Dies ist eine mobil optimierte Seite, die schnell lädt. Wenn Sie die Seite ohne Optimierung laden möchten, dann klicken Sie auf diesen Text.

Probleme mit V14

    Nobody is reading this thread right now.
AW: Probleme mit V14

Hi,

schau mal via FTP oder Telnet, ob und welche Dateien vorhanden sind
oscam/oscamconf, oscam/oscam.conf oder beide.

Grüße
Bombadil
 
AW: Probleme mit V14

Ok ich war nun mittels FTP in dem angegeben Verzeichnis, dort war wirklich nichts zu finden von den Configs.
Ich habe alle nun manuell erstellt. Jetzt kommt allerdings eine weitere Fehlermeldung.

Code: 
[TABLE="width: 995"]
[TR]
[TD][/TD]
[TD]Starte oscam:
/mod/etc/init.d/rc.oscam: line 100: /var/InternerSpeicher/cs/oscam/oscam: not found
/mod/etc/init.d/rc.oscam: line 100: /var/media/ftp/watchdog/oscam/card-init-error.sh: not found
Starte oscam...
USB-Serial Module geladen
[/TD]
[/TR]
[/TABLE]
 
AW: Probleme mit V14

Hi,

welche Dateien hast du dort erstellt? Wichtig ist diese

oscam.conf

Die muss mit den richtigen Daten gefüllt sein, z.B.

Code: 
 [global]

#dort muss mindestens das rein

Code: 
 logfile = /var/log/oscam.log

und diese Sektion

Code: 
 [webif]

# mit minimal
Code: 
 httpport                      = 666

damit du auf das WebIf kommst.

Die Anderen Einräge kannst du dann vom WebIf machen.

Grüße
Bombadil
 
AW: Probleme mit V14

Hallo, ja die sollten gesetzt sein.

oscam.conf
[global]
serverip = 192.168.178.42
usrfile = /var/log/oscamuser.log
logfile = /var/log/oscam.log
nice = -1
saveinithistory = 1


[cccam]
port = 2222
version = 2.1.4
reshare = 1


[webif]
httpport = 83
httprefresh = 10
httpallowed = 192.168.0.0-192.168.255.255

ich habe gerade die berechtigungen mal auf 777 gesetzt bei der Datei und starte jetzt durch.
 
AW: Probleme mit V14

So beim ersten starten von oscam nach dem reboot:

Code: 
rm: can't remove '/dev/ttyUSB1': No such file or directoryrm: can't remove '/dev/ttyUSB2': No such file or directory
rm: can't remove '/dev/ttyUSB3': No such file or directory
rm: can't remove '/dev/ttyUSB4': No such file or directory
rm: can't remove '/dev/ttyUSB5': No such file or directory
rm: can't remove '/dev/ttyUSB6': No such file or directory
rm: can't remove '/dev/ttyUSB7': No such file or directory
rm: can't remove '/dev/ttyUSB8': No such file or directory
rm: can't remove '/dev/ttyUSB9': No such file or directory
/mod/etc/init.d/rc.oscam: line 100: /var/InternerSpeicher/cs/oscam/oscam: not found
/mod/etc/init.d/rc.oscam: line 100: /var/media/ftp/watchdog/oscam/card-init-error.sh: not found Starte oscam...

einer eine idee?
 
AW: Probleme mit V14

Das sieht eher nach einem Freetz Problem aus. Evtl. mal da nachforschen.


Gesendet von meiner Handquetsche
 
AW: Probleme mit V14

Ok alles auf anfang.
Soweit laeuft die büchse nun. Ich kann auch auf die logfiles zugreifen.
Allerdings bekomm ich keine EMMs zum server gesendet. Klappt das mit ACamD nicht?

Gesendet von meinem GT-I9100
 
AW: Probleme mit V14

Mit Acamd können mit korrekten Einstellungen EMMs zu einem oscam Server gesendet werden.

Nur solltest du mehr Infos geben (configs, Logs), damit dir konkreter geholfen werden kann.
 
AW: Probleme mit V14

Hallo, ich habe mittlerweile alles neu aufgesetzt. Allerdings erkennt nun OSCAM (oder der Reader /Smargo V2) die Karte nicht mehr.
Gibt es noch besondere Einstellungen die gesetzt werden müssen bei der Kombination aus V14 + Smargo V2 ?

