Dies ist eine mobil optimierte Seite, die schnell lädt. Wenn Sie die Seite ohne Optimierung laden möchten, dann klicken Sie auf diesen Text.

Sky V14 Config Einrichtung

AW: Sky V14 Config Einrichtung

@eule: Du hast mittlerweile diverse Tipps von 3 verschiedenen Usern erhalten, als Feedback gibst du nun "ist immer noch auf error...". Damit kann keiner etwas anfangen, da keiner weiß was du davon mit welchem genauen Ergebnis versucht hast umzusetzen. Hier sind leider auch keine Hellseher unterwegs...

-supraracer
 
AW: Sky V14 Config Einrichtung

ich glaube das die karte immer noch auf error steht
 
AW: Sky V14 Config Einrichtung

hallo sorry für die schlechte antwort...

also hab die änderung eingetragen .... sieht so aus
[reader]label = v14
protocol = internal
device = /dev/sci1
autospeed = 1
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = CD
mhz = 450
cardmhz = 2700
group = 1
ecmwhitelist = 098C:98,9B,97,57,91
emmcache = 1,3,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

hier die log datei....
-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sun Aug 17 11:48:32 2014
-------------------------------------------------------------------------------
2014/08/17 11:48:32 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9822 (mipsel-unknown-linux-gnu-ssl-libusb-pcsc)
2014/08/17 11:48:32 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 11872
2014/08/17 11:48:32 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/08/17 11:48:32 0 s signal handling initialized
2014/08/17 11:48:32 0 s cccam: initialized (fd=5, port=13256)
2014/08/17 11:48:32 0 s v14 [internal] creating thread for device /dev/sci1
2014/08/17 11:48:32 0 s hdplus [internal] creating thread for device /dev/sci0
2014/08/17 11:48:32 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/08/17 11:48:32 0 s waiting for local card init
2014/08/17 11:48:32 B5F678 r v14 [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz
2014/08/17 11:48:32 B614A8 r hdplus [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=3.57 MHz
2014/08/17 11:48:32 B614A8 r hdplus [internal] card detected
2014/08/17 11:48:32 B5F678 r v14 [internal] card detected
2014/08/17 11:48:32 B54B40 h webif: decompressed 154648 bytes back into 365608 bytes
2014/08/17 11:48:32 B54B40 h HTTP Server running. ip=0.0.0.0 port=25000
2014/08/17 11:48:34 B614A8 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2014/08/17 11:48:34 B614A8 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/08/17 11:48:34 B614A8 r hdplus [internal] TEST tempo mhz check = 500 mhz
2014/08/17 11:48:34 B614A8 r hdplus [internal] Calculated work ETU is 5.93 us reader mhz = 540
2014/08/17 11:48:34 B614A8 r hdplus [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
2014/08/17 11:48:34 B614A8 r hdplus [internal] Card responded ok for ifsd request of 251
2014/08/17 11:48:35 B614A8 r hdplus [internal] detect native nagra card
2014/08/17 11:48:36 B614A8 r hdplus [internal] found card system nagra
2014/08/17 11:48:36 B614A8 r hdplus [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/08/17 11:48:36 B614A8 r hdplus [nagra] ROM: D N A S P 1 4 2
2014/08/17 11:48:36 B614A8 r hdplus [nagra] REV: R e v G C 6
2014/08/17 11:48:36 B614A8 r hdplus [nagra] SER: ############
2014/08/17 11:48:36 B614A8 r hdplus [nagra] CAID: 1830
2014/08/17 11:48:36 B614A8 r hdplus [nagra] Prv.ID: 00 00 34 11 (sysid)
2014/08/17 11:48:36 B614A8 r hdplus [nagra] Prv.ID: 00 00 00 00
2014/08/17 11:48:36 B614A8 r hdplus [nagra] IRD ID: ############
2014/08/17 11:48:36 B614A8 r hdplus [nagra] active to: 2014/10/07 12:59
2014/08/17 11:48:36 B614A8 r hdplus [nagra] -----------------------------------------
2014/08/17 11:48:36 B614A8 r hdplus [nagra] |id |tier |valid from |valid to |
2014/08/17 11:48:36 B614A8 r hdplus [nagra] +----+--------+------------+------------+
2014/08/17 11:48:36 B614A8 r hdplus [nagra] |8011|0064 |2010/02/01 |2011/02/02 |
