gelöst Kein Dekodieren mit Easymouse/UM02

[TvhRulz]

Mahlzeit!

Mit Hilfe diverser Threads dieses Forums habe ich nun meinen Oscam Server mit einer Easymouse 2 und einer UM02 laufen. Die Logs sehen freundlich aus, solange ich auf keinen Sender tune. TVHeadend kann sich erfolgreich mit Oscam verbinden. Wenn ich jedoch einen Sender abrufen möchte (z.B. 13th Street, ist in meinen Abo), dann ist kein Dekodieren möglich. Die Inhalte im Log kann ich leider nicht interpretieren. Anbei meine oscam.server und den Fehler aus der Oscam Log. Vielleicht könnt ihr mir einen Hinweis geben, was er bedeutet?

Ach ja, meine Dipschalter sehen auf: 5v | Phoenix | -> | 6MHz

Spoiler: oscam.server

[reader]
label = UM02
description = UM02
protocol = mouse
device = /dev/ttyUSB0
autospeed = 0
caid = 1838
boxkey = A7...7C
rsakey = B5...FF
detect = cd
mhz = 600
cardmhz = 368
ident = 1838:000000,1838:000401,1838:001103
group = 1
emmcache = 1,2,2
blockemm-unknown = 1
blockemm-g = 1

Spoiler: oscam.log

2021/04/22 11:39:35 03ED10C8 c (dvbapi) Demuxer 1 trying to descramble PID 3 CAID 1838 PROVID 000000 ECMPID 0A00 ANY CHID PMTPID 0105 VPID 0002
2021/04/22 11:39:35 03ED10C8 c (ecm) tvheadend (1838@000000/0000/372F/92:E6230FC8C7DFD31423F2AB0CF35D4D5F): not found (1 ms) by UM02
2021/04/22 11:39:35 03ED10C8 c (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 4 disabled ecmpids!
2021/04/22 11:39:35 03ED10C8 c (dvbapi) Demuxer 0 trying to descramble PID 3 CAID 1838 PROVID 000000 ECMPID 0B5E ANY CHID PMTPID 0708 VPID 0001
2021/04/22 11:39:35 03ED10C8 c (ecm) tvheadend (1838@000000/0000/8150/92DE4C40247E98A0194602329A1D912DE): not found (1 ms) by UM02
2021/04/22 11:39:35 03ED10C8 c (dvbapi) Demuxer 1 restarting decoding requests after 0 ms with 1 enabled and 4 disabled ecmpids!
2021/04/22 11:39:35 03ED10C8 c (dvbapi) Demuxer 1 trying to descramble PID 3 CAID 1838 PROVID 000000 ECMPID 0A00 ANY CHID PMTPID 0105 VPID 0002
2021/04/22 11:39:35 03ED10C8 c (ecm) tvheadend (1838@000000/0000/372F/92:E6230FC8C7DFD31423F2AB0CF35D4D5F): not found (0 ms) by UM02
2021/04/22 11:39:35 03ED10C8 c (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 4 disabled ecmpids!
2021/04/22 11:39:35 03ED10C8 c (dvbapi) Demuxer 0 trying to descramble PID 3 CAID 1838 PROVID 000000 ECMPID 0B5E ANY CHID PMTPID 0708 VPID 0001
2021/04/22 11:39:35 03ED10C8 c (ecm) tvheadend (1838@000000/0000/8150/92DE4C40247E98A0194602329A1D912DE): not found (1 ms) by UM02
2021/04/22 11:39:35 03ED10C8 c (dvbapi) Demuxer 1 restarting decoding requests after 0 ms with 1 enabled and 4 disabled ecmpids!
2021/04/22 11:39:35 03ED10C8 c (dvbapi) Demuxer 1 trying to descramble PID 3 CAID 1838 PROVID 000000 ECMPID 0A00 ANY CHID PMTPID 0105 VPID 0002
2021/04/22 11:39:35 03ED10C8 c (ecm) tvheadend (1838@000000/0000/372F/92:E6230FC8C7DFD31423F2AB0CF35D4D5F): not found (2 ms) by UM02
2021/04/22 11:39:35 03ED10C8 c (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 4 disabled ecmpids!
2021/04/22 11:39:35 03ED10C8 c (dvbapi) Demuxer 0 trying to descramble PID 3 CAID 1838 PROVID 000000 ECMPID 0B5E ANY CHID PMTPID 0708 VPID 0001
2021/04/22 11:39:35 03ED10C8 c (ecm) tvheadend (1838@000000/0000/8150/92DE4C40247E98A0194602329A1D912DE): not found (0 ms) by UM02
2021/04/22 11:39:36 03ED10C8 c (dvbapi) Demuxer 1 restarting decoding requests after 0 ms with 1 enabled and 4 disabled ecmpids!
2021/04/22 11:39:36 03ED10C8 c (dvbapi) Demuxer 1 trying to descramble PID 3 CAID 1838 PROVID 000000 ECMPID 0A00 ANY CHID PMTPID 0105 VPID 0002
2021/04/22 11:39:36 03ED10C8 c (ecm) tvheadend (1838@000000/0000/372F/92:E6230FC8C7DFD31423F2AB0CF35D4D5F): not found (0 ms) by UM02
2021/04/22 11:39:36 03ED10C8 c (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 4 disabled ecmpids!
2021/04/22 11:39:36 03ED10C8 c (dvbapi) Demuxer 0 trying to descramble PID 3 CAID 1838 PROVID 000000 ECMPID 0B5E ANY CHID PMTPID 0708 VPID 0001
2021/04/22 11:39:36 03ED10C8 c (ecm) tvheadend (1838@000000/0000/8150/92DE4C40247E98A0194602329A1D912DE): not found (254 ms) by UM02 (lg)
2021/04/22 11:39:36 03ED10C8 c (ecm) tvheadend (1838@000000/0000/372F/92:E6230FC8C7DFD31423F2AB0CF35D4D5F): not found (375 ms) by UM02
2021/04/22 11:39:36 03ED10C8 c (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 4 disabled ecmpids!
2021/04/22 11:39:36 03ED10C8 c (dvbapi) Demuxer 0 trying to descramble PID 3 CAID 1838 PROVID 000000 ECMPID 0B5E ANY CHID PMTPID 0708 VPID 0001
2021/04/22 11:39:36 03ED10C8 c (dvbapi) Demuxer 1 restarting decoding requests after 0 ms with 1 enabled and 4 disabled ecmpids!
2021/04/22 11:39:36 03ED10C8 c (dvbapi) Demuxer 1 trying to descramble PID 3 CAID 1838 PROVID 000000 ECMPID 0A00 ANY CHID PMTPID 0105 VPID 0002