oscam.log
Code: 
-------------------------------------------------------------------------------
>> OSCam <<  cardserver log switched at Wed Feb  4 13:54:55 2015
-------------------------------------------------------------------------------
2015/02/04 13:54:55        0 s     (main) waiting for local card init
2015/02/04 13:54:55        0   >> OSCam <<  cardserver log switched, version 1.20-unstable_svn, build r10398 (mips-linux-uclibc-libusb)
2015/02/04 13:54:55   534C48 r   (reader) Sky-V14 [smartreader] Reader initialized (device=SRv2;Serial:XXX, detect=cd, mhz= AUTO, cardmhz=369)
2015/02/04 13:54:56   534C48 r   (reader) Sky-V14 [smartreader] card detected
2015/02/04 13:55:03   534C48 r   (reader) Sky-V14 [smartreader] Error activating card.
2015/02/04 13:55:15   534C48 r        (-) -- Skipped 1 duplicated log lines --
2015/02/04 13:55:15   534C48 r   (reader) Sky-V14 [smartreader] ATR: 3F 03 40 57 5B 
2015/02/04 13:55:15   534C48 r   (reader) Sky-V14 [smartreader] Init card protocol T0, FI=1, F=372, D=1, N=0
2015/02/04 13:55:15   534C48 r   (reader) Sky-V14 [smartreader] Calculated work ETU is 69.66 us reader mhz = 534
2015/02/04 13:55:15   534C48 r   (reader) Sky-V14 [smartreader] Effective reader settings mhz =534 F= 372 D= 1 N=0 T=0 inv=1 parity=ODD
2015/02/04 13:55:16   534C48 r   (reader) Sky-V14 [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
2015/02/04 13:55:17   534C48 r   (reader) Sky-V14 [smartreader] card system not supported
2015/02/04 13:55:17   534C48 r   (reader) Sky-V14 [smartreader] Normal mode failed, reverting to Deprecated Mode
2015/02/04 13:55:20   534C48 r   (reader) Sky-V14 [smartreader] ATR: 3F 03 40 57 5B 
2015/02/04 13:55:20   534C48 r   (reader) Sky-V14 [smartreader] Init card protocol T0, FI=1, F=372, D=1, N=0
2015/02/04 13:55:20   534C48 r   (reader) Sky-V14 [smartreader] Calculated work ETU is 69.66 us reader mhz = 534
2015/02/04 13:55:20   534C48 r   (reader) Sky-V14 [smartreader] Effective reader settings mhz =534 F= 372 D= 1 N=0 T=0 inv=1 parity=ODD
2015/02/04 13:55:21   534C48 r   (reader) Sky-V14 [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
2015/02/04 13:55:22   534C48 r   (reader) Sky-V14 [smartreader] card system not supported
2015/02/04 13:55:22   534C48 r   (reader) Sky-V14 [smartreader] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/02/04 13:55:22   534C48 r   (reader) Sky-V14 [smartreader] card initializing error
2015/02/04 13:55:23        0 s     (main) init for all local cards done
2015/02/04 13:55:23        0 s (anticasc) anti cascading disabled

oscam.server
Code: 
[reader]
label = Sky-V14
protocol = smartreader
device = SRv2;Serial:XXX
services = 
smargopatch = 1
caid = 098C
boxid = 12345678
detect = cd
mhz = 534
cardmhz = 369
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
blockemm-bylen = 1-31,36,38,40-41,65-72,74-124,126,128-129,131,141-255
ndsversion  = 2
 
Zuletzt bearbeitet von einem Moderator:
AW: Probleme mit V14

Wieso hast du deinen Reader geändert?

Auf der ersten Seite hattest du in der oscam.server bereits einen funktionsfähigen gepostet.
Nimm den und starte die Fritte komplett neu, nicht nur oscam.

Danach erneut oscam.log posten

Übrigens die Serial des Smartreaders brauchst du nicht unkenntlich zu machen, da die mit dem smartreader tool jederzeit geändert werden und auch sonst keiner etwas damit anfangen kann.
Oder hast du dort tatsächlich XXX drin stehen?
 
AW: Probleme mit V14

Ich habe in der Zwischenzeit ein wenig herumprobiert, daher die Änderungen.

Deine Vorschläge habe ich nun umgesetzt und die "erste" config geladen, sowie die fritte neu gestartet.
Anbei die Logfile.

Nein "XXX" steht da nicht drin, hatte das nur im Hinterkopf mit dem herausnehmen. Aber das bezog sich auf die V1 oder?
Deine Argumentation ist schon schlüssig.

Alternativ habe ich auch noch einen Original SmargoV1. Ist dieser vielleicht "besser" für das vorhaben?

