V13 gepairt?

bully12 · 5. März 2015

Hallo,

ich habe hier viel gelesen zum Thema Paring aber das meiste bezieht sich auf eine V14

Seit Jahren habe hatte ich eine S02 und als Zweitkarte eine V13.
Die S02 wurde nun zwangsumgetauscht gegen eine V14.
Seit dort geht aber auch meine V13 nicht mehr. Das Fusebyte wird unter den Entitlements mit 25 angezeigt (verlobt aber noch nicht gepaired).

Gibt es da noch Hoffnung oder muss ich die Karte tauschen?

cojo · 5. März 2015

AW: V13 gepairt?

ohne das https://www.digital-eliteboard.com/361741-wie-poste-ich-im-oscam-bereich-richtig.html keine Hilfe

bully12 · 5. März 2015

AW: V13 gepairt?

oscam.server

[reader]label = V13
protocol = mouse
device = /dev/ttyUSB1
autospeed = 0
caid = 09C4
boxid = 12345678
ins7e11 = 15
ecmwhitelist = 09C4:51,56,63,9B,A0,69,B3
detect = cd
mhz = 600
group = 2
emmcache = 1,1,10,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

Die Karte wird erkannt, 19 Entitements, gültig bis 02.05

Log vom Restart des Readers

2015/03/05 17:58:57 91315F0 h (webif) WebIf: Origin checked. Result: access from 192.168.178.10 => allowed
2015/03/05 17:58:57 9137FB8 r (reader) V13 [mouse] IO: Timeout in IO_Serial_WaitToRead, timeout=1000000 us
2015/03/05 17:58:57 9137FB8 r (reader) V13 [mouse] ATR: XX XX XX .......
2015/03/05 17:58:57 9137FB8 r (reader) V13 [mouse] TA1=15 TB1=25 TC1=03 TD1=10 (T0)
2015/03/05 17:58:57 9137FB8 r (reader) V13 [mouse] TA2=80 no TD2 means T0
2015/03/05 17:58:57 9137FB8 r (reader) V13 [mouse] 1 protocol types detected. Historical bytes: 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 15
2015/03/05 17:58:57 9137FB8 r (reader) V13 [mouse] Specific mode: T0, F=372, D=16, N=3
2015/03/05 17:58:57 9137FB8 r (reader) V13 [mouse] Init card protocol T0, FI=1, F=372, D=16, N=3
2015/03/05 17:58:57 9137FB8 r (reader) V13 [mouse] Setting baudrate to 153600 bps
2015/03/05 17:58:57 9137FB8 r (reader) V13 [mouse] IFD: Setting baudrate to 153600
2015/03/05 17:58:57 9137FB8 r (reader) V13 [mouse] IO: custom baudrate: cardmhz=357 mhz=600 custom_baud=258151 baud_base=24000000 divisor=93 -> effective baudrate 258064
2015/03/05 17:58:57 9137FB8 r (reader) V13 [mouse] IO: Getting readerstatus...
2015/03/05 17:58:57 9137FB8 r (reader) V13 [mouse] IO: Set reader ready to Send
2015/03/05 17:58:57 9137FB8 r (reader) V13 [mouse] Calculated work ETU is 3.88 us reader mhz = 600
2015/03/05 17:58:57 9137FB8 r (reader) V13 [mouse] Protocol: T=0, WWT=153600, Clockrate=6000000
2015/03/05 17:58:57 9137FB8 r (reader) V13 [mouse] Setting timings: timeout=153600 ETU, block_delay=0 ETU, char_delay=15 ETU
2015/03/05 17:58:57 9137FB8 r (reader) V13 [mouse] IFD: Setting right parity
2015/03/05 17:58:57 9137FB8 r (reader) V13 [mouse] IFD: Setting parity from Even to Odd
2015/03/05 17:58:57 9137FB8 r (reader) V13 [mouse] IO: Getting readerstatus...
2015/03/05 17:58:57 9137FB8 r (reader) V13 [mouse] IO: Set reader ready to Send
2015/03/05 17:58:57 9137FB8 r (reader) V13 [mouse] IO: Read timeout 75000 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/03/05 17:58:57 9137FB8 r (reader) V13 [mouse] IO: Timeout in IO_Serial_WaitToRead, timeout=75000 us
2015/03/05 17:58:57 9137FB8 r (reader) V13 [mouse] Buffers readed 0 bytes total time_us 75390
2015/03/05 17:58:57 9137FB8 r (reader) V13 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
2015/03/05 17:58:57 9137FB8 r (reader) V13 [mouse] IFD: Card succesfully activated
2015/03/05 17:58:59 9137FB8 r (reader) V13 [videoguard2] IFD: Transmit succesful
2015/03/05 17:58:59 9137FB8 r (reader) V13 [videoguard2] IFD: ICC_Async_InvertBuffer: size=5 buf[0]=74
2015/03/05 17:58:59 9137FB8 r (reader) V13 [videoguard2] IFD: Setting timeout to 153600 ETU (595200 us)
2015/03/05 17:58:59 9137FB8 r (reader) V13 [videoguard2] IFD: Receive size 1 bytes, delay 0 us, timeout=595200 us
2015/03/05 17:58:59 9137FB8 r (reader) V13 [videoguard2] IO: Read timeout 595200 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/03/05 17:58:59 9137FB8 r (reader) V13 [videoguard2] IO: Receiving:
2015/03/05 17:58:59 9137FB8 r (reader) F1