2014/08/17 11:48:36 B614A8 r hdplus [nagra] |8011|0065 |1992/01/01 |1993/01/01 |
2014/08/17 11:48:36 B614A8 r hdplus [nagra] |8011|0BEA |2011/01/25 |2015/03/15 |
2014/08/17 11:48:36 B614A8 r hdplus [nagra] -----------------------------------------
2014/08/17 11:48:36 B614A8 r hdplus [nagra] ready for requests
2014/08/17 11:48:41 B5F678 r v14 [internal] Error activating card.
2014/08/17 11:48:59 0 --- Skipped 2 duplicated log lines ---
2014/08/17 11:48:59 B5F678 r v14 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/08/17 11:48:59 B5F678 r v14 [internal] card initializing error
2014/08/17 11:49:00 0 s init for all local cards done
2014/08/17 11:49:00 0 s anti cascading disabled
2014/08/17 11:49:00 76A00720 c plain dvbapi-client granted (local, au=on (1 reader))
2014/08/17 11:49:00 76A00720 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2014/08/17 11:49:02 76A00720 c [ADD PID 0] CAID: 1833 ECM_PID: 180F PROVID: 000000
2014/08/17 11:49:02 76A00720 c [ADD PID 1] CAID: 09C4 ECM_PID: 1B0F PROVID: 000000
2014/08/17 11:49:02 76A00720 c [ADD PID 2] CAID: 09AF ECM_PID: 1F0F PROVID: 000000
2014/08/17 11:49:02 76A00720 c [ADD PID 3] CAID: 098C ECM_PID: 1A0F PROVID: 000000
2014/08/17 11:49:02 76A00720 c Found 4 ECMpids and 3 STREAMpids in PMT
2014/08/17 11:49:02 76A00720 c [DVBAPI] Receiver wants to demux srvid 006C on adapter 0000 camask 0008 index 0003 pmtpid 0063
2014/08/17 11:49:02 76A00720 c New program number: 006C (1833:006C unknown) [pmt_list_management 3]
2014/08/17 11:49:02 76A00720 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/17 11:49:02 76A00720 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/08/17 11:49:03 76A00720 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/17 11:49:03 76A00720 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/08/17 11:49:03 76A00720 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/17 11:49:03 76A00720 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/08/17 11:49:04 76A00720 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/17 11:49:04 76A00720 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/08/17 11:49:04 76A00720 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/17 11:49:05 76A00720 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/08/17 11:49:05 76A00720 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/17 11:49:05 76A00720 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/08/17 11:49:06 76A00720 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/17 11:49:06 76A00720 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/08/17 11:49:06 76A00720 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/17 11:49:06 76A00720 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/08/17 11:49:07 76A00720 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/17 11:49:07 76A00720 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/08/17 11:49:07 76A00720 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/17 11:49:08 76A00720 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/08/17 11:49:08 76A00720 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/17 11:49:08 76A00720 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/08/17 11:49:09 76A00720 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/17 11:49:09 76A00720 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!



hab auch schon bei sky angerufen... damit sie die karte aktivieren....
 
AW: Sky V14 Config Einrichtung

Dann Übernehme doch einfach mal meine, wie oben angegeben. Diese Läuft in meiner Vu+ super.

Dann berichte mal, was dann rausgekommen ist.
 
AW: Sky V14 Config Einrichtung

Den blockbylen würde ich aber nicht übernehmen und schon gar nicht so:
blockemm-bylen = 0-38,40,42-44,65-124,126-127,139-255

-supraracer
 
AW: Sky V14 Config Einrichtung

hab jtz die von dir vorgeschlagene config. (deine)

leider immer noch auf Error....
config.


