Problem mit Elite HD Redlight

[Schmicer3]

Hallo,

hab seit gestern eine neue Redlight Elite HD mit 13 Sendern.

Da bei meiner DM7080 die 2 Kartenschächte bereits belegt sind arbeite ich mit einem USB-Hub und einem Smargo.

Meine oscam.server sieht so aus:

Spoiler: oscam.server

[reader]
label = redlight
description = redlight
protocol = smartreader
device = /dev/ttyUSB0
caid = 0500
ecmwhitelist = 0500@043800:35,37,5D,67,61,6B,75,66,7A,78,6C,70,71,76,2A,39,3E,43,46,48,4D,58,5C,69,6E
detect = cd
mhz = 500
cardmhz = 500
ident = 0500:043800
group = 4
emmcache = 1,3,2,0

Im webif schaltet die Oscam immer auf AUS und ich bekomm die Sender einfach nicht hell. Findet jemand den Fehler? Danke für eure Hilfe

 

[rolu2]

Bei dem eingestellten Device kannst du nicht das smartreaderprotokoll nehmen. Stell mal auf mouse um

Gesendet von meinem SM-A520F mit Tapatalk

 

[Schmicer3]

Hab ich gemacht. Leider immer noch dunkel

 

[rolu2]

Was sagt der Log ab OSCamstart?

 

[dodo83]

deine OScam Version unterstützt auch externe Reader?

cardreader_phoenix: yes
cardreader_smargo: yes
cardreader_smartreader: yes

 

[Schmicer3]

Ich nehme schon an, dass sie das tut, zumindest bisher. Ich verwende die Oscam 1.20 Version Modern 11378

Spoiler: log

2018/01/06 10:02:05 00000000 s (reader) redlight [mouse] creating thread for device /dev/ttyUSB0
2018/01/06 10:02:05 00000000 s (main) waiting for local card init
2018/01/06 10:02:05 00000000 (emu) INFO: FFDecsa parallel mode = 64
2018/01/06 10:02:05 47A714DB r (emu) Key file not found in: /var/tuxbox/config
2018/01/06 10:02:05 47A714DB r (emu) Reading key file: /var/keys/SoftCam.Key
2018/01/06 10:02:05 2D79408A h (webif) webif: decompressed 197679 bytes back into 471720 bytes
2018/01/06 10:02:05 2D79408A h (webif) HTTP Server running. ip=0.0.0.0 port=4444
2018/01/06 10:02:05 47A714DB r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2018/01/06 10:02:05 6F791C17 r (reader) redlight [mouse] Buffers readed 0 bytes total time_us 75161
2018/01/06 10:02:05 6F791C17 r (reader) redlight [mouse] Buffers readed 0 bytes total time_us 75154
2018/01/06 10:02:05 6F791C17 r (reader) redlight [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=500, cardmhz=500)
2018/01/06 10:02:06 41C63D25 r (reader) hd02 [internal] card detected
2018/01/06 10:02:06 58A096EF r (reader) sky [internal] card detected
2018/01/06 10:02:06 47A714DB r (reader) emulator [emu] card detected
2018/01/06 10:02:06 6F791C17 r (reader) redlight [mouse] card detected
2018/01/06 10:02:06 6F791C17 r (reader) redlight [mouse] Buffers readed 0 bytes total time_us 75150
2018/01/06 10:02:07 47A714DB r (reader) emulator [emu] found card system emu
2018/01/06 10:02:07 47A714DB r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2018/01/06 10:02:07 47A714DB r (emu) Key file not found in: /var/tuxbox/config
2018/01/06 10:02:07 47A714DB r (emu) Reading key file: /var/keys/SoftCam.Key
2018/01/06 10:02:07 6F791C17 r (reader) redlight [mouse] Buffers readed 0 bytes total time_us 75169

2018/01/06 10:02:08 6F791C17 r (reader) redlight [mouse] ATR: 3F 77 3F 77 18 00 00 C2 EB 41 02 6C
2018/01/06 10:02:08 6F791C17 r (reader) redlight [mouse] Buffers readed 0 bytes total time_us 75150
2018/01/06 10:02:08 6F791C17 r (reader) redlight [mouse] Warning: D=0 is invalid, forcing D=1
2018/01/06 10:02:08 6F791C17 r (reader) redlight [mouse] Init card protocol T0, FI=3, F=744, D=1, N=24
2018/01/06 10:02:08 6F791C17 r (reader) redlight [mouse] Setting baudrate to 6720 bps
2018/01/06 10:02:08 6F791C17 r (reader) redlight [mouse] Calculated work ETU is 148.80 us reader mhz = 500
2018/01/06 10:02:09 6F791C17 r (reader) redlight [mouse] Buffers readed 0 bytes total time_us 75156
2018/01/06 10:02:09 6F791C17 r (reader) redlight [mouse] ATR Fsmax is 8 MHz, clocking card to wanted user cardspeed off 5.00 MHz (specified in reader->mhz)

2018/01/06 10:02:10 6F791C17 r (reader) redlight [mouse] card system not supported
2018/01/06 10:02:10 6F791C17 r (reader) redlight [mouse] Normal mode failed, reverting to Deprecated Mode

2018/01/06 10:02:10 6F791C17 r (reader) redlight [mouse] Buffers readed 0 bytes total time_us 75510

2018/01/06 10:02:11 6F791C17 r (reader) redlight [mouse] Buffers readed 0 bytes total time_us 75141

2018/01/06 10:02:12 6F791C17 r (reader) redlight [mouse] ATR: 3F 77 3F 77 18 00 00 C2 EB 41 02 6C
2018/01/06 10:02:12 6F791C17 r (reader) redlight [mouse] Warning: D=0 is invalid, forcing D=1
2018/01/06 10:02:12 6F791C17 r (reader) redlight [mouse] Init card protocol T0, FI=3, F=744, D=1, N=24
2018/01/06 10:02:12 6F791C17 r (reader) redlight [mouse] Calculated work ETU is 74.40 us reader mhz = 500
2018/01/06 10:02:12 6F791C17 r (reader) redlight [mouse] Buffers readed 0 bytes total time_us 75273
2018/01/06 10:02:12 6F791C17 r (reader) redlight [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 5.00 MHz (specified in reader->mhz)
2018/01/06 10:02:13 6F791C17 r (reader) redlight [mouse] card system not supported
2018/01/06 10:02:13 6F791C17 r (reader) redlight [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2018/01/06 10:02:13 6F791C17 r (reader) redlight [mouse] card initializing error

 

[dodo83]

probiere mal andere MHZ/CARDMHZ Einstellungen
ich weiß nicht was da für den Smargo "am besten" ist

 

[Schmicer3]

Die Umstellung der mhz hat glaub ich geholfen.
mhz = 534
cardmhz = 2700

Läuft. Danke für die Hilfe,