Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us

little313 · 12. Dezember 2020

Hallo, ich habe auf meinem Raspberry OSCam r11211 laufen, seit einigen Tagen beleibt jedoch das HD Bild meine HD2 Karte immer wieder hängen.
Am Raspberry ist per usb und Kartenleser (mouse) die HD+ Karte.
Aus dem log bekomme ich:

2020/12/12 14:09:52 0C8734B3 c (ecm) tobias (1843@000000/0000/EF15/89:B2AE9F221E91F6FB1B3E3F3D5153BD54): found (382 ms) by HD02 - RTLII HD
2020/12/12 14:09:54 45D41B73 c (ecm) guenter (1843@000000/0000/EF75/89:BFC863852EC46FA6467A20CA8A99D18D): found (385 ms) by HD02 - ProSieben HD
2020/12/12 14:10:05 6253352F r (reader) HD02 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2020/12/12 14:10:07 6253352F r (reader) HD02 [nagra] T1 Resync command error, trying to reactivate!
2020/12/12 14:10:07 6253352F r (reader) HD02 [nagra] Buffers readed 0 bytes total time_us 75213
2020/12/12 14:10:08 6253352F r (reader) HD02 [nagra] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2020/12/12 14:10:08 6253352F r (reader) HD02 [nagra] Init card protocol T1, FI=9, F=512, D=16, N=255
2020/12/12 14:10:08 6253352F r (reader) HD02 [nagra] Setting baudrate to 111600 bps
2020/12/12 14:10:08 6253352F r (reader) HD02 [nagra] Calculated work ETU is 8.96 us reader mhz = 357
2020/12/12 14:10:08 6253352F r (reader) HD02 [nagra] Buffers readed 0 bytes total time_us 75259
2020/12/12 14:10:08 6253352F r (reader) HD02 [nagra] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2020/12/12 14:10:08 6253352F r (reader) HD02 [nagra] Card responded ok for ifsd request of 160
2020/12/12 14:10:08 45D41B73 c (ecm) guenter (1843@000000/0000/EF75/89:010FE0F682FD990BD0CA6339E930BB77): not found (4783 ms) by HD02 - ProSieben HD
2020/12/12 14:10:09 45D41B73 c (ecm) guenter (1843@000000/0000/EF75/89:010FE0F682FD990BD0CA6339E930BB77): rejected group (1 ms) - ProSieben HD (no matching reader)
2020/12/12 14:10:09 0C8734B3 c (ecm) tobias (1843@000000/0000/EF15/89:06EBDD49DE721565867F7148D9086646): found (2491 ms) by HD02 - RTLII HD
2020/12/12 14:10:13 45D41B73 c (ecm) guenter (1843@000000/0000/EF75/89:860C3BAE7D74C8D97D5880A3657153A4): rejected group (1 ms) - ProSieben HD (no matching reader)
2020/12/12 14:10:22 0C8734B3 c (-) -- Skipped 1 duplicated log lines --
2020/12/12 14:10:22 0C8734B3 c (ecm) tobias (1843@000000/0000/EF15/89660693189E94D3F8E3D9228C0F40FFA): found (382 ms) by HD02 - RTLII HD
2020/12/12 14:10:23 45D41B73 c (ecm) guenter (1843@000000/0000/EF75/89:9B3A89226942338F1620C8F233DCF343): rejected group (0 ms) - ProSieben HD (no matching reader)
2020/12/12 14:10:33 45D41B73 c (-) -- Skipped 1 duplicated log lines --
2020/12/12 14:10:33 45D41B73 c (ecm) guenter (1843@000000/0000/EF75/89:4DF58D17F82D36EC197FF469B65DDCFD): rejected group (0 ms) - ProSieben HD (no matching reader)
2020/12/12 14:10:37 0C8734B3 c (ecm) tobias (1843@000000/0000/EF15/89:2A66201A66051EE17E32A539B82DD6E3): found (381 ms) by HD02 - RTLII HD
2020/12/12 14:10:39 45D41B73 c (ecm) guenter (1843@000000/0000/EF75/89:4DF58D17F82D36EC197FF469B65DDCFD): found (385 ms) by HD02 - ProSieben HD
2020/12/12 14:10:41 6253352F r (reader) HD02 [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2020/12/12 14:10:42 6253352F r (reader) HD02 [nagra] T1 Resync command error, trying to reactivate!
2020/12/12 14:10:42 6253352F r (reader) HD02 [nagra] Buffers readed 0 bytes total time_us 75242
2020/12/12 14:10:44 6253352F r (reader) HD02 [nagra] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2020/12/12 14:10:44 6253352F r (reader) HD02 [nagra] Init card protocol T1, FI=9, F=512, D=16, N=255
2020/12/12 14:10:44 6253352F r (reader) HD02 [nagra] Setting baudrate to 111600 bps
2020/12/12 14:10:44 6253352F r (reader) HD02 [nagra] Calculated work ETU is 8.96 us reader mhz = 357
2020/12/12 14:10:44 6253352F r (reader) HD02 [nagra] Buffers readed 0 bytes total time_us 75261
2020/12/12 14:10:44 6253352F r (reader) HD02 [nagra] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2020/12/12 14:10:44 6253352F r (reader) HD02 [nagra] Card responded ok for ifsd request of 160
2020/12/12 14:10:44 45D41B73 c (ecm) guenter (1843@000000/0000/EF75/89:8F2FF26D8520A59298F1A4905CCA0744): not found (428 ms) by HD02 - ProSieben HD
2020/12/12 14:10:49 45D41B73 c (ecm) guenter (1843@000000/0000/EF75/89:8F2FF26D8520A59298F1A4905CCA0744): rejected group (0 ms) - ProSieben HD (no matching reader)
2020/12/12 14:10:52 0C8734B3 c (ecm) tobias (1843@000000/0000/EF15/89:A3FF88F05B4F34CF7DE73F50D9B29228): found (390 ms) by HD02 - RTLII HD
2020/12/12 14:10:53 45D41B73 c (ecm) guenter (1843@000000/0000/EF75/89:E3666E2BCE3A16F752465F23DE6A2A7A): rejected group (0 ms) - ProSieben HD (no matching reader)
2020/12/12 14:10:59 45D41B73 c (ecm) guenter (1843@000000/0000/EF75/89:E3666E2BCE3A16F752465F23DE6A2A7A): rejected group (1 ms) - ProSieben HD (no matching reader)
2020/12/12 14:11:04 45D41B73 c (ecm) guenter (1843@000000/0000/EF75/89:E3C745E6602A8C1918C51338FD6747A5): rejected group (0 ms) - ProSieben HD (no matching reader)
2020/12/12 14:11:07 0C8734B3 c (ecm) tobias (1843@000000/0000/EF15/89:12FE4DE220DEDF77AFA164ED12C7CA11): found (380 ms) by HD02 - RTLII HD
2020/12/12 14:11:10 45D41B73 c (ecm) guenter (1843@000000/0000/EF75/89:E3C745E6602A8C1918C51338FD6747A5): rejected group (0 ms) - ProSieben HD (no matching reader)
2020/12/12 14:11:14 45D41B73 c (ecm) guenter (1843@000000/0000/EF75/89:9583B9FC0ABA179EEA088A1B2E6A67D5): rejected group (0 ms) - ProSieben HD (no matching reader)
2020/12/12 14:11:20 45D41B73 c (ecm) guenter (1843@000000/0000/EF75/89:9583B9FC0ABA179EEA088A1B2E6A67D5): found (385 ms) by HD02 - ProSieben HD
2020/12/12 14:11:22 0C8734B3 c (ecm) tobias (1843@000000/0000/EF15/89:2FCA0545E21F7CEC8E34AF831A2CEA85): found (382 ms) by HD02 - RTLII HD

