Allgemein Neue Software Version des Controllers erschienen.

[dezember2011]

Hallo zusammen,

die Version 6.0.20 hat das Test-Stadium verlassen, und kann jetzt installiert werden.

Viel Spaß beim Updaten

P.S.: Bei mir lief das Update ohne Probleme durch.

 

[dezember2011]

Damit wir diese Woche wieder was zu tun haben:​

UniFi Network Controller 6.0.36​

Overview​

This is a patch release, full changelog of 6.0 version see

Sie müssen registriert sein, um Links zu sehen.

.

Improvements​

• Add info and link to DHCP Relay in Network form.
• Add U6 device images.
• Add event handling for missing DHCP Relay Server.
• SSID byte length validation changed from 31 to 32.
• Improve the request to resolve fingerprint icon in Beta Clients page.
• Beta Settings - SSH section validation improvements.
• Free package trial rule updates.
• Enable New Settings & Clients pages by default.

Bugfixes​

• Fix peak client count being sometimes shown lower than current client count.
• Fix not being able to click Next button in Schedule Upgrade form.
• Fix being unable to save device SSH password, Allow hyphens in form validation of hostname.
• Fix a runtime error in new dashboard caused by unrecognised browsers timezone.
• Fix DPI App restrictions not getting applied when saved from New Settings.
• Fix form validation in New Settings for cases when hostname includes hyphens.
• Fix screen becoming blank when clicking "cancel" during AP edit or create.
• Fix Network Controller crashing the UniFi OS Portal upon quick navigation.
• Fix DHCP Relay link in network form.
• Fix Settings - Security - internet threat management page not opening on UCK.
• Fix users being unable to save Threat Management changes.
• Fix empty SSID from backup breaking WiFi form.
• Fix error occurring in network table parsing when disconnecting devices.
• Remove custom upgrade option for UDM.
• Remove endpoint scan from Clients.
• Allow to disable RADIUS without password.
• Table UX (width) fixes in Clients page.
• Use correct placeholder for UDM commit error notifications.
• VLAN settings are not provisioned for Wireless Uplink on UDM-Base.
• Don't count UAP's BSSIDs as clients.
• Enable Auto Scale Network for default network created during setup.
• Disable SSID action buttons upon initial click while controller is processing the request.
• Resolve the 'Module "base-unifi" is not available!' error that appears when trying to load UniFi Network controller from the Remote Management Service.
• Ensure the correct content placeholder appears in Dashboard in place of WiFi Experience chart, if user has no APs adopted.
• Show a placeholder if users have no APs adopted.
• IAPP Key is not provisioned.
• Allow deleting WAN2 after restoring UDM-Pro backup on USG setup.
• Rectify the list of devices shown as unsupported for certain features.
• Close the survey modal 2 seconds after it has been submitted.
• WiFiman topology adjustments.
• Handle unsuccessful page loads in WiFiman page by displaying a Toast.

 

[Phantom]

UniFi Network Controller 6.0.4​

Overview​

This is a patch release, full changelog of 6.0 version see

Sie müssen registriert sein, um Links zu sehen.

.

Improvements​

• Dashboard - Update "Learn More" URL for access points promotion if WiFi experience not available.
• Combine Radio accordions into one in property panel of AP.
• Add a banner in Beta Settings to allow reverting back to Classic Settings.
• Expose Advanced Features and Remove "Enable advanced features" checkbox in Classic Settings.
• Add Wifi, Hotspot, and AP Group membership overview info in property panel of APs.
• Rename Strict mode to Interference Blocker.
• Exclude Microsoft Edge from unsupported browsers
• Use device display names for User AP roaming notifications.