Code: 
-------------------------------------------------------------------------------
>> OSCam <<  cardserver started at Wed Feb  4 15:02:52 2015
-------------------------------------------------------------------------------
2015/02/04 15:02:52        0 s >> OSCam <<  cardserver started, version 1.20-unstable_svn, build r10398 (mips-linux-uclibc-libusb)
2015/02/04 15:02:52        0 s     (main) System name    = Linux
2015/02/04 15:02:52        0 s     (main) Host name      = Sharebox
2015/02/04 15:02:52        0 s     (main) Release        = 2.6.28.10
2015/02/04 15:02:52        0 s     (main) Version        = #1 Tue Dec 2 09:58:44 CET 2014
2015/02/04 15:02:52        0 s     (main) Machine        = mips
2015/02/04 15:02:52        0 s     (main) creating pidfile /tmp/.oscam/oscam.pid with pid 5473
2015/02/04 15:02:52        0 s   (config) services reloaded: 0 services freed, 0 services loaded, rejected 0
2015/02/04 15:02:52        0 s   (config) userdb reloaded: 4 accounts loaded, 0 expired, 0 disabled
2015/02/04 15:02:52        0 s     (main) signal handling initialized
2015/02/04 15:02:52        0 s      (net) cccam: initialized (fd=4, port=5454)
2015/02/04 15:02:53   528A98 h    (webif) webif: decompressed 152111 bytes back into 359324 bytes
2015/02/04 15:02:53   528A98 h    (webif) HTTP Server running. ip=0.0.0.0 port=83
2015/02/04 15:02:53        0 s   (reader) Sky-V14 [smartreader] creating thread for device SRv2;Serial:Phoenix
2015/02/04 15:02:53        0 s     (stat) loadbalancer: can't read from file /tmp/.oscam/stat
2015/02/04 15:02:53        0 s     (main) waiting for local card init
2015/02/04 15:02:53   534C48 r   (reader) Sky-V14 [smartreader] Reader initialized (device=SRv2;Serial:Phoenix, detect=cd, mhz=369, cardmhz=369)
2015/02/04 15:02:53   534C48 r   (reader) Sky-V14 [smartreader] card detected
2015/02/04 15:03:00   534C48 r   (reader) Sky-V14 [smartreader] Error activating card.
2015/02/04 15:03:04   534C48 r   (reader) Sky-V14 [smartreader] ATR: 3F 03 40 57 5B 
2015/02/04 15:03:04   534C48 r   (reader) Sky-V14 [smartreader] Init card protocol T0, FI=1, F=372, D=1, N=0
2015/02/04 15:03:04   534C48 r   (reader) Sky-V14 [smartreader] Calculated work ETU is 100.81 us reader mhz = 369
2015/02/04 15:03:04   534C48 r   (reader) Sky-V14 [smartreader] Effective reader settings mhz =369 F= 372 D= 1 N=0 T=0 inv=1 parity=ODD
2015/02/04 15:03:05   534C48 r   (reader) Sky-V14 [smartreader] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.69 MHz (specified in reader->mhz)
2015/02/04 15:03:06   534C48 r   (reader) Sky-V14 [smartreader] card system not supported
2015/02/04 15:03:06   534C48 r   (reader) Sky-V14 [smartreader] Normal mode failed, reverting to Deprecated Mode
2015/02/04 15:03:09   534C48 r   (reader) Sky-V14 [smartreader] ATR: 3F 03 40 57 5B 
2015/02/04 15:03:09   534C48 r   (reader) Sky-V14 [smartreader] Init card protocol T0, FI=1, F=372, D=1, N=0
2015/02/04 15:03:09   534C48 r   (reader) Sky-V14 [smartreader] Calculated work ETU is 100.81 us reader mhz = 369
2015/02/04 15:03:09   534C48 r   (reader) Sky-V14 [smartreader] Effective reader settings mhz =369 F= 372 D= 1 N=0 T=0 inv=1 parity=ODD
2015/02/04 15:03:10   534C48 r   (reader) Sky-V14 [smartreader] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.69 MHz (specified in reader->mhz)
2015/02/04 15:03:11   534C48 r   (reader) Sky-V14 [smartreader] card system not supported
2015/02/04 15:03:11   534C48 r   (reader) Sky-V14 [smartreader] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/02/04 15:03:11   534C48 r   (reader) Sky-V14 [smartreader] card initializing error
2015/02/04 15:03:11        0 s     (main) init for all local cards done
2015/02/04 15:03:11        0 s (anticasc) anti cascading disabled
 
Zuletzt bearbeitet von einem Moderator:
Der Smargo V1 ist auf jeden Fall dem V2 vorzuziehen.
Die ECM Zeiten beim V2 sind recht schlecht, daher solltest du den V1 nehmen

Ändere das erstmal. Deine Karte wird im V2 nicht gelesen. Da stimmt etwas mit der Taktung nicht.

Gesendet von meiner Handquetsche
 
Ok ist erledigt, gibt es noch Änderungen die ich in der oscam.server config ändern muss für den V1?

Ok er scheint die Karte nun zu erkennen mit dem V1.

Seh ich das richtig, das die Karte korrekt erkannt wird und ich die Karte nun mit dem EMMs aktivieren muss?