In der OSCAM.conf am Server ist das:

# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11211
# Read more:
Sie müssen registriert sein, um Links zu sehen.

[global]
logfile = /var/log/oscam.log
fallbacktimeout = 2000
nice = -1
maxlogsize = 2048
preferlocalcards = 1
cwlogdir = /var/log/
emmlogdir = /var/log/emm/
lb_mode = 1
lb_save = 500

[cs357x]
port = 37800

[cccam]
port = 12000
nodeid = E1623467106A148C
version = 2.3.0
reshare = 1

[webif]
httpport = 8888
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.0.255

Die Client sind mit cs357x am Server

Kann mir jemand helfen??

leyla38 · 12. Dezember 2020

Und welche kartenleser handelt sich den wie ist der Reader angelegt?

little313 · 12. Dezember 2020

Es ist eine
Phoenix/smartmouse Card Reader y5=12MHz 350815
/dev/HD02 A504AR6VV

Entitlements for HD02

Entitlements for HD02

Cardsystem Valid To IRD ID (nagra) Maturity Provider
nagra 2021-02-12 FF FF FF FF n/a 00 00 34 11 (sysid)
00 00 00 00
00 00 80 11
Serial Rom ATR
DNASP180 Mer000 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
Type Caid Provid ID Class Start Date Expire Date Name
tier 1843 008011 0000000000000066 00000000 2011-08-01 2012-08-01 HD+ Gratisjahr (HD02)
tier 1843 008011 0000000000000067 00000000 2010-01-19 2010-01-20 HD+ ungenutzt
tier 1843 008011 0000000000000BB8 00000000 2016-02-10 2021-01-31 Monatsabo HD+
tier 1843 008011 0000000000000BEA 00000000 2013-08-16 2014-08-31 Jahresabo HD+

Es wurde nichts geändert, läuft eigentlich seit 2016 durchgehend super.
Ich hab´s damals so gemacht wie im

Sie müssen registriert sein, um Links zu sehen.

OSCAM.server

# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11211
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = HD02
protocol = mouse
device = /dev/HD02
boxkey = A7642F57BC96D37C
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
detect = cd
group = 1
emmcache = 1,1,2,0

[reader]
label = ORF
protocol = mouse
device = /dev/ORF
services = !v14,orf
caid = 0D95,0D05
boxkey = 1122334455667788
force_irdeto = 1
detect = cd
group = 1
emmcache = 1,1,2,0

leyla38 · 12. Dezember 2020

in oscam server fehlt dieser Eintrag .:
caid = 1843
hinzufügen anschließend oscam neu starten !

Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us

little313

Newbie

leyla38

Super Elite User

little313

Newbie

leyla38

Super Elite User

Ähnliche Themen

Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us

little313

Newbie

leyla38

Super Elite User

little313

Newbie

leyla38

Super Elite User

Ähnliche Themen

Datenschutz & Transparenz

Datenschutz & Transparenz