 

[Vigor]

Für eine UM02 Karte fehlen dir im Reader die Einträge
nuid =
cwekey =

Gruß
Vigor

 

[Hasimann]

vielleicht :autospeed = 1

 

[tem_invictus]

Für eine UM02 Karte fehlen dir im Reader die Einträge

Nur wenn er auch die privaten Kanäle in HD darüber empfangen will.


Nimm mal folgende beiden Einträge aus dem Reader zum test:

ident = 1838:000000,1838:000401,1838:001103
autospeed = 0

Und ein Log ab Start wäre super, damit wir sehen, ob die Karte richtig eingelesen wird.

 

[Vigor]

Wieso HD+?
Bei Kabel?

Gruß
Vigor

 

[tem_invictus]

hab meine Antwort mal abgeändert.
Meinte natürlich die privaten Sender in HD.

 

[Vigor]

Das wäre dann ja 13th Street, welchen er als Beispiel genannt hat.

Gruß
Vigor

 

[Pilot]

nein: 13thStreet ist Sky
Beim Kabel werden die HD+ Sender die privaten HD Sender genannt.
Sind aber selben Sender wie bei Sat die HD+ Sender.
Warum das so ist: keine Ahnung. Eventuell wegen der Kabel Verschlüsselung. Andere Caids...

 

[TvhRulz]

Danke für die schnellen Antworten.

