Dies ist eine mobil optimierte Seite, die schnell lädt. Wenn Sie die Seite ohne Optimierung laden möchten, dann klicken Sie auf diesen Text.

Stimmt die einstellung

    Nobody is reading this thread right now.
AW: Stimmt die einstellung

Beim Austausch der Binary werden die Konfigs nicht angerührt. Es kann aber sein dass sich Parameter, oder einige Einstellungen derer sich verändert haben. Das kann über das Web Interface leicht angepasst werden.

Die 2. Frage habe ich nicht verstanden.

Grüße
Bombadil
 
AW: Stimmt die einstellung

sorry bombadil ich meinte was ich einschalten muss,das ich den clientzugriff sehe und posten kann
 
AW: Stimmt die einstellung

Ok,

einschalten kannst du das nur mit einem funktionierendem account in der oscam.user und beim Client den dazugehörendem Reader/C-Line. Dazu muss der auch auf einen Sender schalten, den deine Karte entschlüsseln soll.

Im Spoiler Post #30 ist ein Client verbunden.

Grüße
Bombadil
 
AW: Stimmt die einstellung

Hallo bombadil
habe jetzt probiert meinen Igel einzurichten.Hoffe es stimmt alles soweit das ich über einen client meine v14 freischalten kann.
log ist
Sie müssen registriert sein, um Links zu sehen.