[reader]label = V14
protocol = internal
device = /dev/sci1
caid = 098C
services = SkyGermanyMitHDPlus
boxid = 12345678
detect = CD
mhz = 1
cardmhz = 2700
group = 1
emmcache = 1,1,10
ins7e11 = 15
ndsversion = 2
blockemm-s = 1
blockemm-g = 1
blockemm-unknown = 1
saveemm-u = 1
ecmwhitelist = 098C:98,9B,97,57,91
blockemm-bylen = 0-38,40,42-44,65-124,126-127,139-255
auprovid = 000001
autospeed = 1



log.datei
------------------------------------------------------------------------------->> OSCam << cardserver started at Sun Aug 17 12:33:31 2014
-------------------------------------------------------------------------------
2014/08/17 12:33:31 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9822 (mipsel-unknown-linux-gnu-ssl-libusb-pcsc)
2014/08/17 12:33:31 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 739
2014/08/17 12:33:31 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/08/17 12:33:31 0 s signal handling initialized
2014/08/17 12:33:31 0 s cccam: initialized (fd=5, port=13256)
2014/08/17 12:33:31 0 s V14 [internal] creating thread for device /dev/sci1
2014/08/17 12:33:31 0 s hdplus [internal] creating thread for device /dev/sci0
2014/08/17 12:33:31 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/08/17 12:33:31 0 s waiting for local card init
2014/08/17 12:33:31 7FCC70 r V14 [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=0.01 MHz
2014/08/17 12:33:31 809308 r hdplus [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=3.57 MHz
2014/08/17 12:33:31 7FEAA0 h webif: decompressed 154648 bytes back into 365608 bytes
2014/08/17 12:33:31 7FEAA0 h HTTP Server running. ip=0.0.0.0 port=25000
2014/08/17 12:33:32 809308 r hdplus [internal] card detected
2014/08/17 12:33:32 7FCC70 r V14 [internal] card detected
2014/08/17 12:33:33 809308 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2014/08/17 12:33:33 809308 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/08/17 12:33:33 809308 r hdplus [internal] TEST tempo mhz check = 500 mhz
2014/08/17 12:33:33 809308 r hdplus [internal] Calculated work ETU is 5.93 us reader mhz = 540
2014/08/17 12:33:33 809308 r hdplus [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
2014/08/17 12:33:33 809308 r hdplus [internal] Card responded ok for ifsd request of 251
2014/08/17 12:33:34 809308 r hdplus [internal] detect native nagra card
2014/08/17 12:33:35 809308 r hdplus [internal] found card system nagra
2014/08/17 12:33:35 809308 r hdplus [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/08/17 12:33:35 809308 r hdplus [nagra] ROM: D N A S P 1 4 2
2014/08/17 12:33:35 809308 r hdplus [nagra] REV: R e v G C 6
2014/08/17 12:33:35 809308 r hdplus [nagra] SER: ############
2014/08/17 12:33:35 809308 r hdplus [nagra] CAID: 1830
2014/08/17 12:33:35 809308 r hdplus [nagra] Prv.ID: 00 00 34 11 (sysid)
2014/08/17 12:33:35 809308 r hdplus [nagra] Prv.ID: 00 00 00 00
2014/08/17 12:33:35 809308 r hdplus [nagra] IRD ID: ############
2014/08/17 12:33:35 809308 r hdplus [nagra] active to: 2014/10/07 12:59
2014/08/17 12:33:35 809308 r hdplus [nagra] -----------------------------------------
2014/08/17 12:33:35 809308 r hdplus [nagra] |id |tier |valid from |valid to |
2014/08/17 12:33:35 809308 r hdplus [nagra] +----+--------+------------+------------+
2014/08/17 12:33:35 809308 r hdplus [nagra] |8011|0064 |2010/02/01 |2011/02/02 |
2014/08/17 12:33:35 809308 r hdplus [nagra] |8011|0065 |1992/01/01 |1993/01/01 |
2014/08/17 12:33:35 809308 r hdplus [nagra] |8011|0BEA |2011/01/25 |2015/03/15 |
2014/08/17 12:33:35 809308 r hdplus [nagra] -----------------------------------------
2014/08/17 12:33:35 809308 r hdplus [nagra] ready for requests
2014/08/17 12:33:40 7FCC70 r V14 [internal] Error activating card.
2014/08/17 12:33:59 0 --- Skipped 2 duplicated log lines ---
2014/08/17 12:33:59 7FCC70 r V14 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/08/17 12:33:59 7FCC70 r V14 [internal] card initializing error
2014/08/17 12:33:59 0 s init for all local cards done
2014/08/17 12:33:59 0 s anti cascading disabled
2014/08/17 12:33:59 811BB0 c plain dvbapi-client granted (local, au=on (2 reader))
2014/08/17 12:34:00 811BB0 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2014/08/17 12:34:04 811BB0 c Found 0 ECMpids and 7 STREAMpids in PMT
2014/08/17 12:34:04 811BB0 c [DVBAPI] Receiver wants to demux srvid 445D on adapter 0000 camask 0008 index 0003 pmtpid 0061
2014/08/17 12:34:04 811BB0 c New program number: 445D (FFFE:445D unknown) [pmt_list_management 3]
2014/08/17 12:36:13 811BB0 c [ADD PID 0] CAID: 1833 ECM_PID: 180F PROVID: 000000
2014/08/17 12:36:13 811BB0 c [ADD PID 1] CAID: 09C4 ECM_PID: 1B0F PROVID: 000000
2014/08/17 12:36:13 811BB0 c [ADD PID 2] CAID: 09AF ECM_PID: 1F0F PROVID: 000000
2014/08/17 12:36:13 811BB0 c [ADD PID 3] CAID: 098C ECM_PID: 1A0F PROVID: 000000
2014/08/17 12:36:13 811BB0 c Found 4 ECMpids and 3 STREAMpids in PMT
2014/08/17 12:36:13 811BB0 c [DVBAPI] Receiver wants to demux srvid 006C on adapter 0000 camask 0008 index 0003 pmtpid 0063
2014/08/17 12:36:13 811BB0 c New program number: 006C (1833:006C unknown) [pmt_list_management 3]
2014/08/17 12:36:13 811BB0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/17 12:36:13 811BB0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/08/17 12:36:13 811BB0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/17 12:36:13 811BB0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/08/17 12:36:13 811BB0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/17 12:36:13 811BB0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/08/17 12:36:13 811BB0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/17 12:36:14 811BB0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/08/17 12:36:14 811BB0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/17 12:36:14 811BB0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/08/17 12:36:15 811BB0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/17 12:36:15 811BB0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/08/17 12:36:15 811BB0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/17 12:36:15 811BB0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/08/17 12:36:16 811BB0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/17 12:36:16 811BB0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/08/17 12:36:16 811BB0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/17 12:36:17 811BB0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/08/17 12:36:17 811BB0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/17 12:36:17 811BB0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/08/17 12:36:18 811BB0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/17 12:36:18 811BB0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/08/17 12:36:18 811BB0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/17 12:36:18 811BB0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/08/17 12:36:19 811BB0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/17 12:36:19 811BB0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/08/17 12:36:19 811BB0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/17 12:36:20 811BB0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/08/17 12:36:20 811BB0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/17 12:36:20 811BB0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/08/17 12:36:21 811BB0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/17 12:36:21 811BB0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
 