Config geändert, ist nun wie folgt:

Spoiler: oscam.server

[reader]
label = UM02
description = UM02
protocol = mouse
device = /dev/ttyUSB0
# autospeed = 0
caid = 1838
boxkey = A7...7C
rsakey = B5...FF
nuid = A5...6D
cwekey = 20...0E
detect = cd
mhz = 600
cardmhz = 368
# ident = 1838:000000,1838:000401,1838:001103
group = 1
emmcache = 1,2,2
blockemm-unknown = 1
blockemm-g = 1

Das ist der Log-Start:

Spoiler: oscam.log-start

-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Thu Apr 22 14:33:31 2021
-------------------------------------------------------------------------------
2021/04/22 14:33:31 00000000 s >> OSCam << cardserver log switched, version 1.20_svn, build r11689 (arm-linux-gnueabihf-ssl)
2021/04/22 14:33:31 00000000 s (main) System name = Linux
2021/04/22 14:33:31 00000000 s (main) Host name = Minecraft
2021/04/22 14:33:31 00000000 s (main) Release = 5.4.51-v7+
2021/04/22 14:33:31 00000000 s (main) Version = #1333 SMP Mon Aug 10 16:45:19 BST 2020
2021/04/22 14:33:31 00000000 s (main) Machine = armv7l
2021/04/22 14:33:31 00000000 s (main) creating pidfile /var/run/oscam.pid with pid 4181
2021/04/22 14:33:31 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2021/04/22 14:33:31 00000000 s (main) signal handling initialized
2021/04/22 14:33:31 00000000 s (led) LED support is not active. Can't detect machine type.
2021/04/22 14:33:31 00000000 s (reader) UM02 [mouse] creating thread for device /dev/ttyUSB0
2021/04/22 14:33:31 00000000 s (main) waiting for local card init
2021/04/22 14:33:31 05800EF2 h (webif) webif: decompressed 185575 bytes back into 486844 bytes
2021/04/22 14:33:31 05800EF2 h (webif) HTTP Server running. ip=:: port=9999
2021/04/22 14:33:32 0BA28689 r (reader) UM02 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=368)
2021/04/22 14:33:32 0BA28689 r (reader) UM02 [mouse] card detected
2021/04/22 14:33:34 0BA28689 r (reader) UM02 [mouse] ATR: xxx
2021/04/22 14:33:34 0BA28689 r (reader) UM02 [mouse] Setting baudrate to 187500 bps
2021/04/22 14:33:35 0BA28689 r (reader) UM02 [mouse] detect native nagra card
2021/04/22 14:33:36 0BA28689 r (reader) UM02 [mouse] ready for requests
2021/04/22 14:33:36 0BA28689 r (reader) UM02 [mouse] found card system nagra
2021/04/22 14:33:36 0BA28689 r (reader) UM02 [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1
2021/04/22 14:33:36 0BA28689 r (reader) UM02 [nagra] ROM: D N A S P 1 4 2
2021/04/22 14:33:36 0BA28689 r (reader) UM02 [nagra] REV: R e v G 0 6
2021/04/22 14:33:36 0BA28689 r (reader) UM02 [nagra] SER: ############
2021/04/22 14:33:36 0BA28689 r (reader) UM02 [nagra] CAID: 1838
2021/04/22 14:33:36 0BA28689 r (reader) UM02 [nagra] Prv.ID: 00 00 04 01 (sysid)
2021/04/22 14:33:36 0BA28689 r (reader) UM02 [nagra] Prv.ID: 00 00 00 00
2021/04/22 14:33:36 0BA28689 r (reader) UM02 [nagra] IRD ID: ############
2021/04/22 14:33:36 0BA28689 r (reader) UM02 [nagra] active to: 2021/07/20 12:59
2021/04/22 14:33:36 0BA28689 r (reader) UM02 [nagra] -----------------------------------------
2021/04/22 14:33:36 0BA28689 r (reader) UM02 [nagra] |id |tier |valid from |valid to |
2021/04/22 14:33:36 0BA28689 r (reader) UM02 [nagra] +----+--------+------------+------------+
2021/04/22 14:33:36 0BA28689 r (reader) UM02 [nagra] |1103|3084 |2021/03/21 |2021/07/20 |
2021/04/22 14:33:36 0BA28689 r (reader) UM02 [nagra] |1103|5924 |2021/03/21 |2021/07/20 |
2021/04/22 14:33:36 0BA28689 r (reader) UM02 [nagra] |1103|585D |2021/03/21 |2021/07/20 |
2021/04/22 14:33:36 0BA28689 r (reader) UM02 [nagra] -----------------------------------------
2021/04/22 14:33:37 00000000 s (main) init for all local cards done
2021/04/22 14:33:37 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2021/04/22 14:33:37 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2021/04/22 14:33:37 00000000 s (anticasc) anti cascading disabled
2021/04/22 14:33:37 00000000 s (gbox) local gbox failed init
2021/04/22 14:33:37 4CEFD8F9 c (client) plain dvbapi-client granted (tvheadend, au=auto (1 reader))
2021/04/22 14:33:37 4CEFD8F9 c (dvbapi) dvbapi channelcache loaded from /etc/oscam/oscam.ccache
2021/04/22 14:33:37 4CEFD8F9 c (dvbapi) Using TCP listen socket, API forced to DVBAPIv3 (0), userconfig boxtype: 11

