Oscam /Cccam HD+

Diddi81 · 16. Februar 2011

Hallo versuche schon Tagelang HD+ in meiner Dream 500 HD hell zu bekommen aber sie läuft nur mit scam... Hoffe ihr könnt mir helfen:

oscam-svn4733-mips-tuxbox / Cccam 2.14

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Wed Feb 16 21:44:09 2011
-------------------------------------------------------------------------------
2011/02/16 21:44:09 2AAC6850 s >> OSCam << cardserver started version 1.00-unstable_svn, build #4733 (mips-tuxbox-linux)
2011/02/16 21:44:09 2AAC6850 s version=1.00-unstable_svn, build #4733, system=mips-tuxbox-linux, nice=-10
2011/02/16 21:44:09 2AAC6850 s client max. idle=30 sec, debug level=0
2011/02/16 21:44:09 2AAC6850 s max. logsize=100 Kb
2011/02/16 21:44:09 2AAC6850 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=600 ms
2011/02/16 21:44:09 2AAC6850 s auth size=4976
2011/02/16 21:44:09 2AAC6850 s services reloaded: 0 services freed, 1 services loaded
2011/02/16 21:44:09 2AAC6850 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/02/16 21:44:09 2AAC6850 s signal handling initialized (type=sysv)
2011/02/16 21:44:09 2AAC6850 s can't open file "/etc/tuxbox/config/oscam.srvid" (err=2), no service-id's loaded
2011/02/16 21:44:09 2AAC6850 s can't open file "/etc/tuxbox/config/oscam.tiers" (err=2), no tier-id's loaded
2011/02/16 21:44:09 2AAC6850 s can't open file "/etc/tuxbox/config/oscam.provid" (err=2), no provids's loaded
2011/02/16 21:44:09 2AAC6850 s can't open file "/etc/tuxbox/config/oscam.ird" (errno=2) irdeto guessing not loaded
2011/02/16 21:44:09 2AAC6850 s monitor: initialized (fd=7, port=988)
2011/02/16 21:44:09 2AAC6850 s camd33: disabled
2011/02/16 21:44:09 2AAC6850 s camd35: disabled
2011/02/16 21:44:09 2AAC6850 s cs378x: disabled
2011/02/16 21:44:09 2AAC6850 s newcamd: initialized (fd=8, port=34001, crypted)
2011/02/16 21:44:09 2AAC6850 s CAID: 1843
2011/02/16 21:44:09 2AAC6850 s provid #0: 003411
2011/02/16 21:44:09 2AAC6850 s provid #1: 008011
2011/02/16 21:44:09 2AAC6850 s cccam: disabled
2011/02/16 21:44:09 2AAC6850 s radegast: disabled
2011/02/16 21:44:09 2AAC6850 s http thread started
2011/02/16 21:44:09 2AAC6850 s creating thread for device /dev/sci0
2011/02/16 21:44:09 2AAC6850 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/02/16 21:44:09 2AAC6850 s waiting for local card init
2011/02/16 21:44:09 2BCCB4B0 h HTTP Server listening on port 8888
2011/02/16 21:44:09 2C4CB4B0 r reader thread started (thread=2C4CB4B0, label=hdplus, device=/dev/sci0, detect=cd, mhz=368, cardmhz=357)
2011/02/16 21:44:09 2C4CB4B0 r hdplus card detected
2011/02/16 21:44:10 2C4CB4B0 r ATR: 3F xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
2011/02/16 21:44:11 2C4CB4B0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz
2011/02/16 21:44:12 2C4CB4B0 r detect native nagra card
2011/02/16 21:44:13 2C4CB4B0 r -----------------------------------------
2011/02/16 21:44:13 2C4CB4B0 r |id |tier |valid from |valid to |
2011/02/16 21:44:13 2C4CB4B0 r +----+--------+------------+------------+
2011/02/16 21:44:13 2C4CB4B0 r |8011|0066 |2011/02/08 |2012/02/10 |
2011/02/16 21:44:13 2C4CB4B0 r |8011|0067 |2010/01/19 |2010/01/20 |
2011/02/16 21:44:13 2C4CB4B0 r -----------------------------------------
2011/02/16 21:44:17 2C4CB4B0 r card system not supported
2011/02/16 21:44:17 2C4CB4B0 r Normal mode failed, reverting to Deprecated Mode
2011/02/16 21:44:19 2C4CB4B0 r ATR: 3F XXXXXXXXXXXXXXXXXX
2011/02/16 21:44:20 2C4CB4B0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz
2011/02/16 21:44:22 2C4CB4B0 r detect native nagra card
2011/02/16 21:44:33 2C4CB4B0 r card system not supported
2011/02/16 21:44:33 2C4CB4B0 r card initializing error
2011/02/16 21:44:33 2AAC6850 s init for all local cards done
2011/02/16 21:44:33 2AAC6850 s anti cascading disabled
2011/02/16 21:44:33 2CCCB4B0 c plain dvbapi-client granted (anonymous, au=off)
2011/02/16 21:44:33 2CCCB4B0 c dvbapi: can't open priority file /etc/tuxbox/config/oscam.dvbapi
2011/02/16 21:44:35 2CCCB4B0 c dvbapi: [ADD PID 0] CAID: 1830 ECM_PID: 1AAA PROVID: 000000
2011/02/16 21:44:35 2CCCB4B0 c dvbapi: [ADD PID 1] CAID: 1843 ECM_PID: 19AA PROVID: 000000
2011/02/16 21:44:35 2CCCB4B0 c dvbapi: new program number: EF15 (1830:EF15 unknown)
2011/02/16 21:44:36 2CCCB4B0 c anonymous (1830&000000/EF15/92:5594): rejected group (601 ms) (of 0 avail 0) (no matching reader)
2011/02/16 21:44:36 2CCCB4B0 c dvbapi: try pids again #1
2011/02/16 21:44:36 2CCCB4B0 c anonymous (1843&000000/EF15/89:3B60): rejected group (601 ms) (of 0 avail 0) (no matching reader)
2011/02/16 21:44:37 2CCCB4B0 c anonymous (1830&000000/EF15/92:5594): rejected group (601 ms) (of 0 avail 0) (no matching reader)
2011/02/16 21:44:38 2CCCB4B0 c dvbapi: try pids again #2
2011/02/16 21:44:38 2CCCB4B0 c anonymous (1843&000000/EF15/89:3B60): rejected group (601 ms) (of 0 avail 0) (no matching reader)
2011/02/16 21:44:39 2CCCB4B0 c anonymous (1830&000000/EF15/92:5594): rejected group (601 ms) (of 0 avail 0) (no matching reader)
2011/02/16 21:44:39 2CCCB4B0 c dvbapi: try pids again #3
2011/02/16 21:44:39 2CCCB4B0 c dvbapi: can't decode channel
2011/02/16 21:44:39 2CCCB4B0 c anonymous (1843&000000/EF15/89:3B60): rejected group (601 ms) (of 0 avail 0) (no matching reader)

