Dies ist eine mobil optimierte Seite, die schnell lädt. Wenn Sie die Seite ohne Optimierung laden möchten, dann klicken Sie auf diesen Text.

Raspberry und HD02

AW: Raspberry und HD02

das VALID TO passt doch
was kommt im log bei den Sendern die nicht gehen?
 
AW: Raspberry und HD02

Oh bin nur mit ccccam am updaten. Dann hast du das Problem gefunden.... Denke ich...

aber dann sollte doch alles dunkel sein oder?
 
AW: Raspberry und HD02

Ausser die FTA Sender Sat1 HD, Pro7 HD und Kabel1 HD.

Starte oscam neu (Web If, oben rechts Restart) dann auf Files, Logfile und das Log ab Start oscam posten.

MfG
 
Wollte soeben auch mal eine HD02 in meiner Easymouse2 betreiben.

Guten Morgen

Wollte soeben auch mal eine HD02 in meiner Easymouse2 betreiben.
Alles läuft am Raspi .
Leider kommt immer Error und ich kann nicht wirklich aus dem Log was verstehen.




oscam server

[reader]
enable = 1
label = hdplus
protocol = mouse
device = /dev/hdplus #UDEV Regel sollte laufen , andere Karten gehen auch
#services = hdplus
caid = 1843
boxkey = A7######7C
raskey = BF######D5
detect = cd
mhz = 357
cardmhz = 368
#ident = 1843:000000,003411,008011
group = 3
emmcache = 1,3,2


oscam log

  • 2014/12/27 11:48:16 B9E2A8 r hdplus [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2014/12/27 11:48:17 B9E2A8 r hdplus [mouse] T1 Resync command error, trying to reactivate!
  • 2014/12/27 11:48:19 B9E2A8 r hdplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
  • 2014/12/27 11:48:19 B9E2A8 r hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2014/12/27 11:48:19 B9E2A8 r hdplus [mouse] Setting baudrate to 115200 bps
  • 2014/12/27 11:48:19 B9E2A8 r hdplus [mouse] Calculated work ETU is 8.96 us reader mhz = 357
  • 2014/12/27 11:48:19 B9E2A8 r hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
  • 2014/12/27 11:48:19 B9E2A8 r hdplus [mouse] Card responded ok for ifsd request of 160
  • 2014/12/27 11:48:19 B9E2A8 r hdplus [mouse] card system not supported
  • 2014/12/27 11:48:19 B9E2A8 r hdplus [mouse] Normal mode failed, reverting to Deprecated Mode
  • 2014/12/27 11:48:20 B9E2A8 r hdplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
  • 2014/12/27 11:48:20 B9E2A8 r hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2014/12/27 11:48:20 B9E2A8 r hdplus [mouse] Calculated work ETU is 104.20 us reader mhz = 357
  • 2014/12/27 11:48:20 B9E2A8 r hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
  • 2014/12/27 11:48:23 B9E2A8 r hdplus [mouse] Warning: Card returned error on setting ifsd value to 160
  • 2014/12/27 11:48:24 B9E2A8 r hdplus [mouse] detect native nagra card
  • 2014/12/27 11:48:26 B9E2A8 r hdplus [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2014/12/27 11:48:28 B9E2A8 r hdplus [mouse] T1 Resync command error, trying to reactivate!
  • 2014/12/27 11:48:30 B9E2A8 r hdplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
  • 2014/12/27 11:48:30 B9E2A8 r hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2014/12/27 11:48:30 B9E2A8 r hdplus [mouse] Setting baudrate to 115200 bps
  • 2014/12/27 11:48:30 B9E2A8 r hdplus [mouse] Calculated work ETU is 8.96 us reader mhz = 357
  • 2014/12/27 11:48:30 B9E2A8 r hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
  • 2014/12/27 11:48:30 B9E2A8 r hdplus [mouse] Card responded ok for ifsd request of 160
  • 2014/12/27 11:48:33 B9E2A8 r hdplus [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2014/12/27 11:48:34 B9E2A8 r hdplus [mouse] T1 Resync command error, trying to reactivate!
  • 2014/12/27 11:48:36 B9E2A8 r hdplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
  • 2014/12/27 11:48:36 B9E2A8 r hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2014/12/27 11:48:36 B9E2A8 r hdplus [mouse] Setting baudrate to 115200 bps
  • 2014/12/27 11:48:36 B9E2A8 r hdplus [mouse] Calculated work ETU is 8.96 us reader mhz = 357
  • 2014/12/27 11:48:36 B9E2A8 r hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
  • 2014/12/27 11:48:36 B9E2A8 r hdplus [mouse] Card responded ok for ifsd request of 160
  • 2014/12/27 11:48:36 B9E2A8 r hdplus [mouse] card system not supported
  • 2014/12/27 11:48:36 B9E2A8 r hdplus [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
  • 2014/12/27 11:48:36 B9E2A8 r hdplus [mouse] card initializing error

