Dies ist eine mobil optimierte Seite, die schnell lädt. Wenn Sie die Seite ohne Optimierung laden möchten, dann klicken Sie auf diesen Text.

ORF und Skylink-Karten werden nicht hell - Gigablue 800 UE Plus

    Nobody is reading this thread right now.
AW: ORF und Skylink-Karten werden nicht hell - Gigablue 800 UE Plus

da fragst du leider als profi den superanfänger :emoticon-0105-wink:
 
AW: ORF und Skylink-Karten werden nicht hell - Gigablue 800 UE Plus

oder mit RSA/BOXKEY
Code: 
[COLOR=#CC9966][FONT=Monaco]boxkey                        = 4FD3B1C6E406AA69
[/FONT][/COLOR][COLOR=#CC9966][FONT=Monaco]rsakey                        = 2598FE21A1CEF05BBC459F495FCE8F1E811B126FA8933D8DDB6480A93D43CFA7255F009E875814BECF53DA7610D675D20EEBA8A212F9079CBD1D2FAD65362B42[/FONT][/COLOR]
hat auch google ausgespuckt

im CW Mode sollte die aber so gehen
Code: 
[COLOR=#CECECE][FONT=Lucida Sans Unicode][reader][/FONT][/COLOR]
[COLOR=#CECECE][FONT=Lucida Sans Unicode]Label = SkyLink[/FONT][/COLOR]
[COLOR=#CECECE][FONT=Lucida Sans Unicode]Protocol = internal[/FONT][/COLOR]
[COLOR=#CECECE][FONT=Lucida Sans Unicode]Device = /dev/sci0[/FONT][/COLOR]
[COLOR=#CECECE][FONT=Lucida Sans Unicode]Mhz = 357[/FONT][/COLOR]
[COLOR=#CECECE][FONT=Lucida Sans Unicode]Detect = CD[/FONT][/COLOR]
[COLOR=#CECECE][FONT=Lucida Sans Unicode]Group = 2[/FONT][/COLOR]
[COLOR=#CECECE][FONT=Lucida Sans Unicode]caid = 0D96[/FONT][/COLOR]
[COLOR=#CECECE][FONT=Lucida Sans Unicode]ident = 0D96:000004[/FONT][/COLOR]
[COLOR=#CECECE][FONT=Lucida Sans Unicode]EMMCache = 1,3,2[/FONT][/COLOR]
laut google
ähnlich der ORF
Irdeto mit RSA/BOXKEY
Cw ohne und anderer Caid
 
AW: ORF und Skylink-Karten werden nicht hell - Gigablue 800 UE Plus

das ist mein logfile u was ich da so erkenne, mag er die karte noch immer nicht.