Das ATR habe ich weg ge Xt

conf.
[global]
logfile = /var/log/oscam.log
maxlogsize = 100
saveinithistory = 1
Nice = -10
ClientTimeout = 5
ClientMaxIdle = 30
CacheDelay = 600
BindWait = 20
ResolveDelay = 15
Sleep = 0
waitforcards = 1

[dvbapi]
enabled = 1
au = 1
user = HDplus
boxtype = dreambox

[webif]
httpport = 8888
httprefresh = 5
httpallowed = 127.0.0.1,192.168.178.1-192.168.178.255

[MONITOR]
Port = 988
MonLevel = 3
NoCrypt = 127.0.0.1

[newcamd]
Key = 0102030405060708091011121314
Port = 34001@1843:003411,008011

server:

[reader]
label = HDplus
Protocol = internal
detect = CD
device = /dev/sci0
services = hdplus
group = 1
emmcache = 1,3,2
n3_rsakey = Bxxxx5

n3_boxkey = AxxxxxC

mhz = 368
caid = 1843
ident = 1843:003411,008011

user:

[account]
user = hdplus
pwd = hdplus
group = 1
IDENT = 1843:003411
au = 1
CAID = 1843

so und hier die cccfg einträge:

N: 192.168.1.83 34000 user pass 1 2 3 4 5 6 7 8 9 10 11 12 13 14

N: 127.0.0.1 34001 hdplus hdplus 01 02 03 04 05 06 07 08 09 10 11 12 13 14 1

Die erste Line ist von ner 7020 aus nem anderen zimmer die öffnet mir sky ohne probleme. hd+ will einfach nicht. Für Ratschläge bin ich dankbar

szonic · 16. Februar 2011

AW: Oscam /Cccam HD+

Nimm mal den Eintrag aus der Server config:

mhz = 368

Grüsse
szonic

Diddi81 · 16. Februar 2011

danke für die schnelle Antwort, hat aber leider keine besserung gebracht.