*EDIT*
Soweit so gut, ich habe nun den Client schon ca 15 Minuten am Server conected via ACamD. Bisher seh ich in den Logs keine Einträge um die Karte zu Aktivieren. Beim KC habe ich mir gestern das Freischaltsignal senden lassen.
Code: 
-------------------------------------------------------------------------------
>> OSCam <<  cardserver started at Wed Feb  4 21:05:57 2015
-------------------------------------------------------------------------------
2015/02/04 21:05:57        0 s >> OSCam <<  cardserver started, version 1.20-unstable_svn, build r10398 (mips-linux-uclibc-libusb)
2015/02/04 21:05:57        0 s     (main) System name    = Linux
2015/02/04 21:05:57        0 s     (main) Host name      = Sharebox
2015/02/04 21:05:57        0 s     (main) Release        = 2.6.28.10
2015/02/04 21:05:57        0 s     (main) Version        = #1 Tue Dec 2 09:58:44 CET 2014
2015/02/04 21:05:57        0 s     (main) Machine        = mips
2015/02/04 21:05:57        0 s     (main) creating pidfile /tmp/.oscam/oscam.pid with pid 11287
2015/02/04 21:05:57        0 s   (config) services reloaded: 0 services freed, 0 services loaded, rejected 0
2015/02/04 21:05:57        0 s   (config) userdb reloaded: 4 accounts loaded, 0 expired, 0 disabled
2015/02/04 21:05:57        0 s     (main) signal handling initialized
2015/02/04 21:05:57        0 s      (net) cccam: initialized (fd=4, port=5454)
2015/02/04 21:05:57        0 s   (reader) Sky-V14 [smartreader] creating thread for device Serial:Reader 43C3546
2015/02/04 21:05:57   52A890 h    (webif) webif: decompressed 152111 bytes back into 359324 bytes
2015/02/04 21:05:57   52A890 h    (webif) HTTP Server running. ip=0.0.0.0 port=83
2015/02/04 21:05:57        0 s     (stat) loadbalancer: can't read from file /tmp/.oscam/stat
2015/02/04 21:05:57        0 s     (main) waiting for local card init
2015/02/04 21:05:57   528A98 r   (reader) Sky-V14 [smartreader] Reader initialized (device=Serial:Reader 43C3546, detect=cd, mhz=369, cardmhz=369)
2015/02/04 21:05:58   528A98 r   (reader) Sky-V14 [smartreader] card detected
2015/02/04 21:06:01   528A98 r   (reader) Sky-V14 [smartreader] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03 
2015/02/04 21:06:01   528A98 r   (reader) Sky-V14 [smartreader] Init card protocol T0, FI=1, F=372, D=16, N=2
2015/02/04 21:06:01   528A98 r   (reader) Sky-V14 [smartreader] Calculated work ETU is 6.30 us reader mhz = 369
2015/02/04 21:06:01   528A98 r   (reader) Sky-V14 [smartreader] Effective reader settings mhz =369 F= 372 D= 16 N=2 T=0 inv=1 parity=ODD
2015/02/04 21:06:02   528A98 r   (reader) Sky-V14 [smartreader] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.69 MHz (specified in reader->mhz)
2015/02/04 21:06:03   528A98 r   (reader) Sky-V14 [smartreader] Card type:   P1TV
2015/02/04 21:06:03   528A98 r   (reader) Sky-V14 [smartreader] Rom version: 20AA
2015/02/04 21:06:03   528A98 r   (reader) Sky-V14 [smartreader] Credit available on card: 0 euro
2015/02/04 21:06:03   528A98 r   (reader) Sky-V14 [smartreader] Extended 4C detected
2015/02/04 21:06:03   528A98 r   (reader) Sky-V14 [smartreader] FuseByte: 00
2015/02/04 21:06:03   528A98 r   (reader) Sky-V14 [smartreader] Region Code: 
2015/02/04 21:06:03   528A98 r   (reader) Sky-V14 [smartreader] Country Code: DEU
2015/02/04 21:06:03   528A98 r   (reader) Sky-V14 [smartreader] Pincode read: 7892
2015/02/04 21:06:03   528A98 r   (reader) Sky-V14 [smartreader] PCB settings: FF FF FF FF
2015/02/04 21:06:03   528A98 r   (reader) Sky-V14 [smartreader] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2015/02/04 21:06:03   528A98 r   (reader) Sky-V14 [smartreader] serial: ########, BoxID: ########, baseyear: 2004
2015/02/04 21:06:03   528A98 r   (reader) Sky-V14 [smartreader] ready for requests
2015/02/04 21:06:03   528A98 r   (reader) Sky-V14 [smartreader] found card system videoguard2
2015/02/04 21:06:03   528A98 r   (reader) Sky-V14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No  1 out of max alloted of 1
2015/02/04 21:06:03   528A98 r   (reader) Sky-V14 [videoguard2] card detected
2015/02/04 21:06:03   528A98 r   (reader) Sky-V14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/02/04 21:06:03   528A98 r   (reader) Sky-V14 [videoguard2] ------------------------------------------------------------------
2015/02/04 21:06:03   528A98 r   (reader) Sky-V14 [videoguard2] |- class -|-- tier --|----- valid to ------|--- package name ----|
2015/02/04 21:06:03   528A98 r   (reader) Sky-V14 [videoguard2] +---------+----------+---------------------+---------------------+
2015/02/04 21:06:03   528A98 r   (reader) Sky-V14 [videoguard2] |------- This card is not active, so no package available! ------|
2015/02/04 21:06:03   528A98 r   (reader) Sky-V14 [videoguard2] ------------------------------------------------------from-ins70--
2015/02/04 21:06:04        0 s     (main) init for all local cards done
2015/02/04 21:06:04        0 s (anticasc) anti cascading disabled
2015/02/04 21:21:16   53E400 c   (client) encrypted cccam-client 192.168.178.40 granted (Client1, au=off)
2015/02/04 21:21:24   528A98 r        (-) -- Skipped 1 duplicated log lines --
2015/02/04 21:21:24   528A98 r   (reader) Sky-V14 [videoguard2] classD3 ins54: no cw --> Card isn't active
2015/02/04 21:21:24   528A98 r   (reader) Sky-V14 [videoguard2] classD3 ins54: no cw --> Card needs pairing/extra data
2015/02/04 21:21:24   528A98 r   (reader) Sky-V14 [videoguard2] classD3 ins54: no cw --> No tier found
2015/02/04 21:21:24   528A98 r   (reader) Sky-V14 [videoguard2] classD3 ins54: no cw --> Tier expired
2015/02/04 21:21:24   53E400 c      (ecm) Client1 (098C&000000/0C20/00F2/98:9FA990C746F45FFA1661F2250F97DC9C): not found (77 ms) by Sky-V14
2015/02/04 21:21:24   53E400 c      (ecm) Client1 (098C&000000/0C20/00F2/98:9FA990C746F45FFA1661F2250F97DC9C): not found (1 ms) by Sky-V14
2015/02/04 21:25:47   53E400 c        (-) -- Skipped 4 duplicated log lines --
2015/02/04 21:25:47   53E400 c   (client) Client1 disconnected from 192.168.178.40
2015/02/04 21:30:08   53E400 c        (-) -- Skipped 1 duplicated log lines --
2015/02/04 21:30:08   53E400 c   (client) encrypted cccam-client 192.168.178.40 granted (Client1, au=off)
2015/02/04 21:30:10   528A98 r        (-) -- Skipped 1 duplicated log lines --
2015/02/04 21:30:10   528A98 r   (reader) Sky-V14 [videoguard2] classD3 ins54: no cw --> Card isn't active
2015/02/04 21:30:10   528A98 r   (reader) Sky-V14 [videoguard2] classD3 ins54: no cw --> Card needs pairing/extra data
2015/02/04 21:30:10   528A98 r   (reader) Sky-V14 [videoguard2] classD3 ins54: no cw --> No tier found
2015/02/04 21:30:10   528A98 r   (reader) Sky-V14 [videoguard2] classD3 ins54: no cw --> Tier expired
2015/02/04 21:30:10   541C68 c      (ecm) Client1 (098C&000000/0C20/00F2/98:29AAA5F5A024F368F3C7D3AB16565690): not found (62 ms) by Sky-V14
2015/02/04 21:30:11   528A98 r   (reader) Sky-V14 [videoguard2] classD3 ins54: no cw --> Card isn't active
2015/02/04 21:30:11   528A98 r   (reader) Sky-V14 [videoguard2] classD3 ins54: no cw --> Card needs pairing/extra data
2015/02/04 21:30:11   528A98 r   (reader) Sky-V14 [videoguard2] classD3 ins54: no cw --> No tier found
2015/02/04 21:30:11   528A98 r   (reader) Sky-V14 [videoguard2] classD3 ins54: no cw --> Tier expired
2015/02/04 21:30:11   53E400 c      (ecm) Client1 (098C&000000/0C20/00F2/98:8D706B451FB2018504CD9988013CFBC6): not found (60 ms) by Sky-V14
 