  • 2015/06/20 22:13:51 0 s (main) Stb model = gb800ueplus
  • 2015/06/20 22:13:51 0 s (main) Stb boxtype = gigablue
  • 2015/06/20 22:13:51 0 s (main) creating pidfile /tmp/oscam.pid with pid 12947
  • 2015/06/20 22:13:51 0 s (config) services reloaded: 0 services freed, 0 services loaded, rejected 0
  • 2015/06/20 22:13:51 0 s [Emu] oscam-emu version 713
  • 2015/06/20 22:13:51 0 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
  • 2015/06/20 22:13:51 0 s (main) signal handling initialized
  • 2015/06/20 22:13:51 0 s (config) 282 service-id's loaded in 9 ms
  • 2015/06/20 22:13:51 0 s (config) 87 tier-id's loaded
  • 2015/06/20 22:13:51 0 s (config) 14 provid's loaded
  • 2015/06/20 22:13:51 0 s (reader) orf [internal] creating thread for device /dev/sci1
  • 2015/06/20 22:13:51 0 s (reader) skylink_irdeto [internal] creating thread for device /dev/sci0
  • 2015/06/20 22:13:51 54C5A0 r (reader) orf [internal] Reader initialized (device=/dev/sci1, detect=cd, mhz=500, cardmhz=600)
  • 2015/06/20 22:13:51 54C5A0 r (reader) orf [internal] Reader sci internal, detected box type: gigablue
  • 2015/06/20 22:13:51 0 s (reader) emulator [emu] creating thread for device emulator
  • 2015/06/20 22:13:51 0 s (stat) loadbalancer: can't read from file /tmp/.oscam/stat
  • 2015/06/20 22:13:51 0 s (main) waiting for local card init
  • 2015/06/20 22:13:51 54CA70 r (reader) skylink_irdeto [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=600, cardmhz=600)
  • 2015/06/20 22:13:51 54CA70 r (reader) skylink_irdeto [internal] Reader sci internal, detected box type: gigablue
  • 2015/06/20 22:13:51 54D348 r key file not found in: /etc/tuxbox/config/oscam_gigablue
  • 2015/06/20 22:13:51 54D348 r key file not found in: /var/keys
  • 2015/06/20 22:13:51 54D348 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
  • 2015/06/20 22:13:51 76E00468 h (webif) webif: decompressed 193840 bytes back into 400864 bytes
  • 2015/06/20 22:13:51 76E00468 h (webif) HTTP Server running. ip=0.0.0.0 port=83
  • 2015/06/20 22:13:52 54D348 r (reader) emulator [emu] card detected
  • 2015/06/20 22:13:52 54CA70 r (reader) skylink_irdeto [internal] card detected
  • 2015/06/20 22:13:52 54C5A0 r (reader) orf [internal] card detected
  • 2015/06/20 22:13:52 54C5A0 r (reader) orf [internal] ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00
  • 2015/06/20 22:13:53 54D348 r (reader) emulator [emu] found card system emu
  • 2015/06/20 22:13:53 54D348 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
  • 2015/06/20 22:13:53 54D348 r key file not found in: /etc/tuxbox/config/oscam_gigablue
  • 2015/06/20 22:13:53 54D348 r key file not found in: /var/keys
  • 2015/06/20 22:13:57 54C5A0 r (reader) orf [internal] Buffers readed 0 bytes total time_us 4999701
  • 2015/06/20 22:13:57 54C5A0 r (reader) orf [internal] Init card protocol T0, FI=1, F=372, D=2, N=0
  • 2015/06/20 22:13:57 54C5A0 r (reader) orf [internal] Calculated work ETU is 37.20 us reader mhz = 500
  • 2015/06/20 22:14:02 54C5A0 r (reader) orf [internal] Buffers readed 0 bytes total time_us 5001578
  • 2015/06/20 22:14:02 54CA70 r (reader) skylink_irdeto [internal] ATR: 3B 9F 11 40 60 49 52 44 45 54 4F 20 41 43 53 20 56 36 2E 30
  • 2015/06/20 22:14:02 54CA70 r (reader) skylink_irdeto [internal] Init card protocol T0, FI=1, F=372, D=1, N=0
  • 2015/06/20 22:14:02 54CA70 r (reader) skylink_irdeto [internal] Calculated work ETU is 74.40 us reader mhz = 500
  • 2015/06/20 22:14:07 54CA70 r (reader) skylink_irdeto [internal] Buffers readed 0 bytes total time_us 4999594
  • 2015/06/20 22:14:07 54C5A0 r (reader) orf [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
  • 2015/06/20 22:14:08 54CA70 r (reader) skylink_irdeto [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
  • 2015/06/20 22:14:08 54C5A0 r (reader) orf [internal] card detected
  • 2015/06/20 22:14:08 54C5A0 r (reader) orf [internal] type: CryptoWorks
  • 2015/06/20 22:14:08 54C5A0 r (reader) orf [internal] type: CryptoWorks, caid: 0D95, ascii serial: #########, hex serial: ##########
  • 2015/06/20 22:14:09 54CA70 r (reader) skylink_irdeto [internal] Hist. Bytes: IRDETO ACS V6.0
  • 2015/06/20 22:14:09 54CA70 r (reader) skylink_irdeto [internal] detect irdeto card
  • 2015/06/20 22:14:09 54CA70 r (reader) skylink_irdeto [internal] WARNING: ACS57 card can require the CamKey from config
  • 2015/06/20 22:14:09 54CA70 r (reader) skylink_irdeto [internal] caid: 0624, acs: 0.06, country code: CZE
  • 2015/06/20 22:14:09 54CA70 r (reader) skylink_irdeto [internal] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
  • 2015/06/20 22:14:09 54C5A0 r (reader) orf [internal] issuer: CryptoWorks, id: 04, bios: v3, pin: unknown, mfid: 3F00