AW: Sky V14 Config Einrichtung

Poste mal deine:

oscam.dvbapi
oscam.server
oscam.services
oscam.conf
oscam.user

benutze nur die V14 Karte im Reader, die anderen Karten aus der Box raus.

Nutzt du nebenbei auf der Box auch CCCam?
 
AW: Sky V14 Config Einrichtung

oscam.conf

[global]
logfile =/var/cache/oscam.log
disableuserfile = 0
clienttimeout = 5000
fallbacktimeout = 4900
clientmaxidle = 60
bindwait = 20
netprio = 0
nice = -1
maxlogsize = 2048
preferlocalcards = 1
emmlogdir = /var/etc


[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = local
pmt_mode = 0
decodeforever = 1


[webif]
httpport = 25000
httpuser = xxx
httppwd = xxxx
httprefresh = 10
httpallowed = 127.0.0.1,0.0.0.0-255.255.255.255
httpdyndns = xxxx


[cache]
Delay = 120


[cccam]
port = 13256
version = 2.3.0
reshare = 0

oscam.server
[reader]label = V14
protocol = internal
device = /dev/sci1
caid = 098C
services = SkyGermanyMitHDPlus
boxid = 12345678
detect = CD
mhz = 1
cardmhz = 2700
group = 1
emmcache = 1,1,10
ins7e11 = 15
ndsversion = 2
blockemm-s = 1
blockemm-g = 1
blockemm-unknown = 1
saveemm-u = 1
ecmwhitelist = 098C:98,9B,97,57,91
blockemm-bylen = 0-38,40,42-44,65-124,126-127,139-255
auprovid = 000001
autospeed = 1




