Mgcamd Client soll an Oscam Server, klappt nicht

[dolce82]

Hallo zusammen,

allen vorab noch ein gutes neues Jahr!

Nun zu meinem Problem, ich habe eine DM800 welche bereits als Oscam-Server 1.20 super läuft.

Ferguson Ariva 102 Mini HD hängen als Clients dran über newcamd.

Jetzt habe ich noch einen Octagon SF 918 SE+ HD Difference, den ich gestern vergebens 9 Stunden versucht habe als Client einzurichten.

Zu den Configs am Server:

oscam.conf

Spoiler

[global]
disablelog = 0
disableuserfile = 0
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
bindwait = 120
netprio = 0
clientdyndns = 0
resolvedelay = 30
unlockparental = 0
nice = -1
serialreadertimeout = 1500
maxlogsize = 5
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5
readerautoloadbalance = 0
readerautoloadbalance_save = 0
resolvegethostbyname = 0
#LogFile = /etc/tuxbox/config/log/oscam.log

[monitor]
port = 988
nocrypt =
aulow = 120
hideclient_to = 0
monlevel = 4
appendchaninfo = 0

[newcamd]
port = 15040@098C:000000
key = 0102030405060708091011121314
allowed =
keepalive = 1
mgclient = 0

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = ich
pmt_mode = 0



[webif]
httpport = 15001
httprefresh = 7
httpallowed = 192.168.0.0-192.168.255.255,127.0.0.1
httphideidleclients = 0
httpreadonly = 0

[anticasc]
enabled = 1
numusers = 1
sampletime = 2
samples = 10
penalty = 0
aclogfile = ./oscam_ac.log
denysamples = 8
fakedelay = 1000

oscam.server

Spoiler

[reader]
label = V14
protocol = internal
device = /dev/sci0
caid = 098C
boxid = 12345678
ins7e11 = 15
ecmwhitelist = 098C:98,9B,97,57,91
detect = cd
mhz = 1
cardmhz = 2700
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
blockemm-bylen = 1-31,36,38,40,42-44,65-72,74-124,126-127,131,141-255
ndsversion = 2

oscam.user

Spoiler

[account]
user = dd
pwd = bbb
caid = 098C
uniq = 3
au = 1
group = 1
cccmaxhops = 0
cccreshare = 0

[account]
user = aa
pwd = bbb
caid = 098C
uniq = 3
au = 1
group = 1
cccmaxhops = 0
cccreshare = 0

[account]
user = bb
pwd = bbb
au = 1
group = 1

[account]
user = cc
pwd = bbb
group = 1

wie gesagt der Server läuft und shared an die bisherigen Clients komplett Freezerfrei und ohne Probleme.


Nun zu den Configs des Octagon der mit Mgcamd 1.38 läuft:

mg_cfg

Spoiler

# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 00 }

# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }

# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 02 }

# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 }

# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 01 }

# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 00

# network ecm timeout in seconds
K: { 05 }

# newcamd dead routes connect retry, sec
Q: { 600 }

# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 newcamd, camd3, radegast, cccamd, gbox
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 00 }

# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } root

# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80

# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 03 } 000.000.000.000 514 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 00 }

# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-******
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 12 stapi/octagon
B: { 12 }


# map all 180x nagra caids to 1801
# default is 01
#F: { 00 }

newcamd.list

Spoiler

CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 15040
CWS = xxxx.dyndns.tv 15040 cc bbb 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs

Solltet Ihr noch irgendwelche Configs oder Infos brauchen gebt mir einfach kurz bescheid!!

Vielen Dank vorab!

 

[zwergnase84]

AW: Mgcamd Client soll an Oscam Server, klappt nicht

und warum leuft der Octagon SF 918 nicht mit cccam ?

richte doch alles im webif von oscam ein. und wenn du nicht weist wie der richtige Eintrag für Port lautet ist einfach nur links die Hilfe anzuklicken.

 

[dolce82]

AW: Mgcamd Client soll an Oscam Server, klappt nicht

Gerne kann ich auch cccam aud den octagon spielen, nur kann ich newcamd und cccam dann gleichzeitig in der oscam.conf stehen haben??

so, habe nun die oscam.conf angepasst, wie gehts jetzt weiter?

Spoiler

[global]
logfile = /dev/tty
nice = -1
waitforcards = 1
preferlocalcards = 1

[newcamd]
port = 15040@098C:000000
key = 0102030405060708091011121314
keepalive = 1

[cccam]
port = 15000
nodeid = 34E18CA0104314C8
version = 2.3.0

[dvbapi]
enabled = 1
au = 1
user = ich
boxtype = dreambox

[monitor]
port = 988
aulow = 120
monlevel = 4
hideclient_to = 0

[webif]
httpport = 15001
httprefresh = 7
httpallowed = 192.168.0.0-192.168.255.255,127.0.0.1
aulow = 120
hideclient_to = 0

hab auf den octagon nun cccam aufgespielt

 

[hwmmc]

AW: Mgcamd Client soll an Oscam Server, klappt nicht

[newcamd]
port                          = 15040@098C:000000
key                           = 0102030405060708091011121314
allowed                       = 
keepalive                     = 1
[COLOR=#ff0000]mgclient                      = 0[/COLOR]

 

[dolce82]

AW: Mgcamd Client soll an Oscam Server, klappt nicht

ok, habe ich gerade am Server geändert.

was muss ich nun am client machen bzw. eintragen?

 

[zwergnase84]

AW: Mgcamd Client soll an Oscam Server, klappt nicht

cccam.cfg

C:IP Port User Passw

 

[dolce82]

AW: Mgcamd Client soll an Oscam Server, klappt nicht

ok, klappt soweit wenn ich die IP vom Server im Heimnetzwerk eingebe.

Wenn ich aber anstatt der IP die dyndns meines Servers (der im selben Netzwerk hängt eingebe, dann connectet der client als anonymous und wird so als user nicht erkannt und bleibt dunkel)

Ist das weil der Server im selben Netzwerk steht?

Den Client bekommt ein Freund, deshalb meine Frage! Er greift dann ganz normal per dyndns ausserhalb meines Heimnetzwerks auf meinen Server zu.