Und hier das Dekodieren, immer noch fehlerhaft:

Spoiler: oscam.log-fehler

2021/04/22 14:38:00 4CEFD8F9 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 098E ECM_PID: 1E80 PROVID: 000000
2021/04/22 14:38:00 4CEFD8F9 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 1868 ECM_PID: 1718 PROVID: 000000
2021/04/22 14:38:00 4CEFD8F9 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 1854 ECM_PID: 038F PROVID: 000000
2021/04/22 14:38:00 4CEFD8F9 c (dvbapi) Demuxer 0 ecmpid 3 CAID: 1838 ECM_PID: 0B5E PROVID: 000000
2021/04/22 14:38:00 4CEFD8F9 c (dvbapi) Demuxer 0 ecmpid 4 CAID: 1850 ECM_PID: 0390 PROVID: 000000
2021/04/22 14:38:00 4CEFD8F9 c (dvbapi) Demuxer 0 found 5 ECM pids and 1 STREAM pids in CA PMT
2021/04/22 14:38:00 4CEFD8F9 c (dvbapi) Demuxer 0 trying to descramble PID 3 CAID 1838 PROVID 000000 ECMPID 0B5E ANY CHID PMTPID 0708 VPID 0003
2021/04/22 14:38:00 4CEFD8F9 c (dvbapi) Demuxer 0 received updated CA PMT for program 372F
2021/04/22 14:38:00 4CEFD8F9 c (dvbapi) Demuxer 0 continues descrambling for program 372F
2021/04/22 14:38:00 4CEFD8F9 c (dvbapi) Demuxer 0 found 5 ECM pids and 1 STREAM pids in CA PMT
2021/04/22 14:38:01 4CEFD8F9 c (ecm) tvheadend (1838@000000/0000/372F/92:B03A817B91003ECC315FDDC1DD27D84C): not found (255 ms) by UM02 (lg)
2021/04/22 14:38:01 4CEFD8F9 c (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 4 disabled ecmpids!
2021/04/22 14:38:01 4CEFD8F9 c (dvbapi) Demuxer 0 trying to descramble PID 3 CAID 1838 PROVID 000000 ECMPID 0B5E ANY CHID PMTPID 0708 VPID 0003
2021/04/22 14:38:02 4CEFD8F9 c (ecm) tvheadend (1838@000000/0000/372F/92:B03A817B91003ECC315FDDC1DD27D84C): not found (0 ms) by UM02
2021/04/22 14:38:02 4CEFD8F9 c (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 4 disabled ecmpids!
2021/04/22 14:38:02 4CEFD8F9 c (dvbapi) Demuxer 0 trying to descramble PID 3 CAID 1838 PROVID 000000 ECMPID 0B5E ANY CHID PMTPID 0708 VPID 0003
2021/04/22 14:38:02 4CEFD8F9 c (ecm) tvheadend (1838@000000/0000/372F/92:B03A817B91003ECC315FDDC1DD27D84C): not found (0 ms) by UM02
2021/04/22 14:38:03 4CEFD8F9 c (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 4 disabled ecmpids!
2021/04/22 14:38:03 4CEFD8F9 c (dvbapi) Demuxer 0 trying to descramble PID 3 CAID 1838 PROVID 000000 ECMPID 0B5E ANY CHID PMTPID 0708 VPID 0003
2021/04/22 14:38:03 4CEFD8F9 c (ecm) tvheadend (1838@000000/0000/372F/92:B03A817B91003ECC315FDDC1DD27D84C): not found (1 ms) by UM02
2021/04/22 14:38:03 4CEFD8F9 c (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 4 disabled ecmpids!
2021/04/22 14:38:03 4CEFD8F9 c (dvbapi) Demuxer 0 trying to descramble PID 3 CAID 1838 PROVID 000000 ECMPID 0B5E ANY CHID PMTPID 0708 VPID 0003
2021/04/22 14:38:03 4CEFD8F9 c (ecm) tvheadend (1838@000000/0000/372F/92:B03A817B91003ECC315FDDC1DD27D84C): not found (0 ms) by UM02
2021/04/22 14:38:04 4CEFD8F9 c (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 4 disabled ecmpids!
2021/04/22 14:38:04 4CEFD8F9 c (dvbapi) Demuxer 0 trying to descramble PID 3 CAID 1838 PROVID 000000 ECMPID 0B5E ANY CHID PMTPID 0708 VPID 0003
2021/04/22 14:38:04 4CEFD8F9 c (ecm) tvheadend (1838@000000/0000/372F/92:B03A817B91003ECC315FDDC1DD27D84C): not found (1 ms) by UM02
2021/04/22 14:38:05 4CEFD8F9 c (dvbapi) Demuxer 0 restarting decoding requests after 1 ms with 1 enabled and 4 disabled ecmpids!
2021/04/22 14:38:05 4CEFD8F9 c (dvbapi) Demuxer 0 trying to descramble PID 3 CAID 1838 PROVID 000000 ECMPID 0B5E ANY CHID PMTPID 0708 VPID 0003
2021/04/22 14:38:05 4CEFD8F9 c (ecm) tvheadend (1838@000000/0000/372F/92:B03A817B91003ECC315FDDC1DD27D84C): not found (0 ms) by UM02