mum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2011/02/16 22:10:53 2C4CB4B0 r detect native nagra card
2011/02/16 22:11:03 2C4CB4B0 r card system not supported
2011/02/16 22:11:03 2C4CB4B0 r card initializing error
2011/02/16 22:11:03 2AAC6850 s init for all local cards done
2011/02/16 22:11:03 2AAC6850 s anti cascading disabled
2011/02/16 22:11:03 2CCCB4B0 c plain dvbapi-client granted (anonymous, au=off)
2011/02/16 22:11:03 2CCCB4B0 c dvbapi: can't open priority file /var/tuxbox/config/oscam.dvbapi
2011/02/16 22:11:03 2D4CB4B0 c client connected to 34001 port
2011/02/16 22:11:03 2D4CB4B0 c Connection closed to client
2011/02/16 22:11:03 2D4CB4B0 c thread 2D4CB4B0 ended!
2011/02/16 22:11:09 2D4CB4B0 c client connected to 34001 port
2011/02/16 22:11:09 2D4CB4B0 c user dummy is trying to connect but doesnt exist ! (CCcam)
2011/02/16 22:11:09 2D4CB4B0 c plain newcamd-client 127.0.0.1 rejected (no such user)
2011/02/16 22:11:09 2D4CB4B0 c thread 2D4CB4B0 ended!
2011/02/16 22:11:16 2CCCB4B0 c dvbapi: [ADD PID 0] CAID: 1833 ECM_PID: 18BA PROVID: 000000
2011/02/16 22:11:16 2CCCB4B0 c dvbapi: [ADD PID 1] CAID: 1834 ECM_PID: 1CBA PROVID: 000000
2011/02/16 22:11:16 2CCCB4B0 c dvbapi: [ADD PID 2] CAID: 09C4 ECM_PID: 1BBA PROVID: 000000
2011/02/16 22:11:16 2CCCB4B0 c dvbapi: [ADD PID 3] CAID: 09C7 ECM_PID: 1DBA PROVID: 000000
2011/02/16 22:11:16 2CCCB4B0 c dvbapi: [ADD PID 4] CAID: 09AF ECM_PID: 1FBA PROVID: 000000
2011/02/16 22:11:16 2CCCB4B0 c dvbapi: [ADD PID 5] CAID: 1861 ECM_PID: 19BA PROVID: 000000
2011/02/16 22:11:16 2CCCB4B0 c dvbapi: new program number: 0081 (1833:0081 unknown)
2011/02/16 22:11:17 2CCCB4B0 c anonymous (1833&000000/0081/89:6783): rejected group (188 ms) (of 0 avail 0) (no matching reader)
2011/02/16 22:11:18 2CCCB4B0 c anonymous (1834&000000/0081/89:7767): rejected group (1600 ms) (of 0 avail 0) (no matching reader)
2011/02/16 22:11:19 2CCCB4B0 c anonymous (09C4&000000/0081/95:B3BF): rejected group (601 ms) (of 0 avail 0) (no matching reader)
2011/02/16 22:11:19 2D4CB4B0 c client connected to 34001 port
2011/02/16 22:11:19 2D4CB4B0 c user dummy is trying to connect but doesnt exist ! (CCcam)
2011/02/16 22:11:19 2D4CB4B0 c plain newcamd-client 127.0.0.1 rejected (no such user)
2011/02/16 22:11:19 2D4CB4B0 c thread 2D4CB4B0 ended!

Und wieso steht da drinne das user dummy conntecten will?! der existiert bei mir nicht :emoticon-0122-itwas

Superhansi · 17. Februar 2011

AW: Oscam /Cccam HD+

Mit den Fehlern in der config kann es auch nicht funktionieren.

