet on port 1001
[ 15:25:01 ] bind: error! 98: Address already in use
[ 15:25:01 ] [ Loader ] Reader type 4 on node /dev/tts/1
[ 15:25:01 ] [ Dbox ] Opening device /dev/tts/1
[ 15:25:02 ] [ Loader ] Unknown card
[ 15:25:02 ] [ Loader ] Trying Irdeto (T=14)
[ 15:25:02 ] [ Loader ] Reader type 4 on node /dev/tts/1
[ 15:25:02 ] [ Dbox ] Opening device /dev/tts/1
[ 15:25:04 ] [ ATR ] T=14 1etu=104.17us Guardtime:17etu WWT:9600etu
[ 15:25:04 ] [ ATR ] Historical bytes: I R D E T O A C S [03] [84] U [FF] [80]
[ 15:25:04 ] [ Loader ] Init Irdeto card
[ 15:25:05 ] [ Keyman ] Adding key 000000007a0f7f type 0 on Provider 000000 for
caid 1702 ID=0
[ 15:25:05 ] [ Keyman ] Adding key 00000000ffffff type 1 on Provider 000000 for
caid 1702 ID=0
[ 15:25:05 ] [ Keyman ] Skipping duplicate irdeto
[ 15:25:05 ] [ Keyman ] Adding key 00000000ffffff type 1 on Provider 000001 for
caid 1702 ID=1
[ 15:25:06 ] [ Keyman ] Skipping duplicate irdeto
[ 15:25:06 ] [ Keyman ] Adding key 00000000ffffff type 1 on Provider 000002 for
caid 1702 ID=2
[ 15:25:06 ] [ Keyman ] Skipping duplicate irdeto
[ 15:25:06 ] [ Keyman ] Adding key 00000000ffffff type 1 on Provider 000003 for
caid 1702 ID=3
[ 15:25:08 ] [ Loader ] Card 1702 on port /dev/tts/1 ready
[ 15:25:08 ] [ Loader ] Starting Newcamd Server on port 25030
[ 15:25:08 ] [ Newcamd ] Newcamd thread Server started on port 25030
[ 15:25:08 ] bind: error! 98: Address already in use
[ 15:25:08 ] [ NewCS ] Ready to GO!
/var #