2015/03/05 17:58:59 9137FB8 r (reader) V13 [videoguard2] IFD: Receive succesful
2015/03/05 17:58:59 9137FB8 r (reader) V13 [videoguard2] IFD: ICC_Async_InvertBuffer: size=1 buf[0]=f1
2015/03/05 17:58:59 9137FB8 r (reader) V13 [videoguard2] IFD: Setting timeout to 153600 ETU (595200 us)
2015/03/05 17:58:59 9137FB8 r (reader) V13 [videoguard2] IFD: Receive size 38 bytes, delay 0 us, timeout=595200 us
2015/03/05 17:58:59 9137FB8 r (reader) V13 [videoguard2] IO: Read timeout 595200 us, read delay 0 us, to read 38 char(s), chunksize 38 char(s)
2015/03/05 17:58:59 9137FB8 r (reader) V13 [videoguard2] IO: Receiving:
2015/03/05 17:58:59 9137FB8 r (reader) 63 DB FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2015/03/05 17:58:59 9137FB8 r (reader) FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
2015/03/05 17:58:59 9137FB8 r (reader) FF FF FF FF FF 0F
2015/03/05 17:58:59 9137FB8 r (reader) V13 [videoguard2] IFD: Receive succesful
2015/03/05 17:58:59 9137FB8 r (reader) V13 [videoguard2] IFD: ICC_Async_InvertBuffer: size=38 buf[0]=63
2015/03/05 17:58:59 9137FB8 r (reader) V13 [videoguard2] IFD: Setting timeout to 153600 ETU (595200 us)
2015/03/05 17:58:59 9137FB8 r (reader) V13 [videoguard2] IFD: Receive size 1 bytes, delay 0 us, timeout=595200 us
2015/03/05 17:58:59 9137FB8 r (reader) V13 [videoguard2] IO: Read timeout 595200 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/03/05 17:58:59 9137FB8 r (reader) V13 [videoguard2] IO: Receiving:
2015/03/05 17:58:59 9137FB8 r (reader) F6
2015/03/05 17:58:59 9137FB8 r (reader) V13 [videoguard2] IFD: Receive succesful
2015/03/05 17:58:59 9137FB8 r (reader) V13 [videoguard2] IFD: ICC_Async_InvertBuffer: size=1 buf[0]=f6
2015/03/05 17:58:59 9137FB8 r (reader) V13 [videoguard2] TRACE: SW1: 90
2015/03/05 17:58:59 9137FB8 r (reader) V13 [videoguard2] IFD: Setting timeout to 153600 ETU (595200 us)
2015/03/05 17:58:59 9137FB8 r (reader) V13 [videoguard2] IFD: Receive size 1 bytes, delay 0 us, timeout=595200 us
2015/03/05 17:58:59 9137FB8 r (reader) V13 [videoguard2] IO: Read timeout 595200 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/03/05 17:58:59 9137FB8 r (reader) V13 [videoguard2] IO: Receiving:
2015/03/05 17:58:59 9137FB8 r (reader) FF
2015/03/05 17:58:59 9137FB8 r (reader) V13 [videoguard2] IFD: Receive succesful
2015/03/05 17:58:59 9137FB8 r (reader) V13 [videoguard2] IFD: ICC_Async_InvertBuffer: size=1 buf[0]=ff
2015/03/05 17:58:59 9137FB8 r (reader) V13 [videoguard2] TRACE: SW2: 00
2015/03/05 17:58:59 9137FB8 r (reader) V13 [videoguard2] Answer from cardreader:
2015/03/05 17:58:59 9137FB8 r (reader) 39 24 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2015/03/05 17:58:59 9137FB8 r (reader) 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2015/03/05 17:58:59 9137FB8 r (reader) 00 00 00 00 00 0F 90 00
2015/03/05 17:58:59 9137FB8 r (reader) V13 [videoguard2] ------------------------------------------------------from-ins70--
2015/03/05 17:58:59 91315F0 h (webif) WebIf: Origin checked. Result: access from 192.168.178.10 => allowed
2015/03/05 17:58:59 9137FB8 r (reader) V13 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/03/05 17:58:59 0 (work) start reader thread action 13
2015/03/05 17:58:59 9137FB8 r (work) data from add_job action=13 client r V13
2015/03/05 17:59:00 9137FB8 r (reader) V13 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/03/05 17:59:00 91315F0 h (webif) WebIf: Origin checked. Result: access from 192.168.178.10 => allowed
2015/03/05 17:59:00 0 (work) start reader thread action 13
2015/03/05 17:59:00 9137FB8 r (work) data from add_job action=13 client r V13
2015/03/05 17:59:01 9137FB8 r (reader) V13 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/03/05 17:59:01 0 (work) start reader thread action 13
2015/03/05 17:59:01 9137FB8 r (work) data from add_job action=13 client r V13
2015/03/05 17:59:01 91315F0 h (webif) WebIf: Origin checked. Result: access from 192.168.178.10 => allowed
2015/03/05 17:59:02 9137FB8 r (reader) V13 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/03/05 17:59:02 0 (work) start reader thread action 13