 

[Gast155155]

Edit : Gelöscht
Hab es Verwechselt.

 

[dodo83]

ATR ist doch bei allen gleich

welcher Sender ist das laut log?

 

[tem_invictus]

Zeig mal bitte deine oscam.conf und einen Screenshot Einstellungen tvheadend fürs cam.

 

[TvhRulz]

Spoiler: oscam.conf

[global]
logfile = /var/log/oscam.log
maxlogsize = 2048

[cache]

[dvbapi]
enabled = 1
au = 1
pmt_mode = 4
listen_port = 9000
user = tvheadend
boxtype = pc

[webif]
httpport = 9999
httpuser = admin
httppwd = xxx
httphideidleclients = 0
httpallowed = 0000:0000:0000:0000:0000:0000:0000:0000-ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff,::1,0.0.0.0-255.255.255.255

Spoiler

Du musst Regestriert sein, um das angehängte Bild zusehen.

Momentan läuft der Oscam Server auf einem anderen Raspi als TVHeadend.

 

[tem_invictus]

sry, oscam.user wäre auch noch interessant.


deine tvheadend version ist aber ziemlich alt.

 

[TvhRulz]

Spoiler: oscam.user

[account]
user = tvheadend
pwd = xxx
monlevel = 4
au = 1
group = 1

Ja, ich habe eine selbst angepasste TVH Version von 2017 laufen. Da steht in "start_real" und "stop_real" auch wirklich die echte Start-/Stopzeit drin. Bei den neueren Versionen ist das soviel ich weiß aber eh so.