  • 2015/06/20 22:14:09 54C5A0 r (reader) orf [internal] providers: 4 (04,08,0C,10)
  • 2015/06/20 22:14:09 54C5A0 r (reader) orf [internal] found card system cryptoworks
  • 2015/06/20 22:14:09 54C5A0 r (reader) orf [cryptoworks] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
  • 2015/06/20 22:14:09 54CA70 r (reader) skylink_irdeto [internal] You have a bad Cam Key set
  • 2015/06/20 22:14:09 54CA70 r (reader) skylink_irdeto [internal] card system not supported
  • 2015/06/20 22:14:09 54CA70 r (reader) skylink_irdeto [internal] Normal mode failed, reverting to Deprecated Mode
  • 2015/06/20 22:14:09 54C5A0 r (reader) orf [cryptoworks] provider: 1, id: 04, name: Operator: FFFF
  • 2015/06/20 22:14:09 54C5A0 r (reader) orf [cryptoworks] chid: 000D, date: 2013/06/27 - 2013/07/27, name: Product 000D
  • 2015/06/20 22:14:09 54C5A0 r (reader) orf [cryptoworks] chid: 7FF7, date: 2015/06/20 - 2015/06/30, name: Product 7FF7
  • 2015/06/20 22:14:09 54C5A0 r (reader) orf [cryptoworks] chid: 0001, date: 2015/06/20 - 2016/02/25, name: Product 0001
  • 2015/06/20 22:14:09 54C5A0 r (reader) orf [cryptoworks] chid: 0002, date: 2015/06/15 - 2016/02/20, name: Product 0002
  • 2015/06/20 22:14:09 54C5A0 r (reader) orf [cryptoworks] chid: 7FFB, date: 2015/04/18 - 2015/05/18, name: Product 7FFB
  • 2015/06/20 22:14:09 54C5A0 r (reader) orf [cryptoworks] chid: FFE0, date: 2015/05/24 - 2016/01/29, name: Product FFE0
  • 2015/06/20 22:14:09 54C5A0 r (reader) orf [cryptoworks] chid: FFD8, date: 2014/02/23 - 2014/03/25, name: Product FFD8
  • 2015/06/20 22:14:09 54CA70 r (reader) skylink_irdeto [internal] ATR: 3B 9F 11 40 60 49 52 44 45 54 4F 20 41 43 53 20 56 36 2E 30
  • 2015/06/20 22:14:09 54CA70 r (reader) skylink_irdeto [internal] Init card protocol T0, FI=1, F=372, D=1, N=0
  • 2015/06/20 22:14:09 54CA70 r (reader) skylink_irdeto [internal] Calculated work ETU is 74.40 us reader mhz = 500
  • 2015/06/20 22:14:14 54CA70 r (reader) skylink_irdeto [internal] Buffers readed 0 bytes total time_us 5003618
  • 2015/06/20 22:14:14 54C5A0 r (reader) orf [cryptoworks] provider: 2, id: 08, name: Operator: FFFF
  • 2015/06/20 22:14:15 54C5A0 r (reader) orf [cryptoworks] chid: 001D, date: 2013/08/16 - 2013/11/16, name: Product 001D
  • 2015/06/20 22:14:15 54C5A0 r (reader) orf [cryptoworks] provider: 3, id: 0C, name: Operator: FFFF
  • 2015/06/20 22:14:15 54C5A0 r (reader) orf [cryptoworks] provider: 4, id: 10, name: Operator: FFFF
  • 2015/06/20 22:14:15 54C5A0 r (reader) orf [cryptoworks] chid: 0031, date: 2014/05/29 - 2014/08/29, name: Product 0031
  • 2015/06/20 22:14:15 54C5A0 r (reader) orf [cryptoworks] ready for requests
  • 2015/06/20 22:14:15 54CA70 r (reader) skylink_irdeto [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
  • 2015/06/20 22:14:16 54CA70 r (reader) skylink_irdeto [internal] Hist. Bytes: IRDETO ACS V6.0
  • 2015/06/20 22:14:16 54CA70 r (reader) skylink_irdeto [internal] detect irdeto card
  • 2015/06/20 22:14:16 54CA70 r (reader) skylink_irdeto [internal] WARNING: ACS57 card can require the CamKey from config
  • 2015/06/20 22:14:16 54CA70 r (reader) skylink_irdeto [internal] caid: 0624, acs: 0.06, country code: CZE
  • 2015/06/20 22:14:16 54CA70 r (reader) skylink_irdeto [internal] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
  • 2015/06/20 22:14:16 54CA70 r (reader) skylink_irdeto [internal] You have a bad Cam Key set
  • 2015/06/20 22:14:16 54CA70 r (reader) skylink_irdeto [internal] card system not supported
  • 2015/06/20 22:14:16 54CA70 r (reader) skylink_irdeto [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
  • 2015/06/20 22:14:16 54CA70 r (reader) skylink_irdeto [internal] card initializing error
  • 2015/06/20 22:14:17 0 s (main) init for all local cards done
  • 2015/06/20 22:14:17 0 s (emmcache) loaded 16 emmcache records from /tmp/.oscam/oscam.emmcache in 2 ms
  • 2015/06/20 22:14:17 0 s (emmcache) loaded 16 emmstat records from /tmp/.oscam/oscam.emmstat in 1 ms
  • 2015/06/20 22:14:17 0 s (anticasc) anti cascading disabled
  • 2015/06/20 22:14:17 54F1B8 c (client) plain dvbapi-client granted (gigablue, au=auto (3 reader))
  • 2015/06/20 22:14:17 54F1B8 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam_gigablue/oscam.ccache
  • 2015/06/20 22:14:17 54F1B8 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
  • 2015/06/20 22:14:22 54F1B8 c (dvbapi) Demuxer 0 found 0 ECMpids and 3 STREAMpids in PMT
  • 2015/06/20 22:14:22 54F1B8 c (dvbapi) Demuxer 0 receiver wants to demux srvid 708A on adapter 0000 camask 0001 index 0000 pmtpid 0190
  • 2015/06/20 22:14:22 54F1B8 c (dvbapi) Demuxer 0 new program number: 708A (FFFE:708A unknown) [pmt_list_management 3]

