bekomme meine karte nicht zum laufen

[reader]
label = skyv14
enable = 0
protocol = mouse
device = /dev/ttyUSB0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 600
group = 1
emmcache = 1,1,2,0
blockemm-g = 1
ndsversion = 2

skyv14 [mouse] ERROR: not ready to write, timeout=0 ms
skyv14 [mouse] Timeout in IO_Serial_WaitToWrite, delay=0 us, timeout=868 us
skyv14 [mouse] ERROR: not ready to write, timeout=0 ms
skyv14 [mouse] Timeout in IO_Serial_WaitToWrite, delay=0 us, timeout=868 us
skyv14 [mouse] card system not supported
skyv14 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
skyv14 [mouse] card initializing error

[reader]
label = skyv14
protocol = mouse
device = /dev/ttyUSB0
services = skyv14,sky-hdv14,sky-ppvv14,sky-3dv14,sky-hdplusv14
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 600
group = 1
emmcache = 1,1,2,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

skyv14 [mouse] Buffers readed 13 bytes total time_us 97122
skyv14 [mouse] ATR: 3F xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
skyv14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
skyv14 [mouse] Calculated work ETU is 104.20 us reader mhz = 357
skyv14 [mouse] Flush readed byte Nr 1 value af time_us 1020
skyv14 [mouse] Flush readed byte Nr 2 value 69 time_us 1963
skyv14 [mouse] Flush readed byte Nr 3 value 00 time_us 977
skyv14 [mouse] Flush readed byte Nr 4 value ad time_us 1964
skyv14 [mouse] Flush readed byte Nr 5 value f5 time_us 1987
skyv14 [mouse] Flush readed byte Nr 6 value f0 time_us 972
skyv14 [mouse] Flush readed byte Nr 7 value ff time_us 1985
skyv14 [mouse] Flush readed byte Nr 8 value ff time_us 1972
skyv14 [mouse] Flush readed byte Nr 9 value f5 time_us 974
skyv14 [mouse] Flush readed byte Nr 10 value 73 time_us 1985
skyv14 [mouse] Flush readed byte Nr 11 value 3f time_us 1967
skyv14 [mouse] Buffers readed 11 bytes total time_us 93141
skyv14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
skyv14 [mouse] ERROR: not ready to write, timeout=1 ms
skyv14 [mouse] Timeout in IO_Serial_WaitToWrite, delay=0 us, timeout=1458 us
skyv14 [mouse] ERROR: not ready to write, timeout=1 ms
skyv14 [mouse] Timeout in IO_Serial_WaitToWrite, delay=0 us, timeout=1458 us
skyv14 [mouse] card system not supported
skyv14 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
skyv14 [mouse] card initializing error

was bedeutet die fehlermeldung
skyv14 [mouse] ERROR: not ready to write, timeout=0 ms