Zuletzt bearbeitet von einem Moderator:
AW: Probleme mit V14

ich dreh langsam am Rad, finde den Fehler nicht :-(
Der Client sendet einfach keine EMM´s an die Fritte (OSCAM) um die Karte zu aktivieren.
Probiert habe ich es mit ACamD sowie Hadu (Anbei auch die Configs).

hadu.ini
Code: 
[General]
PluginActive=1
KeyPath2=
UseTransparency=1
[Options]
UsePSITables=1
SurveyPMT=1
UsePATforPMT=0
DontUpdViewer=0
MaxECMPIDs=0
MaxConnections=0
DisplayIPorURL=1
ECMTimeout=3
MaxCAIDLoops=4
DCWsOneServ=1
LogMessages=1
LogMessLevel=2
EMMAlone=1
EMMFaked=0
EMMLog=0
DispAllEMMs=0
CacheUse=1
CacheUpdate=1
ManualUse=0
Systray=0


[Specific]
DVBViewerAPI=0
DVBViewerAllAudio=1
DVBViewerCSAStat=0
DVBViewerRecServ=0
DVBViewerIdleServ=0
DVBViewerEncrServ=0


[Device]
MDRoot=0
DescrCommand=
XorEven=
XorOdd=
UseTT=0


[Serv_DVBKING]
Server=CCCam:192.168.178.20:2222:1:Client1:frassword
Active=1
EMMCAID=098C
PrioCAIDProv=098C
OSCAMPartner=1
OSCAMExt=1
OSCAMSID=1
acamd.ini / cardclient.conf
Code: 
[ACamd]
ShowMonitor=1
ReadCAT=1
SplitECM=1
DisableEcmCache=0
DisplayCCcamNShare=0
MultiEcm=0
ReadPMT=1
UseChCacheIni=0
UseCHIDCacheIni=0
Only184=1
DisKeyDelay=0
ReadPmtFile=1
AutoSearch=1
DecryptAll=1
DCWTweak=0
DisableDCWCache=0
DisplayFilterActions=1
DeleteUnusedEcm=1
Active=1
FilterSeca2=0
FilterSeca3=0
DisableClientOnBadConnection=0
LockOnConnectionId=1
CCcamN_ECMTimeout2=4
DisableEmmCache=1


cardclient.conf


newcamd:192.168.178.20:3333:1/0000/0000:Client1:frassword:0102030405060708091011121314
#cccamn:192.168.178.20:2222:1/0000/0000:Client1:frassword:1:5
oscam.conf
Code: 
[global]
logfile = /var/tbmodlog/oscam.log
disablelog = 0
nice = -1