- - - - - - - - - -

edit: wo gebe ich diese daten vom letzten post ein?? auch beim "reader"?
 
so karte wird erkannt, aber "no entitlements" u ich hab auch was gelesen - im log - dass irdetokarten 600mhz im oscam.server haben sollten

  • 2015/06/20 22:18:48 0 s (main) Stb model = gb800ueplus
  • 2015/06/20 22:18:48 0 s (main) Stb boxtype = gigablue
  • 2015/06/20 22:18:48 0 s (main) creating pidfile /tmp/oscam.pid with pid 15617
  • 2015/06/20 22:18:48 0 s (config) services reloaded: 0 services freed, 0 services loaded, rejected 0
  • 2015/06/20 22:18:48 0 s [Emu] oscam-emu version 713
  • 2015/06/20 22:18:48 0 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
  • 2015/06/20 22:18:48 0 s (main) signal handling initialized
  • 2015/06/20 22:18:48 0 s (config) 282 service-id's loaded in 13 ms
  • 2015/06/20 22:18:48 0 s (config) 87 tier-id's loaded
  • 2015/06/20 22:18:48 0 s (config) 14 provid's loaded
  • 2015/06/20 22:18:48 0 s (reader) orf [internal] creating thread for device /dev/sci1
  • 2015/06/20 22:18:48 0 s (reader) skylink_irdeto [internal] creating thread for device /dev/sci0
  • 2015/06/20 22:18:48 0 s (reader) emulator [emu] creating thread for device emulator
  • 2015/06/20 22:18:48 54C5A0 r (reader) orf [internal] Reader initialized (device=/dev/sci1, detect=cd, mhz=500, cardmhz=600)
  • 2015/06/20 22:18:48 54C5A0 r (reader) orf [internal] Reader sci internal, detected box type: gigablue
  • 2015/06/20 22:18:48 0 s (stat) loadbalancer: can't read from file /tmp/.oscam/stat
  • 2015/06/20 22:18:48 0 s (main) waiting for local card init
  • 2015/06/20 22:18:48 54CA70 r (reader) skylink_irdeto [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=600, cardmhz=600)
  • 2015/06/20 22:18:48 54CA70 r (reader) skylink_irdeto [internal] Reader sci internal, detected box type: gigablue
  • 2015/06/20 22:18:48 54D348 r key file not found in: /etc/tuxbox/config/oscam_gigablue
  • 2015/06/20 22:18:48 54D348 r key file not found in: /var/keys
  • 2015/06/20 22:18:48 54D348 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
  • 2015/06/20 22:18:48 76E00468 h (webif) webif: decompressed 193840 bytes back into 400864 bytes
  • 2015/06/20 22:18:48 76E00468 h (webif) HTTP Server running. ip=0.0.0.0 port=83
  • 2015/06/20 22:18:49 54D348 r (reader) emulator [emu] card detected
  • 2015/06/20 22:18:49 54CA70 r (reader) skylink_irdeto [internal] card detected
  • 2015/06/20 22:18:49 54C5A0 r (reader) orf [internal] card detected
  • 2015/06/20 22:18:50 54C5A0 r (reader) orf [internal] ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00
  • 2015/06/20 22:18:50 54D348 r (reader) emulator [emu] found card system emu
  • 2015/06/20 22:18:50 54D348 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
  • 2015/06/20 22:18:50 54D348 r key file not found in: /etc/tuxbox/config/oscam_gigablue
  • 2015/06/20 22:18:50 54D348 r key file not found in: /var/keys
  • 2015/06/20 22:18:55 54C5A0 r (reader) orf [internal] Buffers readed 0 bytes total time_us 4999889
  • 2015/06/20 22:18:55 54C5A0 r (reader) orf [internal] Init card protocol T0, FI=1, F=372, D=2, N=0
  • 2015/06/20 22:18:55 54C5A0 r (reader) orf [internal] Calculated work ETU is 37.20 us reader mhz = 500
  • 2015/06/20 22:19:00 54C5A0 r (reader) orf [internal] Buffers readed 0 bytes total time_us 5000524
  • 2015/06/20 22:19:00 54CA70 r (reader) skylink_irdeto [internal] ATR: 3B 9F 11 40 60 49 52 44 45 54 4F 20 41 43 53 20 56 36 2E 30
  • 2015/06/20 22:19:00 54CA70 r (reader) skylink_irdeto [internal] Init card protocol T0, FI=1, F=372, D=1, N=0
  • 2015/06/20 22:19:00 54CA70 r (reader) skylink_irdeto [internal] Calculated work ETU is 74.40 us reader mhz = 500
  • 2015/06/20 22:19:05 54CA70 r (reader) skylink_irdeto [internal] Buffers readed 0 bytes total time_us 4999983
  • 2015/06/20 22:19:05 54C5A0 r (reader) orf [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
  • 2015/06/20 22:19:05 54CA70 r (reader) skylink_irdeto [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
  • 2015/06/20 22:19:06 54C5A0 r (reader) orf [internal] card detected
  • 2015/06/20 22:19:06 54C5A0 r (reader) orf [internal] type: CryptoWorks
  • 2015/06/20 22:19:06 54C5A0 r (reader) orf [internal] type: CryptoWorks, caid: 0D95, ascii serial: #########, hex serial: ##########