Easymouse2 alles unten
Wenn jemand den log lesen kann wäre es nett mir kurz einen tip zu geben

MfG
 
AW: Freetz Easymouse2 hd02

mach mal Easymouse:
Code: 
unten unten oben oben

oscam.server
Code: 
[COLOR=#333333][reader][/COLOR]
[COLOR=#333333]enable = 1[/COLOR]
[COLOR=#333333]label = hdplus[/COLOR]
[COLOR=#333333]protocol = mouse[/COLOR]
[COLOR=#333333]device = /dev/hdplus [/COLOR]
[COLOR=#333333]caid = 1843[/COLOR]
[COLOR=#333333]boxkey = A7######7C[/COLOR]
[COLOR=#333333]raskey = BF######D5[/COLOR]
[COLOR=#333333]detect = cd[/COLOR]
[COLOR=#333333]mhz = 600[/COLOR]
[COLOR=#333333]cardmhz = 368[/COLOR]
[COLOR=#333333]group = 3[/COLOR]
[COLOR=#333333]emmcache = 1,1,2[/COLOR]

fritzbox neu starten
 
AW: Freetz Easymouse2 hd02

Leider ohne Erfolg , im Rec unter scam läuft Sie.


  • 2014/12/27 11:58:31 DB52A8 r hdplus [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2014/12/27 11:58:32 DB52A8 r hdplus [mouse] T1 Resync command error, trying to reactivate!
  • 2014/12/27 11:58:34 DB52A8 r hdplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
  • 2014/12/27 11:58:34 DB52A8 r hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2014/12/27 11:58:34 DB52A8 r hdplus [mouse] Setting baudrate to 115200 bps
  • 2014/12/27 11:58:34 DB52A8 r hdplus [mouse] Calculated work ETU is 5.33 us reader mhz = 600
  • 2014/12/27 11:58:34 DB52A8 r hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
  • 2014/12/27 11:58:34 DB52A8 r hdplus [mouse] Card responded ok for ifsd request of 160
  • 2014/12/27 11:58:34 DB52A8 r hdplus [mouse] card system not supported
  • 2014/12/27 11:58:34 DB52A8 r hdplus [mouse] Normal mode failed, reverting to Deprecated Mode
  • 2014/12/27 11:58:35 DB52A8 r hdplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
  • 2014/12/27 11:58:35 DB52A8 r hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2014/12/27 11:58:35 DB52A8 r hdplus [mouse] Calculated work ETU is 62.00 us reader mhz = 600
  • 2014/12/27 11:58:35 DB52A8 r hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
  • 2014/12/27 11:58:36 DB52A8 r hdplus [mouse] Warning: Card returned error on setting ifsd value to 160
  • 2014/12/27 11:58:37 DB52A8 r hdplus [mouse] detect native nagra card
  • 2014/12/27 11:58:38 DB52A8 r hdplus [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2014/12/27 11:58:39 DB52A8 r hdplus [mouse] T1 Resync command error, trying to reactivate!
  • 2014/12/27 11:58:41 DB52A8 r hdplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
  • 2014/12/27 11:58:41 DB52A8 r hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2014/12/27 11:58:41 DB52A8 r hdplus [mouse] Setting baudrate to 115200 bps
  • 2014/12/27 11:58:41 DB52A8 r hdplus [mouse] Calculated work ETU is 5.33 us reader mhz = 600
  • 2014/12/27 11:58:41 DB52A8 r hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
  • 2014/12/27 11:58:41 DB52A8 r hdplus [mouse] Card responded ok for ifsd request of 160
  • 2014/12/27 11:58:43 DB52A8 r hdplus [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2014/12/27 11:58:44 DB52A8 r hdplus [mouse] T1 Resync command error, trying to reactivate!
  • 2014/12/27 11:58:45 DB52A8 r hdplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
  • 2014/12/27 11:58:45 DB52A8 r hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2014/12/27 11:58:45 DB52A8 r hdplus [mouse] Setting baudrate to 115200 bps
  • 2014/12/27 11:58:45 DB52A8 r hdplus [mouse] Calculated work ETU is 5.33 us reader mhz = 600
  • 2014/12/27 11:58:45 DB52A8 r hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
  • 2014/12/27 11:58:45 DB52A8 r hdplus [mouse] Card responded ok for ifsd request of 160
  • 2014/12/27 11:58:45 DB52A8 r hdplus [mouse] card system not supported
  • 2014/12/27 11:58:45 DB52A8 r hdplus [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
  • 2014/12/27 11:58:45 DB52A8 r hdplus [mouse] card initializing error
 
