Guten Tag,
langsam aber sicher komme ich durch viel lesen und probieren sehr gut klar wenn es um das Thema DM 800 se geht doch jetzt stehe ich vor der nächste Hürde.
Habe dieses Image drauf : NewnigmaeB-DM800SE-SIM2.SSL84B-2012
Diese Version will ich Installieren : enigma2-plugin-extensions-barryallen_6.0.8_mipsel
Jetzt hatte ich es einmal mit DCC-E2 1.30 versucht (über FTP) doch dann bekomme ich diese Meldung.
Eingegeben habe ich bei Telnet : opkg install /tmp/enigma2-plugin-extensions-barryallen*.ipk
Installing enigma2-plugin-extensions-barryallen (6.0.8) to flash...
================================================================
dm800se
================================================================
Barry Allen stoppt udev, rebooten Sie um es zurueck zu bekommen
Barry Allen Device wird /dev/sdb1 !
Erasing Barry Allen device ...
Making empty ext3 Filesystem ...
Configuring enigma2-plugin-extensions-barryallen
Integrating Barry Allen into Flash Image
/MB_Images link will be created to /media/hdd/backup
Integrating Barry Allen into WebIF
Flash Kernel Version: 2.6.18-7.4-dm800se
Barry Allen feels home at /dev/sdb1
bapostinst is disabled - enable with the Barry Allen Plugin if wanted
--------------------------------------------------------------
If your Flash image has no loop device driver built into the
kernel don't forget to install kernel-module-loop !!!!
--------------------------------------------------------------
Installation or Upgrade of Barry Allen is now finished !
If this is a new installation, then please reboot NOW
to check if Barry Allen Plugin shows up in the Plugin List !
--------------------------------------------------------------
PS: You can ignore any file_move, remove or Can't open status file
errors after this, they don't hurt
--------------------------------------------------------------
root@dm800se:~#
Dann habe ich das File auf den Stick gepackt und versucht so zu installieren.
Die Installation lief durch und ich rebootete den Receiver doch ich kann das Plugin niergendwo finden.
langsam aber sicher komme ich durch viel lesen und probieren sehr gut klar wenn es um das Thema DM 800 se geht doch jetzt stehe ich vor der nächste Hürde.
Habe dieses Image drauf : NewnigmaeB-DM800SE-SIM2.SSL84B-2012
Diese Version will ich Installieren : enigma2-plugin-extensions-barryallen_6.0.8_mipsel
Jetzt hatte ich es einmal mit DCC-E2 1.30 versucht (über FTP) doch dann bekomme ich diese Meldung.
Eingegeben habe ich bei Telnet : opkg install /tmp/enigma2-plugin-extensions-barryallen*.ipk
Installing enigma2-plugin-extensions-barryallen (6.0.8) to flash...
================================================================
dm800se
================================================================
Barry Allen stoppt udev, rebooten Sie um es zurueck zu bekommen
Barry Allen Device wird /dev/sdb1 !
Erasing Barry Allen device ...
Making empty ext3 Filesystem ...
Configuring enigma2-plugin-extensions-barryallen
Integrating Barry Allen into Flash Image
/MB_Images link will be created to /media/hdd/backup
Integrating Barry Allen into WebIF
Flash Kernel Version: 2.6.18-7.4-dm800se
Barry Allen feels home at /dev/sdb1
bapostinst is disabled - enable with the Barry Allen Plugin if wanted
--------------------------------------------------------------
If your Flash image has no loop device driver built into the
kernel don't forget to install kernel-module-loop !!!!
--------------------------------------------------------------
Installation or Upgrade of Barry Allen is now finished !
If this is a new installation, then please reboot NOW
to check if Barry Allen Plugin shows up in the Plugin List !
--------------------------------------------------------------
PS: You can ignore any file_move, remove or Can't open status file
errors after this, they don't hurt
--------------------------------------------------------------
root@dm800se:~#
Dann habe ich das File auf den Stick gepackt und versucht so zu installieren.
Die Installation lief durch und ich rebootete den Receiver doch ich kann das Plugin niergendwo finden.