  • 2015/06/20 22:19:06 54CA70 r (reader) skylink_irdeto [internal] Hist. Bytes: IRDETO ACS V6.0
  • 2015/06/20 22:19:06 54CA70 r (reader) skylink_irdeto [internal] detect irdeto card
  • 2015/06/20 22:19:06 54CA70 r (reader) skylink_irdeto [internal] caid: 0624, acs: 0.06, country code: CZE
  • 2015/06/20 22:19:07 54CA70 r (reader) skylink_irdeto [internal] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
  • 2015/06/20 22:19:07 54C5A0 r (reader) orf [internal] issuer: CryptoWorks, id: 04, bios: v3, pin: unknown, mfid: 3F00
  • 2015/06/20 22:19:07 54C5A0 r (reader) orf [internal] providers: 4 (04,08,0C,10)
  • 2015/06/20 22:19:07 54C5A0 r (reader) orf [internal] found card system cryptoworks
  • 2015/06/20 22:19:07 54C5A0 r (reader) orf [cryptoworks] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
  • 2015/06/20 22:19:07 54C5A0 r (reader) orf [cryptoworks] provider: 1, id: 04, name: Operator: FFFF
  • 2015/06/20 22:19:07 54CA70 r (reader) skylink_irdeto [internal] WARNING: For Irdeto cards you will have to set 'mhz= 600' in oscam.server
  • 2015/06/20 22:19:07 54C5A0 r (reader) orf [cryptoworks] chid: 000D, date: 2013/06/27 - 2013/07/27, name: Product 000D
  • 2015/06/20 22:19:07 54C5A0 r (reader) orf [cryptoworks] chid: 7FF7, date: 2015/06/20 - 2015/06/30, name: Product 7FF7
  • 2015/06/20 22:19:07 54C5A0 r (reader) orf [cryptoworks] chid: 0001, date: 2015/06/20 - 2016/02/25, name: Product 0001
  • 2015/06/20 22:19:07 54C5A0 r (reader) orf [cryptoworks] chid: 0002, date: 2015/06/15 - 2016/02/20, name: Product 0002
  • 2015/06/20 22:19:07 54C5A0 r (reader) orf [cryptoworks] chid: 7FFB, date: 2015/04/18 - 2015/05/18, name: Product 7FFB
  • 2015/06/20 22:19:07 54CA70 r (reader) skylink_irdeto [internal] active providers: 4 (045038,ffffff,ffffff,ffffff)
  • 2015/06/20 22:19:07 54CA70 r (reader) skylink_irdeto [internal] found card system irdeto
  • 2015/06/20 22:19:07 54CA70 r (reader) skylink_irdeto [irdeto] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
  • 2015/06/20 22:19:07 54C5A0 r (reader) orf [cryptoworks] chid: FFE0, date: 2015/05/24 - 2016/01/29, name: Product FFE0
  • 2015/06/20 22:19:07 54C5A0 r (reader) orf [cryptoworks] chid: FFD8, date: 2014/02/23 - 2014/03/25, name: Product FFD8
  • 2015/06/20 22:19:08 54CA70 r (reader) skylink_irdeto [irdeto] entitlements for provider: 1, id: 045038
  • 2015/06/20 22:19:08 54CA70 r (reader) skylink_irdeto [irdeto] chid: 1392, date: 2015/05/16 - 2015/06/05
  • 2015/06/20 22:19:08 54CA70 r (reader) skylink_irdeto [irdeto] chid: 14B5, date: 2015/05/16 - 2015/05/30
  • 2015/06/20 22:19:08 54C5A0 r (reader) orf [cryptoworks] provider: 2, id: 08, name: Operator: FFFF
  • 2015/06/20 22:19:08 54C5A0 r (reader) orf [cryptoworks] chid: 001D, date: 2013/08/16 - 2013/11/16, name: Product 001D
  • 2015/06/20 22:19:08 54CA70 r (reader) skylink_irdeto [irdeto] ready for requests
  • 2015/06/20 22:19:08 54C5A0 r (reader) orf [cryptoworks] provider: 3, id: 0C, name: Operator: FFFF
  • 2015/06/20 22:19:08 54C5A0 r (reader) orf [cryptoworks] provider: 4, id: 10, name: Operator: FFFF
  • 2015/06/20 22:19:08 54C5A0 r (reader) orf [cryptoworks] chid: 0031, date: 2014/05/29 - 2014/08/29, name: Product 0031
  • 2015/06/20 22:19:08 54C5A0 r (reader) orf [cryptoworks] ready for requests
  • 2015/06/20 22:19:09 0 s (main) init for all local cards done
  • 2015/06/20 22:19:09 0 s (emmcache) loaded 16 emmcache records from /tmp/.oscam/oscam.emmcache in 4 ms
  • 2015/06/20 22:19:09 0 s (emmcache) loaded 16 emmstat records from /tmp/.oscam/oscam.emmstat in 2 ms
  • 2015/06/20 22:19:09 0 s (anticasc) anti cascading disabled
  • 2015/06/20 22:19:09 54FB48 c (client) plain dvbapi-client granted (gigablue, au=auto (3 reader))
  • 2015/06/20 22:19:09 54FB48 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam_gigablue/oscam.ccache
  • 2015/06/20 22:19:09 54FB48 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
  • 2015/06/20 22:19:09 54FB48 c (dvbapi) Demuxer 0 found 0 ECMpids and 3 STREAMpids in PMT
  • 2015/06/20 22:19:09 54FB48 c (dvbapi) Demuxer 0 receiver wants to demux srvid 708A on adapter 0000 camask 0001 index 0000 pmtpid 0190
  • 2015/06/20 22:19:09 54FB48 c (dvbapi) Demuxer 0 new program number: 708A (FFFE:708A unknown) [pmt_list_management 3]