AW: Freetz Easymouse2 hd02

log ab start?
wie sieht das jetzt aus?
RSA und BOXKEY sind auch vollständig und ohne leerzeichen
 
AW: Freetz Easymouse2 hd02

Log habe ich hinzugefügt. Ich wollte auch keinen neuen Fred auf machen , daher über die Suche hier hin gelangt. Jetzt habe ich gesehen das ich etwas falsch bin , sollte jedoch kein Problem sein. Habe halt kein Freetz sondern ein Raspi
 
AW: Freetz Easymouse2 hd02

du weißt aber das du hier im Fritzbox Bereich bist mit deinem Raspi
sollte ein zuständiger mal sowieso verschieben

log ab Start der OScam
welche OScam Version?
Easymouse direkt am Raspi oder Hub dazwischen
 
AW: Raspberry und HD02

Hallo

Bekomme meine Hd02 auch nicht ans laufen. Die Easymouse2 hängt direkt am Raspi mit einer weiteren V14 die auch läuft ( Ohne Hub )
Easymouse mit HD02 ist jetzt auf unten unten oben oben eigestellt.
Reader
[reader]enable = 1
label = hdplus
protocol = mouse
device = /dev/hdplus
#services = hdplus
caid = 1843
boxkey = A7642F57BC96D37C
raskey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A 23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156 F9EB64E8168EF09E4D9C5CCA4DD5
detect = cd
mhz = 600
cardmhz = 369
group = 3
emmcache = 1,1,2