  • 2015/02/01 09:15:32 0 --- Skipped 1 duplicated log lines ---
  • 2015/02/01 09:17:08 0 --- Skipped 1 duplicated log lines ---
  • 2015/02/01 09:25:38 0 --- Skipped 1 duplicated log lines ---
  • 2015/02/01 09:25:38 1197C48 h Stopping log...
  • 2015/02/01 09:25:38 1197C48 h >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r9969 (arm-linux-gnueabihf)
  • 2015/02/01 09:25:38 1197C48 h Refresh Server requested by WebIF from 192.168.178.24
  • 2015/02/01 09:31:38 1197C48 h Stopping log...
  • 2015/02/01 09:31:38 1197C48 h >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r9969 (arm-linux-gnueabihf)
  • 2015/02/01 09:31:38 1197C48 h Refresh Server requested by WebIF from 192.168.178.24
  • 2015/02/01 09:47:08 11A4CA8 r skyv14 [videoguard2] card ejected
  • 2015/02/01 09:47:09 11A4CA8 r skyv14 [mouse] card detected
  • 2015/02/01 09:47:10 11A4CA8 r skyv14 [mouse] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
  • 2015/02/01 09:47:10 11A4CA8 r skyv14 [mouse] Init card protocol T0, FI=1, F=372, D=16, N=2
  • 2015/02/01 09:47:10 11A4CA8 r skyv14 [mouse] Setting baudrate to 153600 bps
  • 2015/02/01 09:47:11 11A4CA8 r skyv14 [mouse] Calculated work ETU is 6.51 us reader mhz = 357
  • 2015/02/01 09:47:11 11A4CA8 r skyv14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
  • 2015/02/01 09:47:18 11A4CA8 r skyv14 [mouse] card system not supported
  • 2015/02/01 09:47:18 11A4CA8 r skyv14 [mouse] Normal mode failed, reverting to Deprecated Mode
  • 2015/02/01 09:47:19 11A4CA8 r skyv14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
  • 2015/02/01 09:47:19 11A4CA8 r skyv14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
  • 2015/02/01 09:47:19 11A4CA8 r skyv14 [mouse] Calculated work ETU is 104.20 us reader mhz = 357
  • 2015/02/01 09:47:19 11A4CA8 r skyv14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
  • 2015/02/01 09:47:50 11A4CA8 r skyv14 [mouse] card system not supported
  • 2015/02/01 09:47:50 11A4CA8 r skyv14 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
  • 2015/02/01 09:47:50 11A4CA8 r skyv14 [mouse] card initializing error
  • 2015/02/01 09:47:52 11A4CA8 r skyv14 [mouse] card detected
  • 2015/02/01 09:47:54 11A4CA8 r skyv14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
  • 2015/02/01 09:47:54 11A4CA8 r skyv14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
  • 2015/02/01 09:47:54 11A4CA8 r skyv14 [mouse] Setting baudrate to 38400 bps
  • 2015/02/01 09:47:54 11A4CA8 r skyv14 [mouse] Calculated work ETU is 26.05 us reader mhz = 357
  • 2015/02/01 09:47:54 11A4CA8 r skyv14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
  • 2015/02/01 09:48:15 11A4CA8 r skyv14 [mouse] card system not supported
  • 2015/02/01 09:48:15 11A4CA8 r skyv14 [mouse] Normal mode failed, reverting to Deprecated Mode
  • 2015/02/01 09:48:16 11A4CA8 r skyv14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
  • 2015/02/01 09:48:16 11A4CA8 r skyv14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
  • 2015/02/01 09:48:16 11A4CA8 r skyv14 [mouse] Calculated work ETU is 104.20 us reader mhz = 357
  • 2015/02/01 09:48:16 11A4CA8 r skyv14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
  • 2015/02/01 09:48:37 11A4CA8 r skyv14 [mouse] card system not supported
  • 2015/02/01 09:48:37 11A4CA8 r skyv14 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
  • 2015/02/01 09:48:37 11A4CA8 r skyv14 [mouse] card initializing error
  • 2015/02/01 09:49:56 11A4CA8 r skyv14 [mouse] card detected
  • 2015/02/01 09:49:58 11A4CA8 r skyv14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
  • 2015/02/01 09:49:58 11A4CA8 r skyv14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
  • 2015/02/01 09:49:58 11A4CA8 r skyv14 [mouse] Setting baudrate to 38400 bps
  • 2015/02/01 09:49:58 11A4CA8 r skyv14 [mouse] Calculated work ETU is 26.05 us reader mhz = 357
  • 2015/02/01 09:49:58 11A4CA8 r skyv14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
  • 2015/02/01 09:50:19 11A4CA8 r skyv14 [mouse] card system not supported
  • 2015/02/01 09:50:19 11A4CA8 r skyv14 [mouse] Normal mode failed, reverting to Deprecated Mode
  • 2015/02/01 09:50:20 11A4CA8 r skyv14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
  • 2015/02/01 09:50:20 11A4CA8 r skyv14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
  • 2015/02/01 09:50:20 11A4CA8 r skyv14 [mouse] Calculated work ETU is 104.20 us reader mhz = 357
  • 2015/02/01 09:50:20 11A4CA8 r skyv14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
  • 2015/02/01 09:50:41 11A4CA8 r skyv14 [mouse] card system not supported
  • 2015/02/01 09:50:41 11A4CA8 r skyv14 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
  • 2015/02/01 09:50:41 11A4CA8 r skyv14 [mouse] card initializing error
config user
# oscam.user generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r9969
# Read more:
Sie müssen registriert sein, um Links zu sehen.


[account]
user = andreas
pwd = xxxx
caid = 098C,1830
uniq = 3
group = 1,2,3,4
cccmaxhops = 1

[account]
user = heimo1
pwd = xxxx
caid = 098C,1830
uniq = 3
group = 1,2,3,4
cccmaxhops = 1

[account]
user = kaisy
pwd = xxxx
caid = 098C,1830
uniq = 3
group = 1,2,3,4
cccmaxhops = 1

[account]
user = audrey
pwd = xxxx
caid = 098C,1830
uniq = 3
au = skyv14
group = 1,2,3,4
cccmaxhops = 1

[account]
user = kirseb
pwd = xxxx
caid = 098C,1830
uniq = 3
group = 1,2,3,4
cccmaxhops = 1
cccreshare = 1

[account]
user = anita
pwd = xxxx
caid = 098C,1830
uniq = 3
group = 1,2,3,4
cccmaxhops = 1

[account]
user = andy
pwd = xxxx
caid = 098C,1830
uniq = 3
group = 1,2,3,4
cccmaxhops = 1