Bugfixes​

• Add missing Network Scanners in Security Settings for UXG.
• Resolve migration issues for users without DHCP Snooping setting in controller Database.
• Allow configuring USP devices which were adopted in versions older than 5.14.
• Fix UXG-Pro - cannot configure fixed IPs of clients (New Clients page).
• Fix DHCP Name Server is not properly saved in New Settings.
• Fix missing logs in support file for Cloud Key with UniFi OS.
• Fix missing clients on Dashboard.
• Fix missing Mobile Notifications and Cloud E-mails.
• Fix layout of grid view on Clients page.
• Fix timezone related runtime error causing crashes in New Dashboard.
• Fix the empty form for Radius Authentication Server.
• Fix showing no client if the WiFi Experience is 0.
• Fix showing disconnected wireless clients as wired clients.
• Fix GHz spelling.
• Update Minimum RSSI range.
• Update default state for fresh AP Meshing.
• Display Interference Block toggle only if Minimum RSSI enabled.
• Display "Auto" as default selected option in AP Uplink Priorities.
• Suppress events without proper handling.
• Clients Grid view design visual fixes.
• DNS server now can be deleted from WAN form.
• Show device alias in client grid if it's available.
• Show WiFi experience as N/A if no clients are connected.
• AP Radio advanced configuration adjustments.
• Allow toggling Guest Portal for Hotspots in Hotspot form.
• Prevent showing WiFi Experience over 100%.

 

[borsel]

6.0.41 steht mir zum Download zur Verfügung.

 

[dezember2011]

Damit wir zwischen den Feiertagen ein bisschen was zu tun haben. Es gibt eine neue Version der Controller Software:

UniFi Network Controller 6.0.43​

122
28k

Overview​

This is a patch release, full changelog of 6.0 version see

Sie müssen registriert sein, um Links zu sehen.

.

Improvements​

• Disable ATF toggle for certain devices.
• Add Advanced Feature Toggles, Data Rate Controls, MAC Authorisation in WiFi form.
• Rename Client Groups to Bandwidth Profiles.
• Display Site Switcher on Cloud Key with UniFi OS and multiple sites.
• Add an option to download server log file in new Settings.

Bugfixes​

• Fix provisioning WLAN changes for USP-Plug & USP-Strip and their uplinks.
• Fix adoption of USP-Plug & USP-Strip if user has separate 5GHz only WiFi.
• Fix issues during migration if Site has incorrect config.
• Fix Unknown device names in Cloud Emails.
• Fix Firmware cache table columns and their height.
• Fix overlapping column headers in Alert.
• Fix alerts page crashing.
• Fix event message rendering.
• Fix historical U-LTE data stat processing.
• Fix loading translations while using CORS.
• Fix models names for APs.
• Fix list of available backups to restore during the Setup of controller.
• Fix headings for UDM and UBB radio details.
• Fix blinking ports on UDM icon on Dashboard.
• Fix blinking IPs and text messages.
• Display Meshing settings only for last of 5GHz radios.
• Disable Bluetooth after Setup is completed on UDM-Pro.
• Resolve UCK-G2 identification issues.
• Migrate minimum RSSI settings to new range (from -67 to -90 dBm).
• Update minimum RSSI radio range in slider.
• Update UI for WiFi form Advanced section.
• Prevent deletion of WAN2 network on UXG-Pro.

Additional information​

(Recommended) - Create an up-to-date backup before upgrading your controller in the event any issues are encountered.

• Existing UniFi Network controllers must be on one of the following versions in order to upgrade directly to this version:

6.0.43 and earlier 6.0.x versions.
5.14.25 and earlier 5.14.x versions.
5.13.33 and earlier 5.13.x versions.
5.12.72 and earlier 5.12.x versions.
5.11.52 and earlier 5.11.x versions.
5.10.27 and earlier 5.10.x versions.
5.9.33 and earlier 5.9.x versions.
5.8.30 and earlier 5.8.x versions.
5.7.28 and earlier 5.7.x versions.
5.6.42 and earlier 5.6.x versions.
Most earlier versions are also supported for direct upgrade, going back to 3.1.0.

• Controller updates may cause your adopted devices to reprovision after controller upgrades.
• An updated/current version of Java 8 must be installed on the system hosting the controller software. Java 9 and later are not yet supported.
• As of UniFi Network controller 5.9, if using Cloud Access, the host system/device requires outbound 8883/tcp to be open/unrestricted. Find up-to-date port requirements
  Sie müssen registriert sein, um Links zu sehen.
  .
• Minimum supported device firmware for U6-Series devices is 5.29.0, UAP/USW is 4.0.9, and for USG it's 4.4.34.
• If you have any 'service dns forwarding options' configuration defined in config.gateway.json, it will overwrite the provisioning of statically defined name servers, leaving you with no DNS. Either remove the 'service dns forwarding options' portion of config.gateway.json, or add additional 'options' lines defining name servers, such as 'server=1.1.1.1', 'server=8.8.8.8', etc.