  • 2014/12/27 12:15:32 DB52A8 r hdplus [mouse] Reader initialized (device=/dev/hdplus, detect=cd, mhz=600, cardmhz=369)
  • 2014/12/27 12:15:32 DB52A8 r hdplus [mouse] card detected
  • 2014/12/27 12:15:34 DB52A8 r hdplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
  • 2014/12/27 12:15:34 DB52A8 r hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2014/12/27 12:15:34 DB52A8 r hdplus [mouse] Setting baudrate to 115312 bps
  • 2014/12/27 12:15:34 DB52A8 r hdplus [mouse] Calculated work ETU is 5.33 us reader mhz = 600
  • 2014/12/27 12:15:34 DB52A8 r hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
  • 2014/12/27 12:15:34 DB52A8 r hdplus [mouse] Card responded ok for ifsd request of 160
  • 2014/12/27 12:15:35 DB52A8 r hdplus [mouse] detect native nagra card
  • 2014/12/27 12:15:37 DB52A8 r hdplus [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2014/12/27 12:15:38 DB52A8 r hdplus [mouse] T1 Resync command error, trying to reactivate!
  • 2014/12/27 12:15:39 DB52A8 r hdplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
  • 2014/12/27 12:15:39 DB52A8 r hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2014/12/27 12:15:39 DB52A8 r hdplus [mouse] Setting baudrate to 115312 bps
  • 2014/12/27 12:15:39 DB52A8 r hdplus [mouse] Calculated work ETU is 5.33 us reader mhz = 600
  • 2014/12/27 12:15:39 DB52A8 r hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
  • 2014/12/27 12:15:39 DB52A8 r hdplus [mouse] Card responded ok for ifsd request of 160
  • 2014/12/27 12:15:39 DB52A8 r hdplus [mouse] card system not supported
  • 2014/12/27 12:15:39 DB52A8 r hdplus [mouse] Normal mode failed, reverting to Deprecated Mode
  • 2014/12/27 12:15:41 DB52A8 r hdplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
  • 2014/12/27 12:15:41 DB52A8 r hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2014/12/27 12:15:41 DB52A8 r hdplus [mouse] Calculated work ETU is 62.00 us reader mhz = 600
  • 2014/12/27 12:15:41 DB52A8 r hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
  • 2014/12/27 12:15:42 DB52A8 r hdplus [mouse] Warning: Card returned error on setting ifsd value to 160
  • 2014/12/27 12:15:43 DB52A8 r hdplus [mouse] detect native nagra card
  • 2014/12/27 12:15:45 DB52A8 r hdplus [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2014/12/27 12:15:46 DB52A8 r hdplus [mouse] T1 Resync command error, trying to reactivate!
  • 2014/12/27 12:15:47 DB52A8 r hdplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
  • 2014/12/27 12:15:47 DB52A8 r hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2014/12/27 12:15:47 DB52A8 r hdplus [mouse] Setting baudrate to 115312 bps
  • 2014/12/27 12:15:47 DB52A8 r hdplus [mouse] Calculated work ETU is 5.33 us reader mhz = 600
  • 2014/12/27 12:15:47 DB52A8 r hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
  • 2014/12/27 12:15:47 DB52A8 r hdplus [mouse] Card responded ok for ifsd request of 160
  • 2014/12/27 12:15:49 DB52A8 r hdplus [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2014/12/27 12:15:50 DB52A8 r hdplus [mouse] T1 Resync command error, trying to reactivate!
  • 2014/12/27 12:15:52 DB52A8 r hdplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
  • 2014/12/27 12:15:52 DB52A8 r hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2014/12/27 12:15:52 DB52A8 r hdplus [mouse] Setting baudrate to 115312 bps
  • 2014/12/27 12:15:52 DB52A8 r hdplus [mouse] Calculated work ETU is 5.33 us reader mhz = 600
  • 2014/12/27 12:15:52 DB52A8 r hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
  • 2014/12/27 12:15:52 DB52A8 r hdplus [mouse] Card responded ok for ifsd request of 160
  • 2014/12/27 12:15:52 DB52A8 r hdplus [mouse] card system not supported
  • 2014/12/27 12:15:52 DB52A8 r hdplus [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
  • 2014/12/27 12:15:52 DB52A8 r hdplus [mouse] card initializing error

Karte zeigt immer Error an.

MfG
 
AW: Raspberry und HD02

doppelt hält besser, wa?
wär es nicht besser einen eigenen Thread aufzumachen anstatt dich immer irgendwo dran zu hängen

wie stark ist dein Netzteil?
probier mal nur die HD02 am Raspi und starte neu, V14 abstecken
 
AW: Raspberry und HD02

Nein wie gesagt bin ich über die Suche dahin gekommen weil ihr immer meckert das man nicht jedes mal ein extra Post aufmachen sollte.
Jetzt bin ich halt in der richtigen Kategorie und habe einen Post gesucht der das gleiche Problem beinhaltet , so wie Ihr es gerne hättet.

Zurück zum Thema ,

ich habe keinen Hub sondern direkt die Easymouse am Raspi , der hat ja auch 4 x USB , ist der neuere +