edit: mit diesem boxkey ist das dieses logfile ...

so sieht jetzt mein oscam.server aus

[reader]
label = orf
protocol = internal
device = /dev/sci1
caid = 0D95
detect = cd
mhz = 500
cardmhz = 600
group = 1
emmcache = 1,3,2,0

[reader]
label = skylink_irdeto
enable = 1
protocol = internal
device = /dev/sci0
caid = 0624
force_irdeto = 1
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,1,2
boxkey = 4FD3B1C6E406AA69
rsakey = 2598FE21A1CEF05BBC459F495FCE8F1E811B126FA8933D8DDB6480A93D43CFA7255F009E875814BECF53DA7610D675D20EEBA8A212F9079CBD1D2FAD65362B42
 
Zuletzt bearbeitet von einem Moderator:
AW: ORF und Skylink-Karten werden nicht hell - Gigablue 800 UE Plus

u ich hab auch was gelesen - im log - dass irdetokarten 600mhz im oscam.server haben sollten
Zum Vergrößern anklicken....
hast du doch
cardmhz = 600

wie du die jetzt aktivierst weiß ich nicht
eingelesen wird die ja
wenn du was verstehst:
Sie müssen registriert sein, um Links zu sehen.

ich kann Polnisch aber das ist mir auch zu hoch :dfingers:
 
AW: ORF und Skylink-Karten werden nicht hell - Gigablue 800 UE Plus

karte ist aktiviert u sie ist auch bis ende august bezahlt, hab ich alles gestern schon gecheckt.

die karte kennt er ja,aber diese entitlements fehlen.....
 