Microsoft Windows specific

• Users running 64-bit Windows should only have 64-bit Java installed. If you have 32-bit Java installed then we recommend uninstalling it.

macOS Specific

• We stopped bundling Java as of UniFi Network 5.11.47. If you're installing that release or later please make sure you have manually installed a current release of Java 8 beforehand. Only the Java Runtime Environment (JRE) is required.
• Oracle JRE 8 offers the simplest path as it will simply "just work" without requiring any changes. We may investigate alternative JVMs and update this message accordingly.

Debian/Ubuntu specific

• For Debian/Ubuntu users installing via our repo, please update your APT source (see
  Sie müssen registriert sein, um Links zu sehen.
  ).
• We support MongoDB 3.6 since 5.13.10, older controllers only support up to MongoDB 3.4.

 

[dezember2011]

Guten Morgen,

für alle die heute das Homeoffice etwas spannender machen wollen, gibt es eine Aktualisierung der Controller Software:

UniFi Network Controller 6.0.45​

Overview​

This is a patch release, full changelog of 6.0 version see

Sie müssen registriert sein, um Links zu sehen.

.

Improvements​

• Add Multi-Site Management toggle. *
• Add WiFi, Hotspot, Network, Internet definition fields to search.
• Add a link to Hotspot Manager in new settings.
• Include Data Retention in search results.
• Move WiFi AI to Advanced Features.
• Clear Settings Search upon leaving Settings page.
• Scroll to validation error upon trying to submit a form that has invalid inputs.
• Update Property Panel for USP-Strip.

* Not available for UDM-Base and UDM-Pro.

Bugfixes​

• Fix saving U-LTE configuration in classic Property Panel.
• Fix being unable to save WiFi RADIUS Authorization settings.
• Fix incorrect WiFi Experience in History tab in Client Property Panel.
• Fix broken positioning for Port Profile Storm Control warning icon.
• Fix being unable to open Threat Management.
• Fix Delay in Dashboard WiFi widget after removing all APs.
• Show Missing Security Protocol section in WiFi Network form.
• Display correct active client count for WiFi configurations on UDM setups.
• Disable VPN settings for L3 Networks.
• Remove Auto IPsec VTI for UDM/UXG.
• Filter out UBBs from clients list.

Additional information​

(Recommended) - Create an up-to-date backup before upgrading your controller in the event any issues are encountered.

• Existing UniFi Network controllers must be on one of the following versions in order to upgrade directly to this version:

6.0.45 and earlier 6.0.x versions.
5.14.25 and earlier 5.14.x versions.
5.13.33 and earlier 5.13.x versions.
5.12.72 and earlier 5.12.x versions.
5.11.52 and earlier 5.11.x versions.
5.10.27 and earlier 5.10.x versions.
5.9.33 and earlier 5.9.x versions.
5.8.30 and earlier 5.8.x versions.
5.7.28 and earlier 5.7.x versions.
5.6.42 and earlier 5.6.x versions.
Most earlier versions are also supported for direct upgrade, going back to 3.1.0.

• Controller updates may cause your adopted devices to reprovision after controller upgrades.
• An updated/current version of Java 8 must be installed on the system hosting the controller software. Java 9 and later are not yet supported.
• As of UniFi Network controller 5.9, if using Cloud Access, the host system/device requires outbound 8883/tcp to be open/unrestricted. Find up-to-date port requirements
  Sie müssen registriert sein, um Links zu sehen.
  .
• Minimum supported device firmware for U6-Series devices is 5.29.0, UAP/USW is 4.0.9, and for USG it's 4.4.34.
• If you have any 'service dns forwarding options' configuration defined in config.gateway.json, it will overwrite the provisioning of statically defined name servers, leaving you with no DNS. Either remove the 'service dns forwarding options' portion of config.gateway.json, or add additional 'options' lines defining name servers, such as 'server=1.1.1.1', 'server=8.8.8.8', etc.

Microsoft Windows specific

• Users running 64-bit Windows should only have 64-bit Java installed. If you have 32-bit Java installed then we recommend uninstalling it.

macOS Specific

• We stopped bundling Java as of UniFi Network 5.11.47. If you're installing that release or later please make sure you have manually installed a current release of Java 8 beforehand. Only the Java Runtime Environment (JRE) is required.
• Oracle JRE 8 offers the simplest path as it will simply "just work" without requiring any changes. We may investigate alternative JVMs and update this message accordingly.