[account]
user = heimo2
pwd = xxx
caid = 098C,1830
uniq = 3
au = skyv14
group = 1,2,3,4
cccmaxhops = 1

config oscam
[global]
serverip = 192.xxxxxxxx
logfile = /var/log/ipc/OScam.log
netprio = 1
nice = -1
maxlogsize = 2480
preferlocalcards = 1
emmlogdir = /var/etc
resolvegethostbyname = 1
failbantime = 15
failbancount = 5

[cache]

[newcamd]
port = xxxx@1830:003411
key = 0102030405060708091011121314

[cccam]
port = xxxxx
nodeid = 23C50EE710B514D6
version = 2.0.11
reshare = 1
reshare_mode = 0

[webif]
httpport = xxxx
httpuser = oscam
httppwd = xxxx
httprefresh = 15
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255

oscam server
# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r9969
# Read more:
Sie müssen registriert sein, um Links zu sehen.


[reader]
label = HD+
enable = 0
protocol = mouse
device = /dev/ttyUSB8
detect = cd
group = 1
emmcache = 1,3,2

[reader]
label = camd3emu
enable = 0
protocol = cs357x
device = 127.0.0.1,20248
user = meinserver
password = meinserverpass
group = 1

[reader]
label = OSEmu
enable = 0
protocol = cs357x
device = 127.0.0.1,54321
user = emu
password = emu
caid = 0D00,0D02,0D03,0D05,090F
ecmwhitelist = 0D00:9C,84,87,8B,BF,C3,6D;0D02:84;0D03:9C,9F,A5;0D05:9C;090F:62,73,84,94,95,96,99,A6,B7
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000CC;0D02:00008C,0000A0,0000A4,0000A8;0D03:000004,000008,000024,000028;0D05:000004,000010;090F:000000
group = 1

[reader]
label = skyv14
protocol = mouse
device = /dev/ttyUSB0
caid = 098C,1830
boxid = 12345678
ins7e11 = 15
detect = cd
group = 1
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2
 
AW: Stimmt die einstellung

Deine Karte wird nicht korrekt gelesen.

Beim reader mal folgendes setzen:

Code: 
ins7e11 = 13

und die V14 hat nur die CAID 098C, daher 1830 dort löschen:

Code: 
caid                          = 098C


Wie ist die easymouse eingestellt?

Ganze Box neu starten und oscam.log vom oscam start an posten.

Wenn das auch nicht läuft mal die Easy auf 6Mhz umstellen und im V14 reader mhz = 600 einfügen. Kiste neu starten
 
AW: Stimmt die einstellung

hi
die Karte wird nicht eingelesen
  • 2015/02/01 09:50:41 11A4CA8 r skyv14 [mouse] card initializing error
Zum Vergrößern anklicken....
wozu ist die Caid 1830 im Reader der v14 drin? ist eher unnötig
wie ist der Reader in dem die Karte steckt eingestellt?
 
AW: Stimmt die einstellung

easymouse einstellung ist unten unten unten oben
das ist nach dem oscam neugestartet wurde
2015/02/01 14:31:23 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9969 (arm-linux-gnueabihf)
2015/02/01 14:31:23 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 1816
2015/02/01 14:31:23 0 s userdb reloaded: 8 accounts loaded, 0 expired, 0 disabled
2015/02/01 14:31:23 0 s signal handling initialized
2015/02/01 14:31:23 0 s newcamd: initialized (fd=5, port=xxxxx, ip=192.xxxxxxxxx, prio=1)
2015/02/01 14:31:23 0 s -> CAID: 1830 PROVID: 003411
2015/02/01 14:31:23 0 s cccam: initialized (fd=6, port=37461, ip=192.xxxxxxxx, prio=1)
2015/02/01 14:31:23 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/02/01 14:31:23 0 s waiting for local card init
2015/02/01 14:31:23 1197C48 h webif: decompressed 150431 bytes back into 367624 bytes
2015/02/01 14:31:23 1197C48 h HTTP Server running. ip=192.xxxxxx port=xxxxxx
2015/02/01 14:31:24 0 s init for all local cards done
2015/02/01 14:31:24 0 s anti cascading disabled
 
AW: Stimmt die einstellung

Hi,

jetzt must du noch die Karte in die Maus schieben. Nix zu sehen.