AW: ORF und Skylink-Karten werden nicht hell - Gigablue 800 UE Plus

das hab ich vorhin gemacht. war kurz auf skylink u das war das logfile

  • 2015/06/20 22:48:48 54C5A0 r (reader) orf [cryptoworks] provider: 3, id: 0C, name: Operator: FFFF
  • 2015/06/20 22:48:48 54C5A0 r (reader) orf [cryptoworks] provider: 4, id: 10, name: Operator: FFFF
  • 2015/06/20 22:48:48 54C5A0 r (reader) orf [cryptoworks] chid: 0031, date: 2014/05/29 - 2014/08/29, name: Product 0031
  • 2015/06/20 22:48:48 54C5A0 r (reader) orf [cryptoworks] ready for requests
  • 2015/06/20 22:49:00 54CA70 r (reader) skylink_irdeto [internal] WARNING: Total ATR characters received is: 3 instead of expected 14
  • 2015/06/20 22:49:00 54CA70 r (reader) skylink_irdeto [internal] WARNING: ATR is invalid!
  • 2015/06/20 22:49:00 54CA70 r (reader) skylink_irdeto [internal] Deactivating card
  • 2015/06/20 22:49:01 54CA70 r (reader) skylink_irdeto [internal] Read ATR fail, attempt 1/5 fs = 3
  • 2015/06/20 22:49:01 54CA70 r (reader) skylink_irdeto [internal] ATR: 3B 9F 11 40 60 49 52 44 45 54 4F 20 41 43 53 20 56 36 2E 30
  • 2015/06/20 22:49:01 54CA70 r (reader) skylink_irdeto [internal] Init card protocol T0, FI=1, F=372, D=1, N=0
  • 2015/06/20 22:49:01 54CA70 r (reader) skylink_irdeto [internal] Calculated work ETU is 74.40 us reader mhz = 500
  • 2015/06/20 22:49:06 54CA70 r (reader) skylink_irdeto [internal] Buffers readed 0 bytes total time_us 4999465
  • 2015/06/20 22:49:06 54CA70 r (reader) skylink_irdeto [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
  • 2015/06/20 22:49:07 54CA70 r (reader) skylink_irdeto [internal] Hist. Bytes: IRDETO ACS V6.0
  • 2015/06/20 22:49:07 54CA70 r (reader) skylink_irdeto [internal] detect irdeto card
  • 2015/06/20 22:49:07 54CA70 r (reader) skylink_irdeto [internal] caid: 0624, acs: 0.06, country code: CZE
  • 2015/06/20 22:49:08 54CA70 r (reader) skylink_irdeto [internal] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
  • 2015/06/20 22:49:08 54CA70 r (reader) skylink_irdeto [internal] WARNING: For Irdeto cards you will have to set 'mhz= 600' in oscam.server
  • 2015/06/20 22:49:08 54CA70 r (reader) skylink_irdeto [internal] active providers: 4 (045038,ffffff,ffffff,ffffff)
  • 2015/06/20 22:49:08 54CA70 r (reader) skylink_irdeto [internal] found card system irdeto
  • 2015/06/20 22:49:08 54CA70 r (reader) skylink_irdeto [irdeto] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
  • 2015/06/20 22:49:08 54CA70 r (reader) skylink_irdeto [irdeto] entitlements for provider: 1, id: 045038
  • 2015/06/20 22:49:08 54CA70 r (reader) skylink_irdeto [irdeto] chid: 1392, date: 2015/05/16 - 2015/06/05
  • 2015/06/20 22:49:08 54CA70 r (reader) skylink_irdeto [irdeto] chid: 14B5, date: 2015/05/16 - 2015/05/30
  • 2015/06/20 22:49:09 54CA70 r (reader) skylink_irdeto [irdeto] ready for requests
  • 2015/06/20 22:49:09 0 s (main) init for all local cards done
  • 2015/06/20 22:49:09 0 s (anticasc) anti cascading disabled
  • 2015/06/20 22:49:09 54D8A0 c (client) plain dvbapi-client granted (gigablue, au=auto (3 reader))
  • 2015/06/20 22:49:09 54D8A0 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam_gigablue/oscam.ccache
  • 2015/06/20 22:49:09 54D8A0 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
  • 2015/06/20 22:49:41 54D8A0 c (dvbapi) Demuxer 0 found 0 ECMpids and 3 STREAMpids in PMT
  • 2015/06/20 22:49:41 54D8A0 c (dvbapi) Demuxer 0 receiver wants to demux srvid 708A on adapter 0000 camask 0001 index 0000 pmtpid 0190
  • 2015/06/20 22:49:41 54D8A0 c (dvbapi) Demuxer 0 new program number: 708A (FFFE:708A unknown) [pmt_list_management 3]
 
AW: ORF und Skylink-Karten werden nicht hell - Gigablue 800 UE Plus

setze mal in der oscam.dvbapi die Caid an erster stelle

P: 0624 1

und starte neu
 
AW: ORF und Skylink-Karten werden nicht hell - Gigablue 800 UE Plus

mach doch gleich die ganze Box
 
AW: ORF und Skylink-Karten werden nicht hell - Gigablue 800 UE Plus

mach ich dann. leider keine werbung in sicht :emoticon-0105-wink:
 
AW: ORF und Skylink-Karten werden nicht hell - Gigablue 800 UE Plus

das ist jetzt ein teil vom log. orf karte steht im status jetzt als error dort, man kann aber orf schauen, skylink geht noch immer nicht