Debian/Ubuntu specific

• For Debian/Ubuntu users installing via our repo, please update your APT source (see
  Sie müssen registriert sein, um Links zu sehen.
  ).
• We support MongoDB 3.6 since 5.13.10, older controllers only support up to MongoDB 3.4.

 

[borsel]

Ich habe irgendwie das Gefühl, dass ich seit der neuen Oberfläche auf dem CloudKey, die neueste Version nicht mehr angezeigt bekomme. Ich kann ja nun nicht mehr direkt im UnifiController updaten, sondern muss das über die Verwaltungssoftware des CloudKeys machen. Dort unter Apps kann man ja auf Updates checken. Aber irgendwie bekomme ich nix neues angezeigt, obwohl ich die Version 6.0.43.0 drauf hab.

 

[dezember2011]

Ich habe den Controller in einem Ubuntu Container laufen. Da ließ sich das Update ohne Probleme installieren.

 

[borsel]

Ja bisher hatte ich auf dem CK2 auch immer alle Updates, als man sie noch im Controller selber machen konnte.

Kommando zurück. Heute Morgen wird das Update auf 6.0.45 angezeigt. Wird bestimmt nacheinander ausgerollt ...

 

[dezember2011]

Hat schon jemand die 6.2.26 installiert?

 

[Phantom]

Ich bin bei 6.3.51. Es läuft sehr stabil.

 

[borsel]

Ja, ich bin bei 6.2.26 auf einem CK2. Seit Version 6.2.25 bin ich aber irgendwie nicht mehr zufrieden. Es läuft nicht mehr wie gewohnt. Habe dazu auch einen eigenen Thread ...

 

[dezember2011]

Wichtiges Update für den Controller (Log4Shell)​

UniFi Network Application 6.5.54​

Bugfixes​

• Fix a security vulnerability found in a 3rd party library (CVE-2021-44228).

Additional information​

(Recommended) - Create an up-to-date backup before upgrading your UniFi Network Application settings in the event any issues are encountered.

• Existing UniFi Network Applications must be on one of the following versions in order to upgrade directly to this version:

6.5.54 and earlier 6.5.x versions.
6.4.54 and earlier 6.4.x versions.
6.3.51 and earlier 6.3.x versions.
6.2.26 and earlier 6.2.x versions.
6.1.71 and earlier 6.1.x versions.
6.0.45 and earlier 6.0.x versions.
5.14.25 and earlier 5.14.x versions.
5.13.33 and earlier 5.13.x versions.
5.12.72 and earlier 5.12.x versions.
5.11.52 and earlier 5.11.x versions.
5.10.27 and earlier 5.10.x versions.
5.9.33 and earlier 5.9.x versions.
5.8.30 and earlier 5.8.x versions.
5.7.28 and earlier 5.7.x versions.
5.6.42 and earlier 5.6.x versions.
Most earlier versions are also supported for direct upgrade, going back to 3.1.0.

• UniFi Network Application updates may cause your adopted devices to reprovision.
• An updated/current version of Java 8 must be installed on the system hosting the UniFi Network Application. Java 9 and later are not yet supported.
• As of UniFi Network Application version 5.9, if using Cloud Access, the host system/device requires outbound 8883/tcp to be open/unrestricted. Find up-to-date port requirements
  Sie müssen registriert sein, um Links zu sehen.
  .
• Minimum supported device firmware for U6-Series devices is 5.29.0, UAP/USW is 4.0.9, and for USG it's 4.4.34.
• If you have any 'service dns forwarding options' configuration defined in config.gateway.json, it will overwrite the provisioning of statically defined name servers, leaving you with no DNS. Either remove the 'service dns forwarding options' portion of config.gateway.json, or add additional 'options' lines defining name servers, such as 'server=1.1.1.1', 'server=8.8.8.8', etc.

Microsoft Windows specific

• Users running 64-bit Windows should only have 64-bit Java installed. If you have 32-bit Java installed then we recommend uninstalling it.

macOS Specific

• We stopped bundling Java as of UniFi Network 5.11.47. If you're installing that release or later please make sure you have manually installed a current release of Java 8 beforehand. Only the Java Runtime Environment (JRE) is required.
• Oracle JRE 8 offers the simplest path as it will simply "just work" without requiring any changes. We may investigate alternative JVMs and update this message accordingly.