Grüße
Bombadil
 
AW: Stimmt die einstellung

das ist jetzt vom reader
2015/02/01 15:20:33 1197C48 h skyv14 [mouse] Restarting reader
2015/02/01 15:20:33 1197C48 h skyv14 [mouse] creating thread for device /dev/ttyUSB0
2015/02/01 15:20:33 11B51A8 r skyv14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2015/02/01 15:20:34 11B51A8 r skyv14 [mouse] card detected
2015/02/01 15:20:35 11B51A8 r skyv14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/02/01 15:20:35 11B51A8 r skyv14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/02/01 15:20:35 11B51A8 r skyv14 [mouse] Setting baudrate to 38400 bps
2015/02/01 15:20:35 11B51A8 r skyv14 [mouse] Calculated work ETU is 26.05 us reader mhz = 357
2015/02/01 15:20:35 11B51A8 r skyv14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2015/02/01 15:20:37 11B51A8 r skyv14 [mouse] card system not supported
2015/02/01 15:20:37 11B51A8 r skyv14 [mouse] Normal mode failed, reverting to Deprecated Mode
2015/02/01 15:20:39 11B51A8 r skyv14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/02/01 15:20:39 11B51A8 r skyv14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/02/01 15:20:39 11B51A8 r skyv14 [mouse] Calculated work ETU is 104.20 us reader mhz = 357
2015/02/01 15:20:39 11B51A8 r skyv14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2015/02/01 15:20:43 11B51A8 r skyv14 [mouse] card system not supported
2015/02/01 15:20:43 11B51A8 r skyv14 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/02/01 15:20:43 11B51A8 r skyv14 [mouse] card initializing error
 
AW: Stimmt die einstellung

Hi,

wie ist jetzt die Maus eingestellt?

Grüße
 
AW: Stimmt die einstellung

unten unten unten oben
 
AW: Stimmt die einstellung

hallo,soll ich bei der easymouse mal die einstellung unten unten oben oben ,und beim
reader 600mhz und cardmhz=368 probieren, ob sie dann läuft?
 
AW: Stimmt die einstellung

Auf jeden Fall.
Probiere die entsprechenden Einstellungen durch.

Achte bei solchen Änderungen immer darauf, das der gesamte Server neu gestartet werden muss, nicht nur oscam.

Wenn du das logfile nicht selbst auswerten kannst, dann solltest du das hier posten (immer von oscam start an) und den entsprechenden Testfall dazuschreiben.
 
