Digital Eliteboard - Das Digitale Technik Forum

Registriere dich noch heute kostenloses um Mitglied zu werden! Sobald du angemeldet bist, kannst du auf unserer Seite aktiv teilnehmen, indem du deine eigenen Themen und Beiträge erstellst und dich über deinen eigenen Posteingang mit anderen Mitgliedern unterhalten kannst! Zudem bekommst du Zutritt zu Bereiche, welche für Gäste verwehrt bleiben

Dbox2 bleibt beim booten hängen

AW: Dbox2 bleibt beim booten hängen

Es gibt leider nur den Bootmanager und den Hallenberg. Prüfe doch mal alle Verbindungen und die Netzwerk Einstellungen. Vielleicht hast du dort etwas übersehen.
 
AW: Dbox2 bleibt beim booten hängen

netzwerk funzt zu 100% ich mein wie kann der bootmanager sonst flashen wenn etwas im netzwerk nicht stimmen sollte...
 
AW: Dbox2 bleibt beim booten hängen

firewall auch nicht vorhanden :)
 
AW: Dbox2 bleibt beim booten hängen

also ich krieg es nich auf die reihe ich kann auch das image auslesen was drauf ist auf der box aber wieso startet das dingens dann nicht :(
 
AW: Dbox2 bleibt beim booten hängen

versuche es einfach mal mit mehreren images.
das muß auf jeden fall klappen.
ich glaub nicht, das deine box hin ist.
manchmal nimmt der hallenberg es nicht auf anhieb.
 
AW: Dbox2 bleibt beim booten hängen

das ist ja mein problem ich hab etz 5 versch. images getestet und nix klappt...ich glaub ich probier etz noch 1 std dann geb ich es auf...
 
AW: Dbox2 bleibt beim booten hängen

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-e4.b1.19.07.00.00-9b
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0036

will verify ELF image, start= 0x800000, size= 163020
verify sig: 262
Branching to 0x40000


U-Boot 1.2.0 (Tuxbox) (Jul 19 2008 - 00:55:10)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: ... done.
env: found "console"
env: found "lcd_inverse"
env: found "lcd_contrast"
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
Bus Fault @ 0x01fd20a8, fixup 0x00000000
Machine check in kernel mode.
Caused by (from msr): regs 01fa9818 Unknown values in msr
NIP: 01FD20A8 XER: C000E97F LR: 01FD1FAC REGS: 01fa9818 TRAP: 0200 DAR: 00003A43

MSR: 00009002 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 00

GPR00: 00020003 01FA9908 00000000 01FA9A46 0008ZA43 0000000A FFFFFFFF FFFFFFFF
GPR08: 00000002 0000D2A0 00000001 01FA9910 00000000 00031B58 01FFAB00 01F8E000
GPR16: 00000001 00000080 00000001 01FA9C98 00000000 00000000 00000000 00000000
GPR24: 01FA9A30 00000002 FFFFFFFF 01FEE388 01FA9910 01FA9F94 01FFABA4 00000020
Call backtrace:
01FF3E3C 01FD2734 01FE1708 01FDDD08 01FDB490 01FDB6A0 01FD6D98
01FD03B0
machine check

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-e4.b1.19.07.00.00-9b
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0036

will verify ELF image, start= 0x800000, size= 163020
verify sig: 262
Branching to 0x40000


U-Boot 1.2.0 (Tuxbox) (Jul 19 2008 - 00:55:10)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: ... done.
env: found "console"
env: found "lcd_inverse"
env: found "lcd_contrast"
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 670275 bytes loaded to 0x100000
............................................................... done
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 670211 Bytes = 654.5 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.36.2-dbox2 (zebradem@Ubuntu) (gcc version 3.4.6) #2 Sa 19. Jul
00:55:35 CEST 2008
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0,9600 dbox_duplex= root=/dev/mtdblock2 rootfst
ype=squashfs
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30824k available (1140k kernel code, 344k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
half-duplex mode enabled
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1e:6c:74
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x00540000 : "root (squashfs)"
0x00540000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init



so sieht der normale bootlog im moment aus...
 
AW: Dbox2 bleibt beim booten hängen

problem gelöst..prozessor im eimer...anwärmen und die box bootet wieder ^^
danke trotzdem für die hilfe
 
AW: Dbox2 bleibt beim booten hängen

wenn dein flash log so aussieht hast du einen NETZWERK-FEHLER !!!

weil das -> boot net failed steht da nicht umsonst ;)

kann viele Ursachen haben ...

firewall aus gestellt ?
antiviren Prog deaktiviert ?
netzwerk geschwindigkeit auf 10 MBit Halfduplex gestellt ?
Nullmodem kabel angeschlossen ?
geschwindigkeit des COM port´s eingestellt ?

du siehst fragen über fragen ;)
 
Zurück
Oben