[cccam]
port = 2222
version = 2.1.4
reshare = 1

[newcamd]
port = 3333@098C:000000
key = 0102030405060708091011121314
keepalive = 1


[webif]
httpport = 83
httprefresh = 10
httpallowed = 192.168.0.0-192.168.255.255
oscam.server
Code: 
[reader]
label = V14
protocol = smartreader
device = Serial:Reader 43C3546
services = 
smargopatch = 1
caid = 098C
boxid = 12345678
detect = cd
mhz = 534
cardmhz = 369
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
blockemm-bylen = 1-31,36,38,40-41,65-72,74-124,126,128-129,131,141-255
ndsversion  = 2
oscam.user
Code: 
[account]
user = Client1
pwd = frassword
description = PC Dachboden
au = V14
group = 1
disabled = 0
oscam.log (mit cccamn)
Code: 
-------------------------------------------------------------------------------
>> OSCam <<  cardserver started at Mon Feb  9 09:59:52 2015
-------------------------------------------------------------------------------
2015/02/09 09:59:52        0 s >> OSCam <<  cardserver started, version 1.20-unstable_svn, build r10398 (mips-linux-uclibc-libusb)
2015/02/09 09:59:52        0 s     (main) System name    = Linux
2015/02/09 09:59:52        0 s     (main) Host name      = Sharebox
2015/02/09 09:59:52        0 s     (main) Release        = 2.6.28.10
2015/02/09 09:59:52        0 s     (main) Version        = #1 Tue Dec 2 09:58:44 CET 2014
2015/02/09 09:59:52        0 s     (main) Machine        = mips
2015/02/09 09:59:52        0 s     (main) creating pidfile /tmp/.oscam/oscam.pid with pid 5302
2015/02/09 09:59:52        0 s   (config) services reloaded: 0 services freed, 0 services loaded, rejected 0
2015/02/09 09:59:52        0 s   (config) userdb reloaded: 4 accounts loaded, 0 expired, 3 disabled
2015/02/09 09:59:52        0 s     (main) signal handling initialized
2015/02/09 09:59:52        0 s   (config) 194 service-id's loaded in 4 ms
2015/02/09 09:59:52        0 s      (net) newcamd: initialized (fd=4, port=3333)
2015/02/09 09:59:52        0 s      (net) -> CAID: 098C PROVID: 000000
2015/02/09 09:59:52        0 s      (net) cccam: initialized (fd=5, port=2222)
2015/02/09 09:59:52        0 s   (reader) V14 [smartreader] creating thread for device Serial:Reader 43C3546
2015/02/09 09:59:52        0 s     (stat) loadbalancer: can't read from file /tmp/.oscam/stat
2015/02/09 09:59:52        0 s     (main) waiting for local card init
2015/02/09 09:59:52   52B660 h    (webif) webif: decompressed 152111 bytes back into 359324 bytes
2015/02/09 09:59:52   52B660 h    (webif) HTTP Server running. ip=0.0.0.0 port=83
2015/02/09 09:59:52   529868 r   (reader) V14 [smartreader] Reader initialized (device=Serial:Reader 43C3546, detect=cd, mhz= AUTO, cardmhz=369)
2015/02/09 09:59:53   529868 r   (reader) V14 [smartreader] card detected
2015/02/09 09:59:56   529868 r   (reader) V14 [smartreader] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03 
2015/02/09 09:59:56   529868 r   (reader) V14 [smartreader] Init card protocol T0, FI=1, F=372, D=16, N=2
2015/02/09 09:59:56   529868 r   (reader) V14 [smartreader] Calculated work ETU is 4.35 us reader mhz = 534
2015/02/09 09:59:56   529868 r   (reader) V14 [smartreader] Effective reader settings mhz =534 F= 372 D= 16 N=2 T=0 inv=1 parity=ODD
2015/02/09 09:59:57   529868 r   (reader) V14 [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
2015/02/09 09:59:58   529868 r   (reader) V14 [smartreader] Card type:   P1TV
2015/02/09 09:59:58   529868 r   (reader) V14 [smartreader] Rom version: 20AA
2015/02/09 09:59:58   529868 r   (reader) V14 [smartreader] Credit available on card: 0 euro
2015/02/09 09:59:58   529868 r   (reader) V14 [smartreader] Extended 4C detected
2015/02/09 09:59:58   529868 r   (reader) V14 [smartreader] FuseByte: 00
2015/02/09 09:59:58   529868 r   (reader) V14 [smartreader] Region Code: 
2015/02/09 09:59:58   529868 r   (reader) V14 [smartreader] Country Code: DEU
2015/02/09 09:59:58   529868 r   (reader) V14 [smartreader] Pincode read: 7492
2015/02/09 09:59:58   529868 r   (reader) V14 [smartreader] PCB settings: FF FF FF FF