AW: Stimmt die einstellung

Hallo pehedima

hoffe jetzt ist in ordnung.
2015/02/02 15:09:12 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9969 (arm-linux-gnueabihf)
2015/02/02 15:09:12 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 2345
2015/02/02 15:09:12 0 s userdb reloaded: 8 accounts loaded, 0 expired, 0 disabled
2015/02/02 15:09:12 0 s signal handling initialized
2015/02/02 15:09:12 0 s newcamd: initialized (fd=5, port=22000, ip=192., prio=1)
2015/02/02 15:09:12 0 s -> CAID: 1830 PROVID: 003411
2015/02/02 15:09:12 0 s cccam: initialized (fd=6, port=3, ip=192.168, prio=1)
2015/02/02 15:09:12 0 s skyv14 [mouse] creating thread for device /dev/ttyUSB0
2015/02/02 15:09:12 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/02/02 15:09:12 0 s waiting for local card init
2015/02/02 15:09:12 A69A60 h webif: decompressed 150431 bytes back into 367624 bytes
2015/02/02 15:09:12 A69A60 h HTTP Server running. ip=192.168.xxxxxx port=xxxxxx
2015/02/02 15:09:12 A51C48 r skyv14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2015/02/02 15:09:13 A51C48 r skyv14 [mouse] card detected
2015/02/02 15:09:17 A51C48 r skyv14 [mouse] Error activating card.
2015/02/02 15:09:25 0 --- Skipped 2 duplicated log lines ---
2015/02/02 15:09:25 A51C48 r skyv14 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/02/02 15:09:25 A51C48 r skyv14 [mouse] card initializing error
2015/02/02 15:09:26 0 s init for all local cards done
2015/02/02 15:09:26 0 s anti cascading disabled
2015/02/02 15:17:56 A69A60 h skyv14 [mouse] Restarting reader
2015/02/02 15:17:56 A69A60 h skyv14 [mouse] creating thread for device /dev/ttyUSB0
2015/02/02 15:17:56 A51C48 r skyv14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=358)
2015/02/02 15:17:57 A51C48 r skyv14 [mouse] card detected
2015/02/02 15:17:58 A51C48 r skyv14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/02/02 15:17:58 A51C48 r skyv14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/02/02 15:17:58 A51C48 r skyv14 [mouse] Setting baudrate to 38400 bps
2015/02/02 15:17:58 A51C48 r skyv14 [mouse] Calculated work ETU is 15.50 us reader mhz = 600
2015/02/02 15:17:58 A51C48 r skyv14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
2015/02/02 15:17:59 A51C48 r skyv14 [mouse] Card type: P1TV
2015/02/02 15:17:59 A51C48 r skyv14 [mouse] Rom version: 20AA
2015/02/02 15:17:59 A51C48 r skyv14 [mouse] Credit available on card: 0 euro
2015/02/02 15:18:00 A51C48 r skyv14 [mouse] Extended 4C detected
2015/02/02 15:18:00 A51C48 r skyv14 [mouse] FuseByte: 00
2015/02/02 15:18:00 A51C48 r skyv14 [mouse] Region Code:
2015/02/02 15:18:00 A51C48 r skyv14 [mouse] Country Code: DEU
2015/02/02 15:18:00 A51C48 r skyv14 [mouse] Pincode read: 4718
2015/02/02 15:18:00 A51C48 r skyv14 [mouse] PCB settings: FF FF FF FF
2015/02/02 15:18:00 A51C48 r skyv14 [mouse] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2015/02/02 15:18:00 A51C48 r skyv14 [mouse] serial: ########, BoxID: ########, baseyear: 2004
2015/02/02 15:18:00 A51C48 r skyv14 [mouse] ready for requests
2015/02/02 15:18:00 A51C48 r skyv14 [mouse] found card system videoguard2
2015/02/02 15:18:00 A51C48 r skyv14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/02/02 15:18:00 A51C48 r skyv14 [videoguard2] card detected
2015/02/02 15:18:00 A51C48 r skyv14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
 
AW: Stimmt die einstellung

Welcher Client/Receiver soll die Freischaltung durchführen?

Im log ist von einem Client nichts zu sehen.


Gesendet von meiner Handquetsche
 
Du musst dich einloggen oder registrieren, um hier zu antworten.

Ähnliche Themen

ist einer aus schweiz hier und kann mal eine schweizer karte testen ?
Antworten
2
Aufrufe
210
DarkStarXxX
D
P
AU C8 ORF Karte 0648 funktioniert nicht mehr
2
Antworten
27
Aufrufe
875
Kind regards
5
vdr dvbapi oscam
2
Antworten
21
Aufrufe
441
cinfo
C
gelöst [gelöst] ORF und HD+ - globale EMMs
Antworten
8
Aufrufe
594
ultrasmd77
U
A
Aussetzer bei Oscam Client mit V23 Karte
2
Antworten
23
Aufrufe
883
DarkStarXxX
D
Menü
Anmelden
Registrieren
Für die Nutzung dieser Website sind Cookies erforderlich. Du musst diese akzeptieren, um die Website weiter nutzen zu können. Erfahre mehr…