  • 2015/06/20 23:18:28 54C5A0 r (reader) orf [internal] Flush readed byte Nr 11 value 8f time_us 660
  • 2015/06/20 23:18:28 54C5A0 r (reader) orf [internal] Flush readed byte Nr 12 value f1 time_us 140
  • 2015/06/20 23:18:28 54C5A0 r (reader) orf [internal] Flush readed byte Nr 13 value 90 time_us 269
  • 2015/06/20 23:18:28 54C5A0 r (reader) orf [internal] Flush readed byte Nr 14 value 00 time_us 118
  • 2015/06/20 23:18:28 54CA70 r (reader) skylink_irdeto [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
  • 2015/06/20 23:18:29 54CA70 r (reader) skylink_irdeto [internal] Hist. Bytes: IRDETO ACS V6.0
  • 2015/06/20 23:18:29 54CA70 r (reader) skylink_irdeto [internal] detect irdeto card
  • 2015/06/20 23:18:33 54C5A0 r (reader) orf [internal] Buffers readed 14 bytes total time_us 5115878
  • 2015/06/20 23:18:43 54C5A0 r (reader) orf [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
  • 2015/06/20 23:18:44 54C5A0 r (reader) orf [internal] card detected
  • 2015/06/20 23:18:44 54C5A0 r (reader) orf [internal] type: CryptoWorks
  • 2015/06/20 23:19:03 54CA70 r (reader) skylink_irdeto [internal] caid: 0000, acs: 0.00, country code:
  • 2015/06/20 23:19:03 54C5A0 r (reader) orf [internal] card system not supported
  • 2015/06/20 23:19:03 54C5A0 r (reader) orf [internal] Normal mode failed, reverting to Deprecated Mode
  • 2015/06/20 23:19:03 54CA70 r (reader) skylink_irdeto [internal] providers: 0, ascii serial: , hex serial: ######, hex base: ##
  • 2015/06/20 23:19:03 54CA70 r (reader) skylink_irdeto [internal] WARNING: For Irdeto cards you will have to set 'mhz= 600' in oscam.server
  • 2015/06/20 23:19:03 54CA70 r (reader) skylink_irdeto [internal] found card system irdeto
  • 2015/06/20 23:19:03 54CA70 r (reader) skylink_irdeto [irdeto] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
  • 2015/06/20 23:19:03 54CA70 r (reader) skylink_irdeto [irdeto] ready for requests
  • 2015/06/20 23:19:03 54C5A0 r (reader) orf [internal] ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00
  • 2015/06/20 23:19:03 54C5A0 r (reader) orf [internal] Init card protocol T0, FI=1, F=372, D=2, N=0
  • 2015/06/20 23:19:03 54C5A0 r (reader) orf [internal] Calculated work ETU is 74.40 us reader mhz = 500
  • 2015/06/20 23:19:08 54C5A0 r (reader) orf [internal] Buffers readed 0 bytes total time_us 5000441
  • 2015/06/20 23:19:14 54C5A0 r (reader) orf [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
  • 2015/06/20 23:19:15 54C5A0 r (reader) orf [internal] card detected
  • 2015/06/20 23:19:15 54C5A0 r (reader) orf [internal] type: CryptoWorks
  • 2015/06/20 23:19:24 54C5A0 r (reader) orf [internal] card system not supported
  • 2015/06/20 23:19:24 54C5A0 r (reader) orf [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
  • 2015/06/20 23:19:24 54C5A0 r (reader) orf [internal] card initializing error
  • 2015/06/20 23:19:24 0 s (main) init for all local cards done
  • 2015/06/20 23:19:24 0 s (anticasc) anti cascading disabled
  • 2015/06/20 23:19:24 54E808 c (client) plain dvbapi-client granted (gigablue, au=auto (3 reader))
  • 2015/06/20 23:19:24 54E808 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam_gigablue/oscam.ccache
  • 2015/06/20 23:19:24 54E808 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
  • 2015/06/20 23:19:25 54E808 c (dvbapi) Demuxer 0 found 0 ECMpids and 3 STREAMpids in PMT
  • 2015/06/20 23:19:25 54E808 c (dvbapi) Demuxer 0 receiver wants to demux srvid 708A on adapter 0000 camask 0001 index 0000 pmtpid 0190
  • 2015/06/20 23:19:25 54E808 c (dvbapi) Demuxer 0 new program number: 708A (FFFE:708A unknown) [pmt_list_management 3]

- - - - - - - - - -

bis morgen. ich werde jetzt mal den skylink-reader-text speichern u nur den funktionierenden orf text im server lassen.
 
Du musst dich einloggen oder registrieren, um hier zu antworten.

Ähnliche Themen

I
Vu+ ,Gigablue HD+ hell bekommen möglich?
Antworten
7
Aufrufe
550
DEB ChatGPT
H
Keine Empfang von EMMs mit ORF Karte (K2XXXXXXXXXXXXX)
2
Antworten
18
Aufrufe
1K
Kind regards
gelöst ORF (0D98) lwird nicht hell?
3 4 5
Antworten
72
Aufrufe
4K
leyla38
W
gelöst ORF
2
Antworten
25
Aufrufe
2K
Token
T
bekomme meine P410 ORF Karte einfach nicht zum laufen.
Antworten
6
Aufrufe
2K
Token
T
Menü
Anmelden
Registrieren
Für die Nutzung dieser Website sind Cookies erforderlich. Du musst diese akzeptieren, um die Website weiter nutzen zu können. Erfahre mehr…