Debian/Ubuntu specific

• For Debian/Ubuntu users installing via our repo, please update your APT source (see
  Sie müssen registriert sein, um Links zu sehen.
  ).
• We support MongoDB 3.6 since 5.13.10, older UniFi Network Application versions only support up to MongoDB 3.4.

Checksums

585832649eda60a0ae50c950ff3c30b5 *UniFi-installer.exe
5b4b614d218c078f70c450e5d6f0e223 *UniFi.pkg
16bb1806b1bc56bb9dc2e9febd4aa9c3 *unifi_sysvinit_all.deb
601df32736f41e40a80a3e472450a3e1 *unifi_sh_api

 

[Gatzi]

Bitte Update auf 6.5.55 durchführen, dann ist auch die IT-Sicherheitslücke geschlossen.

 

[dezember2011]

Guten Morgen zusammen,

es gibt eine neue Version der Controller Software.

Viel Spaß beim Update

UniFi Network Application 7.0.21​

Overview​

* You can find the 7.0.20 release notes/changelog

Sie müssen registriert sein, um Links zu sehen.

.
* This release is currently a Release Candidate.

Improvements​

• Update DHCP Relay DHCP Servers copy, add global setting notice.

Bugfixes​

• Fix rare console lockup issue, when social websites are blocked on DNS level.
• Fix UXG-Pro remains disconnected after the application host changes IP.
• Fix AP Group selection.
• Fix configuring VPN servers for setups with a USG.

Additional information​

Please report any issues you encounter with this release using the

Sie müssen registriert sein, um Links zu sehen.

.
(Recommended) - Create an up-to-date backup before upgrading your UniFi Network Application settings in the event any issues are encountered.

• Existing UniFi Network Applications must be on one of the following versions in order to upgrade directly to this version:

7.0.21 and earlier 7.0.x versions.
6.5.55 and earlier 6.5.x versions.
6.4.54 and earlier 6.4.x versions.
6.3.51 and earlier 6.3.x versions.
6.2.26 and earlier 6.2.x versions.
6.1.71 and earlier 6.1.x versions.
6.0.45 and earlier 6.0.x versions.
5.14.25 and earlier 5.14.x versions.
5.13.33 and earlier 5.13.x versions.
5.12.72 and earlier 5.12.x versions.
5.11.52 and earlier 5.11.x versions.
5.10.27 and earlier 5.10.x versions.
5.9.33 and earlier 5.9.x versions.
5.8.30 and earlier 5.8.x versions.
5.7.28 and earlier 5.7.x versions.
5.6.42 and earlier 5.6.x versions.
Most earlier versions are also supported for direct upgrade, going back to 3.1.0.

• UniFi Network Application updates may cause your adopted devices to reprovision.
• An updated/current version of Java 8 must be installed on the system hosting the UniFi Network Application. Java 9 and later are not yet supported.
• As of UniFi Network Application version 5.9, if using Cloud Access, the host system/device requires outbound 8883/tcp to be open/unrestricted. Find up-to-date port requirements
  Sie müssen registriert sein, um Links zu sehen.
  .
• Minimum supported device firmware for U6-Series devices is 5.29.0, UAP/USW is 4.0.9, and for USG it's 4.4.34.
• If you have any 'service dns forwarding options' configuration defined in config.gateway.json, it will overwrite the provisioning of statically defined name servers, leaving you with no DNS. Either remove the 'service dns forwarding options' portion of config.gateway.json, or add additional 'options' lines defining name servers, such as 'server=1.1.1.1', 'server=8.8.8.8', etc.

Microsoft Windows specific

• Users running 64-bit Windows should only have 64-bit Java installed. If you have 32-bit Java installed then we recommend uninstalling it.

macOS Specific

• We stopped bundling Java as of UniFi Network 5.11.47. If you're installing that release or later please make sure you have manually installed a current release of Java 8 beforehand. Only the Java Runtime Environment (JRE) is required.
• Oracle JRE 8 offers the simplest path as it will simply "just work" without requiring any changes. We may investigate alternative JVMs and update this message accordingly.

Debian/Ubuntu specific

• For Debian/Ubuntu users installing via our repo, please update your APT source (see
  Sie müssen registriert sein, um Links zu sehen.
  ).
• We support MongoDB 3.6 since 5.13.10, older UniFi Network Application versions only support up to MongoDB 3.4.