Hi, habe folgendes Problem, meine V14 Karte bekommt im Status im webif nur noch Error, von jetzt auf nacher. Oscam version r10656 .
V14 hängt in einem Smargo, den ich auch schon getauscht habe.
Aus log:
Oscam.config:
oscam.server
Habt ihr ne Idee woran es liegen könnte ?
V14 hängt in einem Smargo, den ich auch schon getauscht habe.
Aus log:
2015/10/19 18:45:53 140CA98 r (reader) v14 [smartreader] ATR: 3F 0A
2015/10/19 18:45:53 140CA98 r (reader) v14 [smartreader] Init card protocol T0, FI=1, F=372, D=1, N=0
2015/10/19 18:45:53 140CA98 r (reader) v14 [smartreader] Calculated work ETU is 69.66 us reader mhz = 534
2015/10/19 18:45:53 140CA98 r (reader) v14 [smartreader] Effective reader settings mhz =534 F= 372 D= 1 N=0 T=0 inv=1 parity=ODD
2015/10/19 18:45:54 140CA98 r (reader) v14 [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
2015/10/19 18:45:55 140CA98 r (reader) v14 [smartreader] card system not supported
2015/10/19 18:45:55 140CA98 r (reader) v14 [smartreader] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/10/19 18:45:55 140CA98 r (reader) v14 [smartreader] card initializing error
2015/10/19 18:45:53 140CA98 r (reader) v14 [smartreader] Init card protocol T0, FI=1, F=372, D=1, N=0
2015/10/19 18:45:53 140CA98 r (reader) v14 [smartreader] Calculated work ETU is 69.66 us reader mhz = 534
2015/10/19 18:45:53 140CA98 r (reader) v14 [smartreader] Effective reader settings mhz =534 F= 372 D= 1 N=0 T=0 inv=1 parity=ODD
2015/10/19 18:45:54 140CA98 r (reader) v14 [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
2015/10/19 18:45:55 140CA98 r (reader) v14 [smartreader] card system not supported
2015/10/19 18:45:55 140CA98 r (reader) v14 [smartreader] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/10/19 18:45:55 140CA98 r (reader) v14 [smartreader] card initializing error
Oscam.config:
oscam.server
[reader]
label = v14
description = V14-Sky
enable = 1
protocol = smartreader
device = Serial:Reader 68B49AC
#device = Serial:Reader 6FEA17A
services = sky_v14,v14hdplus
caid = 098C
boxid = 12345678
detect = cd
mhz = 1
cardmhz = 2700
ins7e11 = 15
ndsversion = 2
group = 4
fix07 = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-u = 1
saveemm-u = 1
saveemm-unknown = 1
label = v14
description = V14-Sky
enable = 1
protocol = smartreader
device = Serial:Reader 68B49AC
#device = Serial:Reader 6FEA17A
services = sky_v14,v14hdplus
caid = 098C
boxid = 12345678
detect = cd
mhz = 1
cardmhz = 2700
ins7e11 = 15
ndsversion = 2
group = 4
fix07 = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-u = 1
saveemm-u = 1
saveemm-unknown = 1
Habt ihr ne Idee woran es liegen könnte ?
Zuletzt bearbeitet von einem Moderator: