Hallo,
bekomme meine S02 karte mit
easymouse nicht ans laufen Oscam 1.2 aus dem log kommt folgendes:
2012/07/16 17:27:45 0 easymaus1 card detected
2012/07/16 17:27:48 9D53458 r ATR is malformed, it reports 15 historical bytes but there are only -1
2012/07/16 17:27:51 9D53458 r ATR is malformed, it reports 15 historical bytes but there are only -1
2012/07/16 17:27:54 9D53458 r ATR is malformed, it reports 15 historical bytes but there are only -1
2012/07/16 17:27:55 9D53458 r Error activating card.
2012/07/16 17:27:59 9D53458 r ATR is malformed, it reports 15 historical bytes but there are only -1
2012/07/16 17:28:02 9D53458 r ATR is malformed, it reports 15 historical bytes but there are only -1
2012/07/16 17:28:05 9D53458 r ATR is malformed, it reports 15 historical bytes but there are only -1
2012/07/16 17:28:06 9D53458 r Error activating card.
2012/07/16 17:28:10 9D53458 r ATR is malformed, it reports 15 historical bytes but there are only -1
2012/07/16 17:28:13 9D53458 r ATR is malformed, it reports 15 historical bytes but there are only -1
2012/07/16 17:28:16 9D53458 r ATR is malformed, it reports 15 historical bytes but there are only -1
2012/07/16 17:28:17 9D53458 r Error activating card.
meine Einstellungen sind
easymouse:
5V ; mouse ; 600MHZ
meine oscam reader einstllungen sind:
[reader]
label = easymaus1
description =
easymouse
protocol = mouse
device = /dev/ttyUSB0
caid = 1702
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,3,2
auprovid = 001702
Bitte um Hilfe!!!!!!!