2015/02/09 09:59:58   529868 r   (reader) V14 [smartreader] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2015/02/09 09:59:58   529868 r   (reader) V14 [smartreader] serial: ########, BoxID: ########, baseyear: 2004
2015/02/09 09:59:58   529868 r   (reader) V14 [smartreader] ready for requests
2015/02/09 09:59:58   529868 r   (reader) V14 [smartreader] found card system videoguard2
2015/02/09 09:59:58   529868 r   (reader) V14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No  1 out of max alloted of 1
2015/02/09 09:59:58   529868 r   (reader) V14 [videoguard2] card detected
2015/02/09 09:59:58   529868 r   (reader) V14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/02/09 09:59:58   529868 r   (reader) V14 [videoguard2] ------------------------------------------------------------------
2015/02/09 09:59:58   529868 r   (reader) V14 [videoguard2] |- class -|-- tier --|----- valid to ------|--- package name ----|
2015/02/09 09:59:58   529868 r   (reader) V14 [videoguard2] +---------+----------+---------------------+---------------------+
2015/02/09 09:59:58   529868 r   (reader) V14 [videoguard2] |------- This card is not active, so no package available! ------|
2015/02/09 09:59:58   529868 r   (reader) V14 [videoguard2] ------------------------------------------------------from-ins70--
2015/02/09 09:59:59        0 s     (main) init for all local cards done
2015/02/09 09:59:59        0 s (anticasc) anti cascading disabled
2015/02/09 10:00:01   543EB0 c   (client) anonymous disconnected from 192.168.178.40
2015/02/09 10:00:08   54E8F8 c        (-) -- Skipped 1 duplicated log lines --
2015/02/09 10:00:08   54E8F8 c   (client) encrypted cccam-client 192.168.178.40 granted (Client1, au=on (1 reader))
2015/02/09 10:00:15   529868 r   (reader) V14 [videoguard2] classD3 ins54: no cw --> Card isn't active
2015/02/09 10:00:15   529868 r   (reader) V14 [videoguard2] classD3 ins54: no cw --> Card needs pairing/extra data
2015/02/09 10:00:15   529868 r   (reader) V14 [videoguard2] classD3 ins54: no cw --> No tier found
2015/02/09 10:00:15   529868 r   (reader) V14 [videoguard2] classD3 ins54: no cw --> Tier expired
2015/02/09 10:00:15   54E8F8 c      (ecm) Client1 (098C&000000/0259/0081/9B:E3BD43F6E30343DA618E7BAFABBFC0EA): not found (82 ms) by V14 - Sky Sport HD 1
oscam.log (mit newcamd)
Code: 
-------------------------------------------------------------------------------
>> OSCam <<  cardserver started at Mon Feb  9 10:09:12 2015
-------------------------------------------------------------------------------
2015/02/09 10:09:12        0 s >> OSCam <<  cardserver started, version 1.20-unstable_svn, build r10398 (mips-linux-uclibc-libusb)
2015/02/09 10:09:12        0 s        (-) -- Skipped 1 duplicated log lines --
2015/02/09 10:09:12        0 s     (main) System name    = Linux
2015/02/09 10:09:12        0 s     (main) Host name      = Sharebox
2015/02/09 10:09:12        0 s     (main) Release        = 2.6.28.10
2015/02/09 10:09:12        0 s     (main) Version        = #1 Tue Dec 2 09:58:44 CET 2014
2015/02/09 10:09:12        0 s     (main) Machine        = mips
2015/02/09 10:09:12        0 s     (main) creating pidfile /tmp/.oscam/oscam.pid with pid 7566
2015/02/09 10:09:12        0 s   (config) services reloaded: 0 services freed, 0 services loaded, rejected 0
2015/02/09 10:09:12        0 s   (config) userdb reloaded: 4 accounts loaded, 0 expired, 3 disabled
2015/02/09 10:09:12        0 s     (main) signal handling initialized
2015/02/09 10:09:12        0 s   (config) 194 service-id's loaded in 5 ms
2015/02/09 10:09:12        0 s      (net) newcamd: initialized (fd=4, port=3333)
2015/02/09 10:09:12        0 s      (net) -> CAID: 098C PROVID: 000000
2015/02/09 10:09:12        0 s      (net) cccam: initialized (fd=5, port=2222)
2015/02/09 10:09:12        0 s   (reader) V14 [smartreader] creating thread for device Serial:Reader 43C3546
2015/02/09 10:09:12        0 s     (stat) loadbalancer: can't read from file /tmp/.oscam/stat
2015/02/09 10:09:12        0 s     (main) waiting for local card init
2015/02/09 10:09:12   529868 h    (webif) webif: decompressed 152111 bytes back into 359324 bytes
2015/02/09 10:09:12   529868 h    (webif) HTTP Server running. ip=0.0.0.0 port=83