dodo83 · 5. März 2015

AW: V13 gepairt?

log bitte im Debug level auf 0
ab start der OScam bis zur Sender abfrage
Payload schon mal auch auslesen

bully12 · 5. März 2015

AW: V13 gepairt?

Log ab start der OScam bis zur Senderabfrage

2015/03/05 18:16:27 912F598 r (reader) V13 [mouse] Card type: P1TV
2015/03/05 18:16:27 912F598 r (reader) V13 [mouse] Rom version: 10A7
2015/03/05 18:16:27 912F598 r (reader) V13 [mouse] Unable to get smartcard credit
2015/03/05 18:16:27 912F598 r (reader) V13 [mouse] FuseByte: 25
2015/03/05 18:16:27 912F598 r (reader) V13 [mouse] Region Code: 00BO0102
2015/03/05 18:16:27 912F598 r (reader) V13 [mouse] Country Code: DEU
2015/03/05 18:16:27 912F598 r (reader) V13 [mouse] Pincode read: 29635
2015/03/05 18:16:27 912F598 r (reader) V13 [mouse] PCB settings: FF FF FF FF
2015/03/05 18:16:27 912F598 r (reader) V13 [mouse] type: VideoGuard Sky Austria/Germany (09C4) FastMode, caid: 09C4
2015/03/05 18:16:27 912F598 r (reader) V13 [mouse] serial: ########, BoxID: ########, baseyear: 2004
2015/03/05 18:16:27 912F598 r (reader) V13 [mouse] ready for requests
2015/03/05 18:16:27 912F598 r (reader) V13 [mouse] found card system videoguard2
2015/03/05 18:16:27 912F598 r (reader) V13 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/03/05 18:16:27 912F598 r (reader) V13 [videoguard2] card detected
2015/03/05 18:16:27 912F598 r (reader) V13 [videoguard2] type: VideoGuard Sky Austria/Germany (09C4) FastMode
2015/03/05 18:16:27 912F598 r (reader) V13 [videoguard2] ------------------------------------------------------------------
2015/03/05 18:16:27 912F598 r (reader) V13 [videoguard2] |- class -|-- tier --|----- valid to ------|--- package name ----|
2015/03/05 18:16:27 912F598 r (reader) V13 [videoguard2] +---------+----------+---------------------+---------------------+
2015/03/05 18:16:27 912F598 r (reader) V13 [videoguard2] |-- 00 ---|-- 0058 --| 2015/05/02-01:00:00 |
2015/03/05 18:16:27 912F598 r (reader) V13 [videoguard2] |-- 00 ---|-- 005a --| 2015/05/02-01:00:00 |
2015/03/05 18:16:27 912F598 r (reader) V13 [videoguard2] |-- 00 ---|-- 0056 --| 2015/05/02-01:00:00 |
2015/03/05 18:16:27 912F598 r (reader) V13 [videoguard2] |-- 00 ---|-- 0057 --| 2015/05/02-01:00:00 |
2015/03/05 18:16:27 912F598 r (reader) V13 [videoguard2] |-- 00 ---|-- 007b --| 2015/05/02-01:00:00 |
2015/03/05 18:16:27 912F598 r (reader) V13 [videoguard2] |-- 00 ---|-- 007d --| 2015/05/02-01:00:00 |
2015/03/05 18:16:27 912F598 r (reader) V13 [videoguard2] |-- 00 ---|-- 0081 --| 2015/05/02-01:00:00 |
2015/03/05 18:16:27 912F598 r (reader) V13 [videoguard2] |-- 00 ---|-- 008e --| 2015/05/02-01:00:00 |
2015/03/05 18:16:27 912F598 r (reader) V13 [videoguard2] |-- 00 ---|-- 00c0 --| 2015/05/02-01:00:00 |
2015/03/05 18:16:27 912F598 r (reader) V13 [videoguard2] |-- 00 ---|-- 00c8 --| 2015/05/02-01:00:00 |
2015/03/05 18:16:27 912F598 r (reader) V13 [videoguard2] |-- 00 ---|-- 00c9 --| 2015/05/02-01:00:00 |
2015/03/05 18:16:27 912F598 r (reader) V13 [videoguard2] |-- 00 ---|-- 00ca --| 2015/05/02-01:00:00 |