ohne die V14 , also nur die HD am Raspi geht auch nicht


  • 2014/12/27 12:28:13 12282A8 r hdplus [mouse] Reader initialized (device=/dev/hdplus, detect=cd, mhz=600, cardmhz=369)
  • 2014/12/27 12:28:14 12282A8 r hdplus [mouse] card detected
  • 2014/12/27 12:28:15 12282A8 r hdplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
  • 2014/12/27 12:28:15 12282A8 r hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2014/12/27 12:28:15 12282A8 r hdplus [mouse] Setting baudrate to 115312 bps
  • 2014/12/27 12:28:15 12282A8 r hdplus [mouse] Calculated work ETU is 5.33 us reader mhz = 600
  • 2014/12/27 12:28:16 12282A8 r hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
  • 2014/12/27 12:28:16 12282A8 r hdplus [mouse] Card responded ok for ifsd request of 160
  • 2014/12/27 12:28:17 12282A8 r hdplus [mouse] detect native nagra card
  • 2014/12/27 12:28:18 12282A8 r hdplus [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2014/12/27 12:28:19 12282A8 r hdplus [mouse] T1 Resync command error, trying to reactivate!
  • 2014/12/27 12:28:21 12282A8 r hdplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
  • 2014/12/27 12:28:21 12282A8 r hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2014/12/27 12:28:21 12282A8 r hdplus [mouse] Setting baudrate to 115312 bps
  • 2014/12/27 12:28:21 12282A8 r hdplus [mouse] Calculated work ETU is 5.33 us reader mhz = 600
  • 2014/12/27 12:28:21 12282A8 r hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
  • 2014/12/27 12:28:21 12282A8 r hdplus [mouse] Card responded ok for ifsd request of 160
  • 2014/12/27 12:28:21 12282A8 r hdplus [mouse] card system not supported
  • 2014/12/27 12:28:21 12282A8 r hdplus [mouse] Normal mode failed, reverting to Deprecated Mode
  • 2014/12/27 12:28:22 12282A8 r hdplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
  • 2014/12/27 12:28:22 12282A8 r hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2014/12/27 12:28:22 12282A8 r hdplus [mouse] Calculated work ETU is 62.00 us reader mhz = 600
  • 2014/12/27 12:28:22 12282A8 r hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
  • 2014/12/27 12:28:24 12282A8 r hdplus [mouse] Warning: Card returned error on setting ifsd value to 160
  • 2014/12/27 12:28:25 12282A8 r hdplus [mouse] detect native nagra card
  • 2014/12/27 12:28:26 12282A8 r hdplus [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2014/12/27 12:28:28 12282A8 r hdplus [mouse] T1 Resync command error, trying to reactivate!
  • 2014/12/27 12:28:29 12282A8 r hdplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
  • 2014/12/27 12:28:29 12282A8 r hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2014/12/27 12:28:29 12282A8 r hdplus [mouse] Setting baudrate to 115312 bps
  • 2014/12/27 12:28:29 12282A8 r hdplus [mouse] Calculated work ETU is 5.33 us reader mhz = 600
  • 2014/12/27 12:28:29 12282A8 r hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
  • 2014/12/27 12:28:29 12282A8 r hdplus [mouse] Card responded ok for ifsd request of 160
  • 2014/12/27 12:28:31 12282A8 r hdplus [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2014/12/27 12:28:32 12282A8 r hdplus [mouse] T1 Resync command error, trying to reactivate!
  • 2014/12/27 12:28:33 12282A8 r hdplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
  • 2014/12/27 12:28:33 12282A8 r hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2014/12/27 12:28:33 12282A8 r hdplus [mouse] Setting baudrate to 115312 bps
  • 2014/12/27 12:28:33 12282A8 r hdplus [mouse] Calculated work ETU is 5.33 us reader mhz = 600
  • 2014/12/27 12:28:33 12282A8 r hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
  • 2014/12/27 12:28:33 12282A8 r hdplus [mouse] Card responded ok for ifsd request of 160
  • 2014/12/27 12:28:33 12282A8 r hdplus [mouse] card system not supported
  • 2014/12/27 12:28:33 12282A8 r hdplus [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
  • 2014/12/27 12:28:33 12282A8 r hdplus [mouse] card initializing error
 
Zuletzt bearbeitet:
AW: Raspberry und HD02

wie stark ist das Netzteil?
probier die Karte mal in dem anderem Reader

PS.
wir meckern HIER nicht
es ist immer besser einen eigenen Thread aufzumachen da jedes Problem anders ist, sonst würde ja die Lösung schon bereit stehen
 
Du musst dich einloggen oder registrieren, um hier zu antworten.

Ähnliche Themen

F
RTL HD setzt aus
Antworten
14
Aufrufe
439
Derek Buegel
Mehrere Aufnahmen gleichzeitig?
2 3
Antworten
32
Aufrufe
644
Sky4
T
gelöst HD02 und Orf Karte funktioniern nicht richtig mit Icam
Antworten
11
Aufrufe
749
turbo16v
T
gelöst RTL HD mit caid 186A funktioniert nicht
Antworten
7
Aufrufe
363
Vigor
P
gelöst HD02 funktioniert nicht mit oscam im vuduo4k
Antworten
8
Aufrufe
301
Alex2018
A
Menü
Anmelden
Registrieren
Für die Nutzung dieser Website sind Cookies erforderlich. Du musst diese akzeptieren, um die Website weiter nutzen zu können. Erfahre mehr…