2015/02/09 10:09:12   53A1E8 r   (reader) V14 [smartreader] Reader initialized (device=Serial:Reader 43C3546, detect=cd, mhz= AUTO, cardmhz=369)
2015/02/09 10:09:13   53A1E8 r   (reader) V14 [smartreader] card detected
2015/02/09 10:09:17   53A1E8 r   (reader) V14 [smartreader] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03 
2015/02/09 10:09:17   53A1E8 r   (reader) V14 [smartreader] Init card protocol T0, FI=1, F=372, D=16, N=2
2015/02/09 10:09:17   53A1E8 r   (reader) V14 [smartreader] Calculated work ETU is 4.35 us reader mhz = 534
2015/02/09 10:09:17   53A1E8 r   (reader) V14 [smartreader] Effective reader settings mhz =534 F= 372 D= 16 N=2 T=0 inv=1 parity=ODD
2015/02/09 10:09:18   53A1E8 r   (reader) V14 [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
2015/02/09 10:09:19   53A1E8 r   (reader) V14 [smartreader] Card type:   P1TV
2015/02/09 10:09:19   53A1E8 r   (reader) V14 [smartreader] Rom version: 20AA
2015/02/09 10:09:19   53A1E8 r   (reader) V14 [smartreader] Credit available on card: 0 euro
2015/02/09 10:09:19   53A1E8 r   (reader) V14 [smartreader] Extended 4C detected
2015/02/09 10:09:19   53A1E8 r   (reader) V14 [smartreader] FuseByte: 00
2015/02/09 10:09:19   53A1E8 r   (reader) V14 [smartreader] Region Code: 
2015/02/09 10:09:19   53A1E8 r   (reader) V14 [smartreader] Country Code: DEU
2015/02/09 10:09:19   53A1E8 r   (reader) V14 [smartreader] Pincode read: 7492
2015/02/09 10:09:19   53A1E8 r   (reader) V14 [smartreader] PCB settings: FF FF FF FF
2015/02/09 10:09:19   53A1E8 r   (reader) V14 [smartreader] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2015/02/09 10:09:19   53A1E8 r   (reader) V14 [smartreader] serial: ########, BoxID: ########, baseyear: 2004
2015/02/09 10:09:19   53A1E8 r   (reader) V14 [smartreader] ready for requests
2015/02/09 10:09:19   53A1E8 r   (reader) V14 [smartreader] found card system videoguard2
2015/02/09 10:09:19   53A1E8 r   (reader) V14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No  1 out of max alloted of 1
2015/02/09 10:09:19   53A1E8 r   (reader) V14 [videoguard2] card detected
2015/02/09 10:09:19   53A1E8 r   (reader) V14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/02/09 10:09:19   53A1E8 r   (reader) V14 [videoguard2] ------------------------------------------------------------------
2015/02/09 10:09:19   53A1E8 r   (reader) V14 [videoguard2] |- class -|-- tier --|----- valid to ------|--- package name ----|
2015/02/09 10:09:19   53A1E8 r   (reader) V14 [videoguard2] +---------+----------+---------------------+---------------------+
2015/02/09 10:09:19   53A1E8 r   (reader) V14 [videoguard2] |------- This card is not active, so no package available! ------|
2015/02/09 10:09:19   53A1E8 r   (reader) V14 [videoguard2] ------------------------------------------------------from-ins70--
2015/02/09 10:09:20        0 s     (main) init for all local cards done
2015/02/09 10:09:20        0 s (anticasc) anti cascading disabled
2015/02/09 10:09:51   544E78 c  (newcamd) client connected to 3333 port
2015/02/09 10:09:52   544E78 c   (client) encrypted newcamd:3333-client 192.168.178.40 granted (Client1, au=on (1 reader))
2015/02/09 10:09:52   544E78 c  (newcamd) user Client1 authenticated successfully (ACamd)
2015/02/09 10:09:52   544E78 c  (newcamd) AU enabled for user Client1 on reader V14
 
AW: Probleme mit V14

Hi,

ich kenne mich mit acamd nicht aus, aber das würde ich mal testen

DisableEmmCache=0

Grüße
Bombail
 
Du musst dich einloggen oder registrieren, um hier zu antworten.

Ähnliche Themen

F
gelöst Probleme mit OSCAM und ORF
Antworten
5
Aufrufe
357
Frog0007
F
gelöst SRG 5.0 endgültig abgemeldet?
Antworten
10
Aufrufe
789
RuckZuck
R
gelöst oscam Debian x86 Linux - HD05 aktivieren/wird nicht hell
Antworten
5
Aufrufe
940
rk2000
R
G02 erneut dunkel
2 3
Antworten
32
Aufrufe
2K
Vigor
G
CS mit PI3B Probleme bei der Abfrage vom Client
Antworten
8
Aufrufe
684
gringo07
G
Menü
Anmelden
Registrieren
Für die Nutzung dieser Website sind Cookies erforderlich. Du musst diese akzeptieren, um die Website weiter nutzen zu können. Erfahre mehr…