2015/03/05 18:16:27 912F598 r (reader) V13 [videoguard2] |-- 00 ---|-- 00cb --| 2015/05/02-01:00:00 |
2015/03/05 18:16:27 912F598 r (reader) V13 [videoguard2] |-- 00 ---|-- 00c7 --| 2015/05/02-01:00:00 |
2015/03/05 18:16:27 912F598 r (reader) V13 [videoguard2] |-- 00 ---|-- 00d4 --| 2015/05/02-01:00:00 |
2015/03/05 18:16:27 912F598 r (reader) V13 [videoguard2] |-- 00 ---|-- 00f0 --| 2015/05/02-01:00:00 |
2015/03/05 18:16:27 912F598 r (reader) V13 [videoguard2] |-- 00 ---|-- 00fa --| 2015/05/02-01:00:00 |
2015/03/05 18:16:27 912F598 r (reader) V13 [videoguard2] |-- 00 ---|-- 00f3 --| 2015/05/02-01:00:00 |
2015/03/05 18:16:27 912F598 r (reader) V13 [videoguard2] |-- 00 ---|-- 00ff --| 2015/05/02-01:00:00 |
2015/03/05 18:16:27 912F598 r (reader) V13 [videoguard2] ------------------------------------------------------from-ins70--
2015/03/05 18:17:15 912F040 h (webif) all debug_level=65535
2015/03/05 18:17:15 912F040 h (webif) WebIf: Origin checked. Result: access from 192.168.178.10 => allowed
2015/03/05 18:17:16 912F598 r (reader) V13 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/03/05 18:17:16 0 (work) start reader thread action 13
2015/03/05 18:17:16 912F598 r (work) data from add_job action=13 client r V13
2015/03/05 18:17:16 912F040 h (webif) WebIf: Origin checked. Result: access from 192.168.178.10 => allowed
2015/03/05 18:17:17 912F598 r (reader) V13 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/03/05 18:17:17 0 (work) start reader thread action 13
2015/03/05 18:17:17 912F598 r (work) data from add_job action=13 client r V13
2015/03/05 18:17:17 912F040 h (webif) WebIf: Origin checked. Result: access from 192.168.178.10 => allowed
2015/03/05 18:17:18 912F598 r (reader) V13 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/03/05 18:17:18 0 (work) start reader thread action 13
2015/03/05 18:17:18 912F598 r (work) data from add_job action=13 client r V13
2015/03/05 18:17:18 912F040 h (webif) WebIf: Origin checked. Result: access from 192.168.178.10 => allowed
2015/03/05 18:17:19 912F598 r (reader) V13 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/03/05 18:17:19 0 (work) start reader thread action 13
2015/03/05 18:17:19 912F598 r (work) data from add_job action=13 client r V13
2015/03/05 18:17:19 912F040 h (webif) all debug_level=0
2015/03/05 18:21:58 9133E18 c (client) encrypted cccam-client 192.168.178.10 granted (GerhardDVBViewer, au=off)
2015/03/05 18:22:04 912F598 r (reader) V13 [videoguard2] classD3 ins54: no cw --> Card needs pairing/extra data
2015/03/05 18:22:04 9133E18 c (ecm) xxxxxxxxxxxx (09C4&000000/0641/EF10/B3:FDA46342B0CF1994A8DAEB6452A9DD24): not found (154 ms) by V13
2015/03/05 18:22:05 9133E18 c (ecm) xxxxxxxxxxxx (09C4&000000/0641/EF10/B3:FDA46342B0CF1994A8DAEB6452A9DD24): not found (0 ms) by V13

dodo83 · 5. März 2015

AW: V13 gepairt?

jetzt auf Debug level 2+4 stellen
auf einen Sky Sender schalten und nach Decrypted payload suchen

bully12 · 5. März 2015

AW: V13 gepairt?