[reader]
label = hdplus
protocol = internal
device = /dev/sci0
caid = 1830
rsakey = xxx
boxkey = xxx
detect = cd
cardmhz = 2700
autospeed = 1
group = 2
emmcache = 1,3,2
lb_weight = 100

oscam.user

[account]user = local
au = V14,hdplus
group = 1,2,3

oscam.dvbapi
P: 098CP: 1830

I: 0


alle karten raus...

cccam wird nicht verwendet....

oscam.services hab ich nicht....

wenn ich oscam neustarte... dann steht eine zeit "NEEDINIT" und dann geht er auf error
 
AW: Sky V14 Config Einrichtung


So, ich habe die Dateil etwas Umgeändert. Übernehme mal bitte all diese Einstellungen und Starte dann alles neu
 
Zuletzt bearbeitet von einem Moderator:
AW: Sky V14 Config Einrichtung

probier mal :

mhz = 600
cardmhz = 357


und kommentier ins7e11 aus erst.wenn die oscam zu alt ist kennt sie den parameter nicht.in diesem fall kommt es zum error
 
AW: Sky V14 Config Einrichtung

warum übernimmst du nicht einfach die config aus meiner Signatur,setze den Haken auf Autospeed = 1 ( in oscam reader),startest danach am besten die Box neu und fertig.
Und ich mal,lassen den blödsinn mit blockemm-bylen!! blockemm-u = 1
Wer blockemm-bylen nutzt ist wirklich selber schuld wenn sky mal was ändert und die karte danach dicht ist

[reader]
label = v14
protocol = internal
device = /dev/sci1
autospeed = 1
caid = 098C
boxid = 12345678
ins7e11 =
detect = CD
mhz = 450
cardmhz = 2700
group = 1
ecmwhitelist =
emmcache = 1,3,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2
 
AW: Sky V14 Config Einrichtung

Thueringer schrieb:
Und warum nicht ?? Wie dann ?
Zum Vergrößern anklicken....

Weil im offiziellen OScam Wiki bestimmt nicht ganz ohne Grund
Achtung: Es ist zweckmäßig, einen Range in blockemm-bylen nicht mit einer 0 zu beginnen! Bei einer 0 am Anfang eines Ranges haben User negative Erfahrungen mit dem Durchrutschen unerwünschter EMM gemacht. Besser die 1 wählen!
steht.
Warum ich es generell überhaupt nicht setzen würde wurde z.B. von cojo hier schon mehrfach erwähnt.

-supraracer
 
AW: Sky V14 Config Einrichtung

da ich ein anfänger bin, probiere ich das aus.... was der Fachmann mir sagt!!


immer noch auf error... kann doch nicht sein ey... ist die karte vlt. defekt ?

was meinst du mit " kommentier ins7e11 aus erst"


danke und gruß
 
AW: Sky V14 Config Einrichtung

Auskommentieren tut man indem eine # vor der Zeile gesetzt wird !

Beim nächsten reboot wird diese Zeile dann nicht mit eingelesen

Lg Bodo


Sent from my iPhone using Tapatalk
 
Du musst dich einloggen oder registrieren, um hier zu antworten.

Ähnliche Themen

H
gelöst ORF K Karte wird nicht hell
2 3
Antworten
41
Aufrufe
1K
ghost0815
OScam HD+ easymouse Input/output error
2 3
Antworten
40
Aufrufe
867
conga
H
gelöst Rasperry Pi3b mit IPC und oscam plötzlich "tot" und nicht mehr erreichbar
Antworten
14
Aufrufe
453
Token
T
K
gelöst hab auch eine K2410XXX Karte bekommen,
Antworten
14
Aufrufe
2K
Token
T
U
config Fragen - Hilfen
Antworten
7
Aufrufe
478
urbru
U
Menü
Anmelden
Registrieren
Für die Nutzung dieser Website sind Cookies erforderlich. Du musst diese akzeptieren, um die Website weiter nutzen zu können. Erfahre mehr…