[dvbapi]
enabled = 1
au = 1
user = HDplus <-- so heißt dein Reader! hier muß der User rein
boxtype = dreambox

[webif]
httpport = 8888
httprefresh = 5
httpallowed = 127.0.0.1,192.168.178.1-192.168.178.255

[MONITOR]
Port = 988
MonLevel = 3
NoCrypt = 127.0.0.1

[newcamd]
Key = 0102030405060708091011121314
Port = 34001@1843:003411,008011

server:

[reader]
label = HDplus
Protocol = internal
detect = CD
device = /dev/sci0
services = hdplus <-- das ist der USER-Name oder doch services?
group = 1
emmcache = 1,3,2
n3_rsakey = Bxxxx5 <-- "n3_" weglassen
n3_boxkey = AxxxxxC <-- "n3_" weglassen
mhz = 368
caid = 1843
ident = 1843:003411,008011

user:

[account]
user = hdplus <-- steht im Reader bei services oder ist es doch der User-Name
pwd = hdplus <-- steht im Reader bei services oder ist es doch der User-Name oder pw
group = 1
IDENT = 1843:003411 <--weglassen
au = 1 <-- in "au = HDplus" ändern (Name vom Reader)
CAID = 1843

Du kannst nicht einfach für jede Variable den Wert "hdplus" eingeben.
Benenne die Variablen eindeutig dann funzt es auch.
Beispiel:

[reader]
label = HDplus

user = user1
pwd = userpw1

services = plushd <-- muß auch in der oscam.services so heißen

Edit:
Falls auf der Dream neben OScam noch CCcam läuft mußt du natürlich dvbapi abschalten, es kann nur eine cam (OScam oder CCcam) dein Bild entschlüsseln.
Dvbapi ist nur bei OScam only zu verwenden.

Gruß Superhansi

Diddi81 · 17. Februar 2011

Genial genial genial :dance3:

Vielen Dank Superhans, habe die von dir angesprochenen Fehler behoben,
und siehe da es werde Licht!

Du glaubst nicht wie lange ich schon am rum doktoren war.

Also nochmals Vielen Dank :emoticon-0123-party

jbn1 · 8. September 2011

AW: Oscam /Cccam HD+

Hallo ich habe das Problem, das die HD+ Karte mit OSCAM erst nach Aktivierung durch SCAM für eine Weile funktioniert. Dann muss ich sie wieder über SCAM aktivieren. Das Freischaltsignal gelangt wohl nicht über OSCAM an die Karte. Was ist in der Konfig falsch?

.conf

[global]
nice = -1
WaitForCards = 1
preferlocalcards = 1
lb_mode = 1
lb_save = 150
logfile = /tmp/oscam.log
maxlogsize = 256
Saveinithistory = 1

[monitor]
port = 8889
nocrypt =
aulow = 30
hideclient_to = 0
monlevel = 4
appendchaninfo = 0

[newcamd]
port = 34000@1843:003411
key = 0102030405060708091011121314
allowed =
keepalive = 1
mgclient = 0

[webif]
httpport = 8888
httpuser = oscam
httppwd = oscam
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0
httpjsicons = 1

.server

[reader]
label = hdplus
enable = 1
protocol = internal
device = /dev/sci0
services =
caid = 1801:1843,1843
rsakey = xxxx
boxkey = xxxx
detect = cd
nagra_read = 1
mhz = 368
cardmhz = 368
ident =
group = 1
emmcache = 1,3,2
lb_weight = 100

.user

[account]
user = hdplus
pwd = *********
group = 1
monlevel = 4
au = hdplus
caid = 1843
ident = 1843:003411

[account]
user = mshdplus
pwd = ********
group = 1
monlevel = 4
au = hdplus
caid = 1843
ident = 1843:003411

mxer · 8. September 2011

AW: Oscam /Cccam HD+

Nimm mal die beiden Keys aus dem Post! Ersetze sie durch xxxx, fertig.
Kann Deine Oscam dvbapi? Steht in der oscam.version: dvbapi = yes ?
Wenn ja, dann in die oscam.dvbapi eintragen:
P:1843 1
I:1830

Wenn nein, dann oscam-Version updaten.

GTD Bastion · 8. September 2011

AW: Oscam /Cccam HD+

Pass den Reader an:

PHP:

[reader]
label                         = hdplus
enable                        = 1
protocol                      = internal
device                        = /dev/sci0
services                      =
caid                          = 1843
rsakey                        =xxx
boxkey                        = AxxxC
detect                        = cd
mhz                           = 368
cardmhz                       = 368
ident                         =
group                         = 1
emmcache                      = 1,3,2
lb_weight                     = 100

Oscam /Cccam HD+

Diddi81

Newbie

szonic

Diddi81

Newbie

Superhansi

Spezialist

Diddi81

Newbie

jbn1

Ist gelegentlich hier

mxer

GTD Bastion

Ähnliche Themen

Oscam /Cccam HD+

Newbie

Newbie

Spezialist

Newbie

Ist gelegentlich hier

Ähnliche Themen

Datenschutz & Transparenz

Datenschutz & Transparenz