Decrypted payload

2015/03/05 18:34:42 912F0D0 r (reader) V13 [videoguard2] Decrypted payload
2015/03/05 18:34:42 912F0D0 r (reader) 00 00 00 00 00 00 00 00 00 00 00 00 FF 00 22 02
2015/03/05 18:34:42 912F0D0 r (reader) 00 80 0E 02 00 00 0F 04 00 10 00 00 20 04 00 00
2015/03/05 18:34:42 912F0D0 r (reader) 00 00 25 11 00 00 00 00 00 00 00 00 00 00 00 00
2015/03/05 18:34:42 912F0D0 r (reader) 00 00 00 00 00 2A 04 00 00 00 00 55 01 00 56 08
2015/03/05 18:34:42 912F0D0 r (reader) 00 00 00 00 00 00 00 00
2015/03/05 18:34:42 912F0D0 r (reader) V13 [videoguard2] classD3 ins54: no cw --> Card needs pairing/extra data
2015/03/05 18:34:42 912F0D0 r (reader) V13 [videoguard2] cardreader_do_ecm: after csystem->do_ecm rc=0
2015/03/05 18:34:42 912F0D0 r (reader) V13 [videoguard2] cardreader_do_ecm: ret rc=0
2015/03/05 18:34:42 912F0D0 r (reader) V13 [videoguard2] cardreader_process_ecm: cardreader_do_ecm returned rc=0 (ERROR=0)
2015/03/05 18:34:42 912F0D0 r (reader) V13 [videoguard2] Error processing ecm for caid 09C4, srvid 0083, servicename: 09C4:0083 unknown
2015/03/05 18:34:42 91359C0 c (ecm) test (09C4&000000/025B/0083/B3:C66E2013F582B6CDCC140011B78C02D0): not found (124 ms) by V13

pehedima · 5. März 2015

AW: V13 gepairt?

Karte ist gepaired.

Gesendet von meiner Handquetsche

bully12 · 5. März 2015

AW: V13 gepairt?

woran erkennst du das? daran?

2015/03/05 18:34:42 912F0D0 r (reader) V13 [videoguard2] classD3 ins54: no cw --> Card needs pairing/extra data

pehedima · 5. März 2015

AW: V13 gepairt?

An 0F0401000 im Payload.

Gesendet von meiner Handquetsche

bully12 · 7. März 2015

AW: V13 gepairt?

ok Karte ist gepairt, versuche sie umzutauschen.
Was aber für mich merkwürdig ist, ich habe drei original Pase Sky-Reseiver und in allen drei geht die Karte.
Wird die Karte nicht mit einen bestimmten Reseiver gepairt?

pehedima · 7. März 2015

AW: V13 gepairt?

Eine Karte kann auch mit mehreren Receivern gepaired werden.

bully12 · 7. März 2015

AW: V13 gepairt?

wenn ich dann eine neue Karte habe dann muss ich den EMM Log nach allen drei Seriennummern durchsuchen?

bombadil · 7. März 2015

AW: V13 gepairt?

Nein, du brauchst nur die 07 mit dem 0531 zu filtern und diese nicht schreiben.

Grüße
Bombadil

Tapa-Talking by Eifön

tommysweet100 · 7. März 2015

AW: V13 gepairt?

Du meinst sicherlich Boxserial.
Dein Beitrag ist für mich sehr interessant auch wegen unserer V13er Sammelliste.
Als Doppelabobesitzer sind bei mir beide BOXSERIAL in beiden Karten in den Aktivier EMMs zu finden.
Macht auch Sinn. Somit währen die beiden Orginalreceiver untereinander austauschbar wenn ich diese benutzen würde.
Bei 3 Boxen würde dies bedeuten das die Boxserial garnicht komplett benutzt wird somit war ich die ganze Zeit falsch mit meiner
Meinung.

V13 gepairt?

bully12

Freak

cojo

bully12

Freak

dodo83

bully12

Freak

dodo83

bully12

Freak

pehedima

bully12

Freak

pehedima

bully12

Freak

pehedima

bully12

Freak

bombadil

tommysweet100

Hacker

Ähnliche Themen

V13 gepairt?

Freak

Freak

Freak

Freak

Freak

Freak

Freak

Hacker

Ähnliche Themen

Datenschutz & Transparenz

Datenschutz & Transparenz